Skip to content

L
linux
Commit 13bbd8d9 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc 

* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (25 commits)
  [POWERPC] Add support for the mpc832x mds board
  [POWERPC] Add initial support for the e300c2 core
  [POWERPC] Add MPC8360EMDS default dts file
  [POWERPC] Add MPC8360EMDS board support
  [POWERPC] Add QUICC Engine (QE) infrastructure
  [POWERPC] Add QE device tree node definition
  [POWERPC] Don't try to just continue if xmon has no input device
  [POWERPC] Fix a printk in pseries_mpic_init_IRQ
  [POWERPC] Get default baud rate in udbg_scc
  [POWERPC] Fix zImage.coff on oldworld PowerMac
  [POWERPC] Fix xmon=off and cleanup xmon initialisation
  [POWERPC] Cleanup include/asm-powerpc/xmon.h
  [POWERPC] Update swim3 printk after blkdev.h change
  [POWERPC] Cell interrupt rework
  POWERPC: mpc82xx merge: board-specific/platform stuff(resend)
  POWERPC: 8272ads merge to powerpc: common stuff
  POWERPC: Added devicetree for mpc8272ads board
  [POWERPC] iSeries has no legacy I/O
  [POWERPC] implement BEGIN/END_FW_FTR_SECTION
  [POWERPC] iSeries does not need pcibios_fixup_resources
  ...
parents 18e6756a 9020fc96
Hide whitespace changes
Inline Side-by-side
Showing with 7809 additions and 304 deletions
Documentation/powerpc/booting-without-of.txt
View file @ 13bbd8d9
......@@ -1440,6 +1440,258 @@ platforms are moved over to use the flattened-device-tree model.
descriptor-types-mask = <012b0ebf>;
};
h) Board Control and Status (BCSR)
Required properties:
- device_type : Should be "board-control"
- reg : Offset and length of the register set for the device
Example:
bcsr@f8000000 {
device_type = "board-control";
reg = <f8000000 8000>;
};
i) Freescale QUICC Engine module (QE)
This represents qe module that is installed on PowerQUICC II Pro.
Hopefully it will merge backward compatibility with CPM/CPM2.
Basically, it is a bus of devices, that could act more or less
as a complete entity (UCC, USB etc ). All of them should be siblings on
the "root" qe node, using the common properties from there.
The description below applies to the the qe of MPC8360 and
more nodes and properties would be extended in the future.
i) Root QE device
Required properties:
- device_type : should be "qe";
- model : precise model of the QE, Can be "QE", "CPM", or "CPM2"
- reg : offset and length of the device registers.
- bus-frequency : the clock frequency for QUICC Engine.
Recommended properties
- brg-frequency : the internal clock source frequency for baud-rate
generators in Hz.
Example:
qe@e0100000 {
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
device_type = "qe";
model = "QE";
ranges = <0 e0100000 00100000>;
reg = <e0100000 480>;
brg-frequency = <0>;
bus-frequency = <179A7B00>;
}
ii) SPI (Serial Peripheral Interface)
Required properties:
- device_type : should be "spi".
- compatible : should be "fsl_spi".
- mode : the spi operation mode, it can be "cpu" or "qe".
- reg : Offset and length of the register set for the device
- interrupts : <a b> where a is the interrupt number and b is a
field that represents an encoding of the sense and level
information for the interrupt. This should be encoded based on
the information in section 2) depending on the type of interrupt
controller you have.
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
Example:
spi@4c0 {
device_type = "spi";
compatible = "fsl_spi";
reg = <4c0 40>;
interrupts = <82 0>;
interrupt-parent = <700>;
mode = "cpu";
};
iii) USB (Universal Serial Bus Controller)
Required properties:
- device_type : should be "usb".
- compatible : could be "qe_udc" or "fhci-hcd".
- mode : the could be "host" or "slave".
- reg : Offset and length of the register set for the device
- interrupts : <a b> where a is the interrupt number and b is a
field that represents an encoding of the sense and level
information for the interrupt. This should be encoded based on
the information in section 2) depending on the type of interrupt
controller you have.
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
Example(slave):
usb@6c0 {
device_type = "usb";
compatible = "qe_udc";
reg = <6c0 40>;
interrupts = <8b 0>;
interrupt-parent = <700>;
mode = "slave";
};
iv) UCC (Unified Communications Controllers)
Required properties:
- device_type : should be "network", "hldc", "uart", "transparent"
"bisync" or "atm".
- compatible : could be "ucc_geth" or "fsl_atm" and so on.
- model : should be "UCC".
- device-id : the ucc number(1-8), corresponding to UCCx in UM.
- reg : Offset and length of the register set for the device
- interrupts : <a b> where a is the interrupt number and b is a
field that represents an encoding of the sense and level
information for the interrupt. This should be encoded based on
the information in section 2) depending on the type of interrupt
controller you have.
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
- pio-handle : The phandle for the Parallel I/O port configuration.
- rx-clock : represents the UCC receive clock source.
0x00 : clock source is disabled;
0x1~0x10 : clock source is BRG1~BRG16 respectively;
0x11~0x28: clock source is QE_CLK1~QE_CLK24 respectively.
- tx-clock: represents the UCC transmit clock source;
0x00 : clock source is disabled;
0x1~0x10 : clock source is BRG1~BRG16 respectively;
0x11~0x28: clock source is QE_CLK1~QE_CLK24 respectively.
Required properties for network device_type:
- mac-address : list of bytes representing the ethernet address.
- phy-handle : The phandle for the PHY connected to this controller.
Example:
ucc@2000 {
device_type = "network";
compatible = "ucc_geth";
model = "UCC";
device-id = <1>;
reg = <2000 200>;
interrupts = <a0 0>;
interrupt-parent = <700>;
mac-address = [ 00 04 9f 00 23 23 ];
rx-clock = "none";
tx-clock = "clk9";
phy-handle = <212000>;
pio-handle = <140001>;
};
v) Parallel I/O Ports
This node configures Parallel I/O ports for CPUs with QE support.
The node should reside in the "soc" node of the tree. For each
device that using parallel I/O ports, a child node should be created.
See the definition of the Pin configuration nodes below for more
information.
Required properties:
- device_type : should be "par_io".
- reg : offset to the register set and its length.
- num-ports : number of Parallel I/O ports
Example:
par_io@1400 {
reg = <1400 100>;
#address-cells = <1>;
#size-cells = <0>;
device_type = "par_io";
num-ports = <7>;
ucc_pin@01 {
......
};
vi) Pin configuration nodes
Required properties:
- linux,phandle : phandle of this node; likely referenced by a QE
device.
- pio-map : array of pin configurations. Each pin is defined by 6
integers. The six numbers are respectively: port, pin, dir,
open_drain, assignment, has_irq.
- port : port number of the pin; 0-6 represent port A-G in UM.
- pin : pin number in the port.
- dir : direction of the pin, should encode as follows:
0 = The pin is disabled
1 = The pin is an output
2 = The pin is an input
3 = The pin is I/O
- open_drain : indicates the pin is normal or wired-OR:
0 = The pin is actively driven as an output
1 = The pin is an open-drain driver. As an output, the pin is
driven active-low, otherwise it is three-stated.
- assignment : function number of the pin according to the Pin Assignment
tables in User Manual. Each pin can have up to 4 possible functions in
QE and two options for CPM.
- has_irq : indicates if the pin is used as source of exteral
interrupts.
Example:
ucc_pin@01 {
linux,phandle = <140001>;
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 3 1 0 1 0 /* TxD0 */
0 4 1 0 1 0 /* TxD1 */
0 5 1 0 1 0 /* TxD2 */
0 6 1 0 1 0 /* TxD3 */
1 6 1 0 3 0 /* TxD4 */
1 7 1 0 1 0 /* TxD5 */
1 9 1 0 2 0 /* TxD6 */
1 a 1 0 2 0 /* TxD7 */
0 9 2 0 1 0 /* RxD0 */
0 a 2 0 1 0 /* RxD1 */
0 b 2 0 1 0 /* RxD2 */
0 c 2 0 1 0 /* RxD3 */
0 d 2 0 1 0 /* RxD4 */
1 1 2 0 2 0 /* RxD5 */
1 0 2 0 2 0 /* RxD6 */
1 4 2 0 2 0 /* RxD7 */
0 7 1 0 1 0 /* TX_EN */
0 8 1 0 1 0 /* TX_ER */
0 f 2 0 1 0 /* RX_DV */
0 10 2 0 1 0 /* RX_ER */
0 0 2 0 1 0 /* RX_CLK */
2 9 1 0 3 0 /* GTX_CLK - CLK10 */
2 8 2 0 1 0>; /* GTX125 - CLK9 */
};
vii) Multi-User RAM (MURAM)
Required properties:
- device_type : should be "muram".
- mode : the could be "host" or "slave".
- ranges : Should be defined as specified in 1) to describe the
translation of MURAM addresses.
- data-only : sub-node which defines the address area under MURAM
bus that can be allocated as data/parameter
Example:
muram@10000 {
device_type = "muram";
ranges = <0 00010000 0000c000>;
data-only@0{
reg = <0 c000>;
};
};
More devices will be defined as this spec matures.
......
arch/powerpc/Kconfig
View file @ 13bbd8d9
......@@ -338,10 +338,6 @@ config PPC_MULTIPLATFORM
RS/6000 machine, an Apple machine, or a PReP, CHRP,
Maple or Cell-based machine.
config PPC_ISERIES
bool "IBM Legacy iSeries"
depends on PPC64
config EMBEDDED6xx
bool "Embedded 6xx/7xx/7xxx-based board"
depends on PPC32 && (BROKEN||BROKEN_ON_SMP)
......@@ -355,6 +351,16 @@ config APUS
<http://linux-apus.sourceforge.net/>.
endchoice
config QUICC_ENGINE
bool
depends on PPC_MPC836x || PPC_MPC832x
default y
help
The QUICC Engine (QE) is a new generation of communications
coprocessors on Freescale embedded CPUs (akin to CPM in older chips).
Selecting this option means that you wish to build a kernel
for a machine with a QE coprocessor.
config PPC_PSERIES
depends on PPC_MULTIPLATFORM && PPC64
bool "IBM pSeries & new (POWER5-based) iSeries"
......@@ -365,6 +371,10 @@ config PPC_PSERIES
select PPC_UDBG_16550
default y
config PPC_ISERIES
bool "IBM Legacy iSeries"
depends on PPC_MULTIPLATFORM && PPC64
config PPC_CHRP
bool "Common Hardware Reference Platform (CHRP) based machines"
depends on PPC_MULTIPLATFORM && PPC32
......@@ -594,6 +604,7 @@ endmenu
source arch/powerpc/platforms/embedded6xx/Kconfig
source arch/powerpc/platforms/4xx/Kconfig
source arch/powerpc/platforms/82xx/Kconfig
source arch/powerpc/platforms/83xx/Kconfig
source arch/powerpc/platforms/85xx/Kconfig
source arch/powerpc/platforms/86xx/Kconfig
......@@ -1058,6 +1069,8 @@ source "fs/Kconfig"
# XXX source "arch/ppc/8260_io/Kconfig"
source "arch/powerpc/sysdev/qe_lib/Kconfig"
source "arch/powerpc/platforms/iseries/Kconfig"
source "lib/Kconfig"
......
arch/powerpc/boot/dts/mpc8272ads.dts 0 → 100644
View file @ 13bbd8d9
/*
* MPC8272 ADS Device Tree Source
*
* Copyright 2005 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/ {
model = "MPC8272ADS";
compatible = "MPC8260ADS";
#address-cells = <1>;
#size-cells = <1>;
linux,phandle = <100>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
linux,phandle = <200>;
PowerPC,8272@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <20>; // 32 bytes
i-cache-line-size = <20>; // 32 bytes
d-cache-size = <4000>; // L1, 16K
i-cache-size = <4000>; // L1, 16K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
32-bit;
linux,phandle = <201>;
linux,boot-cpu;
};
};
interrupt-controller@f8200000 {
linux,phandle = <f8200000>;
#address-cells = <0>;
#interrupt-cells = <2>;
interrupt-controller;
reg = <f8200000 f8200004>;
built-in;
device_type = "pci-pic";
};
memory {
device_type = "memory";
linux,phandle = <300>;
reg = <00000000 4000000 f4500000 00000020>;
};
soc8272@f0000000 {
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
device_type = "soc";
ranges = < 0 0 2 00000000 f0000000 00053000>;
reg = <f0000000 0>;
mdio@0 {
device_type = "mdio";
compatible = "fs_enet";
reg = <0 0>;
linux,phandle = <24520>;
#address-cells = <1>;
#size-cells = <0>;
ethernet-phy@0 {
linux,phandle = <2452000>;
interrupt-parent = <10c00>;
interrupts = <19 1>;
reg = <0>;
bitbang = [ 12 12 13 02 02 01 ];
device_type = "ethernet-phy";
};
ethernet-phy@1 {
linux,phandle = <2452001>;
interrupt-parent = <10c00>;
interrupts = <19 1>;
bitbang = [ 12 12 13 02 02 01 ];
reg = <3>;
device_type = "ethernet-phy";
};
};
ethernet@24000 {
#address-cells = <1>;
#size-cells = <0>;
device_type = "network";
device-id = <2>;
compatible = "fs_enet";
model = "FCC";
reg = <11300 20 8400 100 11380 30>;
mac-address = [ 00 11 2F 99 43 54 ];
interrupts = <20 2>;
interrupt-parent = <10c00>;
phy-handle = <2452000>;
rx-clock = <13>;
tx-clock = <12>;
};
ethernet@25000 {
device_type = "network";
device-id = <3>;
compatible = "fs_enet";
model = "FCC";
reg = <11320 20 8500 100 113b0 30>;
mac-address = [ 00 11 2F 99 44 54 ];
interrupts = <21 2>;
interrupt-parent = <10c00>;
phy-handle = <2452001>;
rx-clock = <17>;
tx-clock = <18>;
};
cpm@f0000000 {
linux,phandle = <f0000000>;
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
device_type = "cpm";
model = "CPM2";
ranges = <00000000 00000000 3ffff>;
reg = <10d80 3280>;
command-proc = <119c0>;
brg-frequency = <17D7840>;
cpm_clk = <BEBC200>;
scc@11a00 {
device_type = "serial";
compatible = "cpm_uart";
model = "SCC";
device-id = <2>;
reg = <11a00 20 8000 100>;
current-speed = <1c200>;
interrupts = <28 2>;
interrupt-parent = <10c00>;
clock-setup = <0 00ffffff>;
rx-clock = <1>;
tx-clock = <1>;
};
scc@11a60 {
device_type = "serial";
compatible = "cpm_uart";
model = "SCC";
device-id = <5>;
reg = <11a60 20 8300 100>;
current-speed = <1c200>;
interrupts = <2b 2>;
interrupt-parent = <10c00>;
clock-setup = <1b ffffff00>;
rx-clock = <4>;
tx-clock = <4>;
};
};
interrupt-controller@10c00 {
linux,phandle = <10c00>;
#address-cells = <0>;
#interrupt-cells = <2>;
interrupt-controller;
reg = <10c00 80>;
built-in;
device_type = "cpm-pic";
compatible = "CPM2";
};
pci@0500 {
linux,phandle = <0500>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "8272";
device_type = "pci";
reg = <10430 4dc>;
clock-frequency = <3f940aa>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x16 */
b000 0 0 1 f8200000 40 0
b000 0 0 2 f8200000 41 0
b000 0 0 3 f8200000 42 0
b000 0 0 4 f8200000 43 0
/* IDSEL 0x17 */
b800 0 0 1 f8200000 43 0
b800 0 0 2 f8200000 40 0
b800 0 0 3 f8200000 41 0
b800 0 0 4 f8200000 42 0
/* IDSEL 0x18 */
c000 0 0 1 f8200000 42 0
c000 0 0 2 f8200000 43 0
c000 0 0 3 f8200000 40 0
c000 0 0 4 f8200000 41 0>;
interrupt-parent = <10c00>;
interrupts = <14 3>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 40000000
01000000 0 00000000 f6000000 0 02000000>;
};
/* May need to remove if on a part without crypto engine */
crypto@30000 {
device_type = "crypto";
model = "SEC2";
compatible = "talitos";
reg = <30000 10000>;
interrupts = <b 0>;
interrupt-parent = <10c00>;
num-channels = <4>;
channel-fifo-len = <18>;
exec-units-mask = <0000007e>;
/* desc mask is for rev1.x, we need runtime fixup for >=2.x */
descriptor-types-mask = <01010ebf>;
};
};
};
arch/powerpc/boot/dts/mpc8360emds.dts 0 → 100644
View file @ 13bbd8d9
/*
* MPC8360E EMDS Device Tree Source
*
* Copyright 2006 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/*
/memreserve/ 00000000 1000000;
*/
/ {
model = "MPC8360EPB";
compatible = "MPC83xx";
#address-cells = <1>;
#size-cells = <1>;
linux,phandle = <100>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
linux,phandle = <200>;
PowerPC,8360@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <20>; // 32 bytes
i-cache-line-size = <20>; // 32 bytes
d-cache-size = <8000>; // L1, 32K
i-cache-size = <8000>; // L1, 32K
timebase-frequency = <3EF1480>;
bus-frequency = <FBC5200>;
clock-frequency = <1F78A400>;
32-bit;
linux,phandle = <201>;
linux,boot-cpu;
};
};
memory {
device_type = "memory";
linux,phandle = <300>;
reg = <00000000 10000000>;
};
bcsr@f8000000 {
device_type = "board-control";
reg = <f8000000 8000>;
};
soc8360@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
device_type = "soc";
ranges = <0 e0000000 00100000>;
reg = <e0000000 00000200>;
bus-frequency = <FBC5200>;
wdt@200 {
device_type = "watchdog";
compatible = "mpc83xx_wdt";
reg = <200 100>;
};
i2c@3000 {
device_type = "i2c";
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <e 8>;
interrupt-parent = <700>;
dfsrr;
};
i2c@3100 {
device_type = "i2c";
compatible = "fsl-i2c";
reg = <3100 100>;
interrupts = <f 8>;
interrupt-parent = <700>;
dfsrr;
};
serial@4500 {
device_type = "serial";
compatible = "ns16550";
reg = <4500 100>;
clock-frequency = <FBC5200>;
interrupts = <9 8>;
interrupt-parent = <700>;
};
serial@4600 {
device_type = "serial";
compatible = "ns16550";
reg = <4600 100>;
clock-frequency = <FBC5200>;
interrupts = <a 8>;
interrupt-parent = <700>;
};
crypto@30000 {
device_type = "crypto";
model = "SEC2";
compatible = "talitos";
reg = <30000 10000>;
interrupts = <b 8>;
interrupt-parent = <700>;
num-channels = <4>;
channel-fifo-len = <18>;
exec-units-mask = <0000007e>;
/* desc mask is for rev1.x, we need runtime fixup for >=2.x */
descriptor-types-mask = <01010ebf>;
};
pci@8500 {
linux,phandle = <8500>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 AD17 */
8800 0 0 1 700 14 8
8800 0 0 2 700 15 8
8800 0 0 3 700 16 8
8800 0 0 4 700 17 8
/* IDSEL 0x12 AD18 */
9000 0 0 1 700 16 8
9000 0 0 2 700 17 8
9000 0 0 3 700 14 8
9000 0 0 4 700 15 8
/* IDSEL 0x13 AD19 */
9800 0 0 1 700 17 8
9800 0 0 2 700 14 8
9800 0 0 3 700 15 8
9800 0 0 4 700 16 8
/* IDSEL 0x15 AD21*/
a800 0 0 1 700 14 8
a800 0 0 2 700 15 8
a800 0 0 3 700 16 8
a800 0 0 4 700 17 8
/* IDSEL 0x16 AD22*/
b000 0 0 1 700 17 8
b000 0 0 2 700 14 8
b000 0 0 3 700 15 8
b000 0 0 4 700 16 8
/* IDSEL 0x17 AD23*/
b800 0 0 1 700 16 8
b800 0 0 2 700 17 8
b800 0 0 3 700 14 8
b800 0 0 4 700 15 8
/* IDSEL 0x18 AD24*/
c000 0 0 1 700 15 8
c000 0 0 2 700 16 8
c000 0 0 3 700 17 8
c000 0 0 4 700 14 8>;
interrupt-parent = <700>;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <02000000 0 a0000000 a0000000 0 10000000
42000000 0 80000000 80000000 0 10000000
01000000 0 00000000 e2000000 0 00100000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <8500 100>;
compatible = "83xx";
device_type = "pci";
};
pic@700 {
linux,phandle = <700>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <700 100>;
built-in;
device_type = "ipic";
};
par_io@1400 {
reg = <1400 100>;
device_type = "par_io";
num-ports = <7>;
ucc_pin@01 {
linux,phandle = <140001>;
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 3 1 0 1 0 /* TxD0 */
0 4 1 0 1 0 /* TxD1 */
0 5 1 0 1 0 /* TxD2 */
0 6 1 0 1 0 /* TxD3 */
1 6 1 0 3 0 /* TxD4 */
1 7 1 0 1 0 /* TxD5 */
1 9 1 0 2 0 /* TxD6 */
1 a 1 0 2 0 /* TxD7 */
0 9 2 0 1 0 /* RxD0 */
0 a 2 0 1 0 /* RxD1 */
0 b 2 0 1 0 /* RxD2 */
0 c 2 0 1 0 /* RxD3 */
0 d 2 0 1 0 /* RxD4 */
1 1 2 0 2 0 /* RxD5 */
1 0 2 0 2 0 /* RxD6 */
1 4 2 0 2 0 /* RxD7 */
0 7 1 0 1 0 /* TX_EN */
0 8 1 0 1 0 /* TX_ER */
0 f 2 0 1 0 /* RX_DV */
0 10 2 0 1 0 /* RX_ER */
0 0 2 0 1 0 /* RX_CLK */
2 9 1 0 3 0 /* GTX_CLK - CLK10 */
2 8 2 0 1 0>; /* GTX125 - CLK9 */
};
ucc_pin@02 {
linux,phandle = <140002>;
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 11 1 0 1 0 /* TxD0 */
0 12 1 0 1 0 /* TxD1 */
0 13 1 0 1 0 /* TxD2 */
0 14 1 0 1 0 /* TxD3 */
1 2 1 0 1 0 /* TxD4 */
1 3 1 0 2 0 /* TxD5 */
1 5 1 0 3 0 /* TxD6 */
1 8 1 0 3 0 /* TxD7 */
0 17 2 0 1 0 /* RxD0 */
0 18 2 0 1 0 /* RxD1 */
0 19 2 0 1 0 /* RxD2 */
0 1a 2 0 1 0 /* RxD3 */
0 1b 2 0 1 0 /* RxD4 */
1 c 2 0 2 0 /* RxD5 */
1 d 2 0 3 0 /* RxD6 */
1 b 2 0 2 0 /* RxD7 */
0 15 1 0 1 0 /* TX_EN */
0 16 1 0 1 0 /* TX_ER */
0 1d 2 0 1 0 /* RX_DV */
0 1e 2 0 1 0 /* RX_ER */
0 1f 2 0 1 0 /* RX_CLK */
2 2 1 0 2 0 /* GTX_CLK - CLK10 */
2 3 2 0 1 0 /* GTX125 - CLK4 */
0 1 3 0 2 0 /* MDIO */
0 2 1 0 1 0>; /* MDC */
};
};
};
qe@e0100000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "qe";
model = "QE";
ranges = <0 e0100000 00100000>;
reg = <e0100000 480>;
brg-frequency = <0>;
bus-frequency = <179A7B00>;
muram@10000 {
device_type = "muram";
ranges = <0 00010000 0000c000>;
data-only@0{
reg = <0 c000>;
};
};
spi@4c0 {
device_type = "spi";
compatible = "fsl_spi";
reg = <4c0 40>;
interrupts = <2>;
interrupt-parent = <80>;
mode = "cpu";
};
spi@500 {
device_type = "spi";
compatible = "fsl_spi";
reg = <500 40>;
interrupts = <1>;
interrupt-parent = <80>;
mode = "cpu";
};
usb@6c0 {
device_type = "usb";
compatible = "qe_udc";
reg = <6c0 40 8B00 100>;
interrupts = <b>;
interrupt-parent = <80>;
mode = "slave";
};
ucc@2000 {
device_type = "network";
compatible = "ucc_geth";
model = "UCC";
device-id = <1>;
reg = <2000 200>;
interrupts = <20>;
interrupt-parent = <80>;
mac-address = [ 00 04 9f 00 23 23 ];
rx-clock = <0>;
tx-clock = <19>;
phy-handle = <212000>;
pio-handle = <140001>;
};
ucc@3000 {
device_type = "network";
compatible = "ucc_geth";
model = "UCC";
device-id = <2>;
reg = <3000 200>;
interrupts = <21>;
interrupt-parent = <80>;
mac-address = [ 00 11 22 33 44 55 ];
rx-clock = <0>;
tx-clock = <14>;
phy-handle = <212001>;
pio-handle = <140002>;
};
mdio@2120 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2120 18>;
device_type = "mdio";
compatible = "ucc_geth_phy";
ethernet-phy@00 {
linux,phandle = <212000>;
interrupt-parent = <700>;
interrupts = <11 2>;
reg = <0>;
device_type = "ethernet-phy";
interface = <6>; //ENET_1000_GMII
};
ethernet-phy@01 {
linux,phandle = <212001>;
interrupt-parent = <700>;
interrupts = <12 2>;
reg = <1>;
device_type = "ethernet-phy";
interface = <6>;
};
};
qeic@80 {
linux,phandle = <80>;
interrupt-controller;
device_type = "qeic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <80 80>;
built-in;
big-endian;
interrupts = <20 8 21 8>; //high:32 low:33
interrupt-parent = <700>;
};
};
};
arch/powerpc/boot/zImage.coff.lds.S
View file @ 13bbd8d9
......@@ -15,6 +15,7 @@ SECTIONS
{
*(.rodata*)
*(.data*)
*(__builtin_*)
*(.sdata*)
__got2_start = .;
*(.got2)
......
arch/powerpc/configs/mpc8360emds_defconfig 0 → 100644
View file @ 13bbd8d9
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.18
# Thu Sep 21 18:14:27 2006
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_DEFAULT_UIMAGE=y
#
# Processor support
#
# CONFIG_CLASSIC32 is not set
# CONFIG_PPC_52xx is not set
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_8xx is not set
# CONFIG_E200 is not set
CONFIG_6xx=y
CONFIG_83xx=y
CONFIG_PPC_FPU=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_SMP is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_SYSCTL=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
#
# Block layer
#
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_QUICC_ENGINE=y
CONFIG_PPC_GEN550=y
# CONFIG_WANT_EARLY_SERIAL is not set
#
# Platform support
#
# CONFIG_MPC834x_SYS is not set
# CONFIG_MPC834x_ITX is not set
CONFIG_MPC8360E_PB=y
CONFIG_PPC_MPC836x=y
# CONFIG_MPIC is not set
#
# Kernel options
#
# CONFIG_HIGHMEM is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_BOOT_LOAD=0x00800000
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#
# CONFIG_WINDFARM is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_GIANFAR is not set
CONFIG_UCC_GETH=y
# CONFIG_UGETH_NAPI is not set
# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_FILTERING is not set
# CONFIG_UGETH_TX_ON_DEMOND is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_83xx_WDT=y
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#
# CONFIG_I2C_ALGOBIT is not set
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_M41T00 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
# CONFIG_MSDOS_PARTITION is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
# CONFIG_NLS is not set
#
# QE Options
#
# CONFIG_UCC_SLOW is not set
CONFIG_UCC_FAST=y
CONFIG_UCC=y
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_SERIAL_TEXT_DEBUG is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
arch/powerpc/kernel/cputable.c
View file @ 13bbd8d9
......@@ -763,10 +763,10 @@ struct cpu_spec cpu_specs[] = {
.cpu_setup = __setup_cpu_603,
.platform = "ppc603",
},
{ /* e300 (a 603e core, plus some) on 83xx */
{ /* e300c1 (a 603e core, plus some) on 83xx */
.pvr_mask = 0x7fff0000,
.pvr_value = 0x00830000,
.cpu_name = "e300",
.cpu_name = "e300c1",
.cpu_features = CPU_FTRS_E300,
.cpu_user_features = COMMON_USER,
.icache_bsize = 32,
......@@ -774,6 +774,17 @@ struct cpu_spec cpu_specs[] = {
.cpu_setup = __setup_cpu_603,
.platform = "ppc603",
},
{ /* e300c2 (an e300c1 core, plus some, minus FPU) on 83xx */
.pvr_mask = 0x7fff0000,
.pvr_value = 0x00840000,
.cpu_name = "e300c2",
.cpu_features = CPU_FTRS_E300,
.cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_603,
.platform = "ppc603",
},
{ /* default match, we assume split I/D cache & TB (non-601)... */
.pvr_mask = 0x00000000,
.pvr_value = 0x00000000,
......
arch/powerpc/kernel/entry_64.S
View file @ 13bbd8d9
......@@ -27,10 +27,7 @@
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/cputable.h>
#ifdef CONFIG_PPC_ISERIES
#define DO_SOFT_DISABLE
#endif
#include <asm/firmware.h>
/*
* System calls.
......@@ -91,6 +88,7 @@ system_call_common:
ld r11,exception_marker@toc(r2)
std r11,-16(r9) /* "regshere" marker */
#ifdef CONFIG_PPC_ISERIES
BEGIN_FW_FTR_SECTION
/* Hack for handling interrupts when soft-enabling on iSeries */
cmpdi cr1,r0,0x5555 /* syscall 0x5555 */
andi. r10,r12,MSR_PR /* from kernel */
......@@ -98,6 +96,7 @@ system_call_common:
beq hardware_interrupt_entry
lbz r10,PACAPROCENABLED(r13)
std r10,SOFTE(r1)
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif
mfmsr r11
ori r11,r11,MSR_EE
......@@ -462,6 +461,7 @@ _GLOBAL(ret_from_except_lite)
restore:
#ifdef CONFIG_PPC_ISERIES
BEGIN_FW_FTR_SECTION
ld r5,SOFTE(r1)
cmpdi 0,r5,0
beq 4f
......@@ -480,6 +480,7 @@ restore:
b .ret_from_except_lite /* loop back and handle more */
4: stb r5,PACAPROCENABLED(r13)
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif
ld r3,_MSR(r1)
......@@ -538,18 +539,23 @@ do_work:
lwz r8,TI_PREEMPT(r9)
cmpwi cr1,r8,0
#ifdef CONFIG_PPC_ISERIES
BEGIN_FW_FTR_SECTION
ld r0,SOFTE(r1)
cmpdi r0,0
#else
andi. r0,r3,MSR_EE
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif
BEGIN_FW_FTR_SECTION
andi. r0,r3,MSR_EE
END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
crandc eq,cr1*4+eq,eq
bne restore
/* here we are preempting the current task */
1:
#ifdef CONFIG_PPC_ISERIES
BEGIN_FW_FTR_SECTION
li r0,1
stb r0,PACAPROCENABLED(r13)
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif
ori r10,r10,MSR_EE
mtmsrd r10,1 /* reenable interrupts */
......
arch/powerpc/kernel/head_64.S
View file @ 13bbd8d9
......@@ -33,6 +33,7 @@
#include <asm/hvcall.h>
#include <asm/iseries/lpar_map.h>
#include <asm/thread_info.h>
#include <asm/firmware.h>
#ifdef CONFIG_PPC_ISERIES
#define DO_SOFT_DISABLE
......@@ -365,19 +366,28 @@ label##_iSeries: \
#ifdef DO_SOFT_DISABLE
#define DISABLE_INTS \
BEGIN_FW_FTR_SECTION; \
lbz r10,PACAPROCENABLED(r13); \
li r11,0; \
std r10,SOFTE(r1); \
mfmsr r10; \
stb r11,PACAPROCENABLED(r13); \
ori r10,r10,MSR_EE; \
mtmsrd r10,1
mtmsrd r10,1; \
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#define ENABLE_INTS \
BEGIN_FW_FTR_SECTION; \
lbz r10,PACAPROCENABLED(r13); \
mfmsr r11; \
std r10,SOFTE(r1); \
ori r11,r11,MSR_EE; \
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES); \
BEGIN_FW_FTR_SECTION; \
ld r12,_MSR(r1); \
mfmsr r11; \
rlwimi r11,r12,0,MSR_EE; \
END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES); \
mtmsrd r11,1
#else /* hard enable/disable interrupts */
......@@ -1071,8 +1081,10 @@ _GLOBAL(slb_miss_realmode)
ld r3,PACA_EXSLB+EX_R3(r13)
lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
#ifdef CONFIG_PPC_ISERIES
BEGIN_FW_FTR_SECTION
ld r11,PACALPPACAPTR(r13)
ld r11,LPPACASRR0(r11) /* get SRR0 value */
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif /* CONFIG_PPC_ISERIES */
mtlr r10
......@@ -1087,8 +1099,10 @@ _GLOBAL(slb_miss_realmode)
.machine pop
#ifdef CONFIG_PPC_ISERIES
BEGIN_FW_FTR_SECTION
mtspr SPRN_SRR0,r11
mtspr SPRN_SRR1,r12
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif /* CONFIG_PPC_ISERIES */
ld r9,PACA_EXSLB+EX_R9(r13)
ld r10,PACA_EXSLB+EX_R10(r13)
......@@ -1301,6 +1315,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
cmpdi r3,0 /* see if hash_page succeeded */
#ifdef DO_SOFT_DISABLE
BEGIN_FW_FTR_SECTION
/*
* If we had interrupts soft-enabled at the point where the
* DSI/ISI occurred, and an interrupt came in during hash_page,
......@@ -1321,12 +1336,14 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
ld r3,SOFTE(r1)
bl .local_irq_restore
b 11f
#else
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif
BEGIN_FW_FTR_SECTION
beq fast_exception_return /* Return from exception on success */
ble- 12f /* Failure return from hash_page */
/* fall through */
#endif
END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
/* Here we have a page fault that hash_page can't handle. */
_GLOBAL(handle_page_fault)
......@@ -1861,7 +1878,9 @@ _GLOBAL(__secondary_start)
LOAD_REG_ADDR(r3, .start_secondary_prolog)
LOAD_REG_IMMEDIATE(r4, MSR_KERNEL)
#ifdef DO_SOFT_DISABLE
BEGIN_FW_FTR_SECTION
ori r4,r4,MSR_EE
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif
mtspr SPRN_SRR0,r3
mtspr SPRN_SRR1,r4
......@@ -1986,6 +2005,7 @@ _STATIC(start_here_common)
*/
li r3,0
bl .do_cpu_ftr_fixups
bl .do_fw_ftr_fixups
/* ptr to current */
LOAD_REG_IMMEDIATE(r4, init_task)
......@@ -2000,11 +2020,13 @@ _STATIC(start_here_common)
/* Load up the kernel context */
5:
#ifdef DO_SOFT_DISABLE
BEGIN_FW_FTR_SECTION
li r5,0
stb r5,PACAPROCENABLED(r13) /* Soft Disabled */
mfmsr r5
ori r5,r5,MSR_EE /* Hard Enabled */
mtmsrd r5
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif
bl .start_kernel
......
arch/powerpc/kernel/misc_64.S
View file @ 13bbd8d9
......@@ -325,6 +325,52 @@ _GLOBAL(do_cpu_ftr_fixups)
isync
b 1b
/*
* do_fw_ftr_fixups - goes through the list of firmware feature fixups
* and writes nop's over sections of code that don't apply for this firmware.
* r3 = data offset (not changed)
*/
_GLOBAL(do_fw_ftr_fixups)
/* Get firmware features */
LOAD_REG_IMMEDIATE(r6,powerpc_firmware_features)
sub r6,r6,r3
ld r4,0(r6)
/* Get the fixup table */
LOAD_REG_IMMEDIATE(r6,__start___fw_ftr_fixup)
sub r6,r6,r3
LOAD_REG_IMMEDIATE(r7,__stop___fw_ftr_fixup)
sub r7,r7,r3
/* Do the fixup */
1: cmpld r6,r7
bgelr
addi r6,r6,32
ld r8,-32(r6) /* mask */
and r8,r8,r4
ld r9,-24(r6) /* value */
cmpld r8,r9
beq 1b
ld r8,-16(r6) /* section begin */
ld r9,-8(r6) /* section end */
subf. r9,r8,r9
beq 1b
/* write nops over the section of code */
/* todo: if large section, add a branch at the start of it */
srwi r9,r9,2
mtctr r9
sub r8,r8,r3
lis r0,0x60000000@h /* nop */
3: stw r0,0(r8)
BEGIN_FTR_SECTION
dcbst 0,r8 /* suboptimal, but simpler */
sync
icbi 0,r8
END_FTR_SECTION_IFSET(CPU_FTR_SPLIT_ID_CACHE)
addi r8,r8,4
bdnz 3b
sync /* additional sync needed on g4 */
isync
b 1b
#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE)
/*
* Do an IO access in real mode
......
arch/powerpc/kernel/pci_64.c
View file @ 13bbd8d9
......@@ -30,6 +30,7 @@
#include <asm/byteorder.h>
#include <asm/machdep.h>
#include <asm/ppc-pci.h>
#include <asm/firmware.h>
#ifdef DEBUG
#include <asm/udbg.h>
......@@ -209,7 +210,6 @@ void pcibios_free_controller(struct pci_controller *phb)
kfree(phb);
}
#ifndef CONFIG_PPC_ISERIES
void __devinit pcibios_claim_one_bus(struct pci_bus *b)
{
struct pci_dev *dev;
......@@ -238,10 +238,12 @@ static void __init pcibios_claim_of_setup(void)
{
struct pci_bus *b;
if (firmware_has_feature(FW_FEATURE_ISERIES))
return;
list_for_each_entry(b, &pci_root_buses, node)
pcibios_claim_one_bus(b);
}
#endif
#ifdef CONFIG_PPC_MULTIPLATFORM
static u32 get_int_prop(struct device_node *np, const char *name, u32 def)
......@@ -554,9 +556,8 @@ static int __init pcibios_init(void)
*/
ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot;
#ifdef CONFIG_PPC_ISERIES
iSeries_pcibios_init();
#endif
if (firmware_has_feature(FW_FEATURE_ISERIES))
iSeries_pcibios_init();
printk(KERN_DEBUG "PCI: Probing PCI hardware\n");
......@@ -566,15 +567,15 @@ static int __init pcibios_init(void)
pci_bus_add_devices(hose->bus);
}
#ifndef CONFIG_PPC_ISERIES
if (pci_probe_only)
pcibios_claim_of_setup();
else
/* FIXME: `else' will be removed when
pci_assign_unassigned_resources() is able to work
correctly with [partially] allocated PCI tree. */
pci_assign_unassigned_resources();
#endif /* !CONFIG_PPC_ISERIES */
if (!firmware_has_feature(FW_FEATURE_ISERIES)) {
if (pci_probe_only)
pcibios_claim_of_setup();
else
/* FIXME: `else' will be removed when
pci_assign_unassigned_resources() is able to work
correctly with [partially] allocated PCI tree. */
pci_assign_unassigned_resources();
}
/* Call machine dependent final fixup */
if (ppc_md.pcibios_fixup)
......@@ -586,8 +587,9 @@ static int __init pcibios_init(void)
printk(KERN_DEBUG "ISA bridge at %s\n", pci_name(ppc64_isabridge_dev));
#ifdef CONFIG_PPC_MULTIPLATFORM
/* map in PCI I/O space */
phbs_remap_io();
if (!firmware_has_feature(FW_FEATURE_ISERIES))
/* map in PCI I/O space */
phbs_remap_io();
#endif
printk(KERN_DEBUG "PCI: Probing PCI hardware done\n");
......@@ -637,13 +639,13 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
*/
int pci_domain_nr(struct pci_bus *bus)
{
#ifdef CONFIG_PPC_ISERIES
return 0;
#else
struct pci_controller *hose = pci_bus_to_host(bus);
if (firmware_has_feature(FW_FEATURE_ISERIES))
return 0;
else {
struct pci_controller *hose = pci_bus_to_host(bus);
return hose->global_number;
#endif
return hose->global_number;
}
}
EXPORT_SYMBOL(pci_domain_nr);
......@@ -651,12 +653,12 @@ EXPORT_SYMBOL(pci_domain_nr);
/* Decide whether to display the domain number in /proc */
int pci_proc_domain(struct pci_bus *bus)
{
#ifdef CONFIG_PPC_ISERIES
return 0;
#else
struct pci_controller *hose = pci_bus_to_host(bus);
return hose->buid;
#endif
if (firmware_has_feature(FW_FEATURE_ISERIES))
return 0;
else {
struct pci_controller *hose = pci_bus_to_host(bus);
return hose->buid;
}
}
/*
......
arch/powerpc/kernel/setup-common.c
View file @ 13bbd8d9
......@@ -442,31 +442,6 @@ void __init smp_setup_cpu_maps(void)
}
#endif /* CONFIG_SMP */
int __initdata do_early_xmon;
#ifdef CONFIG_XMON
extern int xmon_no_auto_backtrace;
static int __init early_xmon(char *p)
{
/* ensure xmon is enabled */
if (p) {
if (strncmp(p, "on", 2) == 0)
xmon_init(1);
if (strncmp(p, "off", 3) == 0)
xmon_init(0);
if (strncmp(p, "nobt", 4) == 0)
xmon_no_auto_backtrace = 1;
if (strncmp(p, "early", 5) != 0)
return 0;
}
xmon_init(1);
do_early_xmon = 1;
return 0;
}
early_param("xmon", early_xmon);
#endif
static __init int add_pcspkr(void)
{
struct device_node *np;
......
arch/powerpc/kernel/setup_32.c
View file @ 13bbd8d9
......@@ -238,12 +238,11 @@ void __init setup_arch(char **cmdline_p)
smp_setup_cpu_maps();
#ifdef CONFIG_XMON_DEFAULT
xmon_init(1);
#endif
/* Register early console */
register_early_udbg_console();
xmon_setup();
#if defined(CONFIG_KGDB)
if (ppc_md.kgdb_map_scc)
ppc_md.kgdb_map_scc();
......@@ -280,9 +279,6 @@ void __init setup_arch(char **cmdline_p)
init_mm.end_data = (unsigned long) _edata;
init_mm.brk = klimit;
if (do_early_xmon)
debugger(NULL);
/* set up the bootmem stuff with available memory */
do_init_bootmem();
if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab);
......
arch/powerpc/kernel/setup_64.c
View file @ 13bbd8d9
......@@ -390,19 +390,15 @@ void __init setup_system(void)
*/
find_legacy_serial_ports();
/*
* Initialize xmon
*/
#ifdef CONFIG_XMON_DEFAULT
xmon_init(1);
#endif
/*
* Register early console
*/
register_early_udbg_console();
if (do_early_xmon)
debugger(NULL);
/*
* Initialize xmon
*/
xmon_setup();
check_smt_enabled();
smp_setup_cpu_maps();
......
arch/powerpc/kernel/vmlinux.lds.S
View file @ 13bbd8d9
......@@ -132,6 +132,14 @@ SECTIONS
*(__ftr_fixup)
__stop___ftr_fixup = .;
}
#ifdef CONFIG_PPC64
. = ALIGN(8);
__fw_ftr_fixup : {
__start___fw_ftr_fixup = .;
*(__fw_ftr_fixup)
__stop___fw_ftr_fixup = .;
}
#endif
. = ALIGN(PAGE_SIZE);
.init.ramfs : {
......
arch/powerpc/mm/pgtable_64.c
View file @ 13bbd8d9
......@@ -63,32 +63,13 @@
#include <asm/iommu.h>
#include <asm/abs_addr.h>
#include <asm/vdso.h>
#include <asm/firmware.h>
#include "mmu_decl.h"
unsigned long ioremap_bot = IMALLOC_BASE;
static unsigned long phbs_io_bot = PHBS_IO_BASE;
#ifdef CONFIG_PPC_ISERIES
void __iomem *ioremap(unsigned long addr, unsigned long size)
{
return (void __iomem *)addr;
}
extern void __iomem *__ioremap(unsigned long addr, unsigned long size,
unsigned long flags)
{
return (void __iomem *)addr;
}
void iounmap(volatile void __iomem *addr)
{
return;
}
#else
/*
* map_io_page currently only called by __ioremap
* map_io_page adds an entry to the ioremap page table
......@@ -161,6 +142,9 @@ void __iomem * __ioremap(unsigned long addr, unsigned long size,
unsigned long pa, ea;
void __iomem *ret;
if (firmware_has_feature(FW_FEATURE_ISERIES))
return (void __iomem *)addr;
/*
* Choose an address to map it to.
* Once the imalloc system is running, we use it.
......@@ -255,6 +239,9 @@ void iounmap(volatile void __iomem *token)
{
void *addr;
if (firmware_has_feature(FW_FEATURE_ISERIES))
return;
if (!mem_init_done)
return;
......@@ -315,8 +302,6 @@ int iounmap_explicit(volatile void __iomem *start, unsigned long size)
return 0;
}
#endif
EXPORT_SYMBOL(ioremap);
EXPORT_SYMBOL(__ioremap);
EXPORT_SYMBOL(iounmap);
......
arch/powerpc/mm/slb_low.S
View file @ 13bbd8d9
......@@ -21,6 +21,7 @@
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/pgtable.h>
#include <asm/firmware.h>
/* void slb_allocate_realmode(unsigned long ea);
*
......@@ -183,6 +184,7 @@ slb_finish_load:
* dont have any LRU information to help us choose a slot.
*/
#ifdef CONFIG_PPC_ISERIES
BEGIN_FW_FTR_SECTION
/*
* On iSeries, the "bolted" stack segment can be cast out on
* shared processor switch so we need to check for a miss on
......@@ -194,6 +196,7 @@ slb_finish_load:
li r10,SLB_NUM_BOLTED-1 /* Stack goes in last bolted slot */
cmpld r9,r3
beq 3f
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif /* CONFIG_PPC_ISERIES */
ld r10,PACASTABRR(r13)
......
arch/powerpc/platforms/82xx/Kconfig 0 → 100644
View file @ 13bbd8d9
menu "Platform support"
depends on PPC_82xx
choice
prompt "Machine Type"
default MPC82xx_ADS
config MPC82xx_ADS
bool "Freescale MPC82xx ADS"
select DEFAULT_UIMAGE
select PQ2ADS
select 8272
select 8260
select CPM2
select FSL_SOC
help
This option enables support for the MPC8272 ADS board
endchoice
endmenu
arch/powerpc/platforms/82xx/Makefile 0 → 100644
View file @ 13bbd8d9
#
# Makefile for the PowerPC 82xx linux kernel.
#
obj-$(CONFIG_PPC_82xx) += mpc82xx.o
obj-$(CONFIG_MPC82xx_ADS) += mpc82xx_ads.o
arch/powerpc/platforms/82xx/m82xx_pci.h 0 → 100644
View file @ 13bbd8d9
#ifndef _PPC_KERNEL_M82XX_PCI_H
#define _PPC_KERNEL_M82XX_PCI_H
/*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <asm/m8260_pci.h>
#define SIU_INT_IRQ1 ((uint)0x13 + CPM_IRQ_OFFSET)
#ifndef _IO_BASE
#define _IO_BASE isa_io_base
#endif
#endif /* _PPC_KERNEL_M8260_PCI_H */
arch/powerpc/platforms/82xx/mpc82xx.c 0 → 100644
View file @ 13bbd8d9
/*
* MPC82xx setup and early boot code plus other random bits.
*
* Author: Vitaly Bordug <vbordug@ru.mvista.com>
*
* Copyright (c) 2006 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/config.h>
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/reboot.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/kdev_t.h>
#include <linux/major.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/initrd.h>
#include <linux/module.h>
#include <linux/fsl_devices.h>
#include <linux/fs_uart_pd.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/atomic.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/bootinfo.h>
#include <asm/pci-bridge.h>
#include <asm/mpc8260.h>
#include <asm/irq.h>
#include <mm/mmu_decl.h>
#include <asm/prom.h>
#include <asm/cpm2.h>
#include <asm/udbg.h>
#include <asm/i8259.h>
#include <linux/fs_enet_pd.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/cpm2_pic.h>
#include "pq2ads_pd.h"
static int __init get_freq(char *name, unsigned long *val)
{
struct device_node *cpu;
unsigned int *fp;
int found = 0;
/* The cpu node should have timebase and clock frequency properties */
cpu = of_find_node_by_type(NULL, "cpu");
if (cpu) {
fp = (unsigned int *)get_property(cpu, name, NULL);
if (fp) {
found = 1;
*val = *fp++;
}
of_node_put(cpu);
}
return found;
}
void __init m82xx_calibrate_decr(void)
{
ppc_tb_freq = 125000000;
if (!get_freq("bus-frequency", &ppc_tb_freq)) {
printk(KERN_ERR "WARNING: Estimating decrementer frequency "
"(not found)\n");
}
ppc_tb_freq /= 4;
ppc_proc_freq = 1000000000;
if (!get_freq("clock-frequency", &ppc_proc_freq))
printk(KERN_ERR "WARNING: Estimating processor frequency"
"(not found)\n");
}
void mpc82xx_ads_show_cpuinfo(struct seq_file *m)
{
uint pvid, svid, phid1;
uint memsize = total_memory;
pvid = mfspr(SPRN_PVR);
svid = mfspr(SPRN_SVR);
seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
seq_printf(m, "Machine\t\t: %s\n", CPUINFO_MACHINE);
seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
seq_printf(m, "SVR\t\t: 0x%x\n", svid);
/* Display cpu Pll setting */
phid1 = mfspr(SPRN_HID1);
seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
/* Display the amount of memory */
seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
}
arch/powerpc/platforms/82xx/mpc82xx_ads.c 0 → 100644
View file @ 13bbd8d9
/*
* MPC82xx_ads setup and early boot code plus other random bits.
*
* Author: Vitaly Bordug <vbordug@ru.mvista.com>
* m82xx_restart fix by Wade Farnsworth <wfarnsworth@mvista.com>
*
* Copyright (c) 2006 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/config.h>
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/reboot.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/kdev_t.h>
#include <linux/major.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/initrd.h>
#include <linux/module.h>
#include <linux/fsl_devices.h>
#include <linux/fs_uart_pd.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/atomic.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/bootinfo.h>
#include <asm/pci-bridge.h>
#include <asm/mpc8260.h>
#include <asm/irq.h>
#include <mm/mmu_decl.h>
#include <asm/prom.h>
#include <asm/cpm2.h>
#include <asm/udbg.h>
#include <asm/i8259.h>
#include <linux/fs_enet_pd.h>
#include <sysdev/fsl_soc.h>
#include <../sysdev/cpm2_pic.h>
#include "pq2ads_pd.h"
#ifdef CONFIG_PCI
static uint pci_clk_frq;
static struct {
unsigned long *pci_int_stat_reg;
unsigned long *pci_int_mask_reg;
} pci_regs;
static unsigned long pci_int_base;
static struct irq_host *pci_pic_host;
static struct device_node *pci_pic_node;
#endif
static void __init mpc82xx_ads_pic_init(void)
{
struct device_node *np = of_find_compatible_node(NULL, "cpm-pic", "CPM2");
struct resource r;
cpm2_map_t *cpm_reg;
if (np == NULL) {
printk(KERN_ERR "PIC init: can not find cpm-pic node\n");
return;
}
if (of_address_to_resource(np, 0, &r)) {
printk(KERN_ERR "PIC init: invalid resource\n");
of_node_put(np);
return;
}
cpm2_pic_init(np);
of_node_put(np);
/* Initialize the default interrupt mapping priorities,
* in case the boot rom changed something on us.
*/
cpm_reg = (cpm2_map_t *) ioremap(get_immrbase(), sizeof(cpm2_map_t));
cpm_reg->im_intctl.ic_siprr = 0x05309770;
iounmap(cpm_reg);
#ifdef CONFIG_PCI
/* Initialize stuff for the 82xx CPLD IC and install demux */
m82xx_pci_init_irq();
#endif
}
static void init_fcc1_ioports(struct fs_platform_info *fpi)
{
struct io_port *io;
u32 tempval;
cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t));
struct device_node *np;
struct resource r;
u32 *bcsr;
np = of_find_node_by_type(NULL, "memory");
if (!np) {
printk(KERN_INFO "No memory node in device tree\n");
return;
}
if (of_address_to_resource(np, 1, &r)) {
printk(KERN_INFO "No memory reg property [1] in devicetree\n");
return;
}
of_node_put(np);
bcsr = ioremap(r.start + 4, sizeof(u32));
io = &immap->im_ioport;
/* Enable the PHY */
clrbits32(bcsr, BCSR1_FETHIEN);
setbits32(bcsr, BCSR1_FETH_RST);
/* FCC1 pins are on port A/C. */
/* Configure port A and C pins for FCC1 Ethernet. */
tempval = in_be32(&io->iop_pdira);
tempval &= ~PA1_DIRA0;
tempval |= PA1_DIRA1;
out_be32(&io->iop_pdira, tempval);
tempval = in_be32(&io->iop_psora);
tempval &= ~PA1_PSORA0;
tempval |= PA1_PSORA1;
out_be32(&io->iop_psora, tempval);
setbits32(&io->iop_ppara, PA1_DIRA0 | PA1_DIRA1);
/* Alter clocks */
tempval = PC_CLK(fpi->clk_tx - 8) | PC_CLK(fpi->clk_rx - 8);
clrbits32(&io->iop_psorc, tempval);
clrbits32(&io->iop_pdirc, tempval);
setbits32(&io->iop_pparc, tempval);
cpm2_clk_setup(CPM_CLK_FCC1, fpi->clk_rx, CPM_CLK_RX);
cpm2_clk_setup(CPM_CLK_FCC1, fpi->clk_tx, CPM_CLK_TX);
iounmap(bcsr);
iounmap(immap);
}
static void init_fcc2_ioports(struct fs_platform_info *fpi)
{
cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t));
struct device_node *np;
struct resource r;
u32 *bcsr;
struct io_port *io;
u32 tempval;
np = of_find_node_by_type(NULL, "memory");
if (!np) {
printk(KERN_INFO "No memory node in device tree\n");
return;
}
if (of_address_to_resource(np, 1, &r)) {
printk(KERN_INFO "No memory reg property [1] in devicetree\n");
return;
}
of_node_put(np);
io = &immap->im_ioport;
bcsr = ioremap(r.start + 12, sizeof(u32));
/* Enable the PHY */
clrbits32(bcsr, BCSR3_FETHIEN2);
setbits32(bcsr, BCSR3_FETH2_RST);
/* FCC2 are port B/C. */
/* Configure port A and C pins for FCC2 Ethernet. */
tempval = in_be32(&io->iop_pdirb);
tempval &= ~PB2_DIRB0;
tempval |= PB2_DIRB1;
out_be32(&io->iop_pdirb, tempval);
tempval = in_be32(&io->iop_psorb);
tempval &= ~PB2_PSORB0;
tempval |= PB2_PSORB1;
out_be32(&io->iop_psorb, tempval);
setbits32(&io->iop_pparb, PB2_DIRB0 | PB2_DIRB1);
tempval = PC_CLK(fpi->clk_tx - 8) | PC_CLK(fpi->clk_rx - 8);
/* Alter clocks */
clrbits32(&io->iop_psorc, tempval);
clrbits32(&io->iop_pdirc, tempval);
setbits32(&io->iop_pparc, tempval);
cpm2_clk_setup(CPM_CLK_FCC2, fpi->clk_rx, CPM_CLK_RX);
cpm2_clk_setup(CPM_CLK_FCC2, fpi->clk_tx, CPM_CLK_TX);
iounmap(bcsr);
iounmap(immap);
}
void init_fcc_ioports(struct fs_platform_info *fpi)
{
int fcc_no = fs_get_fcc_index(fpi->fs_no);
switch (fcc_no) {
case 0:
init_fcc1_ioports(fpi);
break;
case 1:
init_fcc2_ioports(fpi);
break;
default:
printk(KERN_ERR "init_fcc_ioports: invalid FCC number\n");
return;
}
}
static void init_scc1_uart_ioports(struct fs_uart_platform_info *data)
{
cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t));
/* SCC1 is only on port D */
setbits32(&immap->im_ioport.iop_ppard, 0x00000003);
clrbits32(&immap->im_ioport.iop_psord, 0x00000001);
setbits32(&immap->im_ioport.iop_psord, 0x00000002);
clrbits32(&immap->im_ioport.iop_pdird, 0x00000001);
setbits32(&immap->im_ioport.iop_pdird, 0x00000002);
clrbits32(&immap->im_cpmux.cmx_scr, (0x00000007 << (4 - data->clk_tx)));
clrbits32(&immap->im_cpmux.cmx_scr, (0x00000038 << (4 - data->clk_rx)));
setbits32(&immap->im_cpmux.cmx_scr,
((data->clk_tx - 1) << (4 - data->clk_tx)));
setbits32(&immap->im_cpmux.cmx_scr,
((data->clk_rx - 1) << (4 - data->clk_rx)));
iounmap(immap);
}
static void init_scc4_uart_ioports(struct fs_uart_platform_info *data)
{
cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t));
setbits32(&immap->im_ioport.iop_ppard, 0x00000600);
clrbits32(&immap->im_ioport.iop_psord, 0x00000600);
clrbits32(&immap->im_ioport.iop_pdird, 0x00000200);
setbits32(&immap->im_ioport.iop_pdird, 0x00000400);
clrbits32(&immap->im_cpmux.cmx_scr, (0x00000007 << (4 - data->clk_tx)));
clrbits32(&immap->im_cpmux.cmx_scr, (0x00000038 << (4 - data->clk_rx)));
setbits32(&immap->im_cpmux.cmx_scr,
((data->clk_tx - 1) << (4 - data->clk_tx)));
setbits32(&immap->im_cpmux.cmx_scr,
((data->clk_rx - 1) << (4 - data->clk_rx)));
iounmap(immap);
}
void init_scc_ioports(struct fs_uart_platform_info *data)
{
int scc_no = fs_get_scc_index(data->fs_no);
switch (scc_no) {
case 0:
init_scc1_uart_ioports(data);
data->brg = data->clk_rx;
break;
case 3:
init_scc4_uart_ioports(data);
data->brg = data->clk_rx;
break;
default:
printk(KERN_ERR "init_scc_ioports: invalid SCC number\n");
return;
}
}
void __init m82xx_board_setup(void)
{
cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t));
struct device_node *np;
struct resource r;
u32 *bcsr;
np = of_find_node_by_type(NULL, "memory");
if (!np) {
printk(KERN_INFO "No memory node in device tree\n");
return;
}
if (of_address_to_resource(np, 1, &r)) {
printk(KERN_INFO "No memory reg property [1] in devicetree\n");
return;
}
of_node_put(np);
bcsr = ioremap(r.start + 4, sizeof(u32));
/* Enable the 2nd UART port */
clrbits32(bcsr, BCSR1_RS232_EN2);
#ifdef CONFIG_SERIAL_CPM_SCC1
clrbits32((u32 *) & immap->im_scc[0].scc_sccm,
UART_SCCM_TX | UART_SCCM_RX);
clrbits32((u32 *) & immap->im_scc[0].scc_gsmrl,
SCC_GSMRL_ENR | SCC_GSMRL_ENT);
#endif
#ifdef CONFIG_SERIAL_CPM_SCC2
clrbits32((u32 *) & immap->im_scc[1].scc_sccm,
UART_SCCM_TX | UART_SCCM_RX);
clrbits32((u32 *) & immap->im_scc[1].scc_gsmrl,
SCC_GSMRL_ENR | SCC_GSMRL_ENT);
#endif
#ifdef CONFIG_SERIAL_CPM_SCC3
clrbits32((u32 *) & immap->im_scc[2].scc_sccm,
UART_SCCM_TX | UART_SCCM_RX);
clrbits32((u32 *) & immap->im_scc[2].scc_gsmrl,
SCC_GSMRL_ENR | SCC_GSMRL_ENT);
#endif
#ifdef CONFIG_SERIAL_CPM_SCC4
clrbits32((u32 *) & immap->im_scc[3].scc_sccm,
UART_SCCM_TX | UART_SCCM_RX);
clrbits32((u32 *) & immap->im_scc[3].scc_gsmrl,
SCC_GSMRL_ENR | SCC_GSMRL_ENT);
#endif
iounmap(bcsr);
iounmap(immap);
}
#ifdef CONFIG_PCI
static void m82xx_pci_mask_irq(unsigned int irq)
{
int bit = irq - pci_int_base;
*pci_regs.pci_int_mask_reg |= (1 << (31 - bit));
return;
}
static void m82xx_pci_unmask_irq(unsigned int irq)
{
int bit = irq - pci_int_base;
*pci_regs.pci_int_mask_reg &= ~(1 << (31 - bit));
return;
}
static void m82xx_pci_mask_and_ack(unsigned int irq)
{
int bit = irq - pci_int_base;
*pci_regs.pci_int_mask_reg |= (1 << (31 - bit));
return;
}
static void m82xx_pci_end_irq(unsigned int irq)
{
int bit = irq - pci_int_base;
*pci_regs.pci_int_mask_reg &= ~(1 << (31 - bit));
return;
}
struct hw_interrupt_type m82xx_pci_ic = {
.typename = "MPC82xx ADS PCI",
.name = "MPC82xx ADS PCI",
.enable = m82xx_pci_unmask_irq,
.disable = m82xx_pci_mask_irq,
.ack = m82xx_pci_mask_and_ack,
.end = m82xx_pci_end_irq,
.mask = m82xx_pci_mask_irq,
.mask_ack = m82xx_pci_mask_and_ack,
.unmask = m82xx_pci_unmask_irq,
.eoi = m82xx_pci_end_irq,
};
static void
m82xx_pci_irq_demux(unsigned int irq, struct irq_desc *desc,
struct pt_regs *regs)
{
unsigned long stat, mask, pend;
int bit;
for (;;) {
stat = *pci_regs.pci_int_stat_reg;
mask = *pci_regs.pci_int_mask_reg;
pend = stat & ~mask & 0xf0000000;
if (!pend)
break;
for (bit = 0; pend != 0; ++bit, pend <<= 1) {
if (pend & 0x80000000)
__do_IRQ(pci_int_base + bit, regs);
}
}
}
static int pci_pic_host_match(struct irq_host *h, struct device_node *node)
{
return node == pci_pic_node;
}
static int pci_pic_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
get_irq_desc(virq)->status |= IRQ_LEVEL;
set_irq_chip(virq, &m82xx_pci_ic);
return 0;
}
static void pci_host_unmap(struct irq_host *h, unsigned int virq)
{
/* remove chip and handler */
set_irq_chip(virq, NULL);
}
static struct irq_host_ops pci_pic_host_ops = {
.match = pci_pic_host_match,
.map = pci_pic_host_map,
.unmap = pci_host_unmap,
};
void m82xx_pci_init_irq(void)
{
int irq;
cpm2_map_t *immap;
struct device_node *np;
struct resource r;
const u32 *regs;
unsigned int size;
const u32 *irq_map;
int i;
unsigned int irq_max, irq_min;
if ((np = of_find_node_by_type(NULL, "soc")) == NULL) {
printk(KERN_INFO "No SOC node in device tree\n");
return;
}
memset(&r, 0, sizeof(r));
if (of_address_to_resource(np, 0, &r)) {
printk(KERN_INFO "No SOC reg property in device tree\n");
return;
}
immap = ioremap(r.start, sizeof(*immap));
of_node_put(np);
/* install the demultiplexer for the PCI cascade interrupt */
np = of_find_node_by_type(NULL, "pci");
if (!np) {
printk(KERN_INFO "No pci node on device tree\n");
iounmap(immap);
return;
}
irq_map = get_property(np, "interrupt-map", &size);
if ((!irq_map) || (size <= 7)) {
printk(KERN_INFO "No interrupt-map property of pci node\n");
iounmap(immap);
return;
}
size /= sizeof(irq_map[0]);
for (i = 0, irq_max = 0, irq_min = 512; i < size; i += 7, irq_map += 7) {
if (irq_map[5] < irq_min)
irq_min = irq_map[5];
if (irq_map[5] > irq_max)
irq_max = irq_map[5];
}
pci_int_base = irq_min;
irq = irq_of_parse_and_map(np, 0);
set_irq_chained_handler(irq, m82xx_pci_irq_demux);
of_node_put(np);
np = of_find_node_by_type(NULL, "pci-pic");
if (!np) {
printk(KERN_INFO "No pci pic node on device tree\n");
iounmap(immap);
return;
}
pci_pic_node = of_node_get(np);
/* PCI interrupt controller registers: status and mask */
regs = get_property(np, "reg", &size);
if ((!regs) || (size <= 2)) {
printk(KERN_INFO "No reg property in pci pic node\n");
iounmap(immap);
return;
}
pci_regs.pci_int_stat_reg =
ioremap(regs[0], sizeof(*pci_regs.pci_int_stat_reg));
pci_regs.pci_int_mask_reg =
ioremap(regs[1], sizeof(*pci_regs.pci_int_mask_reg));
of_node_put(np);
/* configure chip select for PCI interrupt controller */
immap->im_memctl.memc_br3 = regs[0] | 0x00001801;
immap->im_memctl.memc_or3 = 0xffff8010;
/* make PCI IRQ level sensitive */
immap->im_intctl.ic_siexr &= ~(1 << (14 - (irq - SIU_INT_IRQ1)));
/* mask all PCI interrupts */
*pci_regs.pci_int_mask_reg |= 0xfff00000;
iounmap(immap);
pci_pic_host =
irq_alloc_host(IRQ_HOST_MAP_LINEAR, irq_max - irq_min + 1,
&pci_pic_host_ops, irq_max + 1);
return;
}
static int m82xx_pci_exclude_device(u_char bus, u_char devfn)
{
if (bus == 0 && PCI_SLOT(devfn) == 0)
return PCIBIOS_DEVICE_NOT_FOUND;
else
return PCIBIOS_SUCCESSFUL;
}
static void
__init mpc82xx_pcibios_fixup(void)
{
struct pci_dev *dev = NULL;
for_each_pci_dev(dev) {
pci_read_irq_line(dev);
}
}
void __init add_bridge(struct device_node *np)
{
int len;
struct pci_controller *hose;
struct resource r;
const int *bus_range;
const void *ptr;
memset(&r, 0, sizeof(r));
if (of_address_to_resource(np, 0, &r)) {
printk(KERN_INFO "No PCI reg property in device tree\n");
return;
}
if (!(ptr = get_property(np, "clock-frequency", NULL))) {
printk(KERN_INFO "No clock-frequency property in PCI node");
return;
}
pci_clk_frq = *(uint *) ptr;
of_node_put(np);
bus_range = get_property(np, "bus-range", &len);
if (bus_range == NULL || len < 2 * sizeof(int)) {
printk(KERN_WARNING "Can't get bus-range for %s, assume"
" bus 0\n", np->full_name);
}
pci_assign_all_buses = 1;
hose = pcibios_alloc_controller();
if (!hose)
return;
hose->arch_data = np;
hose->set_cfg_type = 1;
hose->first_busno = bus_range ? bus_range[0] : 0;
hose->last_busno = bus_range ? bus_range[1] : 0xff;
hose->bus_offset = 0;
hose->set_cfg_type = 1;
setup_indirect_pci(hose,
r.start + offsetof(pci_cpm2_t, pci_cfg_addr),
r.start + offsetof(pci_cpm2_t, pci_cfg_data));
pci_process_bridge_OF_ranges(hose, np, 1);
}
#endif
/*
* Setup the architecture
*/
static void __init mpc82xx_ads_setup_arch(void)
{
#ifdef CONFIG_PCI
struct device_node *np;
#endif
if (ppc_md.progress)
ppc_md.progress("mpc82xx_ads_setup_arch()", 0);
cpm2_reset();
/* Map I/O region to a 256MB BAT */
m82xx_board_setup();
#ifdef CONFIG_PCI
ppc_md.pci_exclude_device = m82xx_pci_exclude_device;
for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
add_bridge(np);
of_node_put(np);
ppc_md.pci_map_irq = NULL;
ppc_md.pcibios_fixup = mpc82xx_pcibios_fixup;
ppc_md.pcibios_fixup_bus = NULL;
#endif
#ifdef CONFIG_ROOT_NFS
ROOT_DEV = Root_NFS;
#else
ROOT_DEV = Root_HDA1;
#endif
if (ppc_md.progress)
ppc_md.progress("mpc82xx_ads_setup_arch(), finish", 0);
}
/*
* Called very early, device-tree isn't unflattened
*/
static int __init mpc82xx_ads_probe(void)
{
/* We always match for now, eventually we should look at
* the flat dev tree to ensure this is the board we are
* supposed to run on
*/
return 1;
}
#define RMR_CSRE 0x00000001
static void m82xx_restart(char *cmd)
{
__volatile__ unsigned char dummy;
local_irq_disable();
((cpm2_map_t *) cpm2_immr)->im_clkrst.car_rmr |= RMR_CSRE;
/* Clear the ME,EE,IR & DR bits in MSR to cause checkstop */
mtmsr(mfmsr() & ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR));
dummy = ((cpm2_map_t *) cpm2_immr)->im_clkrst.res[0];
printk("Restart failed\n");
while (1) ;
}
static void m82xx_halt(void)
{
local_irq_disable();
while (1) ;
}
define_machine(mpc82xx_ads)
{
.name = "MPC82xx ADS",
.probe = mpc82xx_ads_probe,
.setup_arch = mpc82xx_ads_setup_arch,
.init_IRQ = mpc82xx_ads_pic_init,
.show_cpuinfo = mpc82xx_ads_show_cpuinfo,
.get_irq = cpm2_get_irq,
.calibrate_decr = m82xx_calibrate_decr,
.restart = m82xx_restart,.halt = m82xx_halt,
};
arch/powerpc/platforms/82xx/pq2ads.h 0 → 100644
View file @ 13bbd8d9
/*
* PQ2/mpc8260 board-specific stuff
*
* A collection of structures, addresses, and values associated with
* the Freescale MPC8260ADS/MPC8266ADS-PCI boards.
* Copied from the RPX-Classic and SBS8260 stuff.
*
* Author: Vitaly Bordug <vbordug@ru.mvista.com>
*
* Originally written by Dan Malek for Motorola MPC8260 family
*
* Copyright (c) 2001 Dan Malek <dan@embeddedalley.com>
* Copyright (c) 2006 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifdef __KERNEL__
#ifndef __MACH_ADS8260_DEFS
#define __MACH_ADS8260_DEFS
#include <linux/config.h>
#include <asm/ppcboot.h>
/* For our show_cpuinfo hooks. */
#define CPUINFO_VENDOR "Freescale Semiconductor"
#define CPUINFO_MACHINE "PQ2 ADS PowerPC"
/* Backword-compatibility stuff for the drivers */
#define CPM_MAP_ADDR ((uint)0xf0000000)
#define CPM_IRQ_OFFSET 0
/* The ADS8260 has 16, 32-bit wide control/status registers, accessed
* only on word boundaries.
* Not all are used (yet), or are interesting to us (yet).
*/
/* Things of interest in the CSR.
*/
#define BCSR0_LED0 ((uint)0x02000000) /* 0 == on */
#define BCSR0_LED1 ((uint)0x01000000) /* 0 == on */
#define BCSR1_FETHIEN ((uint)0x08000000) /* 0 == enable*/
#define BCSR1_FETH_RST ((uint)0x04000000) /* 0 == reset */
#define BCSR1_RS232_EN1 ((uint)0x02000000) /* 0 ==enable */
#define BCSR1_RS232_EN2 ((uint)0x01000000) /* 0 ==enable */
#define BCSR3_FETHIEN2 ((uint)0x10000000) /* 0 == enable*/
#define BCSR3_FETH2_RS ((uint)0x80000000) /* 0 == reset */
/* cpm serial driver works with constants below */
#define SIU_INT_SMC1 ((uint)0x04+CPM_IRQ_OFFSET)
#define SIU_INT_SMC2i ((uint)0x05+CPM_IRQ_OFFSET)
#define SIU_INT_SCC1 ((uint)0x28+CPM_IRQ_OFFSET)
#define SIU_INT_SCC2 ((uint)0x29+CPM_IRQ_OFFSET)
#define SIU_INT_SCC3 ((uint)0x2a+CPM_IRQ_OFFSET)
#define SIU_INT_SCC4 ((uint)0x2b+CPM_IRQ_OFFSET)
void m82xx_pci_init_irq(void);
void mpc82xx_ads_show_cpuinfo(struct seq_file*);
void m82xx_calibrate_decr(void);
#endif /* __MACH_ADS8260_DEFS */
#endif /* __KERNEL__ */
arch/powerpc/platforms/83xx/Kconfig
View file @ 13bbd8d9
......@@ -5,6 +5,13 @@ choice
prompt "Machine Type"
default MPC834x_SYS
config MPC832x_MDS
bool "Freescale MPC832x MDS"
select DEFAULT_UIMAGE
select QUICC_ENGINE
help
This option enables support for the MPC832x MDS evaluation board.
config MPC834x_SYS
bool "Freescale MPC834x SYS"
select DEFAULT_UIMAGE
......@@ -27,6 +34,12 @@ config MPC834x_ITX
endchoice
config PPC_MPC832x
bool
select PPC_UDBG_16550
select PPC_INDIRECT_PCI
default y if MPC832x_MDS
config MPC834x
bool
select PPC_UDBG_16550
......
arch/powerpc/platforms/83xx/mpc832x_mds.c 0 → 100644
View file @ 13bbd8d9
/*
* Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
*
* Description:
* MPC832xE MDS board specific routines.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/reboot.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/major.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/initrd.h>
#include <asm/system.h>
#include <asm/atomic.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/ipic.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
#include <asm/prom.h>
#include <asm/udbg.h>
#include <sysdev/fsl_soc.h>
#include <asm/qe.h>
#include <asm/qe_ic.h>
#include "mpc83xx.h"
#include "mpc832x_mds.h"
#undef DEBUG
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
#else
#define DBG(fmt...)
#endif
#ifndef CONFIG_PCI
unsigned long isa_io_base = 0;
unsigned long isa_mem_base = 0;
#endif
static u8 *bcsr_regs = NULL;
u8 *get_bcsr(void)
{
return bcsr_regs;
}
/* ************************************************************************
*
* Setup the architecture
*
*/
static void __init mpc832x_sys_setup_arch(void)
{
struct device_node *np;
if (ppc_md.progress)
ppc_md.progress("mpc832x_sys_setup_arch()", 0);
np = of_find_node_by_type(NULL, "cpu");
if (np != 0) {
unsigned int *fp =
(int *)get_property(np, "clock-frequency", NULL);
if (fp != 0)
loops_per_jiffy = *fp / HZ;
else
loops_per_jiffy = 50000000 / HZ;
of_node_put(np);
}
/* Map BCSR area */
np = of_find_node_by_name(NULL, "bcsr");
if (np != 0) {
struct resource res;
of_address_to_resource(np, 0, &res);
bcsr_regs = ioremap(res.start, res.end - res.start +1);
of_node_put(np);
}
#ifdef CONFIG_PCI
for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
add_bridge(np);
ppc_md.pci_swizzle = common_swizzle;
ppc_md.pci_exclude_device = mpc83xx_exclude_device;
#endif
#ifdef CONFIG_QUICC_ENGINE
qe_reset();
if ((np = of_find_node_by_name(np, "par_io")) != NULL) {
par_io_init(np);
of_node_put(np);
for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
par_io_of_config(np);
}
if ((np = of_find_compatible_node(NULL, "network", "ucc_geth"))
!= NULL){
/* Reset the Ethernet PHY */
bcsr_regs[9] &= ~0x20;
udelay(1000);
bcsr_regs[9] |= 0x20;
iounmap(bcsr_regs);
of_node_put(np);
}
#endif /* CONFIG_QUICC_ENGINE */
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
ROOT_DEV = Root_RAM0;
else
#endif
#ifdef CONFIG_ROOT_NFS
ROOT_DEV = Root_NFS;
#else
ROOT_DEV = Root_HDA1;
#endif
}
void __init mpc832x_sys_init_IRQ(void)
{
struct device_node *np;
np = of_find_node_by_type(NULL, "ipic");
if (!np)
return;
ipic_init(np, 0);
/* Initialize the default interrupt mapping priorities,
* in case the boot rom changed something on us.
*/
ipic_set_default_priority();
of_node_put(np);
#ifdef CONFIG_QUICC_ENGINE
np = of_find_node_by_type(NULL, "qeic");
if (!np)
return;
qe_ic_init(np, 0);
of_node_put(np);
#endif /* CONFIG_QUICC_ENGINE */
}
#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374)
extern ulong ds1374_get_rtc_time(void);
extern int ds1374_set_rtc_time(ulong);
static int __init mpc832x_rtc_hookup(void)
{
struct timespec tv;
ppc_md.get_rtc_time = ds1374_get_rtc_time;
ppc_md.set_rtc_time = ds1374_set_rtc_time;
tv.tv_nsec = 0;
tv.tv_sec = (ppc_md.get_rtc_time) ();
do_settimeofday(&tv);
return 0;
}
late_initcall(mpc832x_rtc_hookup);
#endif
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
static int __init mpc832x_sys_probe(void)
{
char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
"model", NULL);
if (model == NULL)
return 0;
if (strcmp(model, "MPC8323EMDS"))
return 0;
DBG("%s found\n", model);
return 1;
}
define_machine(mpc832x_mds) {
.name = "MPC832x MDS",
.probe = mpc832x_sys_probe,
.setup_arch = mpc832x_sys_setup_arch,
.init_IRQ = mpc832x_sys_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};
arch/powerpc/platforms/83xx/mpc832x_mds.h 0 → 100644
View file @ 13bbd8d9
/*
* Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
*
* Description:
* MPC832x MDS board specific header.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#ifndef __MACH_MPC832x_MDS_H__
#define __MACH_MPC832x_MDS_H__
extern u8 *get_bcsr(void);
#endif /* __MACH_MPC832x_MDS_H__ */
arch/powerpc/platforms/83xx/mpc8360e_pb.c 0 → 100644
View file @ 13bbd8d9
/*
* Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
*
* Author: Li Yang <LeoLi@freescale.com>
* Yin Olivia <Hong-hua.Yin@freescale.com>
*
* Description:
* MPC8360E MDS PB board specific routines.
*
* Changelog:
* Jun 21, 2006 Initial version
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/reboot.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/major.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/initrd.h>
#include <asm/system.h>
#include <asm/atomic.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/ipic.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
#include <asm/prom.h>
#include <asm/udbg.h>
#include <sysdev/fsl_soc.h>
#include <asm/qe.h>
#include <asm/qe_ic.h>
#include "mpc83xx.h"
#undef DEBUG
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
#else
#define DBG(fmt...)
#endif
#ifndef CONFIG_PCI
unsigned long isa_io_base = 0;
unsigned long isa_mem_base = 0;
#endif
static u8 *bcsr_regs = NULL;
u8 *get_bcsr(void)
{
return bcsr_regs;
}
/* ************************************************************************
*
* Setup the architecture
*
*/
static void __init mpc8360_sys_setup_arch(void)
{
struct device_node *np;
if (ppc_md.progress)
ppc_md.progress("mpc8360_sys_setup_arch()", 0);
np = of_find_node_by_type(NULL, "cpu");
if (np != 0) {
const unsigned int *fp =
get_property(np, "clock-frequency", NULL);
if (fp != 0)
loops_per_jiffy = *fp / HZ;
else
loops_per_jiffy = 50000000 / HZ;
of_node_put(np);
}
/* Map BCSR area */
np = of_find_node_by_name(NULL, "bcsr");
if (np != 0) {
struct resource res;
of_address_to_resource(np, 0, &res);
bcsr_regs = ioremap(res.start, res.end - res.start +1);
of_node_put(np);
}
#ifdef CONFIG_PCI
for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
add_bridge(np);
ppc_md.pci_swizzle = common_swizzle;
ppc_md.pci_exclude_device = mpc83xx_exclude_device;
#endif
#ifdef CONFIG_QUICC_ENGINE
qe_reset();
if ((np = of_find_node_by_name(np, "par_io")) != NULL) {
par_io_init(np);
of_node_put(np);
for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
par_io_of_config(np);
}
if ((np = of_find_compatible_node(NULL, "network", "ucc_geth"))
!= NULL){
/* Reset the Ethernet PHY */
bcsr_regs[9] &= ~0x20;
udelay(1000);
bcsr_regs[9] |= 0x20;
iounmap(bcsr_regs);
of_node_put(np);
}
#endif /* CONFIG_QUICC_ENGINE */
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
ROOT_DEV = Root_RAM0;
else
#endif
#ifdef CONFIG_ROOT_NFS
ROOT_DEV = Root_NFS;
#else
ROOT_DEV = Root_HDA1;
#endif
}
void __init mpc8360_sys_init_IRQ(void)
{
struct device_node *np;
np = of_find_node_by_type(NULL, "ipic");
if (!np)
return;
ipic_init(np, 0);
/* Initialize the default interrupt mapping priorities,
* in case the boot rom changed something on us.
*/
ipic_set_default_priority();
of_node_put(np);
#ifdef CONFIG_QUICC_ENGINE
np = of_find_node_by_type(NULL, "qeic");
if (!np)
return;
qe_ic_init(np, 0);
of_node_put(np);
#endif /* CONFIG_QUICC_ENGINE */
}
#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374)
extern ulong ds1374_get_rtc_time(void);
extern int ds1374_set_rtc_time(ulong);
static int __init mpc8360_rtc_hookup(void)
{
struct timespec tv;
ppc_md.get_rtc_time = ds1374_get_rtc_time;
ppc_md.set_rtc_time = ds1374_set_rtc_time;
tv.tv_nsec = 0;
tv.tv_sec = (ppc_md.get_rtc_time) ();
do_settimeofday(&tv);
return 0;
}
late_initcall(mpc8360_rtc_hookup);
#endif
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
static int __init mpc8360_sys_probe(void)
{
char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
"model", NULL);
if (model == NULL)
return 0;
if (strcmp(model, "MPC8360EPB"))
return 0;
DBG("MPC8360EMDS-PB found\n");
return 1;
}
define_machine(mpc8360_sys) {
.name = "MPC8360E PB",
.probe = mpc8360_sys_probe,
.setup_arch = mpc8360_sys_setup_arch,
.init_IRQ = mpc8360_sys_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};
arch/powerpc/platforms/cell/interrupt.c
View file @ 13bbd8d9
......@@ -21,6 +21,12 @@
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* TODO:
* - Fix various assumptions related to HW CPU numbers vs. linux CPU numbers
* vs node numbers in the setup code
* - Implement proper handling of maxcpus=1/2 (that is, routing of irqs from
* a non-active node to the active node)
*/
#include <linux/interrupt.h>
......@@ -44,24 +50,25 @@ struct iic {
u8 target_id;
u8 eoi_stack[16];
int eoi_ptr;
struct irq_host *host;
struct device_node *node;
};
static DEFINE_PER_CPU(struct iic, iic);
#define IIC_NODE_COUNT 2
static struct irq_host *iic_hosts[IIC_NODE_COUNT];
static struct irq_host *iic_host;
/* Convert between "pending" bits and hw irq number */
static irq_hw_number_t iic_pending_to_hwnum(struct cbe_iic_pending_bits bits)
{
unsigned char unit = bits.source & 0xf;
unsigned char node = bits.source >> 4;
unsigned char class = bits.class & 3;
/* Decode IPIs */
if (bits.flags & CBE_IIC_IRQ_IPI)
return IIC_IRQ_IPI0 | (bits.prio >> 4);
else if (bits.class <= 3)
return (bits.class << 4) | unit;
return IIC_IRQ_TYPE_IPI | (bits.prio >> 4);
else
return IIC_IRQ_INVALID;
return (node << IIC_IRQ_NODE_SHIFT) | (class << 4) | unit;
}
static void iic_mask(unsigned int irq)
......@@ -86,21 +93,70 @@ static struct irq_chip iic_chip = {
.eoi = iic_eoi,
};
static void iic_ioexc_eoi(unsigned int irq)
{
}
static void iic_ioexc_cascade(unsigned int irq, struct irq_desc *desc,
struct pt_regs *regs)
{
struct cbe_iic_regs *node_iic = desc->handler_data;
unsigned int base = (irq & 0xffffff00) | IIC_IRQ_TYPE_IOEXC;
unsigned long bits, ack;
int cascade;
for (;;) {
bits = in_be64(&node_iic->iic_is);
if (bits == 0)
break;
/* pre-ack edge interrupts */
ack = bits & IIC_ISR_EDGE_MASK;
if (ack)
out_be64(&node_iic->iic_is, ack);
/* handle them */
for (cascade = 63; cascade >= 0; cascade--)
if (bits & (0x8000000000000000UL >> cascade)) {
unsigned int cirq =
irq_linear_revmap(iic_host,
base | cascade);
if (cirq != NO_IRQ)
generic_handle_irq(cirq, regs);
}
/* post-ack level interrupts */
ack = bits & ~IIC_ISR_EDGE_MASK;
if (ack)
out_be64(&node_iic->iic_is, ack);
}
desc->chip->eoi(irq);
}
static struct irq_chip iic_ioexc_chip = {
.typename = " CELL-IOEX",
.mask = iic_mask,
.unmask = iic_unmask,
.eoi = iic_ioexc_eoi,
};
/* Get an IRQ number from the pending state register of the IIC */
static unsigned int iic_get_irq(struct pt_regs *regs)
{
struct cbe_iic_pending_bits pending;
struct iic *iic;
unsigned int virq;
iic = &__get_cpu_var(iic);
*(unsigned long *) &pending =
in_be64((unsigned long __iomem *) &iic->regs->pending_destr);
if (!(pending.flags & CBE_IIC_IRQ_VALID))
return NO_IRQ;
virq = irq_linear_revmap(iic_host, iic_pending_to_hwnum(pending));
if (virq == NO_IRQ)
return NO_IRQ;
iic->eoi_stack[++iic->eoi_ptr] = pending.prio;
BUG_ON(iic->eoi_ptr > 15);
if (pending.flags & CBE_IIC_IRQ_VALID)
return irq_linear_revmap(iic->host,
iic_pending_to_hwnum(pending));
return NO_IRQ;
return virq;
}
#ifdef CONFIG_SMP
......@@ -108,12 +164,7 @@ static unsigned int iic_get_irq(struct pt_regs *regs)
/* Use the highest interrupt priorities for IPI */
static inline int iic_ipi_to_irq(int ipi)
{
return IIC_IRQ_IPI0 + IIC_NUM_IPIS - 1 - ipi;
}
static inline int iic_irq_to_ipi(int irq)
{
return IIC_NUM_IPIS - 1 - (irq - IIC_IRQ_IPI0);
return IIC_IRQ_TYPE_IPI + 0xf - ipi;
}
void iic_setup_cpu(void)
......@@ -123,7 +174,7 @@ void iic_setup_cpu(void)
void iic_cause_IPI(int cpu, int mesg)
{
out_be64(&per_cpu(iic, cpu).regs->generate, (IIC_NUM_IPIS - 1 - mesg) << 4);
out_be64(&per_cpu(iic, cpu).regs->generate, (0xf - mesg) << 4);
}
u8 iic_get_target_id(int cpu)
......@@ -134,9 +185,7 @@ EXPORT_SYMBOL_GPL(iic_get_target_id);
struct irq_host *iic_get_irq_host(int node)
{
if (node < 0 || node >= IIC_NODE_COUNT)
return NULL;
return iic_hosts[node];
return iic_host;
}
EXPORT_SYMBOL_GPL(iic_get_irq_host);
......@@ -149,34 +198,20 @@ static irqreturn_t iic_ipi_action(int irq, void *dev_id, struct pt_regs *regs)
return IRQ_HANDLED;
}
static void iic_request_ipi(int ipi, const char *name)
{
int node, virq;
int virq;
for (node = 0; node < IIC_NODE_COUNT; node++) {
char *rname;
if (iic_hosts[node] == NULL)
continue;
virq = irq_create_mapping(iic_hosts[node],
iic_ipi_to_irq(ipi));
if (virq == NO_IRQ) {
printk(KERN_ERR
"iic: failed to map IPI %s on node %d\n",
name, node);
continue;
}
rname = kzalloc(strlen(name) + 16, GFP_KERNEL);
if (rname)
sprintf(rname, "%s node %d", name, node);
else
rname = (char *)name;
if (request_irq(virq, iic_ipi_action, IRQF_DISABLED,
rname, (void *)(long)ipi))
printk(KERN_ERR
"iic: failed to request IPI %s on node %d\n",
name, node);
virq = irq_create_mapping(iic_host, iic_ipi_to_irq(ipi));
if (virq == NO_IRQ) {
printk(KERN_ERR
"iic: failed to map IPI %s\n", name);
return;
}
if (request_irq(virq, iic_ipi_action, IRQF_DISABLED, name,
(void *)(long)ipi))
printk(KERN_ERR
"iic: failed to request IPI %s\n", name);
}
void iic_request_IPIs(void)
......@@ -193,16 +228,24 @@ void iic_request_IPIs(void)
static int iic_host_match(struct irq_host *h, struct device_node *node)
{
return h->host_data != NULL && node == h->host_data;
return device_is_compatible(node,
"IBM,CBEA-Internal-Interrupt-Controller");
}
static int iic_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
if (hw < IIC_IRQ_IPI0)
set_irq_chip_and_handler(virq, &iic_chip, handle_fasteoi_irq);
else
switch (hw & IIC_IRQ_TYPE_MASK) {
case IIC_IRQ_TYPE_IPI:
set_irq_chip_and_handler(virq, &iic_chip, handle_percpu_irq);
break;
case IIC_IRQ_TYPE_IOEXC:
set_irq_chip_and_handler(virq, &iic_ioexc_chip,
handle_fasteoi_irq);
break;
default:
set_irq_chip_and_handler(virq, &iic_chip, handle_fasteoi_irq);
}
return 0;
}
......@@ -211,11 +254,39 @@ static int iic_host_xlate(struct irq_host *h, struct device_node *ct,
irq_hw_number_t *out_hwirq, unsigned int *out_flags)
{
/* Currently, we don't translate anything. That needs to be fixed as
* we get better defined device-trees. iic interrupts have to be
* explicitely mapped by whoever needs them
*/
return -ENODEV;
unsigned int node, ext, unit, class;
const u32 *val;
if (!device_is_compatible(ct,
"IBM,CBEA-Internal-Interrupt-Controller"))
return -ENODEV;
if (intsize != 1)
return -ENODEV;
val = get_property(ct, "#interrupt-cells", NULL);
if (val == NULL || *val != 1)
return -ENODEV;
node = intspec[0] >> 24;
ext = (intspec[0] >> 16) & 0xff;
class = (intspec[0] >> 8) & 0xff;
unit = intspec[0] & 0xff;
/* Check if node is in supported range */
if (node > 1)
return -EINVAL;
/* Build up interrupt number, special case for IO exceptions */
*out_hwirq = (node << IIC_IRQ_NODE_SHIFT);
if (unit == IIC_UNIT_IIC && class == 1)
*out_hwirq |= IIC_IRQ_TYPE_IOEXC | ext;
else
*out_hwirq |= IIC_IRQ_TYPE_NORMAL |
(class << IIC_IRQ_CLASS_SHIFT) | unit;
/* Dummy flags, ignored by iic code */
*out_flags = IRQ_TYPE_EDGE_RISING;
return 0;
}
static struct irq_host_ops iic_host_ops = {
......@@ -225,7 +296,7 @@ static struct irq_host_ops iic_host_ops = {
};
static void __init init_one_iic(unsigned int hw_cpu, unsigned long addr,
struct irq_host *host)
struct device_node *node)
{
/* XXX FIXME: should locate the linux CPU number from the HW cpu
* number properly. We are lucky for now
......@@ -237,19 +308,19 @@ static void __init init_one_iic(unsigned int hw_cpu, unsigned long addr,
iic->target_id = ((hw_cpu & 2) << 3) | ((hw_cpu & 1) ? 0xf : 0xe);
iic->eoi_stack[0] = 0xff;
iic->host = host;
iic->node = of_node_get(node);
out_be64(&iic->regs->prio, 0);
printk(KERN_INFO "IIC for CPU %d at %lx mapped to %p, target id 0x%x\n",
hw_cpu, addr, iic->regs, iic->target_id);
printk(KERN_INFO "IIC for CPU %d target id 0x%x : %s\n",
hw_cpu, iic->target_id, node->full_name);
}
static int __init setup_iic(void)
{
struct device_node *dn;
struct resource r0, r1;
struct irq_host *host;
int found = 0;
unsigned int node, cascade, found = 0;
struct cbe_iic_regs *node_iic;
const u32 *np;
for (dn = NULL;
......@@ -269,19 +340,33 @@ static int __init setup_iic(void)
of_node_put(dn);
return -ENODEV;
}
host = NULL;
if (found < IIC_NODE_COUNT) {
host = irq_alloc_host(IRQ_HOST_MAP_LINEAR,
IIC_SOURCE_COUNT,
&iic_host_ops,
IIC_IRQ_INVALID);
iic_hosts[found] = host;
BUG_ON(iic_hosts[found] == NULL);
iic_hosts[found]->host_data = of_node_get(dn);
found++;
}
init_one_iic(np[0], r0.start, host);
init_one_iic(np[1], r1.start, host);
found++;
init_one_iic(np[0], r0.start, dn);
init_one_iic(np[1], r1.start, dn);
/* Setup cascade for IO exceptions. XXX cleanup tricks to get
* node vs CPU etc...
* Note that we configure the IIC_IRR here with a hard coded
* priority of 1. We might want to improve that later.
*/
node = np[0] >> 1;
node_iic = cbe_get_cpu_iic_regs(np[0]);
cascade = node << IIC_IRQ_NODE_SHIFT;
cascade |= 1 << IIC_IRQ_CLASS_SHIFT;
cascade |= IIC_UNIT_IIC;
cascade = irq_create_mapping(iic_host, cascade);
if (cascade == NO_IRQ)
continue;
set_irq_data(cascade, node_iic);
set_irq_chained_handler(cascade , iic_ioexc_cascade);
out_be64(&node_iic->iic_ir,
(1 << 12) /* priority */ |
(node << 4) /* dest node */ |
IIC_UNIT_THREAD_0 /* route them to thread 0 */);
/* Flush pending (make sure it triggers if there is
* anything pending
*/
out_be64(&node_iic->iic_is, 0xfffffffffffffffful);
}
if (found)
......@@ -292,6 +377,12 @@ static int __init setup_iic(void)
void __init iic_init_IRQ(void)
{
/* Setup an irq host data structure */
iic_host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, IIC_SOURCE_COUNT,
&iic_host_ops, IIC_IRQ_INVALID);
BUG_ON(iic_host == NULL);
irq_set_default_host(iic_host);
/* Discover and initialize iics */
if (setup_iic() < 0)
panic("IIC: Failed to initialize !\n");
......
arch/powerpc/platforms/cell/interrupt.h
View file @ 13bbd8d9
......@@ -2,48 +2,76 @@
#define ASM_CELL_PIC_H
#ifdef __KERNEL__
/*
* Mapping of IIC pending bits into per-node
* interrupt numbers.
* Mapping of IIC pending bits into per-node interrupt numbers.
*
* IRQ FF CC SS PP FF CC SS PP Description
* Interrupt numbers are in the range 0...0x1ff where the top bit
* (0x100) represent the source node. Only 2 nodes are supported with
* the current code though it's trivial to extend that if necessary using
* higher level bits
*
* 00-3f 80 02 +0 00 - 80 02 +0 3f South Bridge
* 00-3f 80 02 +b 00 - 80 02 +b 3f South Bridge
* 41-4a 80 00 +1 ** - 80 00 +a ** SPU Class 0
* 51-5a 80 01 +1 ** - 80 01 +a ** SPU Class 1
* 61-6a 80 02 +1 ** - 80 02 +a ** SPU Class 2
* 70-7f C0 ** ** 00 - C0 ** ** 0f IPI
* The bottom 8 bits are split into 2 type bits and 6 data bits that
* depend on the type:
*
* F flags
* C class
* S source
* P Priority
* + node number
* * don't care
* 00 (0x00 | data) : normal interrupt. data is (class << 4) | source
* 01 (0x40 | data) : IO exception. data is the exception number as
* defined by bit numbers in IIC_SR
* 10 (0x80 | data) : IPI. data is the IPI number (obtained from the priority)
* and node is always 0 (IPIs are per-cpu, their source is
* not relevant)
* 11 (0xc0 | data) : reserved
*
* A node consists of a Cell Broadband Engine and an optional
* south bridge device providing a maximum of 64 IRQs.
* The south bridge may be connected to either IOIF0
* or IOIF1.
* Each SPE is represented as three IRQ lines, one per
* interrupt class.
* 16 IRQ numbers are reserved for inter processor
* interruptions, although these are only used in the
* range of the first node.
* In addition, interrupt number 0x80000000 is defined as always invalid
* (that is the node field is expected to never extend to move than 23 bits)
*
* This scheme needs 128 IRQ numbers per BIF node ID,
* which means that with the total of 512 lines
* available, we can have a maximum of four nodes.
*/
enum {
IIC_IRQ_INVALID = 0xff,
IIC_IRQ_MAX = 0x3f,
IIC_IRQ_EXT_IOIF0 = 0x20,
IIC_IRQ_EXT_IOIF1 = 0x2b,
IIC_IRQ_IPI0 = 0x40,
IIC_NUM_IPIS = 0x10, /* IRQs reserved for IPI */
IIC_SOURCE_COUNT = 0x50,
IIC_IRQ_INVALID = 0x80000000u,
IIC_IRQ_NODE_MASK = 0x100,
IIC_IRQ_NODE_SHIFT = 8,
IIC_IRQ_MAX = 0x1ff,
IIC_IRQ_TYPE_MASK = 0xc0,
IIC_IRQ_TYPE_NORMAL = 0x00,
IIC_IRQ_TYPE_IOEXC = 0x40,
IIC_IRQ_TYPE_IPI = 0x80,
IIC_IRQ_CLASS_SHIFT = 4,
IIC_IRQ_CLASS_0 = 0x00,
IIC_IRQ_CLASS_1 = 0x10,
IIC_IRQ_CLASS_2 = 0x20,
IIC_SOURCE_COUNT = 0x200,
/* Here are defined the various source/dest units. Avoid using those
* definitions if you can, they are mostly here for reference
*/
IIC_UNIT_SPU_0 = 0x4,
IIC_UNIT_SPU_1 = 0x7,
IIC_UNIT_SPU_2 = 0x3,
IIC_UNIT_SPU_3 = 0x8,
IIC_UNIT_SPU_4 = 0x2,
IIC_UNIT_SPU_5 = 0x9,
IIC_UNIT_SPU_6 = 0x1,
IIC_UNIT_SPU_7 = 0xa,
IIC_UNIT_IOC_0 = 0x0,
IIC_UNIT_IOC_1 = 0xb,
IIC_UNIT_THREAD_0 = 0xe, /* target only */
IIC_UNIT_THREAD_1 = 0xf, /* target only */
IIC_UNIT_IIC = 0xe, /* source only (IO exceptions) */
/* Base numbers for the external interrupts */
IIC_IRQ_EXT_IOIF0 =
IIC_IRQ_TYPE_NORMAL | IIC_IRQ_CLASS_2 | IIC_UNIT_IOC_0,
IIC_IRQ_EXT_IOIF1 =
IIC_IRQ_TYPE_NORMAL | IIC_IRQ_CLASS_2 | IIC_UNIT_IOC_1,
/* Base numbers for the IIC_ISR interrupts */
IIC_IRQ_IOEX_TMI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 63,
IIC_IRQ_IOEX_PMI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 62,
IIC_IRQ_IOEX_ATI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 61,
IIC_IRQ_IOEX_MATBFI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 60,
IIC_IRQ_IOEX_ELDI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 59,
/* Which bits in IIC_ISR are edge sensitive */
IIC_ISR_EDGE_MASK = 0x4ul,
};
extern void iic_init_IRQ(void);
......@@ -52,7 +80,6 @@ extern void iic_request_IPIs(void);
extern void iic_setup_cpu(void);
extern u8 iic_get_target_id(int cpu);
extern struct irq_host *iic_get_irq_host(int node);
extern void spider_init_IRQ(void);
......
arch/powerpc/platforms/cell/spider-pic.c
View file @ 13bbd8d9
......@@ -243,7 +243,6 @@ static unsigned int __init spider_find_cascade_and_node(struct spider_pic *pic)
const u32 *imap, *tmp;
int imaplen, intsize, unit;
struct device_node *iic;
struct irq_host *iic_host;
#if 0 /* Enable that when we have a way to retreive the node as well */
/* First, we check wether we have a real "interrupts" in the device
......@@ -289,11 +288,11 @@ static unsigned int __init spider_find_cascade_and_node(struct spider_pic *pic)
* the iic host from the iic OF node, but that way I'm still compatible
* with really really old old firmwares for which we don't have a node
*/
iic_host = iic_get_irq_host(pic->node_id);
if (iic_host == NULL)
return NO_IRQ;
/* Manufacture an IIC interrupt number of class 2 */
virq = irq_create_mapping(iic_host, 0x20 | unit);
virq = irq_create_mapping(NULL,
(pic->node_id << IIC_IRQ_NODE_SHIFT) |
(2 << IIC_IRQ_CLASS_SHIFT) |
unit);
if (virq == NO_IRQ)
printk(KERN_ERR "spider_pic: failed to map cascade !");
return virq;
......
arch/powerpc/platforms/cell/spu_base.c
View file @ 13bbd8d9
......@@ -568,24 +568,23 @@ static void spu_unmap(struct spu *spu)
/* This function shall be abstracted for HV platforms */
static int __init spu_map_interrupts(struct spu *spu, struct device_node *np)
{
struct irq_host *host;
unsigned int isrc;
const u32 *tmp;
host = iic_get_irq_host(spu->node);
if (host == NULL)
return -ENODEV;
/* Get the interrupt source from the device-tree */
/* Get the interrupt source unit from the device-tree */
tmp = get_property(np, "isrc", NULL);
if (!tmp)
return -ENODEV;
spu->isrc = isrc = tmp[0];
isrc = tmp[0];
/* Add the node number */
isrc |= spu->node << IIC_IRQ_NODE_SHIFT;
spu->isrc = isrc;
/* Now map interrupts of all 3 classes */
spu->irqs[0] = irq_create_mapping(host, 0x00 | isrc);
spu->irqs[1] = irq_create_mapping(host, 0x10 | isrc);
spu->irqs[2] = irq_create_mapping(host, 0x20 | isrc);
spu->irqs[0] = irq_create_mapping(NULL, IIC_IRQ_CLASS_0 | isrc);
spu->irqs[1] = irq_create_mapping(NULL, IIC_IRQ_CLASS_1 | isrc);
spu->irqs[2] = irq_create_mapping(NULL, IIC_IRQ_CLASS_2 | isrc);
/* Right now, we only fail if class 2 failed */
return spu->irqs[2] == NO_IRQ ? -EINVAL : 0;
......
arch/powerpc/platforms/iseries/pci.c
View file @ 13bbd8d9
......@@ -262,14 +262,6 @@ void __init iSeries_pci_final_fixup(void)
mf_display_src(0xC9000200);
}
void pcibios_fixup_bus(struct pci_bus *PciBus)
{
}
void pcibios_fixup_resources(struct pci_dev *pdev)
{
}
/*
* Look down the chain to find the matching Device Device
*/
......
arch/powerpc/platforms/iseries/setup.c
View file @ 13bbd8d9
......@@ -649,15 +649,21 @@ static void iseries_dedicated_idle(void)
void __init iSeries_init_IRQ(void) { }
#endif
/*
* iSeries has no legacy IO, anything calling this function has to
* fail or bad things will happen
*/
static int iseries_check_legacy_ioport(unsigned int baseport)
{
return -ENODEV;
}
static int __init iseries_probe(void)
{
unsigned long root = of_get_flat_dt_root();
if (!of_flat_dt_is_compatible(root, "IBM,iSeries"))
return 0;
powerpc_firmware_features |= FW_FEATURE_ISERIES;
powerpc_firmware_features |= FW_FEATURE_LPAR;
hpte_init_iSeries();
return 1;
......@@ -680,6 +686,7 @@ define_machine(iseries) {
.calibrate_decr = generic_calibrate_decr,
.progress = iSeries_progress,
.probe = iseries_probe,
.check_legacy_ioport = iseries_check_legacy_ioport,
/* XXX Implement enable_pmcs for iSeries */
};
......@@ -687,6 +694,9 @@ void * __init iSeries_early_setup(void)
{
unsigned long phys_mem_size;
powerpc_firmware_features |= FW_FEATURE_ISERIES;
powerpc_firmware_features |= FW_FEATURE_LPAR;
iSeries_fixup_klimit();
/*
......
arch/powerpc/platforms/powermac/udbg_scc.c
View file @ 13bbd8d9
......@@ -111,8 +111,6 @@ void udbg_scc_init(int force_scc)
pmac_call_feature(PMAC_FTR_SCC_ENABLE, ch,
PMAC_SCC_ASYNC | PMAC_SCC_FLAG_XMON, 1);
/* Setup for 57600 8N1 */
if (ch == ch_a)
addr += 0x20;
sccc = ioremap(addr & PAGE_MASK, PAGE_SIZE) ;
......@@ -125,9 +123,21 @@ void udbg_scc_init(int force_scc)
x = in_8(sccc);
out_8(sccc, 0x09); /* reset A or B side */
out_8(sccc, 0xc0);
/* If SCC was the OF output port, read the BRG value, else
* Setup for 57600 8N1
*/
if (ch_def != NULL) {
out_8(sccc, 13);
scc_inittab[1] = in_8(sccc);
out_8(sccc, 12);
scc_inittab[3] = in_8(sccc);
}
for (i = 0; i < sizeof(scc_inittab); ++i)
out_8(sccc, scc_inittab[i]);
udbg_putc = udbg_scc_putc;
udbg_getc = udbg_scc_getc;
udbg_getc_poll = udbg_scc_getc_poll;
......
arch/powerpc/platforms/pseries/setup.c
View file @ 13bbd8d9
......@@ -180,7 +180,7 @@ static void __init pseries_mpic_init_IRQ(void)
cascade_irq = irq_of_parse_and_map(cascade, 0);
if (cascade == NO_IRQ) {
printk(KERN_ERR "xics: failed to map cascade interrupt");
printk(KERN_ERR "mpic: failed to map cascade interrupt");
return;
}
......
arch/powerpc/sysdev/Makefile
View file @ 13bbd8d9
......@@ -12,6 +12,7 @@ obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o
obj-$(CONFIG_FSL_SOC) += fsl_soc.o
obj-$(CONFIG_PPC_TODC) += todc.o
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
obj-$(CONFIG_QUICC_ENGINE) += qe_lib/
ifeq ($(CONFIG_PPC_MERGE),y)
obj-$(CONFIG_PPC_I8259) += i8259.o
......
arch/powerpc/sysdev/cpm2_pic.c
View file @ 13bbd8d9
......@@ -147,7 +147,7 @@ static struct irq_chip cpm2_pic = {
.end = cpm2_end_irq,
};
int cpm2_get_irq(struct pt_regs *regs)
unsigned int cpm2_get_irq(struct pt_regs *regs)
{
int irq;
unsigned long bits;
......
arch/powerpc/sysdev/cpm2_pic.h
View file @ 13bbd8d9
......@@ -3,7 +3,7 @@
extern intctl_cpm2_t *cpm2_intctl;
extern int cpm2_get_irq(struct pt_regs *regs);
extern unsigned int cpm2_get_irq(struct pt_regs *regs);
extern void cpm2_pic_init(struct device_node*);
......
arch/powerpc/sysdev/fsl_soc.c
View file @ 13bbd8d9
......@@ -37,6 +37,7 @@
#include <asm/cpm2.h>
extern void init_fcc_ioports(struct fs_platform_info*);
extern void init_scc_ioports(struct fs_uart_platform_info*);
static phys_addr_t immrbase = -1;
phys_addr_t get_immrbase(void)
......@@ -566,7 +567,7 @@ static int __init fs_enet_of_init(void)
struct resource r[4];
struct device_node *phy, *mdio;
struct fs_platform_info fs_enet_data;
const unsigned int *id, *phy_addr;
const unsigned int *id, *phy_addr, phy_irq;
const void *mac_addr;
const phandle *ph;
const char *model;
......@@ -588,6 +589,7 @@ static int __init fs_enet_of_init(void)
if (ret)
goto err;
r[2].name = fcc_regs_c;
fs_enet_data.fcc_regs_c = r[2].start;
r[3].start = r[3].end = irq_of_parse_and_map(np, 0);
r[3].flags = IORESOURCE_IRQ;
......@@ -620,6 +622,8 @@ static int __init fs_enet_of_init(void)
phy_addr = get_property(phy, "reg", NULL);
fs_enet_data.phy_addr = *phy_addr;
phy_irq = get_property(phy, "interrupts", NULL);
id = get_property(np, "device-id", NULL);
fs_enet_data.fs_no = *id;
strcpy(fs_enet_data.fs_type, model);
......@@ -637,6 +641,7 @@ static int __init fs_enet_of_init(void)
if (strstr(model, "FCC")) {
int fcc_index = *id - 1;
unsigned char* mdio_bb_prop;
fs_enet_data.dpram_offset = (u32)cpm_dpram_addr(0);
fs_enet_data.rx_ring = 32;
......@@ -652,14 +657,57 @@ static int __init fs_enet_of_init(void)
(u32)res.start, fs_enet_data.phy_addr);
fs_enet_data.bus_id = (char*)&bus_id[(*id)];
fs_enet_data.init_ioports = init_fcc_ioports;
}
of_node_put(phy);
of_node_put(mdio);
mdio_bb_prop = get_property(phy, "bitbang", NULL);
if (mdio_bb_prop) {
struct platform_device *fs_enet_mdio_bb_dev;
struct fs_mii_bb_platform_info fs_enet_mdio_bb_data;
fs_enet_mdio_bb_dev =
platform_device_register_simple("fsl-bb-mdio",
i, NULL, 0);
memset(&fs_enet_mdio_bb_data, 0,
sizeof(struct fs_mii_bb_platform_info));
fs_enet_mdio_bb_data.mdio_dat.bit =
mdio_bb_prop[0];
fs_enet_mdio_bb_data.mdio_dir.bit =
mdio_bb_prop[1];
fs_enet_mdio_bb_data.mdc_dat.bit =
mdio_bb_prop[2];
fs_enet_mdio_bb_data.mdio_port =
mdio_bb_prop[3];
fs_enet_mdio_bb_data.mdc_port =
mdio_bb_prop[4];
fs_enet_mdio_bb_data.delay =
mdio_bb_prop[5];
fs_enet_mdio_bb_data.irq[0] = phy_irq[0];
fs_enet_mdio_bb_data.irq[1] = -1;
fs_enet_mdio_bb_data.irq[2] = -1;
fs_enet_mdio_bb_data.irq[3] = phy_irq[0];
fs_enet_mdio_bb_data.irq[31] = -1;
fs_enet_mdio_bb_data.mdio_dat.offset =
(u32)&cpm2_immr->im_ioport.iop_pdatc;
fs_enet_mdio_bb_data.mdio_dir.offset =
(u32)&cpm2_immr->im_ioport.iop_pdirc;
fs_enet_mdio_bb_data.mdc_dat.offset =
(u32)&cpm2_immr->im_ioport.iop_pdatc;
ret = platform_device_add_data(
fs_enet_mdio_bb_dev,
&fs_enet_mdio_bb_data,
sizeof(struct fs_mii_bb_platform_info));
if (ret)
goto unreg;
}
of_node_put(phy);
of_node_put(mdio);
ret = platform_device_add_data(fs_enet_dev, &fs_enet_data,
sizeof(struct
fs_platform_info));
ret = platform_device_add_data(fs_enet_dev, &fs_enet_data,
sizeof(struct
fs_platform_info));
if (ret)
goto unreg;
}
......
arch/powerpc/sysdev/qe_lib/Kconfig 0 → 100644
View file @ 13bbd8d9
#
# QE Communication options
#
menu "QE Options"
depends on QUICC_ENGINE
config UCC_SLOW
bool "UCC Slow Protocols Support"
default n
select UCC
help
This option provides qe_lib support to UCC slow
protocols: UART, BISYNC, QMC
config UCC_FAST
bool "UCC Fast Protocols Support"
default n
select UCC
select UCC_SLOW
help
This option provides qe_lib support to UCC fast
protocols: HDLC, Ethernet, ATM, transparent
config UCC
bool
default y if UCC_FAST || UCC_SLOW
endmenu
arch/powerpc/sysdev/qe_lib/Makefile 0 → 100644
View file @ 13bbd8d9
#
# Makefile for the linux ppc-specific parts of QE
#
obj-$(CONFIG_QUICC_ENGINE)+= qe.o qe_ic.o qe_io.o
obj-$(CONFIG_UCC) += ucc.o
obj-$(CONFIG_UCC_SLOW) += ucc_slow.o
obj-$(CONFIG_UCC_FAST) += ucc_fast.o
arch/powerpc/sysdev/qe_lib/qe.c 0 → 100644
View file @ 13bbd8d9
/*
* Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
* Based on cpm2_common.c from Dan Malek (dmalek@jlc.net)
*
* Description:
* General Purpose functions for the global management of the
* QUICC Engine (QE).
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/bootmem.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <asm/irq.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/immap_qe.h>
#include <asm/qe.h>
#include <asm/prom.h>
#include <asm/rheap.h>
static void qe_snums_init(void);
static void qe_muram_init(void);
static int qe_sdma_init(void);
static DEFINE_SPINLOCK(qe_lock);
/* QE snum state */
enum qe_snum_state {
QE_SNUM_STATE_USED,
QE_SNUM_STATE_FREE
};
/* QE snum */
struct qe_snum {
u8 num;
enum qe_snum_state state;
};
/* We allocate this here because it is used almost exclusively for
* the communication processor devices.
*/
struct qe_immap *qe_immr = NULL;
EXPORT_SYMBOL(qe_immr);
static struct qe_snum snums[QE_NUM_OF_SNUM]; /* Dynamically allocated SNUMs */
static phys_addr_t qebase = -1;
phys_addr_t get_qe_base(void)
{
struct device_node *qe;
if (qebase != -1)
return qebase;
qe = of_find_node_by_type(NULL, "qe");
if (qe) {
unsigned int size;
const void *prop = get_property(qe, "reg", &size);
qebase = of_translate_address(qe, prop);
of_node_put(qe);
};
return qebase;
}
EXPORT_SYMBOL(get_qe_base);
void qe_reset(void)
{
if (qe_immr == NULL)
qe_immr = ioremap(get_qe_base(), QE_IMMAP_SIZE);
qe_snums_init();
qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID,
QE_CR_PROTOCOL_UNSPECIFIED, 0);
/* Reclaim the MURAM memory for our use. */
qe_muram_init();
if (qe_sdma_init())
panic("sdma init failed!");
}
int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
{
unsigned long flags;
u8 mcn_shift = 0, dev_shift = 0;
spin_lock_irqsave(&qe_lock, flags);
if (cmd == QE_RESET) {
out_be32(&qe_immr->cp.cecr, (u32) (cmd | QE_CR_FLG));
} else {
if (cmd == QE_ASSIGN_PAGE) {
/* Here device is the SNUM, not sub-block */
dev_shift = QE_CR_SNUM_SHIFT;
} else if (cmd == QE_ASSIGN_RISC) {
/* Here device is the SNUM, and mcnProtocol is
* e_QeCmdRiscAssignment value */
dev_shift = QE_CR_SNUM_SHIFT;
mcn_shift = QE_CR_MCN_RISC_ASSIGN_SHIFT;
} else {
if (device == QE_CR_SUBBLOCK_USB)
mcn_shift = QE_CR_MCN_USB_SHIFT;
else
mcn_shift = QE_CR_MCN_NORMAL_SHIFT;
}
out_be32(&qe_immr->cp.cecdr,
immrbar_virt_to_phys((void *)cmd_input));
out_be32(&qe_immr->cp.cecr,
(cmd | QE_CR_FLG | ((u32) device << dev_shift) | (u32)
mcn_protocol << mcn_shift));
}
/* wait for the QE_CR_FLG to clear */
while(in_be32(&qe_immr->cp.cecr) & QE_CR_FLG)
cpu_relax();
spin_unlock_irqrestore(&qe_lock, flags);
return 0;
}
EXPORT_SYMBOL(qe_issue_cmd);
/* Set a baud rate generator. This needs lots of work. There are
* 16 BRGs, which can be connected to the QE channels or output
* as clocks. The BRGs are in two different block of internal
* memory mapped space.
* The baud rate clock is the system clock divided by something.
* It was set up long ago during the initial boot phase and is
* is given to us.
* Baud rate clocks are zero-based in the driver code (as that maps
* to port numbers). Documentation uses 1-based numbering.
*/
static unsigned int brg_clk = 0;
unsigned int get_brg_clk(void)
{
struct device_node *qe;
if (brg_clk)
return brg_clk;
qe = of_find_node_by_type(NULL, "qe");
if (qe) {
unsigned int size;
const u32 *prop = get_property(qe, "brg-frequency", &size);
brg_clk = *prop;
of_node_put(qe);
};
return brg_clk;
}
/* This function is used by UARTS, or anything else that uses a 16x
* oversampled clock.
*/
void qe_setbrg(u32 brg, u32 rate)
{
volatile u32 *bp;
u32 divisor, tempval;
int div16 = 0;
bp = &qe_immr->brg.brgc1;
bp += brg;
divisor = (get_brg_clk() / rate);
if (divisor > QE_BRGC_DIVISOR_MAX + 1) {
div16 = 1;
divisor /= 16;
}
tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | QE_BRGC_ENABLE;
if (div16)
tempval |= QE_BRGC_DIV16;
out_be32(bp, tempval);
}
/* Initialize SNUMs (thread serial numbers) according to
* QE Module Control chapter, SNUM table
*/
static void qe_snums_init(void)
{
int i;
static const u8 snum_init[] = {
0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9,
0xD8, 0xD9, 0xE8, 0xE9,
};
for (i = 0; i < QE_NUM_OF_SNUM; i++) {
snums[i].num = snum_init[i];
snums[i].state = QE_SNUM_STATE_FREE;
}
}
int qe_get_snum(void)
{
unsigned long flags;
int snum = -EBUSY;
int i;
spin_lock_irqsave(&qe_lock, flags);
for (i = 0; i < QE_NUM_OF_SNUM; i++) {
if (snums[i].state == QE_SNUM_STATE_FREE) {
snums[i].state = QE_SNUM_STATE_USED;
snum = snums[i].num;
break;
}
}
spin_unlock_irqrestore(&qe_lock, flags);
return snum;
}
EXPORT_SYMBOL(qe_get_snum);
void qe_put_snum(u8 snum)
{
int i;
for (i = 0; i < QE_NUM_OF_SNUM; i++) {
if (snums[i].num == snum) {
snums[i].state = QE_SNUM_STATE_FREE;
break;
}
}
}
EXPORT_SYMBOL(qe_put_snum);
static int qe_sdma_init(void)
{
struct sdma *sdma = &qe_immr->sdma;
u32 sdma_buf_offset;
if (!sdma)
return -ENODEV;
/* allocate 2 internal temporary buffers (512 bytes size each) for
* the SDMA */
sdma_buf_offset = qe_muram_alloc(512 * 2, 64);
if (IS_MURAM_ERR(sdma_buf_offset))
return -ENOMEM;
out_be32(&sdma->sdebcr, sdma_buf_offset & QE_SDEBCR_BA_MASK);
out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK | (0x1 >>
QE_SDMR_CEN_SHIFT)));
return 0;
}
/*
* muram_alloc / muram_free bits.
*/
static DEFINE_SPINLOCK(qe_muram_lock);
/* 16 blocks should be enough to satisfy all requests
* until the memory subsystem goes up... */
static rh_block_t qe_boot_muram_rh_block[16];
static rh_info_t qe_muram_info;
static void qe_muram_init(void)
{
struct device_node *np;
u32 address;
u64 size;
unsigned int flags;
/* initialize the info header */
rh_init(&qe_muram_info, 1,
sizeof(qe_boot_muram_rh_block) /
sizeof(qe_boot_muram_rh_block[0]), qe_boot_muram_rh_block);
/* Attach the usable muram area */
/* XXX: This is a subset of the available muram. It
* varies with the processor and the microcode patches activated.
*/
if ((np = of_find_node_by_name(NULL, "data-only")) != NULL) {
address = *of_get_address(np, 0, &size, &flags);
of_node_put(np);
rh_attach_region(&qe_muram_info,
(void *)address, (int)size);
}
}
/* This function returns an index into the MURAM area.
*/
u32 qe_muram_alloc(u32 size, u32 align)
{
void *start;
unsigned long flags;
spin_lock_irqsave(&qe_muram_lock, flags);
start = rh_alloc_align(&qe_muram_info, size, align, "QE");
spin_unlock_irqrestore(&qe_muram_lock, flags);
return (u32) start;
}
EXPORT_SYMBOL(qe_muram_alloc);
int qe_muram_free(u32 offset)
{
int ret;
unsigned long flags;
spin_lock_irqsave(&qe_muram_lock, flags);
ret = rh_free(&qe_muram_info, (void *)offset);
spin_unlock_irqrestore(&qe_muram_lock, flags);
return ret;
}
EXPORT_SYMBOL(qe_muram_free);
/* not sure if this is ever needed */
u32 qe_muram_alloc_fixed(u32 offset, u32 size)
{
void *start;
unsigned long flags;
spin_lock_irqsave(&qe_muram_lock, flags);
start = rh_alloc_fixed(&qe_muram_info, (void *)offset, size, "commproc");
spin_unlock_irqrestore(&qe_muram_lock, flags);
return (u32) start;
}
EXPORT_SYMBOL(qe_muram_alloc_fixed);
void qe_muram_dump(void)
{
rh_dump(&qe_muram_info);
}
EXPORT_SYMBOL(qe_muram_dump);
void *qe_muram_addr(u32 offset)
{
return (void *)&qe_immr->muram[offset];
}
EXPORT_SYMBOL(qe_muram_addr);
arch/powerpc/sysdev/qe_lib/qe_ic.c 0 → 100644
View file @ 13bbd8d9
/*
* arch/powerpc/sysdev/qe_lib/qe_ic.c
*
* Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
*
* Author: Li Yang <leoli@freescale.com>
* Based on code from Shlomi Gridish <gridish@freescale.com>
*
* QUICC ENGINE Interrupt Controller
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/reboot.h>
#include <linux/slab.h>
#include <linux/stddef.h>
#include <linux/sched.h>
#include <linux/signal.h>
#include <linux/sysdev.h>
#include <linux/device.h>
#include <linux/bootmem.h>
#include <linux/spinlock.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/qe_ic.h>
#include "qe_ic.h"
static DEFINE_SPINLOCK(qe_ic_lock);
static struct qe_ic_info qe_ic_info[] = {
[1] = {
.mask = 0x00008000,
.mask_reg = QEIC_CIMR,
.pri_code = 0,
.pri_reg = QEIC_CIPWCC,
},
[2] = {
.mask = 0x00004000,
.mask_reg = QEIC_CIMR,
.pri_code = 1,
.pri_reg = QEIC_CIPWCC,
},
[3] = {
.mask = 0x00002000,
.mask_reg = QEIC_CIMR,
.pri_code = 2,
.pri_reg = QEIC_CIPWCC,
},
[10] = {
.mask = 0x00000040,
.mask_reg = QEIC_CIMR,
.pri_code = 1,
.pri_reg = QEIC_CIPZCC,
},
[11] = {
.mask = 0x00000020,
.mask_reg = QEIC_CIMR,
.pri_code = 2,
.pri_reg = QEIC_CIPZCC,
},
[12] = {
.mask = 0x00000010,
.mask_reg = QEIC_CIMR,
.pri_code = 3,
.pri_reg = QEIC_CIPZCC,
},
[13] = {
.mask = 0x00000008,
.mask_reg = QEIC_CIMR,
.pri_code = 4,
.pri_reg = QEIC_CIPZCC,
},
[14] = {
.mask = 0x00000004,
.mask_reg = QEIC_CIMR,
.pri_code = 5,
.pri_reg = QEIC_CIPZCC,
},
[15] = {
.mask = 0x00000002,
.mask_reg = QEIC_CIMR,
.pri_code = 6,
.pri_reg = QEIC_CIPZCC,
},
[20] = {
.mask = 0x10000000,
.mask_reg = QEIC_CRIMR,
.pri_code = 3,
.pri_reg = QEIC_CIPRTA,
},
[25] = {
.mask = 0x00800000,
.mask_reg = QEIC_CRIMR,
.pri_code = 0,
.pri_reg = QEIC_CIPRTB,
},
[26] = {
.mask = 0x00400000,
.mask_reg = QEIC_CRIMR,
.pri_code = 1,
.pri_reg = QEIC_CIPRTB,
},
[27] = {
.mask = 0x00200000,
.mask_reg = QEIC_CRIMR,
.pri_code = 2,
.pri_reg = QEIC_CIPRTB,
},
[28] = {
.mask = 0x00100000,
.mask_reg = QEIC_CRIMR,
.pri_code = 3,
.pri_reg = QEIC_CIPRTB,
},
[32] = {
.mask = 0x80000000,
.mask_reg = QEIC_CIMR,
.pri_code = 0,
.pri_reg = QEIC_CIPXCC,
},
[33] = {
.mask = 0x40000000,
.mask_reg = QEIC_CIMR,
.pri_code = 1,
.pri_reg = QEIC_CIPXCC,
},
[34] = {
.mask = 0x20000000,
.mask_reg = QEIC_CIMR,
.pri_code = 2,
.pri_reg = QEIC_CIPXCC,
},
[35] = {
.mask = 0x10000000,
.mask_reg = QEIC_CIMR,
.pri_code = 3,
.pri_reg = QEIC_CIPXCC,
},
[36] = {
.mask = 0x08000000,
.mask_reg = QEIC_CIMR,
.pri_code = 4,
.pri_reg = QEIC_CIPXCC,
},
[40] = {
.mask = 0x00800000,
.mask_reg = QEIC_CIMR,
.pri_code = 0,
.pri_reg = QEIC_CIPYCC,
},
[41] = {
.mask = 0x00400000,
.mask_reg = QEIC_CIMR,
.pri_code = 1,
.pri_reg = QEIC_CIPYCC,
},
[42] = {
.mask = 0x00200000,
.mask_reg = QEIC_CIMR,
.pri_code = 2,
.pri_reg = QEIC_CIPYCC,
},
[43] = {
.mask = 0x00100000,
.mask_reg = QEIC_CIMR,
.pri_code = 3,
.pri_reg = QEIC_CIPYCC,
},
};
static inline u32 qe_ic_read(volatile __be32 __iomem * base, unsigned int reg)
{
return in_be32(base + (reg >> 2));
}
static inline void qe_ic_write(volatile __be32 __iomem * base, unsigned int reg,
u32 value)
{
out_be32(base + (reg >> 2), value);
}
static inline struct qe_ic *qe_ic_from_irq(unsigned int virq)
{
return irq_desc[virq].chip_data;
}
#define virq_to_hw(virq) ((unsigned int)irq_map[virq].hwirq)
static void qe_ic_unmask_irq(unsigned int virq)
{
struct qe_ic *qe_ic = qe_ic_from_irq(virq);
unsigned int src = virq_to_hw(virq);
unsigned long flags;
u32 temp;
spin_lock_irqsave(&qe_ic_lock, flags);
temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
temp | qe_ic_info[src].mask);
spin_unlock_irqrestore(&qe_ic_lock, flags);
}
static void qe_ic_mask_irq(unsigned int virq)
{
struct qe_ic *qe_ic = qe_ic_from_irq(virq);
unsigned int src = virq_to_hw(virq);
unsigned long flags;
u32 temp;
spin_lock_irqsave(&qe_ic_lock, flags);
temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
temp & ~qe_ic_info[src].mask);
spin_unlock_irqrestore(&qe_ic_lock, flags);
}
static void qe_ic_mask_irq_and_ack(unsigned int virq)
{
struct qe_ic *qe_ic = qe_ic_from_irq(virq);
unsigned int src = virq_to_hw(virq);
unsigned long flags;
u32 temp;
spin_lock_irqsave(&qe_ic_lock, flags);
temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
temp & ~qe_ic_info[src].mask);
/* There is nothing to do for ack here, ack is handled in ISR */
spin_unlock_irqrestore(&qe_ic_lock, flags);
}
static struct irq_chip qe_ic_irq_chip = {
.typename = " QEIC ",
.unmask = qe_ic_unmask_irq,
.mask = qe_ic_mask_irq,
.mask_ack = qe_ic_mask_irq_and_ack,
};
static int qe_ic_host_match(struct irq_host *h, struct device_node *node)
{
struct qe_ic *qe_ic = h->host_data;
/* Exact match, unless qe_ic node is NULL */
return qe_ic->of_node == NULL || qe_ic->of_node == node;
}
static int qe_ic_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
struct qe_ic *qe_ic = h->host_data;
struct irq_chip *chip;
if (qe_ic_info[hw].mask == 0) {
printk(KERN_ERR "Can't map reserved IRQ \n");
return -EINVAL;
}
/* Default chip */
chip = &qe_ic->hc_irq;
set_irq_chip_data(virq, qe_ic);
get_irq_desc(virq)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(virq, chip, handle_level_irq);
return 0;
}
static int qe_ic_host_xlate(struct irq_host *h, struct device_node *ct,
u32 * intspec, unsigned int intsize,
irq_hw_number_t * out_hwirq,
unsigned int *out_flags)
{
*out_hwirq = intspec[0];
if (intsize > 1)
*out_flags = intspec[1];
else
*out_flags = IRQ_TYPE_NONE;
return 0;
}
static struct irq_host_ops qe_ic_host_ops = {
.match = qe_ic_host_match,
.map = qe_ic_host_map,
.xlate = qe_ic_host_xlate,
};
/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic, struct pt_regs *regs)
{
int irq;
BUG_ON(qe_ic == NULL);
/* get the interrupt source vector. */
irq = qe_ic_read(qe_ic->regs, QEIC_CIVEC) >> 26;
if (irq == 0)
return NO_IRQ;
return irq_linear_revmap(qe_ic->irqhost, irq);
}
/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic, struct pt_regs *regs)
{
int irq;
BUG_ON(qe_ic == NULL);
/* get the interrupt source vector. */
irq = qe_ic_read(qe_ic->regs, QEIC_CHIVEC) >> 26;
if (irq == 0)
return NO_IRQ;
return irq_linear_revmap(qe_ic->irqhost, irq);
}
/* FIXME: We mask all the QE Low interrupts while handling. We should
* let other interrupt come in, but BAD interrupts are generated */
void fastcall qe_ic_cascade_low(unsigned int irq, struct irq_desc *desc,
struct pt_regs *regs)
{
struct qe_ic *qe_ic = desc->handler_data;
struct irq_chip *chip = irq_desc[irq].chip;
unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic, regs);
chip->mask_ack(irq);
if (cascade_irq != NO_IRQ)
generic_handle_irq(cascade_irq, regs);
chip->unmask(irq);
}
/* FIXME: We mask all the QE High interrupts while handling. We should
* let other interrupt come in, but BAD interrupts are generated */
void fastcall qe_ic_cascade_high(unsigned int irq, struct irq_desc *desc,
struct pt_regs *regs)
{
struct qe_ic *qe_ic = desc->handler_data;
struct irq_chip *chip = irq_desc[irq].chip;
unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic, regs);
chip->mask_ack(irq);
if (cascade_irq != NO_IRQ)
generic_handle_irq(cascade_irq, regs);
chip->unmask(irq);
}
void __init qe_ic_init(struct device_node *node, unsigned int flags)
{
struct qe_ic *qe_ic;
struct resource res;
u32 temp = 0, ret, high_active = 0;
qe_ic = alloc_bootmem(sizeof(struct qe_ic));
if (qe_ic == NULL)
return;
memset(qe_ic, 0, sizeof(struct qe_ic));
qe_ic->of_node = node ? of_node_get(node) : NULL;
qe_ic->irqhost = irq_alloc_host(IRQ_HOST_MAP_LINEAR,
NR_QE_IC_INTS, &qe_ic_host_ops, 0);
if (qe_ic->irqhost == NULL) {
of_node_put(node);
return;
}
ret = of_address_to_resource(node, 0, &res);
if (ret)
return;
qe_ic->regs = ioremap(res.start, res.end - res.start + 1);
qe_ic->irqhost->host_data = qe_ic;
qe_ic->hc_irq = qe_ic_irq_chip;
qe_ic->virq_high = irq_of_parse_and_map(node, 0);
qe_ic->virq_low = irq_of_parse_and_map(node, 1);
if (qe_ic->virq_low == NO_IRQ) {
printk(KERN_ERR "Failed to map QE_IC low IRQ\n");
return;
}
/* default priority scheme is grouped. If spread mode is */
/* required, configure cicr accordingly. */
if (flags & QE_IC_SPREADMODE_GRP_W)
temp |= CICR_GWCC;
if (flags & QE_IC_SPREADMODE_GRP_X)
temp |= CICR_GXCC;
if (flags & QE_IC_SPREADMODE_GRP_Y)
temp |= CICR_GYCC;
if (flags & QE_IC_SPREADMODE_GRP_Z)
temp |= CICR_GZCC;
if (flags & QE_IC_SPREADMODE_GRP_RISCA)
temp |= CICR_GRTA;
if (flags & QE_IC_SPREADMODE_GRP_RISCB)
temp |= CICR_GRTB;
/* choose destination signal for highest priority interrupt */
if (flags & QE_IC_HIGH_SIGNAL) {
temp |= (SIGNAL_HIGH << CICR_HPIT_SHIFT);
high_active = 1;
}
qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
set_irq_data(qe_ic->virq_low, qe_ic);
set_irq_chained_handler(qe_ic->virq_low, qe_ic_cascade_low);
if (qe_ic->virq_high != NO_IRQ) {
set_irq_data(qe_ic->virq_high, qe_ic);
set_irq_chained_handler(qe_ic->virq_high, qe_ic_cascade_high);
}
printk("QEIC (%d IRQ sources) at %p\n", NR_QE_IC_INTS, qe_ic->regs);
}
void qe_ic_set_highest_priority(unsigned int virq, int high)
{
struct qe_ic *qe_ic = qe_ic_from_irq(virq);
unsigned int src = virq_to_hw(virq);
u32 temp = 0;
temp = qe_ic_read(qe_ic->regs, QEIC_CICR);
temp &= ~CICR_HP_MASK;
temp |= src << CICR_HP_SHIFT;
temp &= ~CICR_HPIT_MASK;
temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << CICR_HPIT_SHIFT;
qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
}
/* Set Priority level within its group, from 1 to 8 */
int qe_ic_set_priority(unsigned int virq, unsigned int priority)
{
struct qe_ic *qe_ic = qe_ic_from_irq(virq);
unsigned int src = virq_to_hw(virq);
u32 temp;
if (priority > 8 || priority == 0)
return -EINVAL;
if (src > 127)
return -EINVAL;
if (qe_ic_info[src].pri_reg == 0)
return -EINVAL;
temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].pri_reg);
if (priority < 4) {
temp &= ~(0x7 << (32 - priority * 3));
temp |= qe_ic_info[src].pri_code << (32 - priority * 3);
} else {
temp &= ~(0x7 << (24 - priority * 3));
temp |= qe_ic_info[src].pri_code << (24 - priority * 3);
}
qe_ic_write(qe_ic->regs, qe_ic_info[src].pri_reg, temp);
return 0;
}
/* Set a QE priority to use high irq, only priority 1~2 can use high irq */
int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high)
{
struct qe_ic *qe_ic = qe_ic_from_irq(virq);
unsigned int src = virq_to_hw(virq);
u32 temp, control_reg = QEIC_CICNR, shift = 0;
if (priority > 2 || priority == 0)
return -EINVAL;
switch (qe_ic_info[src].pri_reg) {
case QEIC_CIPZCC:
shift = CICNR_ZCC1T_SHIFT;
break;
case QEIC_CIPWCC:
shift = CICNR_WCC1T_SHIFT;
break;
case QEIC_CIPYCC:
shift = CICNR_YCC1T_SHIFT;
break;
case QEIC_CIPXCC:
shift = CICNR_XCC1T_SHIFT;
break;
case QEIC_CIPRTA:
shift = CRICR_RTA1T_SHIFT;
control_reg = QEIC_CRICR;
break;
case QEIC_CIPRTB:
shift = CRICR_RTB1T_SHIFT;
control_reg = QEIC_CRICR;
break;
default:
return -EINVAL;
}
shift += (2 - priority) * 2;
temp = qe_ic_read(qe_ic->regs, control_reg);
temp &= ~(SIGNAL_MASK << shift);
temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << shift;
qe_ic_write(qe_ic->regs, control_reg, temp);
return 0;
}
static struct sysdev_class qe_ic_sysclass = {
set_kset_name("qe_ic"),
};
static struct sys_device device_qe_ic = {
.id = 0,
.cls = &qe_ic_sysclass,
};
static int __init init_qe_ic_sysfs(void)
{
int rc;
printk(KERN_DEBUG "Registering qe_ic with sysfs...\n");
rc = sysdev_class_register(&qe_ic_sysclass);
if (rc) {
printk(KERN_ERR "Failed registering qe_ic sys class\n");
return -ENODEV;
}
rc = sysdev_register(&device_qe_ic);
if (rc) {
printk(KERN_ERR "Failed registering qe_ic sys device\n");
return -ENODEV;
}
return 0;
}
subsys_initcall(init_qe_ic_sysfs);
arch/powerpc/sysdev/qe_lib/qe_ic.h 0 → 100644
View file @ 13bbd8d9
/*
* arch/powerpc/sysdev/qe_lib/qe_ic.h
*
* QUICC ENGINE Interrupt Controller Header
*
* Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
*
* Author: Li Yang <leoli@freescale.com>
* Based on code from Shlomi Gridish <gridish@freescale.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef _POWERPC_SYSDEV_QE_IC_H
#define _POWERPC_SYSDEV_QE_IC_H
#include <asm/qe_ic.h>
#define NR_QE_IC_INTS 64
/* QE IC registers offset */
#define QEIC_CICR 0x00
#define QEIC_CIVEC 0x04
#define QEIC_CRIPNR 0x08
#define QEIC_CIPNR 0x0c
#define QEIC_CIPXCC 0x10
#define QEIC_CIPYCC 0x14
#define QEIC_CIPWCC 0x18
#define QEIC_CIPZCC 0x1c
#define QEIC_CIMR 0x20
#define QEIC_CRIMR 0x24
#define QEIC_CICNR 0x28
#define QEIC_CIPRTA 0x30
#define QEIC_CIPRTB 0x34
#define QEIC_CRICR 0x3c
#define QEIC_CHIVEC 0x60
/* Interrupt priority registers */
#define CIPCC_SHIFT_PRI0 29
#define CIPCC_SHIFT_PRI1 26
#define CIPCC_SHIFT_PRI2 23
#define CIPCC_SHIFT_PRI3 20
#define CIPCC_SHIFT_PRI4 13
#define CIPCC_SHIFT_PRI5 10
#define CIPCC_SHIFT_PRI6 7
#define CIPCC_SHIFT_PRI7 4
/* CICR priority modes */
#define CICR_GWCC 0x00040000
#define CICR_GXCC 0x00020000
#define CICR_GYCC 0x00010000
#define CICR_GZCC 0x00080000
#define CICR_GRTA 0x00200000
#define CICR_GRTB 0x00400000
#define CICR_HPIT_SHIFT 8
#define CICR_HPIT_MASK 0x00000300
#define CICR_HP_SHIFT 24
#define CICR_HP_MASK 0x3f000000
/* CICNR */
#define CICNR_WCC1T_SHIFT 20
#define CICNR_ZCC1T_SHIFT 28
#define CICNR_YCC1T_SHIFT 12
#define CICNR_XCC1T_SHIFT 4
/* CRICR */
#define CRICR_RTA1T_SHIFT 20
#define CRICR_RTB1T_SHIFT 28
/* Signal indicator */
#define SIGNAL_MASK 3
#define SIGNAL_HIGH 2
#define SIGNAL_LOW 0
struct qe_ic {
/* Control registers offset */
volatile u32 __iomem *regs;
/* The remapper for this QEIC */
struct irq_host *irqhost;
/* The "linux" controller struct */
struct irq_chip hc_irq;
/* The device node of the interrupt controller */
struct device_node *of_node;
/* VIRQ numbers of QE high/low irqs */
unsigned int virq_high;
unsigned int virq_low;
};
/*
* QE interrupt controller internal structure
*/
struct qe_ic_info {
u32 mask; /* location of this source at the QIMR register. */
u32 mask_reg; /* Mask register offset */
u8 pri_code; /* for grouped interrupts sources - the interrupt
code as appears at the group priority register */
u32 pri_reg; /* Group priority register offset */
};
#endif /* _POWERPC_SYSDEV_QE_IC_H */
arch/powerpc/sysdev/qe_lib/qe_io.c 0 → 100644
View file @ 13bbd8d9
/*
* arch/powerpc/sysdev/qe_lib/qe_io.c
*
* QE Parallel I/O ports configuration routines
*
* Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
*
* Author: Li Yang <LeoLi@freescale.com>
* Based on code from Shlomi Gridish <gridish@freescale.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/config.h>
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/ioport.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <sysdev/fsl_soc.h>
#undef DEBUG
#define NUM_OF_PINS 32
struct port_regs {
__be32 cpodr; /* Open drain register */
__be32 cpdata; /* Data register */
__be32 cpdir1; /* Direction register */
__be32 cpdir2; /* Direction register */
__be32 cppar1; /* Pin assignment register */
__be32 cppar2; /* Pin assignment register */
};
static struct port_regs *par_io = NULL;
static int num_par_io_ports = 0;
int par_io_init(struct device_node *np)
{
struct resource res;
int ret;
const u32 *num_ports;
/* Map Parallel I/O ports registers */
ret = of_address_to_resource(np, 0, &res);
if (ret)
return ret;
par_io = ioremap(res.start, res.end - res.start + 1);
num_ports = get_property(np, "num-ports", NULL);
if (num_ports)
num_par_io_ports = *num_ports;
return 0;
}
int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
int assignment, int has_irq)
{
u32 pin_mask1bit, pin_mask2bits, new_mask2bits, tmp_val;
if (!par_io)
return -1;
/* calculate pin location for single and 2 bits information */
pin_mask1bit = (u32) (1 << (NUM_OF_PINS - (pin + 1)));
/* Set open drain, if required */
tmp_val = in_be32(&par_io[port].cpodr);
if (open_drain)
out_be32(&par_io[port].cpodr, pin_mask1bit | tmp_val);
else
out_be32(&par_io[port].cpodr, ~pin_mask1bit & tmp_val);
/* define direction */
tmp_val = (pin > (NUM_OF_PINS / 2) - 1) ?
in_be32(&par_io[port].cpdir2) :
in_be32(&par_io[port].cpdir1);
/* get all bits mask for 2 bit per port */
pin_mask2bits = (u32) (0x3 << (NUM_OF_PINS -
(pin % (NUM_OF_PINS / 2) + 1) * 2));
/* Get the final mask we need for the right definition */
new_mask2bits = (u32) (dir << (NUM_OF_PINS -
(pin % (NUM_OF_PINS / 2) + 1) * 2));
/* clear and set 2 bits mask */
if (pin > (NUM_OF_PINS / 2) - 1) {
out_be32(&par_io[port].cpdir2,
~pin_mask2bits & tmp_val);
tmp_val &= ~pin_mask2bits;
out_be32(&par_io[port].cpdir2, new_mask2bits | tmp_val);
} else {
out_be32(&par_io[port].cpdir1,
~pin_mask2bits & tmp_val);
tmp_val &= ~pin_mask2bits;
out_be32(&par_io[port].cpdir1, new_mask2bits | tmp_val);
}
/* define pin assignment */
tmp_val = (pin > (NUM_OF_PINS / 2) - 1) ?
in_be32(&par_io[port].cppar2) :
in_be32(&par_io[port].cppar1);
new_mask2bits = (u32) (assignment << (NUM_OF_PINS -
(pin % (NUM_OF_PINS / 2) + 1) * 2));
/* clear and set 2 bits mask */
if (pin > (NUM_OF_PINS / 2) - 1) {
out_be32(&par_io[port].cppar2,
~pin_mask2bits & tmp_val);
tmp_val &= ~pin_mask2bits;
out_be32(&par_io[port].cppar2, new_mask2bits | tmp_val);
} else {
out_be32(&par_io[port].cppar1,
~pin_mask2bits & tmp_val);
tmp_val &= ~pin_mask2bits;
out_be32(&par_io[port].cppar1, new_mask2bits | tmp_val);
}
return 0;
}
EXPORT_SYMBOL(par_io_config_pin);
int par_io_data_set(u8 port, u8 pin, u8 val)
{
u32 pin_mask, tmp_val;
if (port >= num_par_io_ports)
return -EINVAL;
if (pin >= NUM_OF_PINS)
return -EINVAL;
/* calculate pin location */
pin_mask = (u32) (1 << (NUM_OF_PINS - 1 - pin));
tmp_val = in_be32(&par_io[port].cpdata);
if (val == 0) /* clear */
out_be32(&par_io[port].cpdata, ~pin_mask & tmp_val);
else /* set */
out_be32(&par_io[port].cpdata, pin_mask | tmp_val);
return 0;
}
EXPORT_SYMBOL(par_io_data_set);
int par_io_of_config(struct device_node *np)
{
struct device_node *pio;
const phandle *ph;
int pio_map_len;
const unsigned int *pio_map;
if (par_io == NULL) {
printk(KERN_ERR "par_io not initialized \n");
return -1;
}
ph = get_property(np, "pio-handle", NULL);
if (ph == 0) {
printk(KERN_ERR "pio-handle not available \n");
return -1;
}
pio = of_find_node_by_phandle(*ph);
pio_map = get_property(pio, "pio-map", &pio_map_len);
if (pio_map == NULL) {
printk(KERN_ERR "pio-map is not set! \n");
return -1;
}
pio_map_len /= sizeof(unsigned int);
if ((pio_map_len % 6) != 0) {
printk(KERN_ERR "pio-map format wrong! \n");
return -1;
}
while (pio_map_len > 0) {
par_io_config_pin((u8) pio_map[0], (u8) pio_map[1],
(int) pio_map[2], (int) pio_map[3],
(int) pio_map[4], (int) pio_map[5]);
pio_map += 6;
pio_map_len -= 6;
}
of_node_put(pio);
return 0;
}
EXPORT_SYMBOL(par_io_of_config);
#ifdef DEBUG
static void dump_par_io(void)
{
int i;
printk(KERN_INFO "PAR IO registars:\n");
printk(KERN_INFO "Base address: 0x%08x\n", (u32) par_io);
for (i = 0; i < num_par_io_ports; i++) {
printk(KERN_INFO "cpodr[%d] : addr - 0x%08x, val - 0x%08x\n",
i, (u32) & par_io[i].cpodr,
in_be32(&par_io[i].cpodr));
printk(KERN_INFO "cpdata[%d]: addr - 0x%08x, val - 0x%08x\n",
i, (u32) & par_io[i].cpdata,
in_be32(&par_io[i].cpdata));
printk(KERN_INFO "cpdir1[%d]: addr - 0x%08x, val - 0x%08x\n",
i, (u32) & par_io[i].cpdir1,
in_be32(&par_io[i].cpdir1));
printk(KERN_INFO "cpdir2[%d]: addr - 0x%08x, val - 0x%08x\n",
i, (u32) & par_io[i].cpdir2,
in_be32(&par_io[i].cpdir2));
printk(KERN_INFO "cppar1[%d]: addr - 0x%08x, val - 0x%08x\n",
i, (u32) & par_io[i].cppar1,
in_be32(&par_io[i].cppar1));
printk(KERN_INFO "cppar2[%d]: addr - 0x%08x, val - 0x%08x\n",
i, (u32) & par_io[i].cppar2,
in_be32(&par_io[i].cppar2));
}
}
EXPORT_SYMBOL(dump_par_io);
#endif /* DEBUG */
arch/powerpc/sysdev/qe_lib/ucc.c 0 → 100644
View file @ 13bbd8d9
/*
* arch/powerpc/sysdev/qe_lib/ucc.c
*
* QE UCC API Set - UCC specific routines implementations.
*
* Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/stddef.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/immap_qe.h>
#include <asm/qe.h>
#include <asm/ucc.h>
static DEFINE_SPINLOCK(ucc_lock);
int ucc_set_qe_mux_mii_mng(int ucc_num)
{
unsigned long flags;
spin_lock_irqsave(&ucc_lock, flags);
out_be32(&qe_immr->qmx.cmxgcr,
((in_be32(&qe_immr->qmx.cmxgcr) &
~QE_CMXGCR_MII_ENET_MNG) |
(ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT)));
spin_unlock_irqrestore(&ucc_lock, flags);
return 0;
}
int ucc_set_type(int ucc_num, struct ucc_common *regs,
enum ucc_speed_type speed)
{
u8 guemr = 0;
/* check if the UCC number is in range. */
if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
return -EINVAL;
guemr = regs->guemr;
guemr &= ~(UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX);
switch (speed) {
case UCC_SPEED_TYPE_SLOW:
guemr |= (UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX);
break;
case UCC_SPEED_TYPE_FAST:
guemr |= (UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX);
break;
default:
return -EINVAL;
}
regs->guemr = guemr;
return 0;
}
int ucc_init_guemr(struct ucc_common *regs)
{
u8 guemr = 0;
if (!regs)
return -EINVAL;
/* Set bit 3 (which is reserved in the GUEMR register) to 1 */
guemr = UCC_GUEMR_SET_RESERVED3;
regs->guemr = guemr;
return 0;
}
static void get_cmxucr_reg(int ucc_num, volatile u32 ** p_cmxucr, u8 * reg_num,
u8 * shift)
{
switch (ucc_num) {
case 0: *p_cmxucr = &(qe_immr->qmx.cmxucr1);
*reg_num = 1;
*shift = 16;
break;
case 2: *p_cmxucr = &(qe_immr->qmx.cmxucr1);
*reg_num = 1;
*shift = 0;
break;
case 4: *p_cmxucr = &(qe_immr->qmx.cmxucr2);
*reg_num = 2;
*shift = 16;
break;
case 6: *p_cmxucr = &(qe_immr->qmx.cmxucr2);
*reg_num = 2;
*shift = 0;
break;
case 1: *p_cmxucr = &(qe_immr->qmx.cmxucr3);
*reg_num = 3;
*shift = 16;
break;
case 3: *p_cmxucr = &(qe_immr->qmx.cmxucr3);
*reg_num = 3;
*shift = 0;
break;
case 5: *p_cmxucr = &(qe_immr->qmx.cmxucr4);
*reg_num = 4;
*shift = 16;
break;
case 7: *p_cmxucr = &(qe_immr->qmx.cmxucr4);
*reg_num = 4;
*shift = 0;
break;
default:
break;
}
}
int ucc_mux_set_grant_tsa_bkpt(int ucc_num, int set, u32 mask)
{
volatile u32 *p_cmxucr;
u8 reg_num;
u8 shift;
/* check if the UCC number is in range. */
if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
return -EINVAL;
get_cmxucr_reg(ucc_num, &p_cmxucr, &reg_num, &shift);
if (set)
out_be32(p_cmxucr, in_be32(p_cmxucr) | (mask << shift));
else
out_be32(p_cmxucr, in_be32(p_cmxucr) & ~(mask << shift));
return 0;
}
int ucc_set_qe_mux_rxtx(int ucc_num, enum qe_clock clock, enum comm_dir mode)
{
volatile u32 *p_cmxucr;
u8 reg_num;
u8 shift;
u32 clock_bits;
u32 clock_mask;
int source = -1;
/* check if the UCC number is in range. */
if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
return -EINVAL;
if (!((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX))) {
printk(KERN_ERR
"ucc_set_qe_mux_rxtx: bad comm mode type passed.");
return -EINVAL;
}
get_cmxucr_reg(ucc_num, &p_cmxucr, &reg_num, &shift);
switch (reg_num) {
case 1:
switch (clock) {
case QE_BRG1: source = 1; break;
case QE_BRG2: source = 2; break;
case QE_BRG7: source = 3; break;
case QE_BRG8: source = 4; break;
case QE_CLK9: source = 5; break;
case QE_CLK10: source = 6; break;
case QE_CLK11: source = 7; break;
case QE_CLK12: source = 8; break;
case QE_CLK15: source = 9; break;
case QE_CLK16: source = 10; break;
default: source = -1; break;
}
break;
case 2:
switch (clock) {
case QE_BRG5: source = 1; break;
case QE_BRG6: source = 2; break;
case QE_BRG7: source = 3; break;
case QE_BRG8: source = 4; break;
case QE_CLK13: source = 5; break;
case QE_CLK14: source = 6; break;
case QE_CLK19: source = 7; break;
case QE_CLK20: source = 8; break;
case QE_CLK15: source = 9; break;
case QE_CLK16: source = 10; break;
default: source = -1; break;
}
break;
case 3:
switch (clock) {
case QE_BRG9: source = 1; break;
case QE_BRG10: source = 2; break;
case QE_BRG15: source = 3; break;
case QE_BRG16: source = 4; break;
case QE_CLK3: source = 5; break;
case QE_CLK4: source = 6; break;
case QE_CLK17: source = 7; break;
case QE_CLK18: source = 8; break;
case QE_CLK7: source = 9; break;
case QE_CLK8: source = 10; break;
default: source = -1; break;
}
break;
case 4:
switch (clock) {
case QE_BRG13: source = 1; break;
case QE_BRG14: source = 2; break;
case QE_BRG15: source = 3; break;
case QE_BRG16: source = 4; break;
case QE_CLK5: source = 5; break;
case QE_CLK6: source = 6; break;
case QE_CLK21: source = 7; break;
case QE_CLK22: source = 8; break;
case QE_CLK7: source = 9; break;
case QE_CLK8: source = 10; break;
default: source = -1; break;
}
break;
default:
source = -1;
break;
}
if (source == -1) {
printk(KERN_ERR
"ucc_set_qe_mux_rxtx: Bad combination of clock and UCC.");
return -ENOENT;
}
clock_bits = (u32) source;
clock_mask = QE_CMXUCR_TX_CLK_SRC_MASK;
if (mode == COMM_DIR_RX) {
clock_bits <<= 4; /* Rx field is 4 bits to left of Tx field */
clock_mask <<= 4; /* Rx field is 4 bits to left of Tx field */
}
clock_bits <<= shift;
clock_mask <<= shift;
out_be32(p_cmxucr, (in_be32(p_cmxucr) & ~clock_mask) | clock_bits);
return 0;
}
arch/powerpc/sysdev/qe_lib/ucc_fast.c 0 → 100644
View file @ 13bbd8d9
/*
* arch/powerpc/sysdev/qe_lib/ucc_fast.c
*
* QE UCC Fast API Set - UCC Fast specific routines implementations.
*
* Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/stddef.h>
#include <linux/interrupt.h>
#include <asm/io.h>
#include <asm/immap_qe.h>
#include <asm/qe.h>
#include <asm/ucc.h>
#include <asm/ucc_fast.h>
#define uccf_printk(level, format, arg...) \
printk(level format "\n", ## arg)
#define uccf_dbg(format, arg...) \
uccf_printk(KERN_DEBUG , format , ## arg)
#define uccf_err(format, arg...) \
uccf_printk(KERN_ERR , format , ## arg)
#define uccf_info(format, arg...) \
uccf_printk(KERN_INFO , format , ## arg)
#define uccf_warn(format, arg...) \
uccf_printk(KERN_WARNING , format , ## arg)
#ifdef UCCF_VERBOSE_DEBUG
#define uccf_vdbg uccf_dbg
#else
#define uccf_vdbg(fmt, args...) do { } while (0)
#endif /* UCCF_VERBOSE_DEBUG */
void ucc_fast_dump_regs(struct ucc_fast_private * uccf)
{
uccf_info("UCC%d Fast registers:", uccf->uf_info->ucc_num);
uccf_info("Base address: 0x%08x", (u32) uccf->uf_regs);
uccf_info("gumr : addr - 0x%08x, val - 0x%08x",
(u32) & uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr));
uccf_info("upsmr : addr - 0x%08x, val - 0x%08x",
(u32) & uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr));
uccf_info("utodr : addr - 0x%08x, val - 0x%04x",
(u32) & uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr));
uccf_info("udsr : addr - 0x%08x, val - 0x%04x",
(u32) & uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr));
uccf_info("ucce : addr - 0x%08x, val - 0x%08x",
(u32) & uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce));
uccf_info("uccm : addr - 0x%08x, val - 0x%08x",
(u32) & uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
uccf_info("uccs : addr - 0x%08x, val - 0x%02x",
(u32) & uccf->uf_regs->uccs, uccf->uf_regs->uccs);
uccf_info("urfb : addr - 0x%08x, val - 0x%08x",
(u32) & uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
uccf_info("urfs : addr - 0x%08x, val - 0x%04x",
(u32) & uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs));
uccf_info("urfet : addr - 0x%08x, val - 0x%04x",
(u32) & uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet));
uccf_info("urfset: addr - 0x%08x, val - 0x%04x",
(u32) & uccf->uf_regs->urfset,
in_be16(&uccf->uf_regs->urfset));
uccf_info("utfb : addr - 0x%08x, val - 0x%08x",
(u32) & uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb));
uccf_info("utfs : addr - 0x%08x, val - 0x%04x",
(u32) & uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs));
uccf_info("utfet : addr - 0x%08x, val - 0x%04x",
(u32) & uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet));
uccf_info("utftt : addr - 0x%08x, val - 0x%04x",
(u32) & uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt));
uccf_info("utpt : addr - 0x%08x, val - 0x%04x",
(u32) & uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt));
uccf_info("urtry : addr - 0x%08x, val - 0x%08x",
(u32) & uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
uccf_info("guemr : addr - 0x%08x, val - 0x%02x",
(u32) & uccf->uf_regs->guemr, uccf->uf_regs->guemr);
}
u32 ucc_fast_get_qe_cr_subblock(int uccf_num)
{
switch (uccf_num) {
case 0: return QE_CR_SUBBLOCK_UCCFAST1;
case 1: return QE_CR_SUBBLOCK_UCCFAST2;
case 2: return QE_CR_SUBBLOCK_UCCFAST3;
case 3: return QE_CR_SUBBLOCK_UCCFAST4;
case 4: return QE_CR_SUBBLOCK_UCCFAST5;
case 5: return QE_CR_SUBBLOCK_UCCFAST6;
case 6: return QE_CR_SUBBLOCK_UCCFAST7;
case 7: return QE_CR_SUBBLOCK_UCCFAST8;
default: return QE_CR_SUBBLOCK_INVALID;
}
}
void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf)
{
out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD);
}
void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode)
{
struct ucc_fast *uf_regs;
u32 gumr;
uf_regs = uccf->uf_regs;
/* Enable reception and/or transmission on this UCC. */
gumr = in_be32(&uf_regs->gumr);
if (mode & COMM_DIR_TX) {
gumr |= UCC_FAST_GUMR_ENT;
uccf->enabled_tx = 1;
}
if (mode & COMM_DIR_RX) {
gumr |= UCC_FAST_GUMR_ENR;
uccf->enabled_rx = 1;
}
out_be32(&uf_regs->gumr, gumr);
}
void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode)
{
struct ucc_fast *uf_regs;
u32 gumr;
uf_regs = uccf->uf_regs;
/* Disable reception and/or transmission on this UCC. */
gumr = in_be32(&uf_regs->gumr);
if (mode & COMM_DIR_TX) {
gumr &= ~UCC_FAST_GUMR_ENT;
uccf->enabled_tx = 0;
}
if (mode & COMM_DIR_RX) {
gumr &= ~UCC_FAST_GUMR_ENR;
uccf->enabled_rx = 0;
}
out_be32(&uf_regs->gumr, gumr);
}
int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret)
{
struct ucc_fast_private *uccf;
struct ucc_fast *uf_regs;
u32 gumr = 0;
int ret;
uccf_vdbg("%s: IN", __FUNCTION__);
if (!uf_info)
return -EINVAL;
/* check if the UCC port number is in range. */
if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
uccf_err("ucc_fast_init: Illagal UCC number!");
return -EINVAL;
}
/* Check that 'max_rx_buf_length' is properly aligned (4). */
if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) {
uccf_err("ucc_fast_init: max_rx_buf_length not aligned.");
return -EINVAL;
}
/* Validate Virtual Fifo register values */
if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) {
uccf_err
("ucc_fast_init: Virtual Fifo register urfs too small.");
return -EINVAL;
}
if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
uccf_err
("ucc_fast_init: Virtual Fifo register urfs not aligned.");
return -EINVAL;
}
if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
uccf_err
("ucc_fast_init: Virtual Fifo register urfet not aligned.");
return -EINVAL;
}
if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
uccf_err
("ucc_fast_init: Virtual Fifo register urfset not aligned.");
return -EINVAL;
}
if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
uccf_err
("ucc_fast_init: Virtual Fifo register utfs not aligned.");
return -EINVAL;
}
if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
uccf_err
("ucc_fast_init: Virtual Fifo register utfet not aligned.");
return -EINVAL;
}
if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
uccf_err
("ucc_fast_init: Virtual Fifo register utftt not aligned.");
return -EINVAL;
}
uccf = (struct ucc_fast_private *)
kmalloc(sizeof(struct ucc_fast_private), GFP_KERNEL);
if (!uccf) {
uccf_err
("ucc_fast_init: No memory for UCC slow data structure!");
return -ENOMEM;
}
memset(uccf, 0, sizeof(struct ucc_fast_private));
/* Fill fast UCC structure */
uccf->uf_info = uf_info;
/* Set the PHY base address */
uccf->uf_regs =
(struct ucc_fast *) ioremap(uf_info->regs, sizeof(struct ucc_fast));
if (uccf->uf_regs == NULL) {
uccf_err
("ucc_fast_init: No memory map for UCC slow controller!");
return -ENOMEM;
}
uccf->enabled_tx = 0;
uccf->enabled_rx = 0;
uccf->stopped_tx = 0;
uccf->stopped_rx = 0;
uf_regs = uccf->uf_regs;
uccf->p_ucce = (u32 *) & (uf_regs->ucce);
uccf->p_uccm = (u32 *) & (uf_regs->uccm);
#ifdef STATISTICS
uccf->tx_frames = 0;
uccf->rx_frames = 0;
uccf->rx_discarded = 0;
#endif /* STATISTICS */
/* Init Guemr register */
if ((ret = ucc_init_guemr((struct ucc_common *) (uf_regs)))) {
uccf_err("ucc_fast_init: Could not init the guemr register.");
ucc_fast_free(uccf);
return ret;
}
/* Set UCC to fast type */
if ((ret = ucc_set_type(uf_info->ucc_num,
(struct ucc_common *) (uf_regs),
UCC_SPEED_TYPE_FAST))) {
uccf_err("ucc_fast_init: Could not set type to fast.");
ucc_fast_free(uccf);
return ret;
}
uccf->mrblr = uf_info->max_rx_buf_length;
/* Set GUMR */
/* For more details see the hardware spec. */
/* gumr starts as zero. */
if (uf_info->tci)
gumr |= UCC_FAST_GUMR_TCI;
gumr |= uf_info->ttx_trx;
if (uf_info->cdp)
gumr |= UCC_FAST_GUMR_CDP;
if (uf_info->ctsp)
gumr |= UCC_FAST_GUMR_CTSP;
if (uf_info->cds)
gumr |= UCC_FAST_GUMR_CDS;
if (uf_info->ctss)
gumr |= UCC_FAST_GUMR_CTSS;
if (uf_info->txsy)
gumr |= UCC_FAST_GUMR_TXSY;
if (uf_info->rsyn)
gumr |= UCC_FAST_GUMR_RSYN;
gumr |= uf_info->synl;
if (uf_info->rtsm)
gumr |= UCC_FAST_GUMR_RTSM;
gumr |= uf_info->renc;
if (uf_info->revd)
gumr |= UCC_FAST_GUMR_REVD;
gumr |= uf_info->tenc;
gumr |= uf_info->tcrc;
gumr |= uf_info->mode;
out_be32(&uf_regs->gumr, gumr);
/* Allocate memory for Tx Virtual Fifo */
uccf->ucc_fast_tx_virtual_fifo_base_offset =
qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
if (IS_MURAM_ERR(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
uccf_err
("ucc_fast_init: Can not allocate MURAM memory for "
"struct ucc_fastx_virtual_fifo_base_offset.");
uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
ucc_fast_free(uccf);
return -ENOMEM;
}
/* Allocate memory for Rx Virtual Fifo */
uccf->ucc_fast_rx_virtual_fifo_base_offset =
qe_muram_alloc(uf_info->urfs +
(u32)
UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR,
UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
if (IS_MURAM_ERR(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
uccf_err
("ucc_fast_init: Can not allocate MURAM memory for "
"ucc_fast_rx_virtual_fifo_base_offset.");
uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
ucc_fast_free(uccf);
return -ENOMEM;
}
/* Set Virtual Fifo registers */
out_be16(&uf_regs->urfs, uf_info->urfs);
out_be16(&uf_regs->urfet, uf_info->urfet);
out_be16(&uf_regs->urfset, uf_info->urfset);
out_be16(&uf_regs->utfs, uf_info->utfs);
out_be16(&uf_regs->utfet, uf_info->utfet);
out_be16(&uf_regs->utftt, uf_info->utftt);
/* utfb, urfb are offsets from MURAM base */
out_be32(&uf_regs->utfb, uccf->ucc_fast_tx_virtual_fifo_base_offset);
out_be32(&uf_regs->urfb, uccf->ucc_fast_rx_virtual_fifo_base_offset);
/* Mux clocking */
/* Grant Support */
ucc_set_qe_mux_grant(uf_info->ucc_num, uf_info->grant_support);
/* Breakpoint Support */
ucc_set_qe_mux_bkpt(uf_info->ucc_num, uf_info->brkpt_support);
/* Set Tsa or NMSI mode. */
ucc_set_qe_mux_tsa(uf_info->ucc_num, uf_info->tsa);
/* If NMSI (not Tsa), set Tx and Rx clock. */
if (!uf_info->tsa) {
/* Rx clock routing */
if (uf_info->rx_clock != QE_CLK_NONE) {
if (ucc_set_qe_mux_rxtx
(uf_info->ucc_num, uf_info->rx_clock,
COMM_DIR_RX)) {
uccf_err
("ucc_fast_init: Illegal value for parameter 'RxClock'.");
ucc_fast_free(uccf);
return -EINVAL;
}
}
/* Tx clock routing */
if (uf_info->tx_clock != QE_CLK_NONE) {
if (ucc_set_qe_mux_rxtx
(uf_info->ucc_num, uf_info->tx_clock,
COMM_DIR_TX)) {
uccf_err
("ucc_fast_init: Illegal value for parameter 'TxClock'.");
ucc_fast_free(uccf);
return -EINVAL;
}
}
}
/* Set interrupt mask register at UCC level. */
out_be32(&uf_regs->uccm, uf_info->uccm_mask);
/* First, clear anything pending at UCC level,
* otherwise, old garbage may come through
* as soon as the dam is opened
* Writing '1' clears
*/
out_be32(&uf_regs->ucce, 0xffffffff);
*uccf_ret = uccf;
return 0;
}
void ucc_fast_free(struct ucc_fast_private * uccf)
{
if (!uccf)
return;
if (uccf->ucc_fast_tx_virtual_fifo_base_offset)
qe_muram_free(uccf->ucc_fast_tx_virtual_fifo_base_offset);
if (uccf->ucc_fast_rx_virtual_fifo_base_offset)
qe_muram_free(uccf->ucc_fast_rx_virtual_fifo_base_offset);
kfree(uccf);
}
arch/powerpc/sysdev/qe_lib/ucc_slow.c 0 → 100644
View file @ 13bbd8d9
/*
* Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
*
* Description:
* QE UCC Slow API Set - UCC Slow specific routines implementations.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/stddef.h>
#include <linux/interrupt.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/immap_qe.h>
#include <asm/qe.h>
#include <asm/ucc.h>
#include <asm/ucc_slow.h>
#define uccs_printk(level, format, arg...) \
printk(level format "\n", ## arg)
#define uccs_dbg(format, arg...) \
uccs_printk(KERN_DEBUG , format , ## arg)
#define uccs_err(format, arg...) \
uccs_printk(KERN_ERR , format , ## arg)
#define uccs_info(format, arg...) \
uccs_printk(KERN_INFO , format , ## arg)
#define uccs_warn(format, arg...) \
uccs_printk(KERN_WARNING , format , ## arg)
#ifdef UCCS_VERBOSE_DEBUG
#define uccs_vdbg uccs_dbg
#else
#define uccs_vdbg(fmt, args...) do { } while (0)
#endif /* UCCS_VERBOSE_DEBUG */
u32 ucc_slow_get_qe_cr_subblock(int uccs_num)
{
switch (uccs_num) {
case 0: return QE_CR_SUBBLOCK_UCCSLOW1;
case 1: return QE_CR_SUBBLOCK_UCCSLOW2;
case 2: return QE_CR_SUBBLOCK_UCCSLOW3;
case 3: return QE_CR_SUBBLOCK_UCCSLOW4;
case 4: return QE_CR_SUBBLOCK_UCCSLOW5;
case 5: return QE_CR_SUBBLOCK_UCCSLOW6;
case 6: return QE_CR_SUBBLOCK_UCCSLOW7;
case 7: return QE_CR_SUBBLOCK_UCCSLOW8;
default: return QE_CR_SUBBLOCK_INVALID;
}
}
void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs)
{
out_be16(&uccs->us_regs->utodr, UCC_SLOW_TOD);
}
void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs)
{
struct ucc_slow_info *us_info = uccs->us_info;
u32 id;
id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
qe_issue_cmd(QE_GRACEFUL_STOP_TX, id,
QE_CR_PROTOCOL_UNSPECIFIED, 0);
}
void ucc_slow_stop_tx(struct ucc_slow_private * uccs)
{
struct ucc_slow_info *us_info = uccs->us_info;
u32 id;
id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
qe_issue_cmd(QE_STOP_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
}
void ucc_slow_restart_tx(struct ucc_slow_private * uccs)
{
struct ucc_slow_info *us_info = uccs->us_info;
u32 id;
id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
qe_issue_cmd(QE_RESTART_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
}
void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode)
{
struct ucc_slow *us_regs;
u32 gumr_l;
us_regs = uccs->us_regs;
/* Enable reception and/or transmission on this UCC. */
gumr_l = in_be32(&us_regs->gumr_l);
if (mode & COMM_DIR_TX) {
gumr_l |= UCC_SLOW_GUMR_L_ENT;
uccs->enabled_tx = 1;
}
if (mode & COMM_DIR_RX) {
gumr_l |= UCC_SLOW_GUMR_L_ENR;
uccs->enabled_rx = 1;
}
out_be32(&us_regs->gumr_l, gumr_l);
}
void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode)
{
struct ucc_slow *us_regs;
u32 gumr_l;
us_regs = uccs->us_regs;
/* Disable reception and/or transmission on this UCC. */
gumr_l = in_be32(&us_regs->gumr_l);
if (mode & COMM_DIR_TX) {
gumr_l &= ~UCC_SLOW_GUMR_L_ENT;
uccs->enabled_tx = 0;
}
if (mode & COMM_DIR_RX) {
gumr_l &= ~UCC_SLOW_GUMR_L_ENR;
uccs->enabled_rx = 0;
}
out_be32(&us_regs->gumr_l, gumr_l);
}
int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret)
{
u32 i;
struct ucc_slow *us_regs;
u32 gumr;
u8 function_code = 0;
u8 *bd;
struct ucc_slow_private *uccs;
u32 id;
u32 command;
int ret;
uccs_vdbg("%s: IN", __FUNCTION__);
if (!us_info)
return -EINVAL;
/* check if the UCC port number is in range. */
if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) {
uccs_err("ucc_slow_init: Illagal UCC number!");
return -EINVAL;
}
/*
* Set mrblr
* Check that 'max_rx_buf_length' is properly aligned (4), unless
* rfw is 1, meaning that QE accepts one byte at a time, unlike normal
* case when QE accepts 32 bits at a time.
*/
if ((!us_info->rfw) &&
(us_info->max_rx_buf_length & (UCC_SLOW_MRBLR_ALIGNMENT - 1))) {
uccs_err("max_rx_buf_length not aligned.");
return -EINVAL;
}
uccs = (struct ucc_slow_private *)
kmalloc(sizeof(struct ucc_slow_private), GFP_KERNEL);
if (!uccs) {
uccs_err
("ucc_slow_init: No memory for UCC slow data structure!");
return -ENOMEM;
}
memset(uccs, 0, sizeof(struct ucc_slow_private));
/* Fill slow UCC structure */
uccs->us_info = us_info;
uccs->saved_uccm = 0;
uccs->p_rx_frame = 0;
uccs->us_regs = us_info->us_regs;
us_regs = uccs->us_regs;
uccs->p_ucce = (u16 *) & (us_regs->ucce);
uccs->p_uccm = (u16 *) & (us_regs->uccm);
#ifdef STATISTICS
uccs->rx_frames = 0;
uccs->tx_frames = 0;
uccs->rx_discarded = 0;
#endif /* STATISTICS */
/* Get PRAM base */
uccs->us_pram_offset = qe_muram_alloc(UCC_SLOW_PRAM_SIZE,
ALIGNMENT_OF_UCC_SLOW_PRAM);
if (IS_MURAM_ERR(uccs->us_pram_offset)) {
uccs_err
("ucc_slow_init: Can not allocate MURAM memory "
"for Slow UCC.");
ucc_slow_free(uccs);
return -ENOMEM;
}
id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, QE_CR_PROTOCOL_UNSPECIFIED,
(u32) uccs->us_pram_offset);
uccs->us_pram = qe_muram_addr(uccs->us_pram_offset);
/* Init Guemr register */
if ((ret = ucc_init_guemr((struct ucc_common *) (us_info->us_regs)))) {
uccs_err("ucc_slow_init: Could not init the guemr register.");
ucc_slow_free(uccs);
return ret;
}
/* Set UCC to slow type */
if ((ret = ucc_set_type(us_info->ucc_num,
(struct ucc_common *) (us_info->us_regs),
UCC_SPEED_TYPE_SLOW))) {
uccs_err("ucc_slow_init: Could not init the guemr register.");
ucc_slow_free(uccs);
return ret;
}
out_be16(&uccs->us_pram->mrblr, us_info->max_rx_buf_length);
INIT_LIST_HEAD(&uccs->confQ);
/* Allocate BDs. */
uccs->rx_base_offset =
qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd),
QE_ALIGNMENT_OF_BD);
if (IS_MURAM_ERR(uccs->rx_base_offset)) {
uccs_err("ucc_slow_init: No memory for Rx BD's.");
uccs->rx_base_offset = 0;
ucc_slow_free(uccs);
return -ENOMEM;
}
uccs->tx_base_offset =
qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd),
QE_ALIGNMENT_OF_BD);
if (IS_MURAM_ERR(uccs->tx_base_offset)) {
uccs_err("ucc_slow_init: No memory for Tx BD's.");
uccs->tx_base_offset = 0;
ucc_slow_free(uccs);
return -ENOMEM;
}
/* Init Tx bds */
bd = uccs->confBd = uccs->tx_bd = qe_muram_addr(uccs->tx_base_offset);
for (i = 0; i < us_info->tx_bd_ring_len; i++) {
/* clear bd buffer */
out_be32(&(((struct qe_bd *)bd)->buf), 0);
/* set bd status and length */
out_be32((u32*)bd, 0);
bd += sizeof(struct qe_bd);
}
bd -= sizeof(struct qe_bd);
/* set bd status and length */
out_be32((u32*)bd, T_W); /* for last BD set Wrap bit */
/* Init Rx bds */
bd = uccs->rx_bd = qe_muram_addr(uccs->rx_base_offset);
for (i = 0; i < us_info->rx_bd_ring_len; i++) {
/* set bd status and length */
out_be32((u32*)bd, 0);
/* clear bd buffer */
out_be32(&(((struct qe_bd *)bd)->buf), 0);
bd += sizeof(struct qe_bd);
}
bd -= sizeof(struct qe_bd);
/* set bd status and length */
out_be32((u32*)bd, R_W); /* for last BD set Wrap bit */
/* Set GUMR (For more details see the hardware spec.). */
/* gumr_h */
gumr = 0;
gumr |= us_info->tcrc;
if (us_info->cdp)
gumr |= UCC_SLOW_GUMR_H_CDP;
if (us_info->ctsp)
gumr |= UCC_SLOW_GUMR_H_CTSP;
if (us_info->cds)
gumr |= UCC_SLOW_GUMR_H_CDS;
if (us_info->ctss)
gumr |= UCC_SLOW_GUMR_H_CTSS;
if (us_info->tfl)
gumr |= UCC_SLOW_GUMR_H_TFL;
if (us_info->rfw)
gumr |= UCC_SLOW_GUMR_H_RFW;
if (us_info->txsy)
gumr |= UCC_SLOW_GUMR_H_TXSY;
if (us_info->rtsm)
gumr |= UCC_SLOW_GUMR_H_RTSM;
out_be32(&us_regs->gumr_h, gumr);
/* gumr_l */
gumr = 0;
if (us_info->tci)
gumr |= UCC_SLOW_GUMR_L_TCI;
if (us_info->rinv)
gumr |= UCC_SLOW_GUMR_L_RINV;
if (us_info->tinv)
gumr |= UCC_SLOW_GUMR_L_TINV;
if (us_info->tend)
gumr |= UCC_SLOW_GUMR_L_TEND;
gumr |= us_info->tdcr;
gumr |= us_info->rdcr;
gumr |= us_info->tenc;
gumr |= us_info->renc;
gumr |= us_info->diag;
gumr |= us_info->mode;
out_be32(&us_regs->gumr_l, gumr);
/* Function code registers */
/* function_code has initial value 0 */
/* if the data is in cachable memory, the 'global' */
/* in the function code should be set. */
function_code |= us_info->data_mem_part;
function_code |= QE_BMR_BYTE_ORDER_BO_MOT; /* Required for QE */
uccs->us_pram->tfcr = function_code;
uccs->us_pram->rfcr = function_code;
/* rbase, tbase are offsets from MURAM base */
out_be16(&uccs->us_pram->rbase, uccs->us_pram_offset);
out_be16(&uccs->us_pram->tbase, uccs->us_pram_offset);
/* Mux clocking */
/* Grant Support */
ucc_set_qe_mux_grant(us_info->ucc_num, us_info->grant_support);
/* Breakpoint Support */
ucc_set_qe_mux_bkpt(us_info->ucc_num, us_info->brkpt_support);
/* Set Tsa or NMSI mode. */
ucc_set_qe_mux_tsa(us_info->ucc_num, us_info->tsa);
/* If NMSI (not Tsa), set Tx and Rx clock. */
if (!us_info->tsa) {
/* Rx clock routing */
if (ucc_set_qe_mux_rxtx
(us_info->ucc_num, us_info->rx_clock, COMM_DIR_RX)) {
uccs_err
("ucc_slow_init: Illegal value for parameter"
" 'RxClock'.");
ucc_slow_free(uccs);
return -EINVAL;
}
/* Tx clock routing */
if (ucc_set_qe_mux_rxtx(us_info->ucc_num,
us_info->tx_clock, COMM_DIR_TX)) {
uccs_err
("ucc_slow_init: Illegal value for parameter "
"'TxClock'.");
ucc_slow_free(uccs);
return -EINVAL;
}
}
/*
* INTERRUPTS
*/
/* Set interrupt mask register at UCC level. */
out_be16(&us_regs->uccm, us_info->uccm_mask);
/* First, clear anything pending at UCC level, */
/* otherwise, old garbage may come through */
/* as soon as the dam is opened. */
/* Writing '1' clears */
out_be16(&us_regs->ucce, 0xffff);
/* Issue QE Init command */
if (us_info->init_tx && us_info->init_rx)
command = QE_INIT_TX_RX;
else if (us_info->init_tx)
command = QE_INIT_TX;
else
command = QE_INIT_RX; /* We know at least one is TRUE */
id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
qe_issue_cmd(command, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
*uccs_ret = uccs;
return 0;
}
void ucc_slow_free(struct ucc_slow_private * uccs)
{
if (!uccs)
return;
if (uccs->rx_base_offset)
qe_muram_free(uccs->rx_base_offset);
if (uccs->tx_base_offset)
qe_muram_free(uccs->tx_base_offset);
if (uccs->us_pram) {
qe_muram_free(uccs->us_pram_offset);
uccs->us_pram = NULL;
}
kfree(uccs);
}
arch/powerpc/xmon/xmon.c
View file @ 13bbd8d9
......@@ -2,6 +2,8 @@
* Routines providing a simple monitor for use on the PowerMac.
*
* Copyright (C) 1996-2005 Paul Mackerras.
* Copyright (C) 2001 PPC64 Team, IBM Corp
* Copyrignt (C) 2006 Michael Ellerman, IBM Corp
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
......@@ -503,7 +505,7 @@ static int xmon_core(struct pt_regs *regs, int fromipi)
mtmsr(msr); /* restore interrupt enable */
return cmd != 'X';
return cmd != 'X' && cmd != EOF;
}
int xmon(struct pt_regs *excp)
......@@ -2597,3 +2599,34 @@ static int __init setup_xmon_sysrq(void)
}
__initcall(setup_xmon_sysrq);
#endif /* CONFIG_MAGIC_SYSRQ */
int __initdata xmon_early, xmon_off;
static int __init early_parse_xmon(char *p)
{
if (!p || strncmp(p, "early", 5) == 0) {
/* just "xmon" is equivalent to "xmon=early" */
xmon_init(1);
xmon_early = 1;
} else if (strncmp(p, "on", 2) == 0)
xmon_init(1);
else if (strncmp(p, "off", 3) == 0)
xmon_off = 1;
else if (strncmp(p, "nobt", 4) == 0)
xmon_no_auto_backtrace = 1;
else
return 1;
return 0;
}
early_param("xmon", early_parse_xmon);
void __init xmon_setup(void)
{
#ifdef CONFIG_XMON_DEFAULT
if (!xmon_off)
xmon_init(1);
#endif
if (xmon_early)
debugger(NULL);
}
drivers/block/swim3.c
View file @ 13bbd8d9
......@@ -636,7 +636,7 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id, struct pt_regs *regs)
intr = in_8(&sw->intr);
err = (intr & ERROR_INTR)? in_8(&sw->error): 0;
if ((intr & ERROR_INTR) && fs->state != do_transfer)
printk(KERN_ERR "swim3_interrupt, state=%d, dir=%lx, intr=%x, err=%x\n",
printk(KERN_ERR "swim3_interrupt, state=%d, dir=%x, intr=%x, err=%x\n",
fs->state, rq_data_dir(fd_req), intr, err);
switch (fs->state) {
case locating:
......@@ -742,7 +742,7 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id, struct pt_regs *regs)
if ((stat & ACTIVE) == 0 || resid != 0) {
/* musta been an error */
printk(KERN_ERR "swim3: fd dma: stat=%x resid=%d\n", stat, resid);
printk(KERN_ERR " state=%d, dir=%lx, intr=%x, err=%x\n",
printk(KERN_ERR " state=%d, dir=%x, intr=%x, err=%x\n",
fs->state, rq_data_dir(fd_req), intr, err);
end_request(fd_req, 0);
fs->state = idle;
......
drivers/char/hvc_iseries.c
View file @ 13bbd8d9
......@@ -29,6 +29,7 @@
#include <asm/hvconsole.h>
#include <asm/vio.h>
#include <asm/prom.h>
#include <asm/firmware.h>
#include <asm/iseries/vio.h>
#include <asm/iseries/hv_call.h>
#include <asm/iseries/hv_lp_config.h>
......@@ -488,6 +489,9 @@ static int hvc_vio_init(void)
atomic_t wait_flag;
int rc;
if (!firmware_has_feature(FW_FEATURE_ISERIES))
return -EIO;
/* +2 for fudge */
rc = viopath_open(HvLpConfig_getPrimaryLpIndex(),
viomajorsubtype_chario, VIOCHAR_WINDOW + 2);
......@@ -562,7 +566,7 @@ static int hvc_find_vtys(void)
for (vty = of_find_node_by_name(NULL, "vty"); vty != NULL;
vty = of_find_node_by_name(vty, "vty")) {
uint32_t *vtermno;
const uint32_t *vtermno;
/* We have statically defined space for only a certain number
* of console adapters.
......@@ -571,7 +575,7 @@ static int hvc_find_vtys(void)
(num_found >= VTTY_PORTS))
break;
vtermno = (uint32_t *)get_property(vty, "reg", NULL);
vtermno = get_property(vty, "reg", NULL);
if (!vtermno)
continue;
......
drivers/char/hvc_vio.c
View file @ 13bbd8d9
......@@ -35,6 +35,7 @@
#include <asm/hvconsole.h>
#include <asm/vio.h>
#include <asm/prom.h>
#include <asm/firmware.h>
#include "hvc_console.h"
......@@ -120,6 +121,9 @@ static int hvc_vio_init(void)
{
int rc;
if (firmware_has_feature(FW_FEATURE_ISERIES))
return -EIO;
/* Register as a vio device to receive callbacks */
rc = vio_register_driver(&hvc_vio_driver);
......
include/asm-powerpc/firmware.h
View file @ 13bbd8d9
......@@ -14,34 +14,36 @@
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
#include <asm/asm-compat.h>
/* firmware feature bitmask values */
#define FIRMWARE_MAX_FEATURES 63
#define FW_FEATURE_PFT (1UL<<0)
#define FW_FEATURE_TCE (1UL<<1)
#define FW_FEATURE_SPRG0 (1UL<<2)
#define FW_FEATURE_DABR (1UL<<3)
#define FW_FEATURE_COPY (1UL<<4)
#define FW_FEATURE_ASR (1UL<<5)
#define FW_FEATURE_DEBUG (1UL<<6)
#define FW_FEATURE_TERM (1UL<<7)
#define FW_FEATURE_PERF (1UL<<8)
#define FW_FEATURE_DUMP (1UL<<9)
#define FW_FEATURE_INTERRUPT (1UL<<10)
#define FW_FEATURE_MIGRATE (1UL<<11)
#define FW_FEATURE_PERFMON (1UL<<12)
#define FW_FEATURE_CRQ (1UL<<13)
#define FW_FEATURE_VIO (1UL<<14)
#define FW_FEATURE_RDMA (1UL<<15)
#define FW_FEATURE_LLAN (1UL<<16)
#define FW_FEATURE_BULK (1UL<<17)
#define FW_FEATURE_XDABR (1UL<<18)
#define FW_FEATURE_MULTITCE (1UL<<19)
#define FW_FEATURE_SPLPAR (1UL<<20)
#define FW_FEATURE_ISERIES (1UL<<21)
#define FW_FEATURE_LPAR (1UL<<22)
#define FW_FEATURE_PFT ASM_CONST(0x0000000000000001)
#define FW_FEATURE_TCE ASM_CONST(0x0000000000000002)
#define FW_FEATURE_SPRG0 ASM_CONST(0x0000000000000004)
#define FW_FEATURE_DABR ASM_CONST(0x0000000000000008)
#define FW_FEATURE_COPY ASM_CONST(0x0000000000000010)
#define FW_FEATURE_ASR ASM_CONST(0x0000000000000020)
#define FW_FEATURE_DEBUG ASM_CONST(0x0000000000000040)
#define FW_FEATURE_TERM ASM_CONST(0x0000000000000080)
#define FW_FEATURE_PERF ASM_CONST(0x0000000000000100)
#define FW_FEATURE_DUMP ASM_CONST(0x0000000000000200)
#define FW_FEATURE_INTERRUPT ASM_CONST(0x0000000000000400)
#define FW_FEATURE_MIGRATE ASM_CONST(0x0000000000000800)
#define FW_FEATURE_PERFMON ASM_CONST(0x0000000000001000)
#define FW_FEATURE_CRQ ASM_CONST(0x0000000000002000)
#define FW_FEATURE_VIO ASM_CONST(0x0000000000004000)
#define FW_FEATURE_RDMA ASM_CONST(0x0000000000008000)
#define FW_FEATURE_LLAN ASM_CONST(0x0000000000010000)
#define FW_FEATURE_BULK ASM_CONST(0x0000000000020000)
#define FW_FEATURE_XDABR ASM_CONST(0x0000000000040000)
#define FW_FEATURE_MULTITCE ASM_CONST(0x0000000000080000)
#define FW_FEATURE_SPLPAR ASM_CONST(0x0000000000100000)
#define FW_FEATURE_ISERIES ASM_CONST(0x0000000000200000)
#define FW_FEATURE_LPAR ASM_CONST(0x0000000000400000)
#ifndef __ASSEMBLY__
enum {
#ifdef CONFIG_PPC64
......@@ -94,6 +96,23 @@ extern void machine_check_fwnmi(void);
/* This is true if we are using the firmware NMI handler (typically LPAR) */
extern int fwnmi_active;
#else /* __ASSEMBLY__ */
#define BEGIN_FW_FTR_SECTION 96:
#define END_FW_FTR_SECTION(msk, val) \
97: \
.section __fw_ftr_fixup,"a"; \
.align 3; \
.llong msk; \
.llong val; \
.llong 96b; \
.llong 97b; \
.previous
#define END_FW_FTR_SECTION_IFSET(msk) END_FW_FTR_SECTION((msk), (msk))
#define END_FW_FTR_SECTION_IFCLR(msk) END_FW_FTR_SECTION((msk), 0)
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* __ASM_POWERPC_FIRMWARE_H */
include/asm-powerpc/immap_qe.h 0 → 100644
View file @ 13bbd8d9
/*
* include/asm-powerpc/immap_qe.h
*
* QUICC Engine (QE) Internal Memory Map.
* The Internal Memory Map for devices with QE on them. This
* is the superset of all QE devices (8360, etc.).
* Copyright (C) 2006. Freescale Semicondutor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef _ASM_POWERPC_IMMAP_QE_H
#define _ASM_POWERPC_IMMAP_QE_H
#ifdef __KERNEL__
#include <linux/kernel.h>
#define QE_IMMAP_SIZE (1024 * 1024) /* 1MB from 1MB+IMMR */
/* QE I-RAM */
struct qe_iram {
__be32 iadd; /* I-RAM Address Register */
__be32 idata; /* I-RAM Data Register */
u8 res0[0x78];
} __attribute__ ((packed));
/* QE Interrupt Controller */
struct qe_ic_regs {
__be32 qicr;
__be32 qivec;
__be32 qripnr;
__be32 qipnr;
__be32 qipxcc;
__be32 qipycc;
__be32 qipwcc;
__be32 qipzcc;
__be32 qimr;
__be32 qrimr;
__be32 qicnr;
u8 res0[0x4];
__be32 qiprta;
__be32 qiprtb;
u8 res1[0x4];
__be32 qricr;
u8 res2[0x20];
__be32 qhivec;
u8 res3[0x1C];
} __attribute__ ((packed));
/* Communications Processor */
struct cp_qe {
__be32 cecr; /* QE command register */
__be32 ceccr; /* QE controller configuration register */
__be32 cecdr; /* QE command data register */
u8 res0[0xA];
__be16 ceter; /* QE timer event register */
u8 res1[0x2];
__be16 cetmr; /* QE timers mask register */
__be32 cetscr; /* QE time-stamp timer control register */
__be32 cetsr1; /* QE time-stamp register 1 */
__be32 cetsr2; /* QE time-stamp register 2 */
u8 res2[0x8];
__be32 cevter; /* QE virtual tasks event register */
__be32 cevtmr; /* QE virtual tasks mask register */
__be16 cercr; /* QE RAM control register */
u8 res3[0x2];
u8 res4[0x24];
__be16 ceexe1; /* QE external request 1 event register */
u8 res5[0x2];
__be16 ceexm1; /* QE external request 1 mask register */
u8 res6[0x2];
__be16 ceexe2; /* QE external request 2 event register */
u8 res7[0x2];
__be16 ceexm2; /* QE external request 2 mask register */
u8 res8[0x2];
__be16 ceexe3; /* QE external request 3 event register */
u8 res9[0x2];
__be16 ceexm3; /* QE external request 3 mask register */
u8 res10[0x2];
__be16 ceexe4; /* QE external request 4 event register */
u8 res11[0x2];
__be16 ceexm4; /* QE external request 4 mask register */
u8 res12[0x2];
u8 res13[0x280];
} __attribute__ ((packed));
/* QE Multiplexer */
struct qe_mux {
__be32 cmxgcr; /* CMX general clock route register */
__be32 cmxsi1cr_l; /* CMX SI1 clock route low register */
__be32 cmxsi1cr_h; /* CMX SI1 clock route high register */
__be32 cmxsi1syr; /* CMX SI1 SYNC route register */
__be32 cmxucr1; /* CMX UCC1, UCC3 clock route register */
__be32 cmxucr2; /* CMX UCC5, UCC7 clock route register */
__be32 cmxucr3; /* CMX UCC2, UCC4 clock route register */
__be32 cmxucr4; /* CMX UCC6, UCC8 clock route register */
__be32 cmxupcr; /* CMX UPC clock route register */
u8 res0[0x1C];
} __attribute__ ((packed));
/* QE Timers */
struct qe_timers {
u8 gtcfr1; /* Timer 1 and Timer 2 global config register*/
u8 res0[0x3];
u8 gtcfr2; /* Timer 3 and timer 4 global config register*/
u8 res1[0xB];
__be16 gtmdr1; /* Timer 1 mode register */
__be16 gtmdr2; /* Timer 2 mode register */
__be16 gtrfr1; /* Timer 1 reference register */
__be16 gtrfr2; /* Timer 2 reference register */
__be16 gtcpr1; /* Timer 1 capture register */
__be16 gtcpr2; /* Timer 2 capture register */
__be16 gtcnr1; /* Timer 1 counter */
__be16 gtcnr2; /* Timer 2 counter */
__be16 gtmdr3; /* Timer 3 mode register */
__be16 gtmdr4; /* Timer 4 mode register */
__be16 gtrfr3; /* Timer 3 reference register */
__be16 gtrfr4; /* Timer 4 reference register */
__be16 gtcpr3; /* Timer 3 capture register */
__be16 gtcpr4; /* Timer 4 capture register */
__be16 gtcnr3; /* Timer 3 counter */
__be16 gtcnr4; /* Timer 4 counter */
__be16 gtevr1; /* Timer 1 event register */
__be16 gtevr2; /* Timer 2 event register */
__be16 gtevr3; /* Timer 3 event register */
__be16 gtevr4; /* Timer 4 event register */
__be16 gtps; /* Timer 1 prescale register */
u8 res2[0x46];
} __attribute__ ((packed));
/* BRG */
struct qe_brg {
__be32 brgc1; /* BRG1 configuration register */
__be32 brgc2; /* BRG2 configuration register */
__be32 brgc3; /* BRG3 configuration register */
__be32 brgc4; /* BRG4 configuration register */
__be32 brgc5; /* BRG5 configuration register */
__be32 brgc6; /* BRG6 configuration register */
__be32 brgc7; /* BRG7 configuration register */
__be32 brgc8; /* BRG8 configuration register */
__be32 brgc9; /* BRG9 configuration register */
__be32 brgc10; /* BRG10 configuration register */
__be32 brgc11; /* BRG11 configuration register */
__be32 brgc12; /* BRG12 configuration register */
__be32 brgc13; /* BRG13 configuration register */
__be32 brgc14; /* BRG14 configuration register */
__be32 brgc15; /* BRG15 configuration register */
__be32 brgc16; /* BRG16 configuration register */
u8 res0[0x40];
} __attribute__ ((packed));
/* SPI */
struct spi {
u8 res0[0x20];
__be32 spmode; /* SPI mode register */
u8 res1[0x2];
u8 spie; /* SPI event register */
u8 res2[0x1];
u8 res3[0x2];
u8 spim; /* SPI mask register */
u8 res4[0x1];
u8 res5[0x1];
u8 spcom; /* SPI command register */
u8 res6[0x2];
__be32 spitd; /* SPI transmit data register (cpu mode) */
__be32 spird; /* SPI receive data register (cpu mode) */
u8 res7[0x8];
} __attribute__ ((packed));
/* SI */
struct si1 {
__be16 siamr1; /* SI1 TDMA mode register */
__be16 sibmr1; /* SI1 TDMB mode register */
__be16 sicmr1; /* SI1 TDMC mode register */
__be16 sidmr1; /* SI1 TDMD mode register */
u8 siglmr1_h; /* SI1 global mode register high */
u8 res0[0x1];
u8 sicmdr1_h; /* SI1 command register high */
u8 res2[0x1];
u8 sistr1_h; /* SI1 status register high */
u8 res3[0x1];
__be16 sirsr1_h; /* SI1 RAM shadow address register high */
u8 sitarc1; /* SI1 RAM counter Tx TDMA */
u8 sitbrc1; /* SI1 RAM counter Tx TDMB */
u8 sitcrc1; /* SI1 RAM counter Tx TDMC */
u8 sitdrc1; /* SI1 RAM counter Tx TDMD */
u8 sirarc1; /* SI1 RAM counter Rx TDMA */
u8 sirbrc1; /* SI1 RAM counter Rx TDMB */
u8 sircrc1; /* SI1 RAM counter Rx TDMC */
u8 sirdrc1; /* SI1 RAM counter Rx TDMD */
u8 res4[0x8];
__be16 siemr1; /* SI1 TDME mode register 16 bits */
__be16 sifmr1; /* SI1 TDMF mode register 16 bits */
__be16 sigmr1; /* SI1 TDMG mode register 16 bits */
__be16 sihmr1; /* SI1 TDMH mode register 16 bits */
u8 siglmg1_l; /* SI1 global mode register low 8 bits */
u8 res5[0x1];
u8 sicmdr1_l; /* SI1 command register low 8 bits */
u8 res6[0x1];
u8 sistr1_l; /* SI1 status register low 8 bits */
u8 res7[0x1];
__be16 sirsr1_l; /* SI1 RAM shadow address register low 16 bits*/
u8 siterc1; /* SI1 RAM counter Tx TDME 8 bits */
u8 sitfrc1; /* SI1 RAM counter Tx TDMF 8 bits */
u8 sitgrc1; /* SI1 RAM counter Tx TDMG 8 bits */
u8 sithrc1; /* SI1 RAM counter Tx TDMH 8 bits */
u8 sirerc1; /* SI1 RAM counter Rx TDME 8 bits */
u8 sirfrc1; /* SI1 RAM counter Rx TDMF 8 bits */
u8 sirgrc1; /* SI1 RAM counter Rx TDMG 8 bits */
u8 sirhrc1; /* SI1 RAM counter Rx TDMH 8 bits */
u8 res8[0x8];
__be32 siml1; /* SI1 multiframe limit register */
u8 siedm1; /* SI1 extended diagnostic mode register */
u8 res9[0xBB];
} __attribute__ ((packed));
/* SI Routing Tables */
struct sir {
u8 tx[0x400];
u8 rx[0x400];
u8 res0[0x800];
} __attribute__ ((packed));
/* USB Controller */
struct usb_ctlr {
u8 usb_usmod;
u8 usb_usadr;
u8 usb_uscom;
u8 res1[1];
__be16 usb_usep1;
__be16 usb_usep2;
__be16 usb_usep3;
__be16 usb_usep4;
u8 res2[4];
__be16 usb_usber;
u8 res3[2];
__be16 usb_usbmr;
u8 res4[1];
u8 usb_usbs;
__be16 usb_ussft;
u8 res5[2];
__be16 usb_usfrn;
u8 res6[0x22];
} __attribute__ ((packed));
/* MCC */
struct mcc {
__be32 mcce; /* MCC event register */
__be32 mccm; /* MCC mask register */
__be32 mccf; /* MCC configuration register */
__be32 merl; /* MCC emergency request level register */
u8 res0[0xF0];
} __attribute__ ((packed));
/* QE UCC Slow */
struct ucc_slow {
__be32 gumr_l; /* UCCx general mode register (low) */
__be32 gumr_h; /* UCCx general mode register (high) */
__be16 upsmr; /* UCCx protocol-specific mode register */
u8 res0[0x2];
__be16 utodr; /* UCCx transmit on demand register */
__be16 udsr; /* UCCx data synchronization register */
__be16 ucce; /* UCCx event register */
u8 res1[0x2];
__be16 uccm; /* UCCx mask register */
u8 res2[0x1];
u8 uccs; /* UCCx status register */
u8 res3[0x24];
__be16 utpt;
u8 guemr; /* UCC general extended mode register */
u8 res4[0x200 - 0x091];
} __attribute__ ((packed));
/* QE UCC Fast */
struct ucc_fast {
__be32 gumr; /* UCCx general mode register */
__be32 upsmr; /* UCCx protocol-specific mode register */
__be16 utodr; /* UCCx transmit on demand register */
u8 res0[0x2];
__be16 udsr; /* UCCx data synchronization register */
u8 res1[0x2];
__be32 ucce; /* UCCx event register */
__be32 uccm; /* UCCx mask register */
u8 uccs; /* UCCx status register */
u8 res2[0x7];
__be32 urfb; /* UCC receive FIFO base */
__be16 urfs; /* UCC receive FIFO size */
u8 res3[0x2];
__be16 urfet; /* UCC receive FIFO emergency threshold */
__be16 urfset; /* UCC receive FIFO special emergency
threshold */
__be32 utfb; /* UCC transmit FIFO base */
__be16 utfs; /* UCC transmit FIFO size */
u8 res4[0x2];
__be16 utfet; /* UCC transmit FIFO emergency threshold */
u8 res5[0x2];
__be16 utftt; /* UCC transmit FIFO transmit threshold */
u8 res6[0x2];
__be16 utpt; /* UCC transmit polling timer */
u8 res7[0x2];
__be32 urtry; /* UCC retry counter register */
u8 res8[0x4C];
u8 guemr; /* UCC general extended mode register */
u8 res9[0x100 - 0x091];
} __attribute__ ((packed));
/* QE UCC */
struct ucc_common {
u8 res1[0x90];
u8 guemr;
u8 res2[0x200 - 0x091];
} __attribute__ ((packed));
struct ucc {
union {
struct ucc_slow slow;
struct ucc_fast fast;
struct ucc_common common;
};
} __attribute__ ((packed));
/* MultiPHY UTOPIA POS Controllers (UPC) */
struct upc {
__be32 upgcr; /* UTOPIA/POS general configuration register */
__be32 uplpa; /* UTOPIA/POS last PHY address */
__be32 uphec; /* ATM HEC register */
__be32 upuc; /* UTOPIA/POS UCC configuration */
__be32 updc1; /* UTOPIA/POS device 1 configuration */
__be32 updc2; /* UTOPIA/POS device 2 configuration */
__be32 updc3; /* UTOPIA/POS device 3 configuration */
__be32 updc4; /* UTOPIA/POS device 4 configuration */
__be32 upstpa; /* UTOPIA/POS STPA threshold */
u8 res0[0xC];
__be32 updrs1_h; /* UTOPIA/POS device 1 rate select */
__be32 updrs1_l; /* UTOPIA/POS device 1 rate select */
__be32 updrs2_h; /* UTOPIA/POS device 2 rate select */
__be32 updrs2_l; /* UTOPIA/POS device 2 rate select */
__be32 updrs3_h; /* UTOPIA/POS device 3 rate select */
__be32 updrs3_l; /* UTOPIA/POS device 3 rate select */
__be32 updrs4_h; /* UTOPIA/POS device 4 rate select */
__be32 updrs4_l; /* UTOPIA/POS device 4 rate select */
__be32 updrp1; /* UTOPIA/POS device 1 receive priority low */
__be32 updrp2; /* UTOPIA/POS device 2 receive priority low */
__be32 updrp3; /* UTOPIA/POS device 3 receive priority low */
__be32 updrp4; /* UTOPIA/POS device 4 receive priority low */
__be32 upde1; /* UTOPIA/POS device 1 event */
__be32 upde2; /* UTOPIA/POS device 2 event */
__be32 upde3; /* UTOPIA/POS device 3 event */
__be32 upde4; /* UTOPIA/POS device 4 event */
__be16 uprp1;
__be16 uprp2;
__be16 uprp3;
__be16 uprp4;
u8 res1[0x8];
__be16 uptirr1_0; /* Device 1 transmit internal rate 0 */
__be16 uptirr1_1; /* Device 1 transmit internal rate 1 */
__be16 uptirr1_2; /* Device 1 transmit internal rate 2 */
__be16 uptirr1_3; /* Device 1 transmit internal rate 3 */
__be16 uptirr2_0; /* Device 2 transmit internal rate 0 */
__be16 uptirr2_1; /* Device 2 transmit internal rate 1 */
__be16 uptirr2_2; /* Device 2 transmit internal rate 2 */
__be16 uptirr2_3; /* Device 2 transmit internal rate 3 */
__be16 uptirr3_0; /* Device 3 transmit internal rate 0 */
__be16 uptirr3_1; /* Device 3 transmit internal rate 1 */
__be16 uptirr3_2; /* Device 3 transmit internal rate 2 */
__be16 uptirr3_3; /* Device 3 transmit internal rate 3 */
__be16 uptirr4_0; /* Device 4 transmit internal rate 0 */
__be16 uptirr4_1; /* Device 4 transmit internal rate 1 */
__be16 uptirr4_2; /* Device 4 transmit internal rate 2 */
__be16 uptirr4_3; /* Device 4 transmit internal rate 3 */
__be32 uper1; /* Device 1 port enable register */
__be32 uper2; /* Device 2 port enable register */
__be32 uper3; /* Device 3 port enable register */
__be32 uper4; /* Device 4 port enable register */
u8 res2[0x150];
} __attribute__ ((packed));
/* SDMA */
struct sdma {
__be32 sdsr; /* Serial DMA status register */
__be32 sdmr; /* Serial DMA mode register */
__be32 sdtr1; /* SDMA system bus threshold register */
__be32 sdtr2; /* SDMA secondary bus threshold register */
__be32 sdhy1; /* SDMA system bus hysteresis register */
__be32 sdhy2; /* SDMA secondary bus hysteresis register */
__be32 sdta1; /* SDMA system bus address register */
__be32 sdta2; /* SDMA secondary bus address register */
__be32 sdtm1; /* SDMA system bus MSNUM register */
__be32 sdtm2; /* SDMA secondary bus MSNUM register */
u8 res0[0x10];
__be32 sdaqr; /* SDMA address bus qualify register */
__be32 sdaqmr; /* SDMA address bus qualify mask register */
u8 res1[0x4];
__be32 sdebcr; /* SDMA CAM entries base register */
u8 res2[0x38];
} __attribute__ ((packed));
/* Debug Space */
struct dbg {
__be32 bpdcr; /* Breakpoint debug command register */
__be32 bpdsr; /* Breakpoint debug status register */
__be32 bpdmr; /* Breakpoint debug mask register */
__be32 bprmrr0; /* Breakpoint request mode risc register 0 */
__be32 bprmrr1; /* Breakpoint request mode risc register 1 */
u8 res0[0x8];
__be32 bprmtr0; /* Breakpoint request mode trb register 0 */
__be32 bprmtr1; /* Breakpoint request mode trb register 1 */
u8 res1[0x8];
__be32 bprmir; /* Breakpoint request mode immediate register */
__be32 bprmsr; /* Breakpoint request mode serial register */
__be32 bpemr; /* Breakpoint exit mode register */
u8 res2[0x48];
} __attribute__ ((packed));
/* RISC Special Registers (Trap and Breakpoint) */
struct rsp {
u8 fixme[0x100];
} __attribute__ ((packed));
struct qe_immap {
struct qe_iram iram; /* I-RAM */
struct qe_ic_regs ic; /* Interrupt Controller */
struct cp_qe cp; /* Communications Processor */
struct qe_mux qmx; /* QE Multiplexer */
struct qe_timers qet; /* QE Timers */
struct spi spi[0x2]; /* spi */
struct mcc mcc; /* mcc */
struct qe_brg brg; /* brg */
struct usb_ctlr usb; /* USB */
struct si1 si1; /* SI */
u8 res11[0x800];
struct sir sir; /* SI Routing Tables */
struct ucc ucc1; /* ucc1 */
struct ucc ucc3; /* ucc3 */
struct ucc ucc5; /* ucc5 */
struct ucc ucc7; /* ucc7 */
u8 res12[0x600];
struct upc upc1; /* MultiPHY UTOPIA POS Ctrlr 1*/
struct ucc ucc2; /* ucc2 */
struct ucc ucc4; /* ucc4 */
struct ucc ucc6; /* ucc6 */
struct ucc ucc8; /* ucc8 */
u8 res13[0x600];
struct upc upc2; /* MultiPHY UTOPIA POS Ctrlr 2*/
struct sdma sdma; /* SDMA */
struct dbg dbg; /* Debug Space */
struct rsp rsp[0x2]; /* RISC Special Registers
(Trap and Breakpoint) */
u8 res14[0x300];
u8 res15[0x3A00];
u8 res16[0x8000]; /* 0x108000 - 0x110000 */
u8 muram[0xC000]; /* 0x110000 - 0x11C000
Multi-user RAM */
u8 res17[0x24000]; /* 0x11C000 - 0x140000 */
u8 res18[0xC0000]; /* 0x140000 - 0x200000 */
} __attribute__ ((packed));
extern struct qe_immap *qe_immr;
extern phys_addr_t get_qe_base(void);
static inline unsigned long immrbar_virt_to_phys(volatile void * address)
{
if ( ((u32)address >= (u32)qe_immr) &&
((u32)address < ((u32)qe_immr + QE_IMMAP_SIZE)) )
return (unsigned long)(address - (u32)qe_immr +
(u32)get_qe_base());
return (unsigned long)virt_to_phys(address);
}
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_IMMAP_QE_H */
include/asm-powerpc/qe.h 0 → 100644
View file @ 13bbd8d9
/*
* Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
*
* Description:
* QUICC Engine (QE) external definitions and structure.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef _ASM_POWERPC_QE_H
#define _ASM_POWERPC_QE_H
#ifdef __KERNEL__
#include <asm/immap_qe.h>
#define QE_NUM_OF_SNUM 28
#define QE_NUM_OF_BRGS 16
#define QE_NUM_OF_PORTS 1024
/* Memory partitions
*/
#define MEM_PART_SYSTEM 0
#define MEM_PART_SECONDARY 1
#define MEM_PART_MURAM 2
/* Export QE common operations */
extern void qe_reset(void);
extern int par_io_init(struct device_node *np);
extern int par_io_of_config(struct device_node *np);
/* QE internal API */
int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
void qe_setbrg(u32 brg, u32 rate);
int qe_get_snum(void);
void qe_put_snum(u8 snum);
u32 qe_muram_alloc(u32 size, u32 align);
int qe_muram_free(u32 offset);
u32 qe_muram_alloc_fixed(u32 offset, u32 size);
void qe_muram_dump(void);
void *qe_muram_addr(u32 offset);
/* Buffer descriptors */
struct qe_bd {
u16 status;
u16 length;
u32 buf;
} __attribute__ ((packed));
#define BD_STATUS_MASK 0xffff0000
#define BD_LENGTH_MASK 0x0000ffff
/* Alignment */
#define QE_INTR_TABLE_ALIGN 16 /* ??? */
#define QE_ALIGNMENT_OF_BD 8
#define QE_ALIGNMENT_OF_PRAM 64
/* RISC allocation */
enum qe_risc_allocation {
QE_RISC_ALLOCATION_RISC1 = 1, /* RISC 1 */
QE_RISC_ALLOCATION_RISC2 = 2, /* RISC 2 */
QE_RISC_ALLOCATION_RISC1_AND_RISC2 = 3 /* Dynamically choose
RISC 1 or RISC 2 */
};
/* QE extended filtering Table Lookup Key Size */
enum qe_fltr_tbl_lookup_key_size {
QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES
= 0x3f, /* LookupKey parsed by the Generate LookupKey
CMD is truncated to 8 bytes */
QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES
= 0x5f, /* LookupKey parsed by the Generate LookupKey
CMD is truncated to 16 bytes */
};
/* QE FLTR extended filtering Largest External Table Lookup Key Size */
enum qe_fltr_largest_external_tbl_lookup_key_size {
QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE
= 0x0,/* not used */
QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES
= QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES, /* 8 bytes */
QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES
= QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES, /* 16 bytes */
};
/* structure representing QE parameter RAM */
struct qe_timer_tables {
u16 tm_base; /* QE timer table base adr */
u16 tm_ptr; /* QE timer table pointer */
u16 r_tmr; /* QE timer mode register */
u16 r_tmv; /* QE timer valid register */
u32 tm_cmd; /* QE timer cmd register */
u32 tm_cnt; /* QE timer internal cnt */
} __attribute__ ((packed));
#define QE_FLTR_TAD_SIZE 8
/* QE extended filtering Termination Action Descriptor (TAD) */
struct qe_fltr_tad {
u8 serialized[QE_FLTR_TAD_SIZE];
} __attribute__ ((packed));
/* Communication Direction */
enum comm_dir {
COMM_DIR_NONE = 0,
COMM_DIR_RX = 1,
COMM_DIR_TX = 2,
COMM_DIR_RX_AND_TX = 3
};
/* Clocks and BRGs */
enum qe_clock {
QE_CLK_NONE = 0,
QE_BRG1, /* Baud Rate Generator 1 */
QE_BRG2, /* Baud Rate Generator 2 */
QE_BRG3, /* Baud Rate Generator 3 */
QE_BRG4, /* Baud Rate Generator 4 */
QE_BRG5, /* Baud Rate Generator 5 */
QE_BRG6, /* Baud Rate Generator 6 */
QE_BRG7, /* Baud Rate Generator 7 */
QE_BRG8, /* Baud Rate Generator 8 */
QE_BRG9, /* Baud Rate Generator 9 */
QE_BRG10, /* Baud Rate Generator 10 */
QE_BRG11, /* Baud Rate Generator 11 */
QE_BRG12, /* Baud Rate Generator 12 */
QE_BRG13, /* Baud Rate Generator 13 */
QE_BRG14, /* Baud Rate Generator 14 */
QE_BRG15, /* Baud Rate Generator 15 */
QE_BRG16, /* Baud Rate Generator 16 */
QE_CLK1, /* Clock 1 */
QE_CLK2, /* Clock 2 */
QE_CLK3, /* Clock 3 */
QE_CLK4, /* Clock 4 */
QE_CLK5, /* Clock 5 */
QE_CLK6, /* Clock 6 */
QE_CLK7, /* Clock 7 */
QE_CLK8, /* Clock 8 */
QE_CLK9, /* Clock 9 */
QE_CLK10, /* Clock 10 */
QE_CLK11, /* Clock 11 */
QE_CLK12, /* Clock 12 */
QE_CLK13, /* Clock 13 */
QE_CLK14, /* Clock 14 */
QE_CLK15, /* Clock 15 */
QE_CLK16, /* Clock 16 */
QE_CLK17, /* Clock 17 */
QE_CLK18, /* Clock 18 */
QE_CLK19, /* Clock 19 */
QE_CLK20, /* Clock 20 */
QE_CLK21, /* Clock 21 */
QE_CLK22, /* Clock 22 */
QE_CLK23, /* Clock 23 */
QE_CLK24, /* Clock 24 */
QE_CLK_DUMMY,
};
/* QE CMXUCR Registers.
* There are two UCCs represented in each of the four CMXUCR registers.
* These values are for the UCC in the LSBs
*/
#define QE_CMXUCR_MII_ENET_MNG 0x00007000
#define QE_CMXUCR_MII_ENET_MNG_SHIFT 12
#define QE_CMXUCR_GRANT 0x00008000
#define QE_CMXUCR_TSA 0x00004000
#define QE_CMXUCR_BKPT 0x00000100
#define QE_CMXUCR_TX_CLK_SRC_MASK 0x0000000F
/* QE CMXGCR Registers.
*/
#define QE_CMXGCR_MII_ENET_MNG 0x00007000
#define QE_CMXGCR_MII_ENET_MNG_SHIFT 12
#define QE_CMXGCR_USBCS 0x0000000f
/* QE CECR Commands.
*/
#define QE_CR_FLG 0x00010000
#define QE_RESET 0x80000000
#define QE_INIT_TX_RX 0x00000000
#define QE_INIT_RX 0x00000001
#define QE_INIT_TX 0x00000002
#define QE_ENTER_HUNT_MODE 0x00000003
#define QE_STOP_TX 0x00000004
#define QE_GRACEFUL_STOP_TX 0x00000005
#define QE_RESTART_TX 0x00000006
#define QE_CLOSE_RX_BD 0x00000007
#define QE_SWITCH_COMMAND 0x00000007
#define QE_SET_GROUP_ADDRESS 0x00000008
#define QE_START_IDMA 0x00000009
#define QE_MCC_STOP_RX 0x00000009
#define QE_ATM_TRANSMIT 0x0000000a
#define QE_HPAC_CLEAR_ALL 0x0000000b
#define QE_GRACEFUL_STOP_RX 0x0000001a
#define QE_RESTART_RX 0x0000001b
#define QE_HPAC_SET_PRIORITY 0x0000010b
#define QE_HPAC_STOP_TX 0x0000020b
#define QE_HPAC_STOP_RX 0x0000030b
#define QE_HPAC_GRACEFUL_STOP_TX 0x0000040b
#define QE_HPAC_GRACEFUL_STOP_RX 0x0000050b
#define QE_HPAC_START_TX 0x0000060b
#define QE_HPAC_START_RX 0x0000070b
#define QE_USB_STOP_TX 0x0000000a
#define QE_USB_RESTART_TX 0x0000000b
#define QE_QMC_STOP_TX 0x0000000c
#define QE_QMC_STOP_RX 0x0000000d
#define QE_SS7_SU_FIL_RESET 0x0000000e
/* jonathbr added from here down for 83xx */
#define QE_RESET_BCS 0x0000000a
#define QE_MCC_INIT_TX_RX_16 0x00000003
#define QE_MCC_STOP_TX 0x00000004
#define QE_MCC_INIT_TX_1 0x00000005
#define QE_MCC_INIT_RX_1 0x00000006
#define QE_MCC_RESET 0x00000007
#define QE_SET_TIMER 0x00000008
#define QE_RANDOM_NUMBER 0x0000000c
#define QE_ATM_MULTI_THREAD_INIT 0x00000011
#define QE_ASSIGN_PAGE 0x00000012
#define QE_ADD_REMOVE_HASH_ENTRY 0x00000013
#define QE_START_FLOW_CONTROL 0x00000014
#define QE_STOP_FLOW_CONTROL 0x00000015
#define QE_ASSIGN_PAGE_TO_DEVICE 0x00000016
#define QE_ASSIGN_RISC 0x00000010
#define QE_CR_MCN_NORMAL_SHIFT 6
#define QE_CR_MCN_USB_SHIFT 4
#define QE_CR_MCN_RISC_ASSIGN_SHIFT 8
#define QE_CR_SNUM_SHIFT 17
/* QE CECR Sub Block - sub block of QE command.
*/
#define QE_CR_SUBBLOCK_INVALID 0x00000000
#define QE_CR_SUBBLOCK_USB 0x03200000
#define QE_CR_SUBBLOCK_UCCFAST1 0x02000000
#define QE_CR_SUBBLOCK_UCCFAST2 0x02200000
#define QE_CR_SUBBLOCK_UCCFAST3 0x02400000
#define QE_CR_SUBBLOCK_UCCFAST4 0x02600000
#define QE_CR_SUBBLOCK_UCCFAST5 0x02800000
#define QE_CR_SUBBLOCK_UCCFAST6 0x02a00000
#define QE_CR_SUBBLOCK_UCCFAST7 0x02c00000
#define QE_CR_SUBBLOCK_UCCFAST8 0x02e00000
#define QE_CR_SUBBLOCK_UCCSLOW1 0x00000000
#define QE_CR_SUBBLOCK_UCCSLOW2 0x00200000
#define QE_CR_SUBBLOCK_UCCSLOW3 0x00400000
#define QE_CR_SUBBLOCK_UCCSLOW4 0x00600000
#define QE_CR_SUBBLOCK_UCCSLOW5 0x00800000
#define QE_CR_SUBBLOCK_UCCSLOW6 0x00a00000
#define QE_CR_SUBBLOCK_UCCSLOW7 0x00c00000
#define QE_CR_SUBBLOCK_UCCSLOW8 0x00e00000
#define QE_CR_SUBBLOCK_MCC1 0x03800000
#define QE_CR_SUBBLOCK_MCC2 0x03a00000
#define QE_CR_SUBBLOCK_MCC3 0x03000000
#define QE_CR_SUBBLOCK_IDMA1 0x02800000
#define QE_CR_SUBBLOCK_IDMA2 0x02a00000
#define QE_CR_SUBBLOCK_IDMA3 0x02c00000
#define QE_CR_SUBBLOCK_IDMA4 0x02e00000
#define QE_CR_SUBBLOCK_HPAC 0x01e00000
#define QE_CR_SUBBLOCK_SPI1 0x01400000
#define QE_CR_SUBBLOCK_SPI2 0x01600000
#define QE_CR_SUBBLOCK_RAND 0x01c00000
#define QE_CR_SUBBLOCK_TIMER 0x01e00000
#define QE_CR_SUBBLOCK_GENERAL 0x03c00000
/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command */
#define QE_CR_PROTOCOL_UNSPECIFIED 0x00 /* For all other protocols */
#define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00
#define QE_CR_PROTOCOL_ATM_POS 0x0A
#define QE_CR_PROTOCOL_ETHERNET 0x0C
#define QE_CR_PROTOCOL_L2_SWITCH 0x0D
/* BMR byte order */
#define QE_BMR_BYTE_ORDER_BO_PPC 0x08 /* powerpc little endian */
#define QE_BMR_BYTE_ORDER_BO_MOT 0x10 /* motorola big endian */
#define QE_BMR_BYTE_ORDER_BO_MAX 0x18
/* BRG configuration register */
#define QE_BRGC_ENABLE 0x00010000
#define QE_BRGC_DIVISOR_SHIFT 1
#define QE_BRGC_DIVISOR_MAX 0xFFF
#define QE_BRGC_DIV16 1
/* QE Timers registers */
#define QE_GTCFR1_PCAS 0x80
#define QE_GTCFR1_STP2 0x20
#define QE_GTCFR1_RST2 0x10
#define QE_GTCFR1_GM2 0x08
#define QE_GTCFR1_GM1 0x04
#define QE_GTCFR1_STP1 0x02
#define QE_GTCFR1_RST1 0x01
/* SDMA registers */
#define QE_SDSR_BER1 0x02000000
#define QE_SDSR_BER2 0x01000000
#define QE_SDMR_GLB_1_MSK 0x80000000
#define QE_SDMR_ADR_SEL 0x20000000
#define QE_SDMR_BER1_MSK 0x02000000
#define QE_SDMR_BER2_MSK 0x01000000
#define QE_SDMR_EB1_MSK 0x00800000
#define QE_SDMR_ER1_MSK 0x00080000
#define QE_SDMR_ER2_MSK 0x00040000
#define QE_SDMR_CEN_MASK 0x0000E000
#define QE_SDMR_SBER_1 0x00000200
#define QE_SDMR_SBER_2 0x00000200
#define QE_SDMR_EB1_PR_MASK 0x000000C0
#define QE_SDMR_ER1_PR 0x00000008
#define QE_SDMR_CEN_SHIFT 13
#define QE_SDMR_EB1_PR_SHIFT 6
#define QE_SDTM_MSNUM_SHIFT 24
#define QE_SDEBCR_BA_MASK 0x01FFFFFF
/* UPC */
#define UPGCR_PROTOCOL 0x80000000 /* protocol ul2 or pl2 */
#define UPGCR_TMS 0x40000000 /* Transmit master/slave mode */
#define UPGCR_RMS 0x20000000 /* Receive master/slave mode */
#define UPGCR_ADDR 0x10000000 /* Master MPHY Addr multiplexing */
#define UPGCR_DIAG 0x01000000 /* Diagnostic mode */
/* UCC */
#define UCC_GUEMR_MODE_MASK_RX 0x02
#define UCC_GUEMR_MODE_MASK_TX 0x01
#define UCC_GUEMR_MODE_FAST_RX 0x02
#define UCC_GUEMR_MODE_FAST_TX 0x01
#define UCC_GUEMR_MODE_SLOW_RX 0x00
#define UCC_GUEMR_MODE_SLOW_TX 0x00
#define UCC_GUEMR_SET_RESERVED3 0x10 /* Bit 3 in the guemr is reserved but
must be set 1 */
/* structure representing UCC SLOW parameter RAM */
struct ucc_slow_pram {
u16 rbase; /* RX BD base address */
u16 tbase; /* TX BD base address */
u8 rfcr; /* Rx function code */
u8 tfcr; /* Tx function code */
u16 mrblr; /* Rx buffer length */
u32 rstate; /* Rx internal state */
u32 rptr; /* Rx internal data pointer */
u16 rbptr; /* rb BD Pointer */
u16 rcount; /* Rx internal byte count */
u32 rtemp; /* Rx temp */
u32 tstate; /* Tx internal state */
u32 tptr; /* Tx internal data pointer */
u16 tbptr; /* Tx BD pointer */
u16 tcount; /* Tx byte count */
u32 ttemp; /* Tx temp */
u32 rcrc; /* temp receive CRC */
u32 tcrc; /* temp transmit CRC */
} __attribute__ ((packed));
/* General UCC SLOW Mode Register (GUMRH & GUMRL) */
#define UCC_SLOW_GUMR_H_CRC16 0x00004000
#define UCC_SLOW_GUMR_H_CRC16CCITT 0x00000000
#define UCC_SLOW_GUMR_H_CRC32CCITT 0x00008000
#define UCC_SLOW_GUMR_H_REVD 0x00002000
#define UCC_SLOW_GUMR_H_TRX 0x00001000
#define UCC_SLOW_GUMR_H_TTX 0x00000800
#define UCC_SLOW_GUMR_H_CDP 0x00000400
#define UCC_SLOW_GUMR_H_CTSP 0x00000200
#define UCC_SLOW_GUMR_H_CDS 0x00000100
#define UCC_SLOW_GUMR_H_CTSS 0x00000080
#define UCC_SLOW_GUMR_H_TFL 0x00000040
#define UCC_SLOW_GUMR_H_RFW 0x00000020
#define UCC_SLOW_GUMR_H_TXSY 0x00000010
#define UCC_SLOW_GUMR_H_4SYNC 0x00000004
#define UCC_SLOW_GUMR_H_8SYNC 0x00000008
#define UCC_SLOW_GUMR_H_16SYNC 0x0000000c
#define UCC_SLOW_GUMR_H_RTSM 0x00000002
#define UCC_SLOW_GUMR_H_RSYN 0x00000001
#define UCC_SLOW_GUMR_L_TCI 0x10000000
#define UCC_SLOW_GUMR_L_RINV 0x02000000
#define UCC_SLOW_GUMR_L_TINV 0x01000000
#define UCC_SLOW_GUMR_L_TEND 0x00020000
#define UCC_SLOW_GUMR_L_ENR 0x00000020
#define UCC_SLOW_GUMR_L_ENT 0x00000010
/* General UCC FAST Mode Register */
#define UCC_FAST_GUMR_TCI 0x20000000
#define UCC_FAST_GUMR_TRX 0x10000000
#define UCC_FAST_GUMR_TTX 0x08000000
#define UCC_FAST_GUMR_CDP 0x04000000
#define UCC_FAST_GUMR_CTSP 0x02000000
#define UCC_FAST_GUMR_CDS 0x01000000
#define UCC_FAST_GUMR_CTSS 0x00800000
#define UCC_FAST_GUMR_TXSY 0x00020000
#define UCC_FAST_GUMR_RSYN 0x00010000
#define UCC_FAST_GUMR_RTSM 0x00002000
#define UCC_FAST_GUMR_REVD 0x00000400
#define UCC_FAST_GUMR_ENR 0x00000020
#define UCC_FAST_GUMR_ENT 0x00000010
/* Slow UCC Event Register (UCCE) */
#define UCC_SLOW_UCCE_GLR 0x1000
#define UCC_SLOW_UCCE_GLT 0x0800
#define UCC_SLOW_UCCE_DCC 0x0400
#define UCC_SLOW_UCCE_FLG 0x0200
#define UCC_SLOW_UCCE_AB 0x0200
#define UCC_SLOW_UCCE_IDLE 0x0100
#define UCC_SLOW_UCCE_GRA 0x0080
#define UCC_SLOW_UCCE_TXE 0x0010
#define UCC_SLOW_UCCE_RXF 0x0008
#define UCC_SLOW_UCCE_CCR 0x0008
#define UCC_SLOW_UCCE_RCH 0x0008
#define UCC_SLOW_UCCE_BSY 0x0004
#define UCC_SLOW_UCCE_TXB 0x0002
#define UCC_SLOW_UCCE_TX 0x0002
#define UCC_SLOW_UCCE_RX 0x0001
#define UCC_SLOW_UCCE_GOV 0x0001
#define UCC_SLOW_UCCE_GUN 0x0002
#define UCC_SLOW_UCCE_GINT 0x0004
#define UCC_SLOW_UCCE_IQOV 0x0008
#define UCC_SLOW_UCCE_HDLC_SET (UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_TXB | UCC_SLOW_UCCE_RXF | \
UCC_SLOW_UCCE_DCC | UCC_SLOW_UCCE_GLT | UCC_SLOW_UCCE_GLR)
#define UCC_SLOW_UCCE_ENET_SET (UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_TXB | UCC_SLOW_UCCE_RXF)
#define UCC_SLOW_UCCE_TRANS_SET (UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_TX | UCC_SLOW_UCCE_RX | \
UCC_SLOW_UCCE_DCC | UCC_SLOW_UCCE_GLT | UCC_SLOW_UCCE_GLR)
#define UCC_SLOW_UCCE_UART_SET (UCC_SLOW_UCCE_BSY | UCC_SLOW_UCCE_GRA | \
UCC_SLOW_UCCE_TXB | UCC_SLOW_UCCE_TX | UCC_SLOW_UCCE_RX | \
UCC_SLOW_UCCE_GLT | UCC_SLOW_UCCE_GLR)
#define UCC_SLOW_UCCE_QMC_SET (UCC_SLOW_UCCE_IQOV | UCC_SLOW_UCCE_GINT | \
UCC_SLOW_UCCE_GUN | UCC_SLOW_UCCE_GOV)
#define UCC_SLOW_UCCE_OTHER (UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_DCC | UCC_SLOW_UCCE_GLT | \
UCC_SLOW_UCCE_GLR)
#define UCC_SLOW_INTR_TX UCC_SLOW_UCCE_TXB
#define UCC_SLOW_INTR_RX (UCC_SLOW_UCCE_RXF | UCC_SLOW_UCCE_RX)
#define UCC_SLOW_INTR (UCC_SLOW_INTR_TX | UCC_SLOW_INTR_RX)
/* UCC Transmit On Demand Register (UTODR) */
#define UCC_SLOW_TOD 0x8000
#define UCC_FAST_TOD 0x8000
/* Function code masks */
#define FC_GBL 0x20
#define FC_DTB_LCL 0x02
#define UCC_FAST_FUNCTION_CODE_GBL 0x20
#define UCC_FAST_FUNCTION_CODE_DTB_LCL 0x02
#define UCC_FAST_FUNCTION_CODE_BDB_LCL 0x01
static inline long IS_MURAM_ERR(const u32 offset)
{
return offset > (u32) - 1000L;
}
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_QE_H */
include/asm-powerpc/qe_ic.h 0 → 100644
View file @ 13bbd8d9
/*
* include/asm-powerpc/qe_ic.h
*
* Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
*
* Description:
* QE IC external definitions and structure.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef _ASM_POWERPC_QE_IC_H
#define _ASM_POWERPC_QE_IC_H
#include <linux/irq.h>
#define NUM_OF_QE_IC_GROUPS 6
/* Flags when we init the QE IC */
#define QE_IC_SPREADMODE_GRP_W 0x00000001
#define QE_IC_SPREADMODE_GRP_X 0x00000002
#define QE_IC_SPREADMODE_GRP_Y 0x00000004
#define QE_IC_SPREADMODE_GRP_Z 0x00000008
#define QE_IC_SPREADMODE_GRP_RISCA 0x00000010
#define QE_IC_SPREADMODE_GRP_RISCB 0x00000020
#define QE_IC_LOW_SIGNAL 0x00000100
#define QE_IC_HIGH_SIGNAL 0x00000200
#define QE_IC_GRP_W_PRI0_DEST_SIGNAL_HIGH 0x00001000
#define QE_IC_GRP_W_PRI1_DEST_SIGNAL_HIGH 0x00002000
#define QE_IC_GRP_X_PRI0_DEST_SIGNAL_HIGH 0x00004000
#define QE_IC_GRP_X_PRI1_DEST_SIGNAL_HIGH 0x00008000
#define QE_IC_GRP_Y_PRI0_DEST_SIGNAL_HIGH 0x00010000
#define QE_IC_GRP_Y_PRI1_DEST_SIGNAL_HIGH 0x00020000
#define QE_IC_GRP_Z_PRI0_DEST_SIGNAL_HIGH 0x00040000
#define QE_IC_GRP_Z_PRI1_DEST_SIGNAL_HIGH 0x00080000
#define QE_IC_GRP_RISCA_PRI0_DEST_SIGNAL_HIGH 0x00100000
#define QE_IC_GRP_RISCA_PRI1_DEST_SIGNAL_HIGH 0x00200000
#define QE_IC_GRP_RISCB_PRI0_DEST_SIGNAL_HIGH 0x00400000
#define QE_IC_GRP_RISCB_PRI1_DEST_SIGNAL_HIGH 0x00800000
#define QE_IC_GRP_W_DEST_SIGNAL_SHIFT (12)
/* QE interrupt sources groups */
enum qe_ic_grp_id {
QE_IC_GRP_W = 0, /* QE interrupt controller group W */
QE_IC_GRP_X, /* QE interrupt controller group X */
QE_IC_GRP_Y, /* QE interrupt controller group Y */
QE_IC_GRP_Z, /* QE interrupt controller group Z */
QE_IC_GRP_RISCA, /* QE interrupt controller RISC group A */
QE_IC_GRP_RISCB /* QE interrupt controller RISC group B */
};
void qe_ic_init(struct device_node *node, unsigned int flags);
void qe_ic_set_highest_priority(unsigned int virq, int high);
int qe_ic_set_priority(unsigned int virq, unsigned int priority);
int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high);
#endif /* _ASM_POWERPC_QE_IC_H */
include/asm-powerpc/system.h
View file @ 13bbd8d9
......@@ -91,10 +91,6 @@ DEBUGGER_BOILERPLATE(debugger_iabr_match)
DEBUGGER_BOILERPLATE(debugger_dabr_match)
DEBUGGER_BOILERPLATE(debugger_fault_handler)
#ifdef CONFIG_XMON
extern void xmon_init(int enable);
#endif
#else
static inline int debugger(struct pt_regs *regs) { return 0; }
static inline int debugger_ipi(struct pt_regs *regs) { return 0; }
......
include/asm-powerpc/ucc.h 0 → 100644
View file @ 13bbd8d9
/*
* Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
*
* Description:
* Internal header file for UCC unit routines.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef __UCC_H__
#define __UCC_H__
#include <asm/immap_qe.h>
#include <asm/qe.h>
#define STATISTICS
#define UCC_MAX_NUM 8
/* Slow or fast type for UCCs.
*/
enum ucc_speed_type {
UCC_SPEED_TYPE_FAST, UCC_SPEED_TYPE_SLOW
};
/* Initial UCCs Parameter RAM address relative to: MEM_MAP_BASE (IMMR).
*/
enum ucc_pram_initial_offset {
UCC_PRAM_OFFSET_UCC1 = 0x8400,
UCC_PRAM_OFFSET_UCC2 = 0x8500,
UCC_PRAM_OFFSET_UCC3 = 0x8600,
UCC_PRAM_OFFSET_UCC4 = 0x9000,
UCC_PRAM_OFFSET_UCC5 = 0x8000,
UCC_PRAM_OFFSET_UCC6 = 0x8100,
UCC_PRAM_OFFSET_UCC7 = 0x8200,
UCC_PRAM_OFFSET_UCC8 = 0x8300
};
/* ucc_set_type
* Sets UCC to slow or fast mode.
*
* ucc_num - (In) number of UCC (0-7).
* regs - (In) pointer to registers base for the UCC.
* speed - (In) slow or fast mode for UCC.
*/
int ucc_set_type(int ucc_num, struct ucc_common *regs,
enum ucc_speed_type speed);
/* ucc_init_guemr
* Init the Guemr register.
*
* regs - (In) pointer to registers base for the UCC.
*/
int ucc_init_guemr(struct ucc_common *regs);
int ucc_set_qe_mux_mii_mng(int ucc_num);
int ucc_set_qe_mux_rxtx(int ucc_num, enum qe_clock clock, enum comm_dir mode);
int ucc_mux_set_grant_tsa_bkpt(int ucc_num, int set, u32 mask);
/* QE MUX clock routing for UCC
*/
static inline int ucc_set_qe_mux_grant(int ucc_num, int set)
{
return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_GRANT);
}
static inline int ucc_set_qe_mux_tsa(int ucc_num, int set)
{
return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_TSA);
}
static inline int ucc_set_qe_mux_bkpt(int ucc_num, int set)
{
return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_BKPT);
}
#endif /* __UCC_H__ */
include/asm-powerpc/ucc_fast.h 0 → 100644
View file @ 13bbd8d9
/*
* include/asm-powerpc/ucc_fast.h
*
* Internal header file for UCC FAST unit routines.
*
* Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef __UCC_FAST_H__
#define __UCC_FAST_H__
#include <linux/kernel.h>
#include <asm/immap_qe.h>
#include <asm/qe.h>
#include "ucc.h"
/* Receive BD's status */
#define R_E 0x80000000 /* buffer empty */
#define R_W 0x20000000 /* wrap bit */
#define R_I 0x10000000 /* interrupt on reception */
#define R_L 0x08000000 /* last */
#define R_F 0x04000000 /* first */
/* transmit BD's status */
#define T_R 0x80000000 /* ready bit */
#define T_W 0x20000000 /* wrap bit */
#define T_I 0x10000000 /* interrupt on completion */
#define T_L 0x08000000 /* last */
/* Rx Data buffer must be 4 bytes aligned in most cases */
#define UCC_FAST_RX_ALIGN 4
#define UCC_FAST_MRBLR_ALIGNMENT 4
#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT 8
/* Sizes */
#define UCC_FAST_URFS_MIN_VAL 0x88
#define UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR 8
/* ucc_fast_channel_protocol_mode - UCC FAST mode */
enum ucc_fast_channel_protocol_mode {
UCC_FAST_PROTOCOL_MODE_HDLC = 0x00000000,
UCC_FAST_PROTOCOL_MODE_RESERVED01 = 0x00000001,
UCC_FAST_PROTOCOL_MODE_RESERVED_QMC = 0x00000002,
UCC_FAST_PROTOCOL_MODE_RESERVED02 = 0x00000003,
UCC_FAST_PROTOCOL_MODE_RESERVED_UART = 0x00000004,
UCC_FAST_PROTOCOL_MODE_RESERVED03 = 0x00000005,
UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_1 = 0x00000006,
UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_2 = 0x00000007,
UCC_FAST_PROTOCOL_MODE_RESERVED_BISYNC = 0x00000008,
UCC_FAST_PROTOCOL_MODE_RESERVED04 = 0x00000009,
UCC_FAST_PROTOCOL_MODE_ATM = 0x0000000A,
UCC_FAST_PROTOCOL_MODE_RESERVED05 = 0x0000000B,
UCC_FAST_PROTOCOL_MODE_ETHERNET = 0x0000000C,
UCC_FAST_PROTOCOL_MODE_RESERVED06 = 0x0000000D,
UCC_FAST_PROTOCOL_MODE_POS = 0x0000000E,
UCC_FAST_PROTOCOL_MODE_RESERVED07 = 0x0000000F
};
/* ucc_fast_transparent_txrx - UCC Fast Transparent TX & RX */
enum ucc_fast_transparent_txrx {
UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_NORMAL = 0x00000000,
UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_TRANSPARENT = 0x18000000
};
/* UCC fast diagnostic mode */
enum ucc_fast_diag_mode {
UCC_FAST_DIAGNOSTIC_NORMAL = 0x0,
UCC_FAST_DIAGNOSTIC_LOCAL_LOOP_BACK = 0x40000000,
UCC_FAST_DIAGNOSTIC_AUTO_ECHO = 0x80000000,
UCC_FAST_DIAGNOSTIC_LOOP_BACK_AND_ECHO = 0xC0000000
};
/* UCC fast Sync length (transparent mode only) */
enum ucc_fast_sync_len {
UCC_FAST_SYNC_LEN_NOT_USED = 0x0,
UCC_FAST_SYNC_LEN_AUTOMATIC = 0x00004000,
UCC_FAST_SYNC_LEN_8_BIT = 0x00008000,
UCC_FAST_SYNC_LEN_16_BIT = 0x0000C000
};
/* UCC fast RTS mode */
enum ucc_fast_ready_to_send {
UCC_FAST_SEND_IDLES_BETWEEN_FRAMES = 0x00000000,
UCC_FAST_SEND_FLAGS_BETWEEN_FRAMES = 0x00002000
};
/* UCC fast receiver decoding mode */
enum ucc_fast_rx_decoding_method {
UCC_FAST_RX_ENCODING_NRZ = 0x00000000,
UCC_FAST_RX_ENCODING_NRZI = 0x00000800,
UCC_FAST_RX_ENCODING_RESERVED0 = 0x00001000,
UCC_FAST_RX_ENCODING_RESERVED1 = 0x00001800
};
/* UCC fast transmitter encoding mode */
enum ucc_fast_tx_encoding_method {
UCC_FAST_TX_ENCODING_NRZ = 0x00000000,
UCC_FAST_TX_ENCODING_NRZI = 0x00000100,
UCC_FAST_TX_ENCODING_RESERVED0 = 0x00000200,
UCC_FAST_TX_ENCODING_RESERVED1 = 0x00000300
};
/* UCC fast CRC length */
enum ucc_fast_transparent_tcrc {
UCC_FAST_16_BIT_CRC = 0x00000000,
UCC_FAST_CRC_RESERVED0 = 0x00000040,
UCC_FAST_32_BIT_CRC = 0x00000080,
UCC_FAST_CRC_RESERVED1 = 0x000000C0
};
/* Fast UCC initialization structure */
struct ucc_fast_info {
int ucc_num;
enum qe_clock rx_clock;
enum qe_clock tx_clock;
u32 regs;
int irq;
u32 uccm_mask;
int bd_mem_part;
int brkpt_support;
int grant_support;
int tsa;
int cdp;
int cds;
int ctsp;
int ctss;
int tci;
int txsy;
int rtsm;
int revd;
int rsyn;
u16 max_rx_buf_length;
u16 urfs;
u16 urfet;
u16 urfset;
u16 utfs;
u16 utfet;
u16 utftt;
u16 ufpt;
enum ucc_fast_channel_protocol_mode mode;
enum ucc_fast_transparent_txrx ttx_trx;
enum ucc_fast_tx_encoding_method tenc;
enum ucc_fast_rx_decoding_method renc;
enum ucc_fast_transparent_tcrc tcrc;
enum ucc_fast_sync_len synl;
};
struct ucc_fast_private {
struct ucc_fast_info *uf_info;
struct ucc_fast *uf_regs; /* a pointer to memory map of UCC regs. */
u32 *p_ucce; /* a pointer to the event register in memory. */
u32 *p_uccm; /* a pointer to the mask register in memory. */
int enabled_tx; /* Whether channel is enabled for Tx (ENT) */
int enabled_rx; /* Whether channel is enabled for Rx (ENR) */
int stopped_tx; /* Whether channel has been stopped for Tx
(STOP_TX, etc.) */
int stopped_rx; /* Whether channel has been stopped for Rx */
u32 ucc_fast_tx_virtual_fifo_base_offset;/* pointer to base of Tx
virtual fifo */
u32 ucc_fast_rx_virtual_fifo_base_offset;/* pointer to base of Rx
virtual fifo */
#ifdef STATISTICS
u32 tx_frames; /* Transmitted frames counter. */
u32 rx_frames; /* Received frames counter (only frames
passed to application). */
u32 tx_discarded; /* Discarded tx frames counter (frames that
were discarded by the driver due to errors).
*/
u32 rx_discarded; /* Discarded rx frames counter (frames that
were discarded by the driver due to errors).
*/
#endif /* STATISTICS */
u16 mrblr; /* maximum receive buffer length */
};
/* ucc_fast_init
* Initializes Fast UCC according to user provided parameters.
*
* uf_info - (In) pointer to the fast UCC info structure.
* uccf_ret - (Out) pointer to the fast UCC structure.
*/
int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret);
/* ucc_fast_free
* Frees all resources for fast UCC.
*
* uccf - (In) pointer to the fast UCC structure.
*/
void ucc_fast_free(struct ucc_fast_private * uccf);
/* ucc_fast_enable
* Enables a fast UCC port.
* This routine enables Tx and/or Rx through the General UCC Mode Register.
*
* uccf - (In) pointer to the fast UCC structure.
* mode - (In) TX, RX, or both.
*/
void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode);
/* ucc_fast_disable
* Disables a fast UCC port.
* This routine disables Tx and/or Rx through the General UCC Mode Register.
*
* uccf - (In) pointer to the fast UCC structure.
* mode - (In) TX, RX, or both.
*/
void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode);
/* ucc_fast_irq
* Handles interrupts on fast UCC.
* Called from the general interrupt routine to handle interrupts on fast UCC.
*
* uccf - (In) pointer to the fast UCC structure.
*/
void ucc_fast_irq(struct ucc_fast_private * uccf);
/* ucc_fast_transmit_on_demand
* Immediately forces a poll of the transmitter for data to be sent.
* Typically, the hardware performs a periodic poll for data that the
* transmit routine has set up to be transmitted. In cases where
* this polling cycle is not soon enough, this optional routine can
* be invoked to force a poll right away, instead. Proper use for
* each transmission for which this functionality is desired is to
* call the transmit routine and then this routine right after.
*
* uccf - (In) pointer to the fast UCC structure.
*/
void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf);
u32 ucc_fast_get_qe_cr_subblock(int uccf_num);
void ucc_fast_dump_regs(struct ucc_fast_private * uccf);
#endif /* __UCC_FAST_H__ */
include/asm-powerpc/ucc_slow.h 0 → 100644
View file @ 13bbd8d9
/*
* Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
*
* Description:
* Internal header file for UCC SLOW unit routines.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef __UCC_SLOW_H__
#define __UCC_SLOW_H__
#include <linux/kernel.h>
#include <asm/immap_qe.h>
#include <asm/qe.h>
#include "ucc.h"
/* transmit BD's status */
#define T_R 0x80000000 /* ready bit */
#define T_PAD 0x40000000 /* add pads to short frames */
#define T_W 0x20000000 /* wrap bit */
#define T_I 0x10000000 /* interrupt on completion */
#define T_L 0x08000000 /* last */
#define T_A 0x04000000 /* Address - the data transmitted as address
chars */
#define T_TC 0x04000000 /* transmit CRC */
#define T_CM 0x02000000 /* continuous mode */
#define T_DEF 0x02000000 /* collision on previous attempt to transmit */
#define T_P 0x01000000 /* Preamble - send Preamble sequence before
data */
#define T_HB 0x01000000 /* heartbeat */
#define T_NS 0x00800000 /* No Stop */
#define T_LC 0x00800000 /* late collision */
#define T_RL 0x00400000 /* retransmission limit */
#define T_UN 0x00020000 /* underrun */
#define T_CT 0x00010000 /* CTS lost */
#define T_CSL 0x00010000 /* carrier sense lost */
#define T_RC 0x003c0000 /* retry count */
/* Receive BD's status */
#define R_E 0x80000000 /* buffer empty */
#define R_W 0x20000000 /* wrap bit */
#define R_I 0x10000000 /* interrupt on reception */
#define R_L 0x08000000 /* last */
#define R_C 0x08000000 /* the last byte in this buffer is a cntl
char */
#define R_F 0x04000000 /* first */
#define R_A 0x04000000 /* the first byte in this buffer is address
byte */
#define R_CM 0x02000000 /* continuous mode */
#define R_ID 0x01000000 /* buffer close on reception of idles */
#define R_M 0x01000000 /* Frame received because of promiscuous
mode */
#define R_AM 0x00800000 /* Address match */
#define R_DE 0x00800000 /* Address match */
#define R_LG 0x00200000 /* Break received */
#define R_BR 0x00200000 /* Frame length violation */
#define R_NO 0x00100000 /* Rx Non Octet Aligned Packet */
#define R_FR 0x00100000 /* Framing Error (no stop bit) character
received */
#define R_PR 0x00080000 /* Parity Error character received */
#define R_AB 0x00080000 /* Frame Aborted */
#define R_SH 0x00080000 /* frame is too short */
#define R_CR 0x00040000 /* CRC Error */
#define R_OV 0x00020000 /* Overrun */
#define R_CD 0x00010000 /* CD lost */
#define R_CL 0x00010000 /* this frame is closed because of a
collision */
/* Rx Data buffer must be 4 bytes aligned in most cases.*/
#define UCC_SLOW_RX_ALIGN 4
#define UCC_SLOW_MRBLR_ALIGNMENT 4
#define UCC_SLOW_PRAM_SIZE 0x100
#define ALIGNMENT_OF_UCC_SLOW_PRAM 64
/* UCC Slow Channel Protocol Mode */
enum ucc_slow_channel_protocol_mode {
UCC_SLOW_CHANNEL_PROTOCOL_MODE_QMC = 0x00000002,
UCC_SLOW_CHANNEL_PROTOCOL_MODE_UART = 0x00000004,
UCC_SLOW_CHANNEL_PROTOCOL_MODE_BISYNC = 0x00000008,
};
/* UCC Slow Transparent Transmit CRC (TCRC) */
enum ucc_slow_transparent_tcrc {
/* 16-bit CCITT CRC (HDLC). (X16 + X12 + X5 + 1) */
UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC16 = 0x00000000,
/* CRC16 (BISYNC). (X16 + X15 + X2 + 1) */
UCC_SLOW_TRANSPARENT_TCRC_CRC16 = 0x00004000,
/* 32-bit CCITT CRC (Ethernet and HDLC) */
UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC32 = 0x00008000,
};
/* UCC Slow oversampling rate for transmitter (TDCR) */
enum ucc_slow_tx_oversampling_rate {
/* 1x clock mode */
UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_1 = 0x00000000,
/* 8x clock mode */
UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_8 = 0x00010000,
/* 16x clock mode */
UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_16 = 0x00020000,
/* 32x clock mode */
UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_32 = 0x00030000,
};
/* UCC Slow Oversampling rate for receiver (RDCR)
*/
enum ucc_slow_rx_oversampling_rate {
/* 1x clock mode */
UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_1 = 0x00000000,
/* 8x clock mode */
UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_8 = 0x00004000,
/* 16x clock mode */
UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_16 = 0x00008000,
/* 32x clock mode */
UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_32 = 0x0000c000,
};
/* UCC Slow Transmitter encoding method (TENC)
*/
enum ucc_slow_tx_encoding_method {
UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZ = 0x00000000,
UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZI = 0x00000100
};
/* UCC Slow Receiver decoding method (RENC)
*/
enum ucc_slow_rx_decoding_method {
UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZ = 0x00000000,
UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZI = 0x00000800
};
/* UCC Slow Diagnostic mode (DIAG)
*/
enum ucc_slow_diag_mode {
UCC_SLOW_DIAG_MODE_NORMAL = 0x00000000,
UCC_SLOW_DIAG_MODE_LOOPBACK = 0x00000040,
UCC_SLOW_DIAG_MODE_ECHO = 0x00000080,
UCC_SLOW_DIAG_MODE_LOOPBACK_ECHO = 0x000000c0
};
struct ucc_slow_info {
int ucc_num;
enum qe_clock rx_clock;
enum qe_clock tx_clock;
struct ucc_slow *us_regs;
int irq;
u16 uccm_mask;
int data_mem_part;
int init_tx;
int init_rx;
u32 tx_bd_ring_len;
u32 rx_bd_ring_len;
int rx_interrupts;
int brkpt_support;
int grant_support;
int tsa;
int cdp;
int cds;
int ctsp;
int ctss;
int rinv;
int tinv;
int rtsm;
int rfw;
int tci;
int tend;
int tfl;
int txsy;
u16 max_rx_buf_length;
enum ucc_slow_transparent_tcrc tcrc;
enum ucc_slow_channel_protocol_mode mode;
enum ucc_slow_diag_mode diag;
enum ucc_slow_tx_oversampling_rate tdcr;
enum ucc_slow_rx_oversampling_rate rdcr;
enum ucc_slow_tx_encoding_method tenc;
enum ucc_slow_rx_decoding_method renc;
};
struct ucc_slow_private {
struct ucc_slow_info *us_info;
struct ucc_slow *us_regs; /* a pointer to memory map of UCC regs */
struct ucc_slow_pram *us_pram; /* a pointer to the parameter RAM */
u32 us_pram_offset;
int enabled_tx; /* Whether channel is enabled for Tx (ENT) */
int enabled_rx; /* Whether channel is enabled for Rx (ENR) */
int stopped_tx; /* Whether channel has been stopped for Tx
(STOP_TX, etc.) */
int stopped_rx; /* Whether channel has been stopped for Rx */
struct list_head confQ; /* frames passed to chip waiting for tx */
u32 first_tx_bd_mask; /* mask is used in Tx routine to save status
and length for first BD in a frame */
u32 tx_base_offset; /* first BD in Tx BD table offset (In MURAM) */
u32 rx_base_offset; /* first BD in Rx BD table offset (In MURAM) */
u8 *confBd; /* next BD for confirm after Tx */
u8 *tx_bd; /* next BD for new Tx request */
u8 *rx_bd; /* next BD to collect after Rx */
void *p_rx_frame; /* accumulating receive frame */
u16 *p_ucce; /* a pointer to the event register in memory.
*/
u16 *p_uccm; /* a pointer to the mask register in memory */
u16 saved_uccm; /* a saved mask for the RX Interrupt bits */
#ifdef STATISTICS
u32 tx_frames; /* Transmitted frames counters */
u32 rx_frames; /* Received frames counters (only frames
passed to application) */
u32 rx_discarded; /* Discarded frames counters (frames that
were discarded by the driver due to
errors) */
#endif /* STATISTICS */
};
/* ucc_slow_init
* Initializes Slow UCC according to provided parameters.
*
* us_info - (In) pointer to the slow UCC info structure.
* uccs_ret - (Out) pointer to the slow UCC structure.
*/
int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret);
/* ucc_slow_free
* Frees all resources for slow UCC.
*
* uccs - (In) pointer to the slow UCC structure.
*/
void ucc_slow_free(struct ucc_slow_private * uccs);
/* ucc_slow_enable
* Enables a fast UCC port.
* This routine enables Tx and/or Rx through the General UCC Mode Register.
*
* uccs - (In) pointer to the slow UCC structure.
* mode - (In) TX, RX, or both.
*/
void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode);
/* ucc_slow_disable
* Disables a fast UCC port.
* This routine disables Tx and/or Rx through the General UCC Mode Register.
*
* uccs - (In) pointer to the slow UCC structure.
* mode - (In) TX, RX, or both.
*/
void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode);
/* ucc_slow_poll_transmitter_now
* Immediately forces a poll of the transmitter for data to be sent.
* Typically, the hardware performs a periodic poll for data that the
* transmit routine has set up to be transmitted. In cases where
* this polling cycle is not soon enough, this optional routine can
* be invoked to force a poll right away, instead. Proper use for
* each transmission for which this functionality is desired is to
* call the transmit routine and then this routine right after.
*
* uccs - (In) pointer to the slow UCC structure.
*/
void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs);
/* ucc_slow_graceful_stop_tx
* Smoothly stops transmission on a specified slow UCC.
*
* uccs - (In) pointer to the slow UCC structure.
*/
void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs);
/* ucc_slow_stop_tx
* Stops transmission on a specified slow UCC.
*
* uccs - (In) pointer to the slow UCC structure.
*/
void ucc_slow_stop_tx(struct ucc_slow_private * uccs);
/* ucc_slow_restart_x
* Restarts transmitting on a specified slow UCC.
*
* uccs - (In) pointer to the slow UCC structure.
*/
void ucc_slow_restart_x(struct ucc_slow_private * uccs);
u32 ucc_slow_get_qe_cr_subblock(int uccs_num);
#endif /* __UCC_SLOW_H__ */
include/asm-powerpc/xmon.h
View file @ 13bbd8d9
#ifndef __PPC_XMON_H
#define __PPC_XMON_H
#ifdef __KERNEL__
#ifndef __ASM_POWERPC_XMON_H
#define __ASM_POWERPC_XMON_H
struct pt_regs;
/*
* Copyrignt (C) 2006 IBM Corp
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
extern int xmon(struct pt_regs *excp);
extern void xmon_printf(const char *fmt, ...);
extern void xmon_init(int);
#ifdef __KERNEL__
#ifdef CONFIG_XMON
extern void xmon_setup(void);
#else
static inline void xmon_setup(void) { };
#endif
#endif
#endif /* __KERNEL __ */
#endif /* __ASM_POWERPC_XMON_H */
include/linux/fsl_devices.h
View file @ 13bbd8d9
......@@ -46,18 +46,17 @@
struct gianfar_platform_data {
/* device specific information */
u32 device_flags;
u32 device_flags;
/* board specific information */
u32 board_flags;
u32 bus_id;
u32 phy_id;
u8 mac_addr[6];
u32 board_flags;
u32 bus_id;
u32 phy_id;
u8 mac_addr[6];
};
struct gianfar_mdio_data {
/* board specific information */
int irq[32];
int irq[32];
};
/* Flags related to gianfar device features */
......@@ -76,14 +75,13 @@ struct gianfar_mdio_data {
struct fsl_i2c_platform_data {
/* device specific information */
u32 device_flags;
u32 device_flags;
};
/* Flags related to I2C device features */
#define FSL_I2C_DEV_SEPARATE_DFSRR 0x00000001
#define FSL_I2C_DEV_CLOCK_5200 0x00000002
enum fsl_usb2_operating_modes {
FSL_USB2_MPH_HOST,
FSL_USB2_DR_HOST,
......@@ -101,9 +99,9 @@ enum fsl_usb2_phy_modes {
struct fsl_usb2_platform_data {
/* board specific information */
enum fsl_usb2_operating_modes operating_mode;
enum fsl_usb2_phy_modes phy_mode;
unsigned int port_enables;
enum fsl_usb2_operating_modes operating_mode;
enum fsl_usb2_phy_modes phy_mode;
unsigned int port_enables;
};
/* Flags in fsl_usb2_mph_platform_data */
......@@ -121,5 +119,44 @@ struct fsl_spi_platform_data {
u32 sysclk;
};
#endif /* _FSL_DEVICE_H_ */
#endif /* __KERNEL__ */
/* Ethernet interface (phy management and speed)
*/
enum enet_interface {
ENET_10_MII, /* 10 Base T, MII interface */
ENET_10_RMII, /* 10 Base T, RMII interface */
ENET_10_RGMII, /* 10 Base T, RGMII interface */
ENET_100_MII, /* 100 Base T, MII interface */
ENET_100_RMII, /* 100 Base T, RMII interface */
ENET_100_RGMII, /* 100 Base T, RGMII interface */
ENET_1000_GMII, /* 1000 Base T, GMII interface */
ENET_1000_RGMII, /* 1000 Base T, RGMII interface */
ENET_1000_TBI, /* 1000 Base T, TBI interface */
ENET_1000_RTBI /* 1000 Base T, RTBI interface */
};
struct ucc_geth_platform_data {
/* device specific information */
u32 device_flags;
u32 phy_reg_addr;
/* board specific information */
u32 board_flags;
u8 rx_clock;
u8 tx_clock;
u32 phy_id;
enum enet_interface phy_interface;
u32 phy_interrupt;
u8 mac_addr[6];
};
/* Flags related to UCC Gigabit Ethernet device features */
#define FSL_UGETH_DEV_HAS_GIGABIT 0x00000001
#define FSL_UGETH_DEV_HAS_COALESCE 0x00000002
#define FSL_UGETH_DEV_HAS_RMON 0x00000004
/* Flags in ucc_geth_platform_data */
#define FSL_UGETH_BRD_HAS_PHY_INTR 0x00000001
/* if not set use a timer */
#endif /* _FSL_DEVICE_H_ */
#endif /* __KERNEL__ */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7