ARM: remove support for mxc91231

Since support for mxc91231 was introduced 2009 it only saw patches that
were part of (mxc or arm) global cleanups. The only supported machine
only had 4 devices (2x UART, sdhc, watchdog).

Cc: Dmitriy Taychenachev <dimichxp@gmail.com>
LAKML-Reference: 1302211482-17926-1-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arch/arm/Makefile

@@ -160,7 +160,6 @@ machine-$(CONFIG_ARCH_MX2)		:= imx
 machine-$(CONFIG_ARCH_MX25)		:= imx
 machine-$(CONFIG_ARCH_MX3)		:= mx3
 machine-$(CONFIG_ARCH_MX5)		:= mx5
-machine-$(CONFIG_ARCH_MXC91231)		:= mxc91231
 machine-$(CONFIG_ARCH_MXS)		:= mxs
 machine-$(CONFIG_ARCH_NETX)		:= netx
 machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik

arch/arm/mach-mxc91231/Kconfig

-if ARCH_MXC91231
-
-comment "MXC91231 platforms:"
-
-config MACH_MAGX_ZN5
-	bool "Support Motorola Zn5 GSM phone"
-	default n
-	help
-	  Include support for Motorola Zn5 GSM phone.
-
-endif

arch/arm/mach-mxc91231/Makefile

-obj-y	:= mm.o clock.o devices.o system.o iomux.o
-obj-$(CONFIG_MACH_MAGX_ZN5) += magx-zn5.o

arch/arm/mach-mxc91231/Makefile.boot

-   zreladdr-y	:= 0x90008000
-params_phys-y	:= 0x90000100
-initrd_phys-y	:= 0x90800000

arch/arm/mach-mxc91231/devices.c

-/*
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA  02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/gpio.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/imx-uart.h>
-
-static struct resource uart0[] = {
-	{
-		.start = MXC91231_UART1_BASE_ADDR,
-		.end = MXC91231_UART1_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC91231_INT_UART1_RX,
-		.end = MXC91231_INT_UART1_RX,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.start = MXC91231_INT_UART1_TX,
-		.end = MXC91231_INT_UART1_TX,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.start = MXC91231_INT_UART1_MINT,
-		.end = MXC91231_INT_UART1_MINT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device0 = {
-	.name = "imx-uart",
-	.id = 0,
-	.resource = uart0,
-	.num_resources = ARRAY_SIZE(uart0),
-};
-
-static struct resource uart1[] = {
-	{
-		.start = MXC91231_UART2_BASE_ADDR,
-		.end = MXC91231_UART2_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC91231_INT_UART2_RX,
-		.end = MXC91231_INT_UART2_RX,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.start = MXC91231_INT_UART2_TX,
-		.end = MXC91231_INT_UART2_TX,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.start = MXC91231_INT_UART2_MINT,
-		.end = MXC91231_INT_UART2_MINT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device1 = {
-	.name = "imx-uart",
-	.id = 1,
-	.resource = uart1,
-	.num_resources = ARRAY_SIZE(uart1),
-};
-
-static struct resource uart2[] = {
-	{
-		.start = MXC91231_UART3_BASE_ADDR,
-		.end = MXC91231_UART3_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC91231_INT_UART3_RX,
-		.end = MXC91231_INT_UART3_RX,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.start = MXC91231_INT_UART3_TX,
-		.end = MXC91231_INT_UART3_TX,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.start = MXC91231_INT_UART3_MINT,
-		.end = MXC91231_INT_UART3_MINT,
-		.flags = IORESOURCE_IRQ,
-
-	},
-};
-
-struct platform_device mxc_uart_device2 = {
-	.name = "imx-uart",
-	.id = 2,
-	.resource = uart2,
-	.num_resources = ARRAY_SIZE(uart2),
-};
-
-/* GPIO port description */
-static struct mxc_gpio_port mxc_gpio_ports[] = {
-	[0] = {
-		.chip.label = "gpio-0",
-		.base = MXC91231_IO_ADDRESS(MXC91231_GPIO1_AP_BASE_ADDR),
-		.irq = MXC91231_INT_GPIO1,
-		.virtual_irq_start = MXC_GPIO_IRQ_START,
-	},
-	[1] = {
-		.chip.label = "gpio-1",
-		.base = MXC91231_IO_ADDRESS(MXC91231_GPIO2_AP_BASE_ADDR),
-		.irq = MXC91231_INT_GPIO2,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
-	},
-	[2] = {
-		.chip.label = "gpio-2",
-		.base = MXC91231_IO_ADDRESS(MXC91231_GPIO3_AP_BASE_ADDR),
-		.irq = MXC91231_INT_GPIO3,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
-	},
-	[3] = {
-		.chip.label = "gpio-3",
-		.base = MXC91231_IO_ADDRESS(MXC91231_GPIO4_SH_BASE_ADDR),
-		.irq = MXC91231_INT_GPIO4,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
-	},
-};
-
-int __init mxc91231_register_gpios(void)
-{
-	return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
-}
-
-static struct resource mxc_nand_resources[] = {
-	{
-		.start	= MXC91231_NFC_BASE_ADDR,
-		.end	= MXC91231_NFC_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM
-	}, {
-		.start	= MXC91231_INT_NANDFC,
-		.end	= MXC91231_INT_NANDFC,
-		.flags	= IORESOURCE_IRQ
-	},
-};
-
-struct platform_device mxc_nand_device = {
-	.name = "mxc_nand",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_nand_resources),
-	.resource = mxc_nand_resources,
-};
-
-static struct resource mxc_sdhc0_resources[] = {
-	{
-		.start = MXC91231_MMC_SDHC1_BASE_ADDR,
-		.end = MXC91231_MMC_SDHC1_BASE_ADDR + SZ_16K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC91231_INT_MMC_SDHC1,
-		.end = MXC91231_INT_MMC_SDHC1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource mxc_sdhc1_resources[] = {
-	{
-		.start = MXC91231_MMC_SDHC2_BASE_ADDR,
-		.end = MXC91231_MMC_SDHC2_BASE_ADDR + SZ_16K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC91231_INT_MMC_SDHC2,
-		.end = MXC91231_INT_MMC_SDHC2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_sdhc_device0 = {
-	.name = "mxc-mmc",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_sdhc0_resources),
-	.resource = mxc_sdhc0_resources,
-};
-
-struct platform_device mxc_sdhc_device1 = {
-	.name = "mxc-mmc",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(mxc_sdhc1_resources),
-	.resource = mxc_sdhc1_resources,
-};
-
-static struct resource mxc_cspi0_resources[] = {
-	{
-		.start = MXC91231_CSPI1_BASE_ADDR,
-		.end = MXC91231_CSPI1_BASE_ADDR + 0x20,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC91231_INT_CSPI1,
-		.end = MXC91231_INT_CSPI1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_cspi_device0 = {
-	.name = "spi_imx",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_cspi0_resources),
-	.resource = mxc_cspi0_resources,
-};
-
-static struct resource mxc_cspi1_resources[] = {
-	{
-		.start = MXC91231_CSPI2_BASE_ADDR,
-		.end = MXC91231_CSPI2_BASE_ADDR + 0x20,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC91231_INT_CSPI2,
-		.end = MXC91231_INT_CSPI2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_cspi_device1 = {
-	.name = "spi_imx",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(mxc_cspi1_resources),
-	.resource = mxc_cspi1_resources,
-};
-
-static struct resource mxc_wdog0_resources[] = {
-	{
-		.start = MXC91231_WDOG1_BASE_ADDR,
-		.end = MXC91231_WDOG1_BASE_ADDR + 0x10,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device mxc_wdog_device0 = {
-	.name = "mxc-wdt",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_wdog0_resources),
-	.resource = mxc_wdog0_resources,
-};

arch/arm/mach-mxc91231/devices.h

-extern struct platform_device mxc_uart_device0;
-extern struct platform_device mxc_uart_device1;
-extern struct platform_device mxc_uart_device2;
-
-extern struct platform_device mxc_nand_device;
-
-extern struct platform_device mxc_sdhc_device0;
-extern struct platform_device mxc_sdhc_device1;
-
-extern struct platform_device mxc_cspi_device0;
-extern struct platform_device mxc_cspi_device1;
-
-extern struct platform_device mxc_wdog_device0;

arch/arm/mach-mxc91231/iomux.c

-/*
- * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <mach/hardware.h>
-#include <mach/gpio.h>
-#include <mach/iomux-mxc91231.h>
-
-/*
- * IOMUX register (base) addresses
- */
-#define IOMUX_AP_BASE		MXC91231_IO_ADDRESS(MXC91231_IOMUX_AP_BASE_ADDR)
-#define IOMUX_COM_BASE		MXC91231_IO_ADDRESS(MXC91231_IOMUX_COM_BASE_ADDR)
-#define IOMUXSW_AP_MUX_CTL	(IOMUX_AP_BASE + 0x000)
-#define IOMUXSW_SP_MUX_CTL	(IOMUX_COM_BASE + 0x000)
-#define IOMUXSW_PAD_CTL		(IOMUX_COM_BASE + 0x200)
-
-#define IOMUXINT_OBS1		(IOMUX_AP_BASE + 0x600)
-#define IOMUXINT_OBS2		(IOMUX_AP_BASE + 0x004)
-
-static DEFINE_SPINLOCK(gpio_mux_lock);
-
-#define NB_PORTS			((PIN_MAX + 32) / 32)
-#define PIN_GLOBAL_NUM(pin) \
-	(((pin & MUX_SIDE_MASK) >> MUX_SIDE_SHIFT)*PIN_AP_MAX +	\
-	 ((pin & MUX_REG_MASK) >> MUX_REG_SHIFT)*4 +		\
-	 ((pin & MUX_FIELD_MASK) >> MUX_FIELD_SHIFT))
-
-unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG];
-/*
- * set the mode for a IOMUX pin.
- */
-int mxc_iomux_mode(unsigned int pin_mode)
-{
-	u32 side, field, l, mode, ret = 0;
-	void __iomem *reg;
-
-	side = (pin_mode & MUX_SIDE_MASK) >> MUX_SIDE_SHIFT;
-	switch (side) {
-	case MUX_SIDE_AP:
-		reg = IOMUXSW_AP_MUX_CTL;
-		break;
-	case MUX_SIDE_SP:
-		reg = IOMUXSW_SP_MUX_CTL;
-		break;
-	default:
-		return -EINVAL;
-	}
-	reg += ((pin_mode & MUX_REG_MASK) >> MUX_REG_SHIFT) * 4;
-	field = (pin_mode & MUX_FIELD_MASK) >> MUX_FIELD_SHIFT;
-	mode = (pin_mode & MUX_MODE_MASK) >> MUX_MODE_SHIFT;
-
-	spin_lock(&gpio_mux_lock);
-
-	l = __raw_readl(reg);
-	l &= ~(0xff << (field * 8));
-	l |= mode << (field * 8);
-	__raw_writel(l, reg);
-
-	spin_unlock(&gpio_mux_lock);
-
-	return ret;
-}
-EXPORT_SYMBOL(mxc_iomux_mode);
-
-/*
- * This function configures the pad value for a IOMUX pin.
- */
-void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
-{
-	u32 padgrp, field, l;
-	void __iomem *reg;
-
-	padgrp = (pin & MUX_PADGRP_MASK) >> MUX_PADGRP_SHIFT;
-	reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4;
-	field = (pin + 2) % 3;
-
-	pr_debug("%s: reg offset = 0x%x, field = %d\n",
-			__func__, (pin + 2) / 3, field);
-
-	spin_lock(&gpio_mux_lock);
-
-	l = __raw_readl(reg);
-	l &= ~(0x1ff << (field * 10));
-	l |= config << (field * 10);
-	__raw_writel(l, reg);
-
-	spin_unlock(&gpio_mux_lock);
-}
-EXPORT_SYMBOL(mxc_iomux_set_pad);
-
-/*
- * allocs a single pin:
- * 	- reserves the pin so that it is not claimed by another driver
- * 	- setups the iomux according to the configuration
- */
-int mxc_iomux_alloc_pin(unsigned int pin_mode, const char *label)
-{
-	unsigned pad = PIN_GLOBAL_NUM(pin_mode);
-	if (pad >= (PIN_MAX + 1)) {
-		printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
-			pad, label ? label : "?");
-		return -EINVAL;
-	}
-
-	if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
-		printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
-			pad, label ? label : "?");
-		return -EBUSY;
-	}
-	mxc_iomux_mode(pin_mode);
-
-	return 0;
-}
-EXPORT_SYMBOL(mxc_iomux_alloc_pin);
-
-int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
-		const char *label)
-{
-	const unsigned int *p = pin_list;
-	int i;
-	int ret = -EINVAL;
-
-	for (i = 0; i < count; i++) {
-		ret = mxc_iomux_alloc_pin(*p, label);
-		if (ret)
-			goto setup_error;
-		p++;
-	}
-	return 0;
-
-setup_error:
-	mxc_iomux_release_multiple_pins(pin_list, i);
-	return ret;
-}
-EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
-
-void mxc_iomux_release_pin(unsigned int pin_mode)
-{
-	unsigned pad = PIN_GLOBAL_NUM(pin_mode);
-
-	if (pad < (PIN_MAX + 1))
-		clear_bit(pad, mxc_pin_alloc_map);
-}
-EXPORT_SYMBOL(mxc_iomux_release_pin);
-
-void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count)
-{
-	const unsigned int *p = pin_list;
-	int i;
-
-	for (i = 0; i < count; i++) {
-		mxc_iomux_release_pin(*p);
-		p++;
-	}
-}
-EXPORT_SYMBOL(mxc_iomux_release_multiple_pins);

arch/arm/mach-mxc91231/magx-zn5.c

-/*
- * Copyright 2009 Dmitriy Taychenachev <dimichxp@gmail.com>
- *
- * This file is released under the GPLv2 or later.
- */
-
-#include <linux/irq.h>
-#include <linux/init.h>
-#include <linux/device.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/time.h>
-#include <asm/mach/arch.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mxc91231.h>
-#include <mach/mmc.h>
-#include <mach/imx-uart.h>
-
-#include "devices.h"
-
-static struct imxuart_platform_data uart_pdata = {
-};
-
-static struct imxmmc_platform_data sdhc_pdata = {
-};
-
-static void __init zn5_init(void)
-{
-	pm_power_off = mxc91231_power_off;
-
-	mxc_iomux_alloc_pin(MXC91231_PIN_SP_USB_DAT_VP__RXD2, "uart2-rx");
-	mxc_iomux_alloc_pin(MXC91231_PIN_SP_USB_SE0_VM__TXD2, "uart2-tx");
-
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
-	mxc_register_device(&mxc_sdhc_device0, &sdhc_pdata);
-
-	mxc_register_device(&mxc_wdog_device0, NULL);
-
-	return;
-}
-
-static void __init zn5_timer_init(void)
-{
-	mxc91231_clocks_init(26000000); /* 26mhz ckih */
-}
-
-struct sys_timer zn5_timer = {
-	.init = zn5_timer_init,
-};
-
-MACHINE_START(MAGX_ZN5, "Motorola Zn5")
-	.boot_params = MXC91231_PHYS_OFFSET + 0x100,
-	.map_io = mxc91231_map_io,
-	.init_early = mxc91231_init_early,
-	.init_irq = mxc91231_init_irq,
-	.timer = &zn5_timer,
-	.init_machine = zn5_init,
-MACHINE_END

arch/arm/mach-mxc91231/mm.c

-/*
- *  Copyright (C) 1999,2000 Arm Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright 2004-2005 Freescale Semiconductor, Inc. All Rights Reserved.
- *    - add MXC specific definitions
- *  Copyright 2006 Motorola, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-
-/*
- * This structure defines the MXC memory map.
- */
-static struct map_desc mxc91231_io_desc[] __initdata = {
-	imx_map_entry(MXC91231, L2CC, MT_DEVICE),
-	imx_map_entry(MXC91231, X_MEMC, MT_DEVICE),
-	imx_map_entry(MXC91231, ROMP, MT_DEVICE),
-	imx_map_entry(MXC91231, AVIC, MT_DEVICE),
-	imx_map_entry(MXC91231, AIPS1, MT_DEVICE),
-	imx_map_entry(MXC91231, SPBA0, MT_DEVICE),
-	imx_map_entry(MXC91231, SPBA1, MT_DEVICE),
-	imx_map_entry(MXC91231, AIPS2, MT_DEVICE),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory map for
- * the IO modules.
- */
-void __init mxc91231_map_io(void)
-{
-	iotable_init(mxc91231_io_desc, ARRAY_SIZE(mxc91231_io_desc));
-}
-
-void __init mxc91231_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MXC91231);
-}
-
-int mxc91231_register_gpios(void);
-
-void __init mxc91231_init_irq(void)
-{
-	mxc91231_register_gpios();
-	mxc_init_irq(MXC91231_IO_ADDRESS(MXC91231_AVIC_BASE_ADDR));
-}

arch/arm/mach-mxc91231/system.c

-/*
- * Copyright 2009 Dmitriy Taychenachev <dimichxp@gmail.com>
- *
- * This file is released under the GPLv2 or later.
- */
-
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <asm/proc-fns.h>
-#include <mach/hardware.h>
-
-#include "crm_regs.h"
-
-#define WDOG_WCR		MXC91231_IO_ADDRESS(MXC91231_WDOG1_BASE_ADDR)
-#define WDOG_WCR_OUT_ENABLE	(1 << 6)
-#define WDOG_WCR_ASSERT		(1 << 5)
-
-void mxc91231_power_off(void)
-{
-	u16 wcr;
-
-	wcr = __raw_readw(WDOG_WCR);
-	wcr |= WDOG_WCR_OUT_ENABLE;
-	wcr &= ~WDOG_WCR_ASSERT;
-	__raw_writew(wcr, WDOG_WCR);
-}
-
-void mxc91231_arch_reset(char mode, const char *cmd)
-{
-	u32 amcr;
-
-	/* Reset the AP using CRM */
-	amcr = __raw_readl(MXC_CRMAP_AMCR);
-	amcr &= ~MXC_CRMAP_AMCR_SW_AP;
-	__raw_writel(amcr, MXC_CRMAP_AMCR);
-
-	mdelay(10);
-	cpu_reset(0);
-}
-
-void mxc91231_prepare_idle(void)
-{
-	u32 crm_ctl;
-
-	/* Go to WAIT mode after WFI */
-	crm_ctl = __raw_readl(MXC_DSM_CRM_CONTROL);
-	crm_ctl &= ~(MXC_DSM_CRM_CTRL_LPMD0 | MXC_DSM_CRM_CTRL_LPMD1);
-	crm_ctl |=  MXC_DSM_CRM_CTRL_LPMD_WAIT_MODE;
-	__raw_writel(crm_ctl, MXC_DSM_CRM_CONTROL);
-}

arch/arm/plat-mxc/Kconfig

@@ -30,13 +30,6 @@ config ARCH_MX3
 	help
 	  This enables support for systems based on the Freescale i.MX3 family
 
-config ARCH_MXC91231
-	bool "MXC91231-based"
-	select CPU_V6
-	select MXC_AVIC
-	help
-	  This enables support for systems based on the Freescale MXC91231 family
-
 config ARCH_MX5
 	bool "MX5-based"
 	select CPU_V7
@@ -48,7 +41,6 @@ endchoice
 
 source "arch/arm/mach-imx/Kconfig"
 source "arch/arm/mach-mx3/Kconfig"
-source "arch/arm/mach-mxc91231/Kconfig"
 source "arch/arm/mach-mx5/Kconfig"
 
 endmenu

arch/arm/plat-mxc/include/mach/common.h

@@ -23,7 +23,6 @@ extern void mx35_map_io(void);
 extern void mx50_map_io(void);
 extern void mx51_map_io(void);
 extern void mx53_map_io(void);
-extern void mxc91231_map_io(void);
 extern void imx1_init_early(void);
 extern void imx21_init_early(void);
 extern void imx25_init_early(void);
@@ -33,7 +32,6 @@ extern void imx35_init_early(void);
 extern void imx50_init_early(void);
 extern void imx51_init_early(void);
 extern void imx53_init_early(void);
-extern void mxc91231_init_early(void);
 extern void mxc_init_irq(void __iomem *);
 extern void tzic_init_irq(void __iomem *);
 extern void mx1_init_irq(void);
@@ -45,7 +43,6 @@ extern void mx35_init_irq(void);
 extern void mx50_init_irq(void);
 extern void mx51_init_irq(void);
 extern void mx53_init_irq(void);
-extern void mxc91231_init_irq(void);
 extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq);
 extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
@@ -58,14 +55,10 @@ extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
 			unsigned long ckih1, unsigned long ckih2);
 extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
 			unsigned long ckih1, unsigned long ckih2);
-extern int mxc91231_clocks_init(unsigned long fref);
 extern int mxc_register_gpios(void);
 extern int mxc_register_device(struct platform_device *pdev, void *data);
 extern void mxc_set_cpu_type(unsigned int type);
 extern void mxc_arch_reset_init(void __iomem *);
-extern void mxc91231_power_off(void);
-extern void mxc91231_arch_reset(int, const char *);
-extern void mxc91231_prepare_idle(void);
 extern void mx51_efikamx_reset(void);
 extern int mx53_revision(void);
 extern int mx53_display_revision(void);

arch/arm/plat-mxc/include/mach/debug-macro.S

@@ -44,13 +44,6 @@
 #define UART_PADDR	MX51_UART1_BASE_ADDR
 #endif
 
-#ifdef CONFIG_ARCH_MXC91231
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
-#define UART_PADDR	MXC91231_UART2_BASE_ADDR
-#endif
-
 #define UART_VADDR	IMX_IO_ADDRESS(UART_PADDR)
 
 		.macro	addruart, rp, rv

arch/arm/plat-mxc/include/mach/hardware.h

@@ -86,15 +86,6 @@
  *	SPBA0	0x70000000+0x100000	->	0xf5400000+0x100000
  *	AIPS1	0x73f00000+0x100000	->	0xf5700000+0x100000
  *	AIPS2	0x83f00000+0x100000	->	0xf4300000+0x100000
- * mxc91231:
- *	L2CC	0x30000000+0x010000	->	0xf4400000+0x010000
- *	X_MEMC	0xb8000000+0x010000	->	0xf4c00000+0x010000
- *	ROMP	0x60000000+0x010000	->	0xf5000000+0x010000
- *	AVIC	0x68000000+0x010000	->	0xf5800000+0x010000
- *	AIPS1	0x43f00000+0x100000	->	0xf5300000+0x100000
- *	SPBA0	0x50000000+0x100000	->	0xf5400000+0x100000
- *	SPBA1	0x52000000+0x100000	->	0xf5600000+0x100000
- *	AIPS2	0x53f00000+0x100000	->	0xf5700000+0x100000
  */
 #define IMX_IO_P2V(x)	(						\
 			0xf4000000 +					\
@@ -134,10 +125,6 @@
 # include <mach/mx25.h>
 #endif
 
-#ifdef CONFIG_ARCH_MXC91231
-# include <mach/mxc91231.h>
-#endif
-
 #include <mach/mxc.h>
 
 #define imx_map_entry(soc, name, _type)	{				\

arch/arm/plat-mxc/include/mach/irqs.h

@@ -35,8 +35,6 @@
 #define MXC_GPIO_IRQS		(32 * 4)
 #elif defined CONFIG_SOC_IMX51
 #define MXC_GPIO_IRQS		(32 * 4)
-#elif defined CONFIG_ARCH_MXC91231
-#define MXC_GPIO_IRQS		(32 * 4)
 #elif defined CONFIG_ARCH_MX3
 #define MXC_GPIO_IRQS		(32 * 3)
 #endif

arch/arm/plat-mxc/include/mach/memory.h

@@ -19,7 +19,6 @@
 #define MX50_PHYS_OFFSET	UL(0x70000000)
 #define MX51_PHYS_OFFSET	UL(0x90000000)
 #define MX53_PHYS_OFFSET	UL(0x70000000)
-#define MXC91231_PHYS_OFFSET	UL(0x90000000)
 
 #if !defined(CONFIG_RUNTIME_PHYS_OFFSET)
 # if defined CONFIG_ARCH_MX1
@@ -32,8 +31,6 @@
 #  define PLAT_PHYS_OFFSET		MX27_PHYS_OFFSET
 # elif defined CONFIG_ARCH_MX3
 #  define PLAT_PHYS_OFFSET		MX3x_PHYS_OFFSET
-# elif defined CONFIG_ARCH_MXC91231
-#  define PLAT_PHYS_OFFSET		MXC91231_PHYS_OFFSET
 # elif defined CONFIG_ARCH_MX50
 #  define PLAT_PHYS_OFFSET		MX50_PHYS_OFFSET
 # elif defined CONFIG_ARCH_MX51

arch/arm/plat-mxc/include/mach/mxc.h

@@ -35,7 +35,6 @@
 #define MXC_CPU_MX50		50
 #define MXC_CPU_MX51		51
 #define MXC_CPU_MX53		53
-#define MXC_CPU_MXC91231	91231
 
 #define IMX_CHIP_REVISION_1_0		0x10
 #define IMX_CHIP_REVISION_1_1		0x11
@@ -177,18 +176,6 @@ extern unsigned int __mxc_cpu_type;
 # define cpu_is_mx53()		(0)
 #endif
 
-#ifdef CONFIG_ARCH_MXC91231
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MXC91231
-# endif
-# define cpu_is_mxc91231()	(mxc_cpu_type == MXC_CPU_MXC91231)
-#else
-# define cpu_is_mxc91231()	(0)
-#endif
-
 #ifndef __ASSEMBLY__
 
 struct cpu_op {
@@ -214,7 +201,7 @@ extern struct cpu_op *(*get_cpu_op)(int *op);
 #define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x8))
 #endif
 
-#define cpu_is_mx3()	(cpu_is_mx31() || cpu_is_mx35() || cpu_is_mxc91231())
+#define cpu_is_mx3()	(cpu_is_mx31() || cpu_is_mx35())
 #define cpu_is_mx2()	(cpu_is_mx21() || cpu_is_mx27())
 
 #endif /*  __ASM_ARCH_MXC_H__ */

arch/arm/plat-mxc/include/mach/system.h

@@ -24,12 +24,6 @@ extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode);
 
 static inline void arch_idle(void)
 {
-#ifdef CONFIG_ARCH_MXC91231
-	if (cpu_is_mxc91231()) {
-		/* Need this to set DSM low-power mode */
-		mxc91231_prepare_idle();
-	}
-#endif
 	/* fix i.MX31 errata TLSbo65953 and i.MX35 errata ENGcm09472 */
 	if (cpu_is_mx31() || cpu_is_mx35()) {
 		unsigned long reg = 0;

arch/arm/plat-mxc/include/mach/timex.h

@@ -26,8 +26,6 @@
 #define CLOCK_TICK_RATE		16000000
 #elif defined CONFIG_ARCH_MX5
 #define CLOCK_TICK_RATE		8000000
-#elif defined CONFIG_ARCH_MXC91231
-#define CLOCK_TICK_RATE		13000000
 #endif
 
 #endif				/* __ASM_ARCH_MXC_TIMEX_H__ */

arch/arm/plat-mxc/system.c

@@ -37,12 +37,6 @@ void arch_reset(char mode, const char *cmd)
 {
 	unsigned int wcr_enable;
 
-#ifdef CONFIG_ARCH_MXC91231
-	if (cpu_is_mxc91231()) {
-		mxc91231_arch_reset(mode, cmd);
-		return;
-	}
-#endif
 #ifdef CONFIG_MACH_MX51_EFIKAMX
 	if (machine_is_mx51_efikamx()) {
 		mx51_efikamx_reset();

arch/arm/plat-mxc/time.c

@@ -54,7 +54,7 @@
 #define MX2_TSTAT_CAPT		(1 << 1)
 #define MX2_TSTAT_COMP		(1 << 0)
 
-/* MX31, MX35, MX25, MXC91231, MX5 */
+/* MX31, MX35, MX25, MX5 */
 #define V2_TCTL_WAITEN		(1 << 3) /* Wait enable mode */
 #define V2_TCTL_CLK_IPG		(1 << 6)
 #define V2_TCTL_FRR		(1 << 9)