Commit 1416b547 authored by Lucas De Marchi's avatar Lucas De Marchi

drm/i915/gt: Extract per-platform function for frequency read

Instead of calling read_clock_frequency() to walk the if/else ladder
per platform, move the ladder to intel_gt_init_clock_frequency() and
use one function per branch.

With the new logic, it's now clear the call to
gen9_get_crystal_clock_freq() was just dead code, as gen9 is handled by
another function and there is no version 10. Remove that function and
the caller.

v2: Correctly handle intel_gt_check_clock_frequency() that also calls
the function to read clock frequency (Gustavo)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: default avatarLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: default avatarGustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908-if-ladder-v2-2-7a7b15545c93@intel.com
parent 29a051bd
......@@ -26,26 +26,6 @@ static u32 read_reference_ts_freq(struct intel_uncore *uncore)
return base_freq + frac_freq;
}
static u32 gen9_get_crystal_clock_freq(struct intel_uncore *uncore,
u32 rpm_config_reg)
{
u32 f19_2_mhz = 19200000;
u32 f24_mhz = 24000000;
u32 crystal_clock =
(rpm_config_reg & GEN9_RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_MASK) >>
GEN9_RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_SHIFT;
switch (crystal_clock) {
case GEN9_RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_19_2_MHZ:
return f19_2_mhz;
case GEN9_RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_24_MHZ:
return f24_mhz;
default:
MISSING_CASE(crystal_clock);
return 0;
}
}
static u32 gen11_get_crystal_clock_freq(struct intel_uncore *uncore,
u32 rpm_config_reg)
{
......@@ -72,17 +52,15 @@ static u32 gen11_get_crystal_clock_freq(struct intel_uncore *uncore,
}
}
static u32 read_clock_frequency(struct intel_uncore *uncore)
static u32 gen11_read_clock_frequency(struct intel_uncore *uncore)
{
u32 f12_5_mhz = 12500000;
u32 f19_2_mhz = 19200000;
u32 f24_mhz = 24000000;
if (GRAPHICS_VER(uncore->i915) >= 11) {
u32 ctc_reg = intel_uncore_read(uncore, CTC_MODE);
u32 freq = 0;
/*
* Note that on gen11+, the clock frequency may be reconfigured.
* We do not, and we assume nobody else does.
*
* First figure out the reference frequency. There are 2 ways
* we can compute the frequency, either through the
* TIMESTAMP_OVERRIDE register or through RPM_CONFIG. CTC_MODE
......@@ -93,10 +71,7 @@ static u32 read_clock_frequency(struct intel_uncore *uncore)
} else {
u32 c0 = intel_uncore_read(uncore, RPM_CONFIG0);
if (GRAPHICS_VER(uncore->i915) >= 11)
freq = gen11_get_crystal_clock_freq(uncore, c0);
else
freq = gen9_get_crystal_clock_freq(uncore, c0);
/*
* Now figure out how the command stream's timestamp
......@@ -108,14 +83,17 @@ static u32 read_clock_frequency(struct intel_uncore *uncore)
}
return freq;
} else if (GRAPHICS_VER(uncore->i915) >= 9) {
}
static u32 gen9_read_clock_frequency(struct intel_uncore *uncore)
{
u32 ctc_reg = intel_uncore_read(uncore, CTC_MODE);
u32 freq = 0;
if ((ctc_reg & CTC_SOURCE_PARAMETER_MASK) == CTC_SOURCE_DIVIDE_LOGIC) {
freq = read_reference_ts_freq(uncore);
} else {
freq = IS_GEN9_LP(uncore->i915) ? f19_2_mhz : f24_mhz;
freq = IS_GEN9_LP(uncore->i915) ? 19200000 : 24000000;
/*
* Now figure out how the command stream's timestamp
......@@ -127,7 +105,10 @@ static u32 read_clock_frequency(struct intel_uncore *uncore)
}
return freq;
} else if (GRAPHICS_VER(uncore->i915) >= 5) {
}
static u32 gen5_read_clock_frequency(struct intel_uncore *uncore)
{
/*
* PRMs say:
*
......@@ -135,8 +116,11 @@ static u32 read_clock_frequency(struct intel_uncore *uncore)
* reflects bits 38:3 of the TSC (i.e. 80ns granularity,
* rolling over every 1.5 hours).
*/
return f12_5_mhz;
} else {
return 12500000;
}
static u32 gen2_read_clock_frequency(struct intel_uncore *uncore)
{
/*
* PRMs say:
*
......@@ -145,22 +129,29 @@ static u32 read_clock_frequency(struct intel_uncore *uncore)
* (“CLKCFG”) MCHBAR register)
*/
return RUNTIME_INFO(uncore->i915)->rawclk_freq * 1000 / 16;
}
}
static u32 read_clock_frequency(struct intel_uncore *uncore)
{
if (GRAPHICS_VER(uncore->i915) >= 11)
return gen11_read_clock_frequency(uncore);
else if (GRAPHICS_VER(uncore->i915) >= 9)
return gen9_read_clock_frequency(uncore);
else if (GRAPHICS_VER(uncore->i915) >= 5)
return gen5_read_clock_frequency(uncore);
else
return gen2_read_clock_frequency(uncore);
}
void intel_gt_init_clock_frequency(struct intel_gt *gt)
{
/*
* Note that on gen11+, the clock frequency may be reconfigured.
* We do not, and we assume nobody else does.
*/
gt->clock_frequency = read_clock_frequency(gt->uncore);
if (gt->clock_frequency)
gt->clock_period_ns = intel_gt_clock_interval_to_ns(gt, 1);
/* Icelake appears to use another fixed frequency for CTX_TIMESTAMP */
if (GRAPHICS_VER(gt->i915) == 11)
gt->clock_period_ns = NSEC_PER_SEC / 13750000;
else if (gt->clock_frequency)
gt->clock_period_ns = intel_gt_clock_interval_to_ns(gt, 1);
GT_TRACE(gt,
"Using clock frequency: %dkHz, period: %dns, wrap: %lldms\n",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment