Commit 143e1954 authored by Mark Brown's avatar Mark Brown

ASoC: stm32: fix dtbs_check warnings

Merge series from Olivier Moysan <olivier.moysan@foss.st.com>:

Fix dtbs_check warnings in STM32MP15 DK boards Devices Trees for
STM32 I2S and Cirrus CS42L51 codec.

- Add OF graph port property in I2S and CS42L51 DT bindings.
  Fixes warnings:
  audio-controller@4000b000: Unevaluated properties are not allowed
  ('port' was unexpected)
  cs42l51@4a: Unevaluated properties are not allowed
  ('port' was unexpected)
- Correct OF graph DAI audio format property for STM32MP15x Dkx I2S node
parents 99f3e7de fe748da7
...@@ -44,6 +44,10 @@ properties: ...@@ -44,6 +44,10 @@ properties:
VAHP-supply: VAHP-supply:
description: phandle to voltage regulator of headphone description: phandle to voltage regulator of headphone
port:
$ref: audio-graph-port.yaml#
unevaluatedProperties: false
required: required:
- compatible - compatible
- reg - reg
...@@ -69,6 +73,13 @@ examples: ...@@ -69,6 +73,13 @@ examples:
VA-supply = <&reg_audio>; VA-supply = <&reg_audio>;
VAHP-supply = <&reg_audio>; VAHP-supply = <&reg_audio>;
reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>; reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
/* assume audio-graph */
port {
cpu_endpoint: endpoint {
remote-endpoint = <&cpu_endpoint>;
};
};
}; };
}; };
... ...
...@@ -61,6 +61,10 @@ properties: ...@@ -61,6 +61,10 @@ properties:
description: Configure the I2S device as MCLK clock provider. description: Configure the I2S device as MCLK clock provider.
const: 0 const: 0
port:
$ref: audio-graph-port.yaml#
unevaluatedProperties: false
required: required:
- compatible - compatible
- "#sound-dai-cells" - "#sound-dai-cells"
...@@ -89,6 +93,13 @@ examples: ...@@ -89,6 +93,13 @@ examples:
dma-names = "rx", "tx"; dma-names = "rx", "tx";
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&i2s2_pins_a>; pinctrl-0 = <&i2s2_pins_a>;
/* assume audio-graph */
port {
codec_endpoint: endpoint {
remote-endpoint = <&codec_endpoint>;
};
};
}; };
... ...
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment