Skip to content

L
linux
Commit 14458b19 authored by Bill Pemberton's avatar Bill Pemberton Committed by Greg Kroah-Hartman
Browse files
Options

Staging: comedi: remove C99 comments in adl_pci6208.c 

Signed-off-by: default avatarBill Pemberton <wfp5p@virginia.edu>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 1efd18f0
Show whitespace changes
Inline Side-by-side
Showing with 61 additions and 61 deletions
drivers/staging/comedi/drivers/adl_pci6208.c
View file @ 14458b19
......@@ -61,35 +61,35 @@ struct pci6208_board {
const char *name;
unsigned short dev_id; /* `lspci` will show you this */
int ao_chans;
//int ao_bits;
/* int ao_bits; */
};
static const struct pci6208_board pci6208_boards[] = {
/*{
name : "pci6208v",
dev_id : 0x6208, //not sure
dev_id : 0x6208, // not sure
ao_chans: 8
//, ao_bits : 16
// , ao_bits : 16
},
{
name : "pci6216v",
dev_id : 0x6208, //not sure
dev_id : 0x6208, // not sure
ao_chans: 16
//, ao_bits : 16
// , ao_bits : 16
}, */
{
name: "pci6208a",
dev_id: 0x6208,
ao_chans:8
//, ao_bits : 16
/* , ao_bits : 16 */
}
};
/* This is used by modprobe to translate PCI IDs to drivers. Should
* only be used for PCI and ISA-PnP devices */
static DEFINE_PCI_DEVICE_TABLE(pci6208_pci_table) = {
//{ PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
//{ PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
/* { PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, */
/* { PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, */
{PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{0}
};
......@@ -132,10 +132,10 @@ static int pci6208_ao_winsn(struct comedi_device * dev, struct comedi_subdevice
struct comedi_insn * insn, unsigned int * data);
static int pci6208_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data);
//static int pci6208_dio_insn_bits(struct comedi_device *dev,struct comedi_subdevice *s,
// struct comedi_insn *insn,unsigned int *data);
//static int pci6208_dio_insn_config(struct comedi_device *dev,struct comedi_subdevice *s,
// struct comedi_insn *insn,unsigned int *data);
/* static int pci6208_dio_insn_bits(struct comedi_device *dev,struct comedi_subdevice *s, */
/* struct comedi_insn *insn,unsigned int *data); */
/* static int pci6208_dio_insn_config(struct comedi_device *dev,struct comedi_subdevice *s, */
/* struct comedi_insn *insn,unsigned int *data); */
/*
* Attach is called by the Comedi core to configure the driver
......@@ -176,22 +176,22 @@ static int pci6208_attach(struct comedi_device * dev, struct comedi_devconfig *
s = dev->subdevices + 0;
/* analog output subdevice */
s->type = COMEDI_SUBD_AO;
s->subdev_flags = SDF_WRITABLE; //anything else to add here??
s->subdev_flags = SDF_WRITABLE; /* anything else to add here?? */
s->n_chan = thisboard->ao_chans;
s->maxdata = 0xffff; //16-bit DAC
s->range_table = &range_bipolar10; //this needs to be checked.
s->maxdata = 0xffff; /* 16-bit DAC */
s->range_table = &range_bipolar10; /* this needs to be checked. */
s->insn_write = pci6208_ao_winsn;
s->insn_read = pci6208_ao_rinsn;
//s=dev->subdevices+1;
/* s=dev->subdevices+1; */
/* digital i/o subdevice */
//s->type=COMEDI_SUBD_DIO;
//s->subdev_flags=SDF_READABLE|SDF_WRITABLE;
//s->n_chan=16;
//s->maxdata=1;
//s->range_table=&range_digital;
//s->insn_bits = pci6208_dio_insn_bits;
//s->insn_config = pci6208_dio_insn_config;
/* s->type=COMEDI_SUBD_DIO; */
/* s->subdev_flags=SDF_READABLE|SDF_WRITABLE; */
/* s->n_chan=16; */
/* s->maxdata=1; */
/* s->range_table=&range_digital; */
/* s->insn_bits = pci6208_dio_insn_bits; */
/* s->insn_config = pci6208_dio_insn_config; */
printk("attached\n");
......@@ -262,49 +262,49 @@ static int pci6208_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice
* useful to applications if you implement the insn_bits interface.
* This allows packed reading/writing of the DIO channels. The
* comedi core can convert between insn_bits and insn_read/write */
//static int pci6208_dio_insn_bits(struct comedi_device *dev,struct comedi_subdevice *s,
// struct comedi_insn *insn,unsigned int *data)
//{
// if(insn->n!=2)return -EINVAL;
/* static int pci6208_dio_insn_bits(struct comedi_device *dev,struct comedi_subdevice *s, */
/* struct comedi_insn *insn,unsigned int *data) */
/* { */
/* if(insn->n!=2)return -EINVAL; */
/* The insn data is a mask in data[0] and the new data
* in data[1], each channel cooresponding to a bit. */
// if(data[0]){
// s->state &= ~data[0];
// s->state |= data[0]&data[1];
/* if(data[0]){ */
/* s->state &= ~data[0]; */
/* s->state |= data[0]&data[1]; */
/* Write out the new digital output lines */
//outw(s->state,dev->iobase + SKEL_DIO);
// }
/* outw(s->state,dev->iobase + SKEL_DIO); */
/* } */
/* on return, data[1] contains the value of the digital
* input and output lines. */
//data[1]=inw(dev->iobase + SKEL_DIO);
/* data[1]=inw(dev->iobase + SKEL_DIO); */
/* or we could just return the software copy of the output values if
* it was a purely digital output subdevice */
//data[1]=s->state;
/* data[1]=s->state; */
// return 2;
//}
/* return 2; */
/* } */
//static int pci6208_dio_insn_config(struct comedi_device *dev,struct comedi_subdevice *s,
// struct comedi_insn *insn,unsigned int *data)
//{
// int chan=CR_CHAN(insn->chanspec);
/* static int pci6208_dio_insn_config(struct comedi_device *dev,struct comedi_subdevice *s, */
/* struct comedi_insn *insn,unsigned int *data) */
/* { */
/* int chan=CR_CHAN(insn->chanspec); */
/* The input or output configuration of each digital line is
* configured by a special insn_config instruction. chanspec
* contains the channel to be changed, and data[0] contains the
* value COMEDI_INPUT or COMEDI_OUTPUT. */
// if(data[0]==COMEDI_OUTPUT){
// s->io_bits |= 1<<chan;
// }else{
// s->io_bits &= ~(1<<chan);
// }
//outw(s->io_bits,dev->iobase + SKEL_DIO_CONFIG);
/* if(data[0]==COMEDI_OUTPUT){ */
/* s->io_bits |= 1<<chan; */
/* }else{ */
/* s->io_bits &= ~(1<<chan); */
/* } */
/* outw(s->io_bits,dev->iobase + SKEL_DIO_CONFIG); */
// return 1;
//}
/* return 1; */
/* } */
static int pci6208_find_device(struct comedi_device * dev, int bus, int slot)
{
......@@ -317,9 +317,9 @@ static int pci6208_find_device(struct comedi_device * dev, int bus, int slot)
if (pci_dev->vendor == PCI_VENDOR_ID_ADLINK) {
for (i = 0; i < pci6208_board_nbr; i++) {
if (pci6208_boards[i].dev_id == pci_dev->device) {
// was a particular bus/slot requested?
/* was a particular bus/slot requested? */
if ((bus != 0) || (slot != 0)) {
// are we on the wrong bus/slot?
/* are we on the wrong bus/slot? */
if (pci_dev->bus->number
!= bus ||
PCI_SLOT(pci_dev->devfn)
......@@ -346,10 +346,10 @@ static int pci6208_find_device(struct comedi_device * dev, int bus, int slot)
PCI_SLOT(pci_dev->devfn),
PCI_FUNC(pci_dev->devfn), pci_dev->irq);
// TODO: Warn about non-tested boards.
//switch(board->device_id)
//{
//};
/* TODO: Warn about non-tested boards. */
/* switch(board->device_id) */
/* { */
/* }; */
devpriv->pci_dev = pci_dev;
......@@ -362,19 +362,19 @@ pci6208_pci_setup(struct pci_dev *pci_dev, unsigned long *io_base_ptr,
{
unsigned long io_base, io_range, lcr_io_base, lcr_io_range;
// Enable PCI device and request regions
/* Enable PCI device and request regions */
if (comedi_pci_enable(pci_dev, PCI6208_DRIVER_NAME) < 0) {
printk("comedi%d: Failed to enable PCI device and request regions\n", dev_minor);
return -EIO;
}
// Read local configuration register base address [PCI_BASE_ADDRESS #1].
/* Read local configuration register base address [PCI_BASE_ADDRESS #1]. */
lcr_io_base = pci_resource_start(pci_dev, 1);
lcr_io_range = pci_resource_len(pci_dev, 1);
printk("comedi%d: local config registers at address 0x%4lx [0x%4lx]\n",
dev_minor, lcr_io_base, lcr_io_range);
// Read PCI6208 register base address [PCI_BASE_ADDRESS #2].
/* Read PCI6208 register base address [PCI_BASE_ADDRESS #2]. */
io_base = pci_resource_start(pci_dev, 2);
io_range = pci_resource_end(pci_dev, 2) - io_base + 1;
......@@ -382,10 +382,10 @@ pci6208_pci_setup(struct pci_dev *pci_dev, unsigned long *io_base_ptr,
dev_minor, io_base, io_range);
*io_base_ptr = io_base;
//devpriv->io_range = io_range;
//devpriv->is_valid=0;
//devpriv->lcr_io_base=lcr_io_base;
//devpriv->lcr_io_range=lcr_io_range;
/* devpriv->io_range = io_range; */
/* devpriv->is_valid=0; */
/* devpriv->lcr_io_base=lcr_io_base; */
/* devpriv->lcr_io_range=lcr_io_range; */
return 0;
}
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7