Merge branch 'bpf: introduce bpf_get_branch_snapshot'

Song Liu says:

====================

Changes v6 => v7:
1. Improve/fix intel_pmu_snapshot_branch_stack() logic. (Peter).

Changes v5 => v6:
1. Add local_irq_save/restore to intel_pmu_snapshot_branch_stack. (Peter)
2. Remove buf and size check in bpf_get_branch_snapshot, move flags check
   to later fo the function. (Peter, Andrii)
3. Revise comments for bpf_get_branch_snapshot in bpf.h (Andrii)

Changes v4 => v5:
1. Modify perf_snapshot_branch_stack_t to save some memcpy. (Andrii)
2. Minor fixes in selftests. (Andrii)

Changes v3 => v4:
1. Do not reshuffle intel_pmu_disable_all(). Use some inline to save LBR
   entries. (Peter)
2. Move static_call(perf_snapshot_branch_stack) to the helper. (Alexei)
3. Add argument flags to bpf_get_branch_snapshot. (Andrii)
4. Make MAX_BRANCH_SNAPSHOT an enum (Andrii). And rename it as
   PERF_MAX_BRANCH_SNAPSHOT
5. Make bpf_get_branch_snapshot similar to bpf_read_branch_records.
   (Andrii)
6. Move the test target function to bpf_testmod. Updated kallsyms_find_next
   to work properly with modules. (Andrii)

Changes v2 => v3:
1. Fix the use of static_call. (Peter)
2. Limit the use to perfmon version >= 2. (Peter)
3. Modify intel_pmu_snapshot_branch_stack() to use intel_pmu_disable_all
   and intel_pmu_enable_all().

Changes v1 => v2:
1. Rename the helper as bpf_get_branch_snapshot;
2. Fix/simplify the use of static_call;
3. Instead of percpu variables, let intel_pmu_snapshot_branch_stack output
   branch records to an output argument of type perf_branch_snapshot.

Branch stack can be very useful in understanding software events. For
example, when a long function, e.g. sys_perf_event_open, returns an errno,
it is not obvious why the function failed. Branch stack could provide very
helpful information in this type of scenarios.

This set adds support to read branch stack with a new BPF helper
bpf_get_branch_trace(). Currently, this is only supported in Intel systems.
It is also possible to support the same feaure for PowerPC.

The hardware that records the branch stace is not stopped automatically on
software events. Therefore, it is necessary to stop it in software soon.
Otherwise, the hardware buffers/registers will be flushed. One of the key
design consideration in this set is to minimize the number of branch record
entries between the event triggers and the hardware recorder is stopped.
Based on this goal, current design is different from the discussions in
original RFC [1]:
 1) Static call is used when supported, to save function pointer
    dereference;
 2) intel_pmu_lbr_disable_all is used instead of perf_pmu_disable(),
    because the latter uses about 10 entries before stopping LBR.

With current code, on Intel CPU, LBR is stopped after 7 branch entries
after fexit triggers:

ID: 0 from bpf_get_branch_snapshot+18 to intel_pmu_snapshot_branch_stack+0
ID: 1 from __brk_limit+477143934 to bpf_get_branch_snapshot+0
ID: 2 from __brk_limit+477192263 to __brk_limit+477143880  # trampoline
ID: 3 from __bpf_prog_enter+34 to __brk_limit+477192251
ID: 4 from migrate_disable+60 to __bpf_prog_enter+9
ID: 5 from __bpf_prog_enter+4 to migrate_disable+0
ID: 6 from bpf_testmod_loop_test+20 to __bpf_prog_enter+0
ID: 7 from bpf_testmod_loop_test+20 to bpf_testmod_loop_test+13
ID: 8 from bpf_testmod_loop_test+20 to bpf_testmod_loop_test+13
...

[1] https://lore.kernel.org/bpf/20210818012937.2522409-1-songliubraving@fb.com/
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

arch/x86/events/intel/core.c

@@ -2143,19 +2143,19 @@ static __initconst const u64 knl_hw_cache_extra_regs
  * However, there are some cases which may change PEBS status, e.g. PMI
  * throttle. The PEBS_ENABLE should be updated where the status changes.
  */
-static void __intel_pmu_disable_all(void)
+static __always_inline void __intel_pmu_disable_all(bool bts)
 {
 	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
 
 	wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, 0);
 
-	if (test_bit(INTEL_PMC_IDX_FIXED_BTS, cpuc->active_mask))
+	if (bts && test_bit(INTEL_PMC_IDX_FIXED_BTS, cpuc->active_mask))
 		intel_pmu_disable_bts();
 }
 
-static void intel_pmu_disable_all(void)
+static __always_inline void intel_pmu_disable_all(void)
 {
-	__intel_pmu_disable_all();
+	__intel_pmu_disable_all(true);
 	intel_pmu_pebs_disable_all();
 	intel_pmu_lbr_disable_all();
 }
@@ -2186,6 +2186,49 @@ static void intel_pmu_enable_all(int added)
 	__intel_pmu_enable_all(added, false);
 }
 
+static noinline int
+__intel_pmu_snapshot_branch_stack(struct perf_branch_entry *entries,
+				  unsigned int cnt, unsigned long flags)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+
+	intel_pmu_lbr_read();
+	cnt = min_t(unsigned int, cnt, x86_pmu.lbr_nr);
+
+	memcpy(entries, cpuc->lbr_entries, sizeof(struct perf_branch_entry) * cnt);
+	intel_pmu_enable_all(0);
+	local_irq_restore(flags);
+	return cnt;
+}
+
+static int
+intel_pmu_snapshot_branch_stack(struct perf_branch_entry *entries, unsigned int cnt)
+{
+	unsigned long flags;
+
+	/* must not have branches... */
+	local_irq_save(flags);
+	__intel_pmu_disable_all(false); /* we don't care about BTS */
+	__intel_pmu_pebs_disable_all();
+	__intel_pmu_lbr_disable();
+	/*            ... until here */
+	return __intel_pmu_snapshot_branch_stack(entries, cnt, flags);
+}
+
+static int
+intel_pmu_snapshot_arch_branch_stack(struct perf_branch_entry *entries, unsigned int cnt)
+{
+	unsigned long flags;
+
+	/* must not have branches... */
+	local_irq_save(flags);
+	__intel_pmu_disable_all(false); /* we don't care about BTS */
+	__intel_pmu_pebs_disable_all();
+	__intel_pmu_arch_lbr_disable();
+	/*            ... until here */
+	return __intel_pmu_snapshot_branch_stack(entries, cnt, flags);
+}
+
 /*
  * Workaround for:
  *   Intel Errata AAK100 (model 26)
@@ -2929,7 +2972,7 @@ static int intel_pmu_handle_irq(struct pt_regs *regs)
 		apic_write(APIC_LVTPC, APIC_DM_NMI);
 	intel_bts_disable_local();
 	cpuc->enabled = 0;
-	__intel_pmu_disable_all();
+	__intel_pmu_disable_all(true);
 	handled = intel_pmu_drain_bts_buffer();
 	handled += intel_bts_interrupt();
 	status = intel_pmu_get_status();
@@ -6283,9 +6326,21 @@ __init int intel_pmu_init(void)
 			x86_pmu.lbr_nr = 0;
 	}
 
-	if (x86_pmu.lbr_nr)
+	if (x86_pmu.lbr_nr) {
 		pr_cont("%d-deep LBR, ", x86_pmu.lbr_nr);
 
+		/* only support branch_stack snapshot for perfmon >= v2 */
+		if (x86_pmu.disable_all == intel_pmu_disable_all) {
+			if (boot_cpu_has(X86_FEATURE_ARCH_LBR)) {
+				static_call_update(perf_snapshot_branch_stack,
+						   intel_pmu_snapshot_arch_branch_stack);
+			} else {
+				static_call_update(perf_snapshot_branch_stack,
+						   intel_pmu_snapshot_branch_stack);
+			}
+		}
+	}
+
 	intel_pmu_check_extra_regs(x86_pmu.extra_regs);
 
 	/* Support full width counters using alternative MSR range */

arch/x86/events/intel/ds.c

@@ -1301,7 +1301,7 @@ void intel_pmu_pebs_disable_all(void)
 	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
 
 	if (cpuc->pebs_enabled)
-		wrmsrl(MSR_IA32_PEBS_ENABLE, 0);
+		__intel_pmu_pebs_disable_all();
 }
 
 static int intel_pmu_pebs_fixup_ip(struct pt_regs *regs)

arch/x86/events/intel/lbr.c

@@ -228,20 +228,6 @@ static void __intel_pmu_lbr_enable(bool pmi)
 		wrmsrl(MSR_ARCH_LBR_CTL, lbr_select | ARCH_LBR_CTL_LBREN);
 }
 
-static void __intel_pmu_lbr_disable(void)
-{
-	u64 debugctl;
-
-	if (static_cpu_has(X86_FEATURE_ARCH_LBR)) {
-		wrmsrl(MSR_ARCH_LBR_CTL, 0);
-		return;
-	}
-
-	rdmsrl(MSR_IA32_DEBUGCTLMSR, debugctl);
-	debugctl &= ~(DEBUGCTLMSR_LBR | DEBUGCTLMSR_FREEZE_LBRS_ON_PMI);
-	wrmsrl(MSR_IA32_DEBUGCTLMSR, debugctl);
-}
-
 void intel_pmu_lbr_reset_32(void)
 {
 	int i;
@@ -779,8 +765,12 @@ void intel_pmu_lbr_disable_all(void)
 {
 	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
 
-	if (cpuc->lbr_users && !vlbr_exclude_host())
+	if (cpuc->lbr_users && !vlbr_exclude_host()) {
+		if (static_cpu_has(X86_FEATURE_ARCH_LBR))
+			return __intel_pmu_arch_lbr_disable();
+
 		__intel_pmu_lbr_disable();
+	}
 }
 
 void intel_pmu_lbr_read_32(struct cpu_hw_events *cpuc)

arch/x86/events/perf_event.h

@@ -1240,6 +1240,25 @@ static inline bool intel_pmu_has_bts(struct perf_event *event)
 	return intel_pmu_has_bts_period(event, hwc->sample_period);
 }
 
+static __always_inline void __intel_pmu_pebs_disable_all(void)
+{
+	wrmsrl(MSR_IA32_PEBS_ENABLE, 0);
+}
+
+static __always_inline void __intel_pmu_arch_lbr_disable(void)
+{
+	wrmsrl(MSR_ARCH_LBR_CTL, 0);
+}
+
+static __always_inline void __intel_pmu_lbr_disable(void)
+{
+	u64 debugctl;
+
+	rdmsrl(MSR_IA32_DEBUGCTLMSR, debugctl);
+	debugctl &= ~(DEBUGCTLMSR_LBR | DEBUGCTLMSR_FREEZE_LBRS_ON_PMI);
+	wrmsrl(MSR_IA32_DEBUGCTLMSR, debugctl);
+}
+
 int intel_pmu_save_and_restart(struct perf_event *event);
 
 struct event_constraint *

include/linux/perf_event.h

@@ -57,6 +57,7 @@ struct perf_guest_info_callbacks {
 #include <linux/cgroup.h>
 #include <linux/refcount.h>
 #include <linux/security.h>
+#include <linux/static_call.h>
 #include <asm/local.h>
 
 struct perf_callchain_entry {
@@ -1612,4 +1613,26 @@ extern void __weak arch_perf_update_userpage(struct perf_event *event,
 extern __weak u64 arch_perf_get_page_size(struct mm_struct *mm, unsigned long addr);
 #endif
 
+/*
+ * Snapshot branch stack on software events.
+ *
+ * Branch stack can be very useful in understanding software events. For
+ * example, when a long function, e.g. sys_perf_event_open, returns an
+ * errno, it is not obvious why the function failed. Branch stack could
+ * provide very helpful information in this type of scenarios.
+ *
+ * On software event, it is necessary to stop the hardware branch recorder
+ * fast. Otherwise, the hardware register/buffer will be flushed with
+ * entries of the triggering event. Therefore, static call is used to
+ * stop the hardware recorder.
+ */
+
+/*
+ * cnt is the number of entries allocated for entries.
+ * Return number of entries copied to .
+ */
+typedef int (perf_snapshot_branch_stack_t)(struct perf_branch_entry *entries,
+					   unsigned int cnt);
+DECLARE_STATIC_CALL(perf_snapshot_branch_stack, perf_snapshot_branch_stack_t);
+
 #endif /* _LINUX_PERF_EVENT_H */

include/uapi/linux/bpf.h

@@ -4877,6 +4877,27 @@ union bpf_attr {
  *		Get the struct pt_regs associated with **task**.
  *	Return
  *		A pointer to struct pt_regs.
+ *
+ * long bpf_get_branch_snapshot(void *entries, u32 size, u64 flags)
+ *	Description
+ *		Get branch trace from hardware engines like Intel LBR. The
+ *		hardware engine is stopped shortly after the helper is
+ *		called. Therefore, the user need to filter branch entries
+ *		based on the actual use case. To capture branch trace
+ *		before the trigger point of the BPF program, the helper
+ *		should be called at the beginning of the BPF program.
+ *
+ *		The data is stored as struct perf_branch_entry into output
+ *		buffer *entries*. *size* is the size of *entries* in bytes.
+ *		*flags* is reserved for now and must be zero.
+ *
+ *	Return
+ *		On success, number of bytes written to *buf*. On error, a
+ *		negative value.
+ *
+ *		**-EINVAL** if *flags* is not zero.
+ *
+ *		**-ENOENT** if architecture does not support branch records.
  */
 #define __BPF_FUNC_MAPPER(FN)		\
 	FN(unspec),			\
@@ -5055,6 +5076,7 @@ union bpf_attr {
 	FN(get_func_ip),		\
 	FN(get_attach_cookie),		\
 	FN(task_pt_regs),		\
+	FN(get_branch_snapshot),	\
 	/* */
 
 /* integer value in 'imm' field of BPF_CALL instruction selects which helper

kernel/bpf/trampoline.c

@@ -10,6 +10,7 @@
 #include <linux/rcupdate_trace.h>
 #include <linux/rcupdate_wait.h>
 #include <linux/module.h>
+#include <linux/static_call.h>
 
 /* dummy _ops. The verifier will operate on target program's ops. */
 const struct bpf_verifier_ops bpf_extension_verifier_ops = {
@@ -526,7 +527,7 @@ void bpf_trampoline_put(struct bpf_trampoline *tr)
 }
 
 #define NO_START_TIME 1
-static u64 notrace bpf_prog_start_time(void)
+static __always_inline u64 notrace bpf_prog_start_time(void)
 {
 	u64 start = NO_START_TIME;
 

kernel/events/core.c

@@ -13435,3 +13435,5 @@ struct cgroup_subsys perf_event_cgrp_subsys = {
 	.threaded	= true,
 };
 #endif /* CONFIG_CGROUP_PERF */
+
+DEFINE_STATIC_CALL_RET0(perf_snapshot_branch_stack, perf_snapshot_branch_stack_t);

kernel/trace/bpf_trace.c

@@ -1017,6 +1017,34 @@ static const struct bpf_func_proto bpf_get_attach_cookie_proto_pe = {
 	.arg1_type	= ARG_PTR_TO_CTX,
 };
 
+BPF_CALL_3(bpf_get_branch_snapshot, void *, buf, u32, size, u64, flags)
+{
+#ifndef CONFIG_X86
+	return -ENOENT;
+#else
+	static const u32 br_entry_size = sizeof(struct perf_branch_entry);
+	u32 entry_cnt = size / br_entry_size;
+
+	entry_cnt = static_call(perf_snapshot_branch_stack)(buf, entry_cnt);
+
+	if (unlikely(flags))
+		return -EINVAL;
+
+	if (!entry_cnt)
+		return -ENOENT;
+
+	return entry_cnt * br_entry_size;
+#endif
+}
+
+static const struct bpf_func_proto bpf_get_branch_snapshot_proto = {
+	.func		= bpf_get_branch_snapshot,
+	.gpl_only	= true,
+	.ret_type	= RET_INTEGER,
+	.arg1_type	= ARG_PTR_TO_UNINIT_MEM,
+	.arg2_type	= ARG_CONST_SIZE_OR_ZERO,
+};
+
 static const struct bpf_func_proto *
 bpf_tracing_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
 {
@@ -1132,6 +1160,8 @@ bpf_tracing_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
 		return &bpf_snprintf_proto;
 	case BPF_FUNC_get_func_ip:
 		return &bpf_get_func_ip_proto_tracing;
+	case BPF_FUNC_get_branch_snapshot:
+		return &bpf_get_branch_snapshot_proto;
 	default:
 		return bpf_base_func_proto(func_id);
 	}

tools/include/uapi/linux/bpf.h

@@ -4877,6 +4877,27 @@ union bpf_attr {
  *		Get the struct pt_regs associated with **task**.
  *	Return
  *		A pointer to struct pt_regs.
+ *
+ * long bpf_get_branch_snapshot(void *entries, u32 size, u64 flags)
+ *	Description
+ *		Get branch trace from hardware engines like Intel LBR. The
+ *		hardware engine is stopped shortly after the helper is
+ *		called. Therefore, the user need to filter branch entries
+ *		based on the actual use case. To capture branch trace
+ *		before the trigger point of the BPF program, the helper
+ *		should be called at the beginning of the BPF program.
+ *
+ *		The data is stored as struct perf_branch_entry into output
+ *		buffer *entries*. *size* is the size of *entries* in bytes.
+ *		*flags* is reserved for now and must be zero.
+ *
+ *	Return
+ *		On success, number of bytes written to *buf*. On error, a
+ *		negative value.
+ *
+ *		**-EINVAL** if *flags* is not zero.
+ *
+ *		**-ENOENT** if architecture does not support branch records.
  */
 #define __BPF_FUNC_MAPPER(FN)		\
 	FN(unspec),			\
@@ -5055,6 +5076,7 @@ union bpf_attr {
 	FN(get_func_ip),		\
 	FN(get_attach_cookie),		\
 	FN(task_pt_regs),		\
+	FN(get_branch_snapshot),	\
 	/* */
 
 /* integer value in 'imm' field of BPF_CALL instruction selects which helper

tools/testing/selftests/bpf/bpf_testmod/bpf_testmod.c

@@ -13,6 +13,18 @@
 
 DEFINE_PER_CPU(int, bpf_testmod_ksym_percpu) = 123;
 
+noinline int bpf_testmod_loop_test(int n)
+{
+	int i, sum = 0;
+
+	/* the primary goal of this test is to test LBR. Create a lot of
+	 * branches in the function, so we can catch it easily.
+	 */
+	for (i = 0; i < n; i++)
+		sum += i;
+	return sum;
+}
+
 noinline ssize_t
 bpf_testmod_test_read(struct file *file, struct kobject *kobj,
 		      struct bin_attribute *bin_attr,
@@ -24,6 +36,10 @@ bpf_testmod_test_read(struct file *file, struct kobject *kobj,
 		.len = len,
 	};
 
+	/* This is always true. Use the check to make sure the compiler
+	 * doesn't remove bpf_testmod_loop_test.
+	 */
+	if (bpf_testmod_loop_test(101) > 100)
 		trace_bpf_testmod_test_read(current, &ctx);
 
 	return -EIO; /* always fail */
@@ -71,4 +87,3 @@ module_exit(bpf_testmod_exit);
 MODULE_AUTHOR("Andrii Nakryiko");
 MODULE_DESCRIPTION("BPF selftests module");
 MODULE_LICENSE("Dual BSD/GPL");
-

tools/testing/selftests/bpf/prog_tests/core_reloc.c

@@ -30,7 +30,7 @@ static int duration = 0;
 	.output_len = sizeof(struct core_reloc_module_output),		\
 	.prog_sec_name = sec_name,					\
 	.raw_tp_name = tp_name,						\
-	.trigger = trigger_module_test_read,				\
+	.trigger = __trigger_module_test_read,				\
 	.needs_testmod = true,						\
 }
 
@@ -475,19 +475,11 @@ static int setup_type_id_case_failure(struct core_reloc_test_case *test)
 	return 0;
 }
 
-static int trigger_module_test_read(const struct core_reloc_test_case *test)
+static int __trigger_module_test_read(const struct core_reloc_test_case *test)
 {
 	struct core_reloc_module_output *exp = (void *)test->output;
-	int fd, err;
-
-	fd = open("/sys/kernel/bpf_testmod", O_RDONLY);
-	err = -errno;
-	if (CHECK(fd < 0, "testmod_file_open", "failed: %d\n", err))
-		return err;
-
-	read(fd, NULL, exp->len); /* request expected number of bytes */
-	close(fd);
 
+	trigger_module_test_read(exp->len);
 	return 0;
 }
 

tools/testing/selftests/bpf/prog_tests/get_branch_snapshot.c

+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2021 Facebook */
+#include <test_progs.h>
+#include "get_branch_snapshot.skel.h"
+
+static int *pfd_array;
+static int cpu_cnt;
+
+static int create_perf_events(void)
+{
+	struct perf_event_attr attr = {0};
+	int cpu;
+
+	/* create perf event */
+	attr.size = sizeof(attr);
+	attr.type = PERF_TYPE_RAW;
+	attr.config = 0x1b00;
+	attr.sample_type = PERF_SAMPLE_BRANCH_STACK;
+	attr.branch_sample_type = PERF_SAMPLE_BRANCH_KERNEL |
+		PERF_SAMPLE_BRANCH_USER | PERF_SAMPLE_BRANCH_ANY;
+
+	cpu_cnt = libbpf_num_possible_cpus();
+	pfd_array = malloc(sizeof(int) * cpu_cnt);
+	if (!pfd_array) {
+		cpu_cnt = 0;
+		return 1;
+	}
+
+	for (cpu = 0; cpu < cpu_cnt; cpu++) {
+		pfd_array[cpu] = syscall(__NR_perf_event_open, &attr,
+					 -1, cpu, -1, PERF_FLAG_FD_CLOEXEC);
+		if (pfd_array[cpu] < 0)
+			break;
+	}
+
+	return cpu == 0;
+}
+
+static void close_perf_events(void)
+{
+	int cpu = 0;
+	int fd;
+
+	while (cpu++ < cpu_cnt) {
+		fd = pfd_array[cpu];
+		if (fd < 0)
+			break;
+		close(fd);
+	}
+	free(pfd_array);
+}
+
+void test_get_branch_snapshot(void)
+{
+	struct get_branch_snapshot *skel = NULL;
+	int err;
+
+	if (create_perf_events()) {
+		test__skip();  /* system doesn't support LBR */
+		goto cleanup;
+	}
+
+	skel = get_branch_snapshot__open_and_load();
+	if (!ASSERT_OK_PTR(skel, "get_branch_snapshot__open_and_load"))
+		goto cleanup;
+
+	err = kallsyms_find("bpf_testmod_loop_test", &skel->bss->address_low);
+	if (!ASSERT_OK(err, "kallsyms_find"))
+		goto cleanup;
+
+	err = kallsyms_find_next("bpf_testmod_loop_test", &skel->bss->address_high);
+	if (!ASSERT_OK(err, "kallsyms_find_next"))
+		goto cleanup;
+
+	err = get_branch_snapshot__attach(skel);
+	if (!ASSERT_OK(err, "get_branch_snapshot__attach"))
+		goto cleanup;
+
+	trigger_module_test_read(100);
+
+	if (skel->bss->total_entries < 16) {
+		/* too few entries for the hit/waste test */
+		test__skip();
+		goto cleanup;
+	}
+
+	ASSERT_GT(skel->bss->test1_hits, 6, "find_looptest_in_lbr");
+
+	/* Given we stop LBR in software, we will waste a few entries.
+	 * But we should try to waste as few as possible entries. We are at
+	 * about 7 on x86_64 systems.
+	 * Add a check for < 10 so that we get heads-up when something
+	 * changes and wastes too many entries.
+	 */
+	ASSERT_LT(skel->bss->wasted_entries, 10, "check_wasted_entries");
+
+cleanup:
+	get_branch_snapshot__destroy(skel);
+	close_perf_events();
+}

tools/testing/selftests/bpf/prog_tests/module_attach.c

@@ -6,45 +6,6 @@
 
 static int duration;
 
-static int trigger_module_test_read(int read_sz)
-{
-	int fd, err;
-
-	fd = open("/sys/kernel/bpf_testmod", O_RDONLY);
-	err = -errno;
-	if (CHECK(fd < 0, "testmod_file_open", "failed: %d\n", err))
-		return err;
-
-	read(fd, NULL, read_sz);
-	close(fd);
-
-	return 0;
-}
-
-static int trigger_module_test_write(int write_sz)
-{
-	int fd, err;
-	char *buf = malloc(write_sz);
-
-	if (!buf)
-		return -ENOMEM;
-
-	memset(buf, 'a', write_sz);
-	buf[write_sz-1] = '\0';
-
-	fd = open("/sys/kernel/bpf_testmod", O_WRONLY);
-	err = -errno;
-	if (CHECK(fd < 0, "testmod_file_open", "failed: %d\n", err)) {
-		free(buf);
-		return err;
-	}
-
-	write(fd, buf, write_sz);
-	close(fd);
-	free(buf);
-	return 0;
-}
-
 static int delete_module(const char *name, int flags)
 {
 	return syscall(__NR_delete_module, name, flags);

tools/testing/selftests/bpf/progs/get_branch_snapshot.c

+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2021 Facebook */
+#include "vmlinux.h"
+#include <bpf/bpf_helpers.h>
+#include <bpf/bpf_tracing.h>
+
+char _license[] SEC("license") = "GPL";
+
+__u64 test1_hits = 0;
+__u64 address_low = 0;
+__u64 address_high = 0;
+int wasted_entries = 0;
+long total_entries = 0;
+
+#define ENTRY_CNT 32
+struct perf_branch_entry entries[ENTRY_CNT] = {};
+
+static inline bool in_range(__u64 val)
+{
+	return (val >= address_low) && (val < address_high);
+}
+
+SEC("fexit/bpf_testmod_loop_test")
+int BPF_PROG(test1, int n, int ret)
+{
+	long i;
+
+	total_entries = bpf_get_branch_snapshot(entries, sizeof(entries), 0);
+	total_entries /= sizeof(struct perf_branch_entry);
+
+	for (i = 0; i < ENTRY_CNT; i++) {
+		if (i >= total_entries)
+			break;
+		if (in_range(entries[i].from) && in_range(entries[i].to))
+			test1_hits++;
+		else if (!test1_hits)
+			wasted_entries++;
+	}
+	return 0;
+}

tools/testing/selftests/bpf/test_progs.c

@@ -743,6 +743,45 @@ int cd_flavor_subdir(const char *exec_name)
 	return chdir(flavor);
 }
 
+int trigger_module_test_read(int read_sz)
+{
+	int fd, err;
+
+	fd = open("/sys/kernel/bpf_testmod", O_RDONLY);
+	err = -errno;
+	if (!ASSERT_GE(fd, 0, "testmod_file_open"))
+		return err;
+
+	read(fd, NULL, read_sz);
+	close(fd);
+
+	return 0;
+}
+
+int trigger_module_test_write(int write_sz)
+{
+	int fd, err;
+	char *buf = malloc(write_sz);
+
+	if (!buf)
+		return -ENOMEM;
+
+	memset(buf, 'a', write_sz);
+	buf[write_sz-1] = '\0';
+
+	fd = open("/sys/kernel/bpf_testmod", O_WRONLY);
+	err = -errno;
+	if (!ASSERT_GE(fd, 0, "testmod_file_open")) {
+		free(buf);
+		return err;
+	}
+
+	write(fd, buf, write_sz);
+	close(fd);
+	free(buf);
+	return 0;
+}
+
 #define MAX_BACKTRACE_SZ 128
 void crash_handler(int signum)
 {

tools/testing/selftests/bpf/test_progs.h

@@ -291,6 +291,8 @@ int compare_map_keys(int map1_fd, int map2_fd);
 int compare_stack_ips(int smap_fd, int amap_fd, int stack_trace_len);
 int extract_build_id(char *build_id, size_t size);
 int kern_sync_rcu(void);
+int trigger_module_test_read(int read_sz);
+int trigger_module_test_write(int write_sz);
 
 #ifdef __x86_64__
 #define SYS_NANOSLEEP_KPROBE_NAME "__x64_sys_nanosleep"

tools/testing/selftests/bpf/trace_helpers.c

 // SPDX-License-Identifier: GPL-2.0
+#include <ctype.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -117,6 +118,42 @@ int kallsyms_find(const char *sym, unsigned long long *addr)
 	return err;
 }
 
+/* find the address of the next symbol of the same type, this can be used
+ * to determine the end of a function.
+ */
+int kallsyms_find_next(const char *sym, unsigned long long *addr)
+{
+	char type, found_type, name[500];
+	unsigned long long value;
+	bool found = false;
+	int err = 0;
+	FILE *f;
+
+	f = fopen("/proc/kallsyms", "r");
+	if (!f)
+		return -EINVAL;
+
+	while (fscanf(f, "%llx %c %499s%*[^\n]\n", &value, &type, name) > 0) {
+		/* Different types of symbols in kernel modules are mixed
+		 * in /proc/kallsyms. Only return the next matching type.
+		 * Use tolower() for type so that 'T' matches 't'.
+		 */
+		if (found && found_type == tolower(type)) {
+			*addr = value;
+			goto out;
+		}
+		if (strcmp(name, sym) == 0) {
+			found = true;
+			found_type = tolower(type);
+		}
+	}
+	err = -ENOENT;
+
+out:
+	fclose(f);
+	return err;
+}
+
 void read_trace_pipe(void)
 {
 	int trace_fd;

tools/testing/selftests/bpf/trace_helpers.h

@@ -16,6 +16,11 @@ long ksym_get_addr(const char *name);
 /* open kallsyms and find addresses on the fly, faster than load + search. */
 int kallsyms_find(const char *sym, unsigned long long *addr);
 
+/* find the address of the next symbol, this can be used to determine the
+ * end of a function
+ */
+int kallsyms_find_next(const char *sym, unsigned long long *addr);
+
 void read_trace_pipe(void);
 
 ssize_t get_uprobe_offset(const void *addr, ssize_t base);