ide: cleanup ide_build_dmatable()

- use for_each_sg()
- move printing 'DMA table too small' message below use_pio_instead label
- merge '64KB bug' comment with function documentation
- fix intendation

There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

drivers/ide/ide-dma.c

@@ -153,8 +153,11 @@ EXPORT_SYMBOL_GPL(ide_build_sglist);
  *
  *	ide_build_dmatable() prepares a dma request. We map the command
  *	to get the pci bus addresses of the buffers and then build up
- *	the PRD table that the IDE layer wants to be fed. The code
- *	knows about the 64K wrap bug in the CS5530.
+ *	the PRD table that the IDE layer wants to be fed.
+ *
+ *	Most chipsets correctly interpret a length of 0x0000 as 64KB,
+ *	but at least one (e.g. CS5530) misinterprets it as zero (!).
+ *	So we break the 64KB entry into two 32KB entries instead.
  *
  *	Returns the number of built PRD entries if all went okay,
  *	returns 0 otherwise.
@@ -171,15 +174,12 @@ int ide_build_dmatable (ide_drive_t *drive, struct request *rq)
 	int i;
 	struct scatterlist *sg;
 
-	hwif->sg_nents = i = ide_build_sglist(drive, rq);
-
-	if (!i)
+	hwif->sg_nents = ide_build_sglist(drive, rq);
+	if (hwif->sg_nents == 0)
 		return 0;
 
-	sg = hwif->sg_table;
-	while (i) {
-		u32 cur_addr;
-		u32 cur_len;
+	for_each_sg(hwif->sg_table, sg, hwif->sg_nents, i) {
+		u32 cur_addr, cur_len, xcount, bcount;
 
 		cur_addr = sg_dma_address(sg);
 		cur_len = sg_dma_len(sg);
@@ -191,28 +191,19 @@ int ide_build_dmatable (ide_drive_t *drive, struct request *rq)
 		 */
 
 		while (cur_len) {
-			if (count++ >= PRD_ENTRIES) {
-				printk(KERN_ERR "%s: DMA table too small\n", drive->name);
+			if (count++ >= PRD_ENTRIES)
 				goto use_pio_instead;
-			} else {
-				u32 xcount, bcount = 0x10000 - (cur_addr & 0xffff);
 
+			bcount = 0x10000 - (cur_addr & 0xffff);
 			if (bcount > cur_len)
 				bcount = cur_len;
 			*table++ = cpu_to_le32(cur_addr);
 			xcount = bcount & 0xffff;
 			if (is_trm290)
 				xcount = ((xcount >> 2) - 1) << 16;
-				else if (xcount == 0x0000) {
-	/* 
-	 * Most chipsets correctly interpret a length of 0x0000 as 64KB,
-	 * but at least one (e.g. CS5530) misinterprets it as zero (!).
-	 * So here we break the 64KB entry into two 32KB entries instead.
-	 */
-					if (count++ >= PRD_ENTRIES) {
-						printk(KERN_ERR "%s: DMA table too small\n", drive->name);
+			if (xcount == 0x0000) {
+				if (count++ >= PRD_ENTRIES)
 					goto use_pio_instead;
-					}
 				*table++ = cpu_to_le32(0x8000);
 				*table++ = cpu_to_le32(cur_addr + 0x8000);
 				xcount = 0x8000;
@@ -223,24 +214,20 @@ int ide_build_dmatable (ide_drive_t *drive, struct request *rq)
 		}
 	}
 
-		sg = sg_next(sg);
-		i--;
-	}
-
 	if (count) {
 		if (!is_trm290)
 			*--table |= cpu_to_le32(0x80000000);
 		return count;
 	}
 
-	printk(KERN_ERR "%s: empty DMA table?\n", drive->name);
-
 use_pio_instead:
+	printk(KERN_ERR "%s: %s\n", drive->name,
+		count ? "DMA table too small" : "empty DMA table?");
+
 	ide_destroy_dmatable(drive);
 
 	return 0; /* revert to PIO for this request */
 }
-
 EXPORT_SYMBOL_GPL(ide_build_dmatable);
 #endif