phy: rename struct omap_control_usb to struct omap_control_phy

Rename struct omap_control_usb to struct omap_control_phy since it can
be used to control PHY of USB, SATA and PCIE. Also move the driver and
include files under *phy* and made the corresponding changes in the users
of phy-omap-control.
Signed-off-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: default avatarRoger Quadros <rogerq@ti.com>
Acked-by: default avatarFelipe Balbi <balbi@ti.com>
parent db68e80f
...@@ -31,12 +31,22 @@ config PHY_MVEBU_SATA ...@@ -31,12 +31,22 @@ config PHY_MVEBU_SATA
depends on OF depends on OF
select GENERIC_PHY select GENERIC_PHY
config OMAP_CONTROL_PHY
tristate "OMAP CONTROL PHY Driver"
help
Enable this to add support for the PHY part present in the control
module. This driver has API to power on the USB2 PHY and to write to
the mailbox. The mailbox is present only in omap4 and the register to
power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
additional register to power on USB3 PHY/SATA PHY/PCIE PHY
(PIPE3 PHY).
config OMAP_USB2 config OMAP_USB2
tristate "OMAP USB2 PHY Driver" tristate "OMAP USB2 PHY Driver"
depends on ARCH_OMAP2PLUS depends on ARCH_OMAP2PLUS
depends on USB_PHY depends on USB_PHY
select GENERIC_PHY select GENERIC_PHY
select OMAP_CONTROL_USB select OMAP_CONTROL_PHY
help help
Enable this to support the transceiver that is part of SOC. This Enable this to support the transceiver that is part of SOC. This
driver takes care of all the PHY functionality apart from comparator. driver takes care of all the PHY functionality apart from comparator.
...@@ -47,7 +57,7 @@ config TI_PIPE3 ...@@ -47,7 +57,7 @@ config TI_PIPE3
tristate "TI PIPE3 PHY Driver" tristate "TI PIPE3 PHY Driver"
depends on ARCH_OMAP2PLUS || COMPILE_TEST depends on ARCH_OMAP2PLUS || COMPILE_TEST
select GENERIC_PHY select GENERIC_PHY
select OMAP_CONTROL_USB select OMAP_CONTROL_PHY
help help
Enable this to support the PIPE3 PHY that is part of TI SOCs. This Enable this to support the PIPE3 PHY that is part of TI SOCs. This
driver takes care of all the PHY functionality apart from comparator. driver takes care of all the PHY functionality apart from comparator.
......
...@@ -7,6 +7,7 @@ obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o ...@@ -7,6 +7,7 @@ obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o
obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o
obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o
obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
......
/* /*
* omap-control-usb.c - The USB part of control module. * omap-control-phy.c - The PHY part of control module.
* *
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
...@@ -24,36 +24,36 @@ ...@@ -24,36 +24,36 @@
#include <linux/err.h> #include <linux/err.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/clk.h> #include <linux/clk.h>
#include <linux/usb/omap_control_usb.h> #include <linux/phy/omap_control_phy.h>
/** /**
* omap_control_usb_phy_power - power on/off the phy using control module reg * omap_control_phy_power - power on/off the phy using control module reg
* @dev: the control module device * @dev: the control module device
* @on: 0 or 1, based on powering on or off the PHY * @on: 0 or 1, based on powering on or off the PHY
*/ */
void omap_control_usb_phy_power(struct device *dev, int on) void omap_control_phy_power(struct device *dev, int on)
{ {
u32 val; u32 val;
unsigned long rate; unsigned long rate;
struct omap_control_usb *control_usb; struct omap_control_phy *control_phy;
if (IS_ERR(dev) || !dev) { if (IS_ERR(dev) || !dev) {
pr_err("%s: invalid device\n", __func__); pr_err("%s: invalid device\n", __func__);
return; return;
} }
control_usb = dev_get_drvdata(dev); control_phy = dev_get_drvdata(dev);
if (!control_usb) { if (!control_phy) {
dev_err(dev, "%s: invalid control usb device\n", __func__); dev_err(dev, "%s: invalid control phy device\n", __func__);
return; return;
} }
if (control_usb->type == OMAP_CTRL_TYPE_OTGHS) if (control_phy->type == OMAP_CTRL_TYPE_OTGHS)
return; return;
val = readl(control_usb->power); val = readl(control_phy->power);
switch (control_usb->type) { switch (control_phy->type) {
case OMAP_CTRL_TYPE_USB2: case OMAP_CTRL_TYPE_USB2:
if (on) if (on)
val &= ~OMAP_CTRL_DEV_PHY_PD; val &= ~OMAP_CTRL_DEV_PHY_PD;
...@@ -62,19 +62,20 @@ void omap_control_usb_phy_power(struct device *dev, int on) ...@@ -62,19 +62,20 @@ void omap_control_usb_phy_power(struct device *dev, int on)
break; break;
case OMAP_CTRL_TYPE_PIPE3: case OMAP_CTRL_TYPE_PIPE3:
rate = clk_get_rate(control_usb->sys_clk); rate = clk_get_rate(control_phy->sys_clk);
rate = rate/1000000; rate = rate/1000000;
if (on) { if (on) {
val &= ~(OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK | val &= ~(OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK |
OMAP_CTRL_USB_PWRCTL_CLK_FREQ_MASK); OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK);
val |= OMAP_CTRL_USB3_PHY_TX_RX_POWERON << val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON <<
OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT; OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
val |= rate << OMAP_CTRL_USB_PWRCTL_CLK_FREQ_SHIFT; val |= rate <<
OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT;
} else { } else {
val &= ~OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK; val &= ~OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK;
val |= OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF << val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF <<
OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT; OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
} }
break; break;
...@@ -100,66 +101,66 @@ void omap_control_usb_phy_power(struct device *dev, int on) ...@@ -100,66 +101,66 @@ void omap_control_usb_phy_power(struct device *dev, int on)
break; break;
default: default:
dev_err(dev, "%s: type %d not recognized\n", dev_err(dev, "%s: type %d not recognized\n",
__func__, control_usb->type); __func__, control_phy->type);
break; break;
} }
writel(val, control_usb->power); writel(val, control_phy->power);
} }
EXPORT_SYMBOL_GPL(omap_control_usb_phy_power); EXPORT_SYMBOL_GPL(omap_control_phy_power);
/** /**
* omap_control_usb_host_mode - set AVALID, VBUSVALID and ID pin in grounded * omap_control_usb_host_mode - set AVALID, VBUSVALID and ID pin in grounded
* @ctrl_usb: struct omap_control_usb * * @ctrl_phy: struct omap_control_phy *
* *
* Writes to the mailbox register to notify the usb core that a usb * Writes to the mailbox register to notify the usb core that a usb
* device has been connected. * device has been connected.
*/ */
static void omap_control_usb_host_mode(struct omap_control_usb *ctrl_usb) static void omap_control_usb_host_mode(struct omap_control_phy *ctrl_phy)
{ {
u32 val; u32 val;
val = readl(ctrl_usb->otghs_control); val = readl(ctrl_phy->otghs_control);
val &= ~(OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND); val &= ~(OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND);
val |= OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID; val |= OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID;
writel(val, ctrl_usb->otghs_control); writel(val, ctrl_phy->otghs_control);
} }
/** /**
* omap_control_usb_device_mode - set AVALID, VBUSVALID and ID pin in high * omap_control_usb_device_mode - set AVALID, VBUSVALID and ID pin in high
* impedance * impedance
* @ctrl_usb: struct omap_control_usb * * @ctrl_phy: struct omap_control_phy *
* *
* Writes to the mailbox register to notify the usb core that it has been * Writes to the mailbox register to notify the usb core that it has been
* connected to a usb host. * connected to a usb host.
*/ */
static void omap_control_usb_device_mode(struct omap_control_usb *ctrl_usb) static void omap_control_usb_device_mode(struct omap_control_phy *ctrl_phy)
{ {
u32 val; u32 val;
val = readl(ctrl_usb->otghs_control); val = readl(ctrl_phy->otghs_control);
val &= ~OMAP_CTRL_DEV_SESSEND; val &= ~OMAP_CTRL_DEV_SESSEND;
val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_AVALID | val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_AVALID |
OMAP_CTRL_DEV_VBUSVALID; OMAP_CTRL_DEV_VBUSVALID;
writel(val, ctrl_usb->otghs_control); writel(val, ctrl_phy->otghs_control);
} }
/** /**
* omap_control_usb_set_sessionend - Enable SESSIONEND and IDIG to high * omap_control_usb_set_sessionend - Enable SESSIONEND and IDIG to high
* impedance * impedance
* @ctrl_usb: struct omap_control_usb * * @ctrl_phy: struct omap_control_phy *
* *
* Writes to the mailbox register to notify the usb core it's now in * Writes to the mailbox register to notify the usb core it's now in
* disconnected state. * disconnected state.
*/ */
static void omap_control_usb_set_sessionend(struct omap_control_usb *ctrl_usb) static void omap_control_usb_set_sessionend(struct omap_control_phy *ctrl_phy)
{ {
u32 val; u32 val;
val = readl(ctrl_usb->otghs_control); val = readl(ctrl_phy->otghs_control);
val &= ~(OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID); val &= ~(OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID);
val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND; val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND;
writel(val, ctrl_usb->otghs_control); writel(val, ctrl_phy->otghs_control);
} }
/** /**
...@@ -174,30 +175,30 @@ static void omap_control_usb_set_sessionend(struct omap_control_usb *ctrl_usb) ...@@ -174,30 +175,30 @@ static void omap_control_usb_set_sessionend(struct omap_control_usb *ctrl_usb)
void omap_control_usb_set_mode(struct device *dev, void omap_control_usb_set_mode(struct device *dev,
enum omap_control_usb_mode mode) enum omap_control_usb_mode mode)
{ {
struct omap_control_usb *ctrl_usb; struct omap_control_phy *ctrl_phy;
if (IS_ERR(dev) || !dev) if (IS_ERR(dev) || !dev)
return; return;
ctrl_usb = dev_get_drvdata(dev); ctrl_phy = dev_get_drvdata(dev);
if (!ctrl_usb) { if (!ctrl_phy) {
dev_err(dev, "Invalid control usb device\n"); dev_err(dev, "Invalid control phy device\n");
return; return;
} }
if (ctrl_usb->type != OMAP_CTRL_TYPE_OTGHS) if (ctrl_phy->type != OMAP_CTRL_TYPE_OTGHS)
return; return;
switch (mode) { switch (mode) {
case USB_MODE_HOST: case USB_MODE_HOST:
omap_control_usb_host_mode(ctrl_usb); omap_control_usb_host_mode(ctrl_phy);
break; break;
case USB_MODE_DEVICE: case USB_MODE_DEVICE:
omap_control_usb_device_mode(ctrl_usb); omap_control_usb_device_mode(ctrl_phy);
break; break;
case USB_MODE_DISCONNECT: case USB_MODE_DISCONNECT:
omap_control_usb_set_sessionend(ctrl_usb); omap_control_usb_set_sessionend(ctrl_phy);
break; break;
default: default:
dev_vdbg(dev, "invalid omap control usb mode\n"); dev_vdbg(dev, "invalid omap control usb mode\n");
...@@ -207,13 +208,13 @@ EXPORT_SYMBOL_GPL(omap_control_usb_set_mode); ...@@ -207,13 +208,13 @@ EXPORT_SYMBOL_GPL(omap_control_usb_set_mode);
#ifdef CONFIG_OF #ifdef CONFIG_OF
static const enum omap_control_usb_type otghs_data = OMAP_CTRL_TYPE_OTGHS; static const enum omap_control_phy_type otghs_data = OMAP_CTRL_TYPE_OTGHS;
static const enum omap_control_usb_type usb2_data = OMAP_CTRL_TYPE_USB2; static const enum omap_control_phy_type usb2_data = OMAP_CTRL_TYPE_USB2;
static const enum omap_control_usb_type pipe3_data = OMAP_CTRL_TYPE_PIPE3; static const enum omap_control_phy_type pipe3_data = OMAP_CTRL_TYPE_PIPE3;
static const enum omap_control_usb_type dra7usb2_data = OMAP_CTRL_TYPE_DRA7USB2; static const enum omap_control_phy_type dra7usb2_data = OMAP_CTRL_TYPE_DRA7USB2;
static const enum omap_control_usb_type am437usb2_data = OMAP_CTRL_TYPE_AM437USB2; static const enum omap_control_phy_type am437usb2_data = OMAP_CTRL_TYPE_AM437USB2;
static const struct of_device_id omap_control_usb_id_table[] = { static const struct of_device_id omap_control_phy_id_table[] = {
{ {
.compatible = "ti,control-phy-otghs", .compatible = "ti,control-phy-otghs",
.data = &otghs_data, .data = &otghs_data,
...@@ -236,84 +237,84 @@ static const struct of_device_id omap_control_usb_id_table[] = { ...@@ -236,84 +237,84 @@ static const struct of_device_id omap_control_usb_id_table[] = {
}, },
{}, {},
}; };
MODULE_DEVICE_TABLE(of, omap_control_usb_id_table); MODULE_DEVICE_TABLE(of, omap_control_phy_id_table);
#endif #endif
static int omap_control_usb_probe(struct platform_device *pdev) static int omap_control_phy_probe(struct platform_device *pdev)
{ {
struct resource *res; struct resource *res;
const struct of_device_id *of_id; const struct of_device_id *of_id;
struct omap_control_usb *control_usb; struct omap_control_phy *control_phy;
of_id = of_match_device(of_match_ptr(omap_control_usb_id_table), of_id = of_match_device(of_match_ptr(omap_control_phy_id_table),
&pdev->dev); &pdev->dev);
if (!of_id) if (!of_id)
return -EINVAL; return -EINVAL;
control_usb = devm_kzalloc(&pdev->dev, sizeof(*control_usb), control_phy = devm_kzalloc(&pdev->dev, sizeof(*control_phy),
GFP_KERNEL); GFP_KERNEL);
if (!control_usb) { if (!control_phy) {
dev_err(&pdev->dev, "unable to alloc memory for control usb\n"); dev_err(&pdev->dev, "unable to alloc memory for control phy\n");
return -ENOMEM; return -ENOMEM;
} }
control_usb->dev = &pdev->dev; control_phy->dev = &pdev->dev;
control_usb->type = *(enum omap_control_usb_type *)of_id->data; control_phy->type = *(enum omap_control_phy_type *)of_id->data;
if (control_usb->type == OMAP_CTRL_TYPE_OTGHS) { if (control_phy->type == OMAP_CTRL_TYPE_OTGHS) {
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"otghs_control"); "otghs_control");
control_usb->otghs_control = devm_ioremap_resource( control_phy->otghs_control = devm_ioremap_resource(
&pdev->dev, res); &pdev->dev, res);
if (IS_ERR(control_usb->otghs_control)) if (IS_ERR(control_phy->otghs_control))
return PTR_ERR(control_usb->otghs_control); return PTR_ERR(control_phy->otghs_control);
} else { } else {
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"power"); "power");
control_usb->power = devm_ioremap_resource(&pdev->dev, res); control_phy->power = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(control_usb->power)) { if (IS_ERR(control_phy->power)) {
dev_err(&pdev->dev, "Couldn't get power register\n"); dev_err(&pdev->dev, "Couldn't get power register\n");
return PTR_ERR(control_usb->power); return PTR_ERR(control_phy->power);
} }
} }
if (control_usb->type == OMAP_CTRL_TYPE_PIPE3) { if (control_phy->type == OMAP_CTRL_TYPE_PIPE3) {
control_usb->sys_clk = devm_clk_get(control_usb->dev, control_phy->sys_clk = devm_clk_get(control_phy->dev,
"sys_clkin"); "sys_clkin");
if (IS_ERR(control_usb->sys_clk)) { if (IS_ERR(control_phy->sys_clk)) {
pr_err("%s: unable to get sys_clkin\n", __func__); pr_err("%s: unable to get sys_clkin\n", __func__);
return -EINVAL; return -EINVAL;
} }
} }
dev_set_drvdata(control_usb->dev, control_usb); dev_set_drvdata(control_phy->dev, control_phy);
return 0; return 0;
} }
static struct platform_driver omap_control_usb_driver = { static struct platform_driver omap_control_phy_driver = {
.probe = omap_control_usb_probe, .probe = omap_control_phy_probe,
.driver = { .driver = {
.name = "omap-control-usb", .name = "omap-control-phy",
.owner = THIS_MODULE, .owner = THIS_MODULE,
.of_match_table = of_match_ptr(omap_control_usb_id_table), .of_match_table = of_match_ptr(omap_control_phy_id_table),
}, },
}; };
static int __init omap_control_usb_init(void) static int __init omap_control_phy_init(void)
{ {
return platform_driver_register(&omap_control_usb_driver); return platform_driver_register(&omap_control_phy_driver);
} }
subsys_initcall(omap_control_usb_init); subsys_initcall(omap_control_phy_init);
static void __exit omap_control_usb_exit(void) static void __exit omap_control_phy_exit(void)
{ {
platform_driver_unregister(&omap_control_usb_driver); platform_driver_unregister(&omap_control_phy_driver);
} }
module_exit(omap_control_usb_exit); module_exit(omap_control_phy_exit);
MODULE_ALIAS("platform: omap_control_usb"); MODULE_ALIAS("platform: omap_control_phy");
MODULE_AUTHOR("Texas Instruments Inc."); MODULE_AUTHOR("Texas Instruments Inc.");
MODULE_DESCRIPTION("OMAP Control Module USB Driver"); MODULE_DESCRIPTION("OMAP Control Module PHY Driver");
MODULE_LICENSE("GPL v2"); MODULE_LICENSE("GPL v2");
...@@ -27,7 +27,7 @@ ...@@ -27,7 +27,7 @@
#include <linux/err.h> #include <linux/err.h>
#include <linux/pm_runtime.h> #include <linux/pm_runtime.h>
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/usb/omap_control_usb.h> #include <linux/phy/omap_control_phy.h>
#include <linux/phy/phy.h> #include <linux/phy/phy.h>
#include <linux/of_platform.h> #include <linux/of_platform.h>
...@@ -105,7 +105,7 @@ static int omap_usb_power_off(struct phy *x) ...@@ -105,7 +105,7 @@ static int omap_usb_power_off(struct phy *x)
{ {
struct omap_usb *phy = phy_get_drvdata(x); struct omap_usb *phy = phy_get_drvdata(x);
omap_control_usb_phy_power(phy->control_dev, 0); omap_control_phy_power(phy->control_dev, 0);
return 0; return 0;
} }
...@@ -114,7 +114,7 @@ static int omap_usb_power_on(struct phy *x) ...@@ -114,7 +114,7 @@ static int omap_usb_power_on(struct phy *x)
{ {
struct omap_usb *phy = phy_get_drvdata(x); struct omap_usb *phy = phy_get_drvdata(x);
omap_control_usb_phy_power(phy->control_dev, 1); omap_control_phy_power(phy->control_dev, 1);
return 0; return 0;
} }
...@@ -251,7 +251,7 @@ static int omap_usb2_probe(struct platform_device *pdev) ...@@ -251,7 +251,7 @@ static int omap_usb2_probe(struct platform_device *pdev)
} }
phy->control_dev = &control_pdev->dev; phy->control_dev = &control_pdev->dev;
omap_control_usb_phy_power(phy->control_dev, 0); omap_control_phy_power(phy->control_dev, 0);
otg->set_host = omap_usb_set_host; otg->set_host = omap_usb_set_host;
otg->set_peripheral = omap_usb_set_peripheral; otg->set_peripheral = omap_usb_set_peripheral;
......
...@@ -26,7 +26,7 @@ ...@@ -26,7 +26,7 @@
#include <linux/io.h> #include <linux/io.h>
#include <linux/pm_runtime.h> #include <linux/pm_runtime.h>
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/usb/omap_control_usb.h> #include <linux/phy/omap_control_phy.h>
#include <linux/of_platform.h> #include <linux/of_platform.h>
#define PLL_STATUS 0x00000004 #define PLL_STATUS 0x00000004
...@@ -134,7 +134,7 @@ static int ti_pipe3_power_off(struct phy *x) ...@@ -134,7 +134,7 @@ static int ti_pipe3_power_off(struct phy *x)
return -EBUSY; return -EBUSY;
} }
omap_control_usb_phy_power(phy->control_dev, 0); omap_control_phy_power(phy->control_dev, 0);
return 0; return 0;
} }
...@@ -232,7 +232,7 @@ static int ti_pipe3_init(struct phy *x) ...@@ -232,7 +232,7 @@ static int ti_pipe3_init(struct phy *x)
if (ret) if (ret)
return ret; return ret;
omap_control_usb_phy_power(phy->control_dev, 1); omap_control_phy_power(phy->control_dev, 1);
return 0; return 0;
} }
...@@ -304,7 +304,7 @@ static int ti_pipe3_probe(struct platform_device *pdev) ...@@ -304,7 +304,7 @@ static int ti_pipe3_probe(struct platform_device *pdev)
phy->control_dev = &control_pdev->dev; phy->control_dev = &control_pdev->dev;
omap_control_usb_phy_power(phy->control_dev, 0); omap_control_phy_power(phy->control_dev, 0);
platform_set_drvdata(pdev, phy); platform_set_drvdata(pdev, phy);
pm_runtime_enable(phy->dev); pm_runtime_enable(phy->dev);
......
...@@ -37,7 +37,7 @@ ...@@ -37,7 +37,7 @@
#include <linux/err.h> #include <linux/err.h>
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/usb/musb-omap.h> #include <linux/usb/musb-omap.h>
#include <linux/usb/omap_control_usb.h> #include <linux/phy/omap_control_phy.h>
#include <linux/of_platform.h> #include <linux/of_platform.h>
#include "musb_core.h" #include "musb_core.h"
......
...@@ -75,16 +75,6 @@ config NOP_USB_XCEIV ...@@ -75,16 +75,6 @@ config NOP_USB_XCEIV
built-in with usb ip or which are autonomous and doesn't require any built-in with usb ip or which are autonomous and doesn't require any
phy programming such as ISP1x04 etc. phy programming such as ISP1x04 etc.
config OMAP_CONTROL_USB
tristate "OMAP CONTROL USB Driver"
depends on ARCH_OMAP2PLUS || COMPILE_TEST
help
Enable this to add support for the USB part present in the control
module. This driver has API to power on the USB2 PHY and to write to
the mailbox. The mailbox is present only in omap4 and the register to
power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
additional register to power on USB3 PHY.
config AM335X_CONTROL_USB config AM335X_CONTROL_USB
tristate tristate
......
...@@ -13,7 +13,6 @@ obj-$(CONFIG_ISP1301_OMAP) += phy-isp1301-omap.o ...@@ -13,7 +13,6 @@ obj-$(CONFIG_ISP1301_OMAP) += phy-isp1301-omap.o
obj-$(CONFIG_MV_U3D_PHY) += phy-mv-u3d-usb.o obj-$(CONFIG_MV_U3D_PHY) += phy-mv-u3d-usb.o
obj-$(CONFIG_NOP_USB_XCEIV) += phy-generic.o obj-$(CONFIG_NOP_USB_XCEIV) += phy-generic.o
obj-$(CONFIG_TAHVO_USB) += phy-tahvo.o obj-$(CONFIG_TAHVO_USB) += phy-tahvo.o
obj-$(CONFIG_OMAP_CONTROL_USB) += phy-omap-control.o
obj-$(CONFIG_AM335X_CONTROL_USB) += phy-am335x-control.o obj-$(CONFIG_AM335X_CONTROL_USB) += phy-am335x-control.o
obj-$(CONFIG_AM335X_PHY_USB) += phy-am335x.o obj-$(CONFIG_AM335X_PHY_USB) += phy-am335x.o
obj-$(CONFIG_OMAP_OTG) += phy-omap-otg.o obj-$(CONFIG_OMAP_OTG) += phy-omap-otg.o
......
/* /*
* omap_control_usb.h - Header file for the USB part of control module. * omap_control_phy.h - Header file for the PHY part of control module.
* *
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
...@@ -16,10 +16,10 @@ ...@@ -16,10 +16,10 @@
* *
*/ */
#ifndef __OMAP_CONTROL_USB_H__ #ifndef __OMAP_CONTROL_PHY_H__
#define __OMAP_CONTROL_USB_H__ #define __OMAP_CONTROL_PHY_H__
enum omap_control_usb_type { enum omap_control_phy_type {
OMAP_CTRL_TYPE_OTGHS = 1, /* Mailbox OTGHS_CONTROL */ OMAP_CTRL_TYPE_OTGHS = 1, /* Mailbox OTGHS_CONTROL */
OMAP_CTRL_TYPE_USB2, /* USB2_PHY, power down in CONTROL_DEV_CONF */ OMAP_CTRL_TYPE_USB2, /* USB2_PHY, power down in CONTROL_DEV_CONF */
OMAP_CTRL_TYPE_PIPE3, /* PIPE3 PHY, DPLL & seperate Rx/Tx power */ OMAP_CTRL_TYPE_PIPE3, /* PIPE3 PHY, DPLL & seperate Rx/Tx power */
...@@ -27,7 +27,7 @@ enum omap_control_usb_type { ...@@ -27,7 +27,7 @@ enum omap_control_usb_type {
OMAP_CTRL_TYPE_AM437USB2, /* USB2 PHY, power e.g. AM437x */ OMAP_CTRL_TYPE_AM437USB2, /* USB2 PHY, power e.g. AM437x */
}; };
struct omap_control_usb { struct omap_control_phy {
struct device *dev; struct device *dev;
u32 __iomem *otghs_control; u32 __iomem *otghs_control;
...@@ -36,7 +36,7 @@ struct omap_control_usb { ...@@ -36,7 +36,7 @@ struct omap_control_usb {
struct clk *sys_clk; struct clk *sys_clk;
enum omap_control_usb_type type; enum omap_control_phy_type type;
}; };
enum omap_control_usb_mode { enum omap_control_usb_mode {
...@@ -54,14 +54,14 @@ enum omap_control_usb_mode { ...@@ -54,14 +54,14 @@ enum omap_control_usb_mode {
#define OMAP_CTRL_DEV_SESSEND BIT(3) #define OMAP_CTRL_DEV_SESSEND BIT(3)
#define OMAP_CTRL_DEV_IDDIG BIT(4) #define OMAP_CTRL_DEV_IDDIG BIT(4)
#define OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK 0x003FC000 #define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK 0x003FC000
#define OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT 0xE #define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT 0xE
#define OMAP_CTRL_USB_PWRCTL_CLK_FREQ_MASK 0xFFC00000 #define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK 0xFFC00000
#define OMAP_CTRL_USB_PWRCTL_CLK_FREQ_SHIFT 0x16 #define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT 0x16
#define OMAP_CTRL_USB3_PHY_TX_RX_POWERON 0x3 #define OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON 0x3
#define OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF 0x0 #define OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF 0x0
#define OMAP_CTRL_USB2_PHY_PD BIT(28) #define OMAP_CTRL_USB2_PHY_PD BIT(28)
...@@ -70,13 +70,13 @@ enum omap_control_usb_mode { ...@@ -70,13 +70,13 @@ enum omap_control_usb_mode {
#define AM437X_CTRL_USB2_OTGVDET_EN BIT(19) #define AM437X_CTRL_USB2_OTGVDET_EN BIT(19)
#define AM437X_CTRL_USB2_OTGSESSEND_EN BIT(20) #define AM437X_CTRL_USB2_OTGSESSEND_EN BIT(20)
#if IS_ENABLED(CONFIG_OMAP_CONTROL_USB) #if IS_ENABLED(CONFIG_OMAP_CONTROL_PHY)
extern void omap_control_usb_phy_power(struct device *dev, int on); void omap_control_phy_power(struct device *dev, int on);
extern void omap_control_usb_set_mode(struct device *dev, void omap_control_usb_set_mode(struct device *dev,
enum omap_control_usb_mode mode); enum omap_control_usb_mode mode);
#else #else
static inline void omap_control_usb_phy_power(struct device *dev, int on) static inline void omap_control_phy_power(struct device *dev, int on)
{ {
} }
...@@ -86,4 +86,4 @@ static inline void omap_control_usb_set_mode(struct device *dev, ...@@ -86,4 +86,4 @@ static inline void omap_control_usb_set_mode(struct device *dev,
} }
#endif #endif
#endif /* __OMAP_CONTROL_USB_H__ */ #endif /* __OMAP_CONTROL_PHY_H__ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment