iwlwifi: remove apm_ops.stop

Since all devices share the same operation here,
there's no need to call it indirectly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

drivers/net/wireless/iwlwifi/iwl-1000.c

@@ -194,7 +194,6 @@ static struct iwl_lib_ops iwl1000_lib = {
 	.update_chain_flags = iwl_update_chain_flags,
 	.apm_ops = {
 		.init = iwl_apm_init,
-		.stop = iwl_apm_stop,
 		.config = iwl1000_nic_config,
 	},
 	.eeprom_ops = {

drivers/net/wireless/iwlwifi/iwl-3945.c

@@ -2704,7 +2704,6 @@ static struct iwl_lib_ops iwl3945_lib = {
 	.dump_nic_error_log = iwl3945_dump_nic_error_log,
 	.apm_ops = {
 		.init = iwl3945_apm_init,
-		.stop = iwl_apm_stop,
 		.config = iwl3945_nic_config,
 	},
 	.eeprom_ops = {

drivers/net/wireless/iwlwifi/iwl-4965.c

@@ -2266,7 +2266,6 @@ static struct iwl_lib_ops iwl4965_lib = {
 	.set_channel_switch = iwl4965_hw_channel_switch,
 	.apm_ops = {
 		.init = iwl_apm_init,
-		.stop = iwl_apm_stop,
 		.config = iwl4965_nic_config,
 	},
 	.eeprom_ops = {

drivers/net/wireless/iwlwifi/iwl-5000.c

@@ -368,7 +368,6 @@ static struct iwl_lib_ops iwl5000_lib = {
 	.set_channel_switch = iwl5000_hw_channel_switch,
 	.apm_ops = {
 		.init = iwl_apm_init,
-		.stop = iwl_apm_stop,
 		.config = iwl5000_nic_config,
 	},
 	.eeprom_ops = {
@@ -437,7 +436,6 @@ static struct iwl_lib_ops iwl5150_lib = {
 	.set_channel_switch = iwl5000_hw_channel_switch,
 	.apm_ops = {
 		.init = iwl_apm_init,
-		.stop = iwl_apm_stop,
 		.config = iwl5000_nic_config,
 	},
 	.eeprom_ops = {

drivers/net/wireless/iwlwifi/iwl-6000.c

@@ -308,7 +308,6 @@ static struct iwl_lib_ops iwl6000_lib = {
 	.set_channel_switch = iwl6000_hw_channel_switch,
 	.apm_ops = {
 		.init = iwl_apm_init,
-		.stop = iwl_apm_stop,
 		.config = iwl6000_nic_config,
 	},
 	.eeprom_ops = {
@@ -380,7 +379,6 @@ static struct iwl_lib_ops iwl6000g2b_lib = {
 	.set_channel_switch = iwl6000_hw_channel_switch,
 	.apm_ops = {
 		.init = iwl_apm_init,
-		.stop = iwl_apm_stop,
 		.config = iwl6000_nic_config,
 	},
 	.eeprom_ops = {

drivers/net/wireless/iwlwifi/iwl-agn.c

@@ -2983,7 +2983,7 @@ static void __iwl_down(struct iwl_priv *priv)
 	iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
 
 	/* Stop the device, and put it in low power state */
-	priv->cfg->ops->lib->apm_ops.stop(priv);
+	iwl_apm_stop(priv);
 
  exit:
 	memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp));
@@ -4597,7 +4597,7 @@ static void __devexit iwl_pci_remove(struct pci_dev *pdev)
 	 * paths to avoid running iwl_down() at all before leaving driver.
 	 * This (inexpensive) call *makes sure* device is reset.
 	 */
-	priv->cfg->ops->lib->apm_ops.stop(priv);
+	iwl_apm_stop(priv);
 
 	iwl_tt_exit(priv);
 

drivers/net/wireless/iwlwifi/iwl-core.c

@@ -2599,7 +2599,7 @@ int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 	 * it will not call apm_ops.stop() to stop the DMA operation.
 	 * Calling apm_ops.stop here to make sure we stop the DMA.
 	 */
-	priv->cfg->ops->lib->apm_ops.stop(priv);
+	iwl_apm_stop(priv);
 
 	pci_save_state(pdev);
 	pci_disable_device(pdev);

drivers/net/wireless/iwlwifi/iwl-core.h

@@ -117,7 +117,6 @@ struct iwl_hcmd_utils_ops {
 
 struct iwl_apm_ops {
 	int (*init)(struct iwl_priv *priv);
-	void (*stop)(struct iwl_priv *priv);
 	void (*config)(struct iwl_priv *priv);
 };
 

drivers/net/wireless/iwlwifi/iwl-eeprom.c

@@ -603,7 +603,7 @@ int iwl_eeprom_init(struct iwl_priv *priv)
 	if (ret)
 		iwl_eeprom_free(priv);
 	/* Reset chip to save power until we load uCode during "up". */
-	priv->cfg->ops->lib->apm_ops.stop(priv);
+	iwl_apm_stop(priv);
 alloc_err:
 	return ret;
 }

drivers/net/wireless/iwlwifi/iwl3945-base.c

@@ -2637,7 +2637,7 @@ static void __iwl3945_down(struct iwl_priv *priv)
 	udelay(5);
 
 	/* Stop the device, and put it in low power state */
-	priv->cfg->ops->lib->apm_ops.stop(priv);
+	iwl_apm_stop(priv);
 
  exit:
 	memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp));
@@ -4212,7 +4212,7 @@ static void __devexit iwl3945_pci_remove(struct pci_dev *pdev)
 	 * paths to avoid running iwl_down() at all before leaving driver.
 	 * This (inexpensive) call *makes sure* device is reset.
 	 */
-	priv->cfg->ops->lib->apm_ops.stop(priv);
+	iwl_apm_stop(priv);
 
 	/* make sure we flush any pending irq or
 	 * tasklet for the driver