Commit 157d2644 authored by Haojian Zhuang's avatar Haojian Zhuang Committed by Haojian Zhuang

ARM: pxa: change gpio to platform device

Remove most gpio macros and change gpio driver to platform driver.
Signed-off-by: default avatarHaojian Zhuang <haojian.zhuang@marvell.com>
parent 9bf448c6
......@@ -591,6 +591,7 @@ config ARCH_MMP
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select GENERIC_CLOCKEVENTS
select GPIO_PXA
select HAVE_SCHED_CLOCK
select TICK_ONESHOT
select PLAT_PXA
......@@ -673,6 +674,7 @@ config ARCH_PXA
select CLKSRC_MMIO
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
select GPIO_PXA
select HAVE_SCHED_CLOCK
select TICK_ONESHOT
select PLAT_PXA
......
......@@ -231,6 +231,7 @@ static void __init common_init(void)
pxa168_add_nand(&aspenite_nand_info);
pxa168_add_fb(&aspenite_lcd_info);
pxa168_add_keypad(&aspenite_keypad_info);
platform_device_register(&pxa168_device_gpio);
/* off-chip devices */
platform_device_register(&smc91x_device);
......
......@@ -38,6 +38,7 @@ static void __init avengers_lite_init(void)
/* on-chip devices */
pxa168_add_uart(2);
platform_device_register(&pxa168_device_gpio);
}
MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform")
......
......@@ -202,6 +202,7 @@ static void __init brownstone_init(void)
/* on-chip devices */
mmp2_add_uart(1);
mmp2_add_uart(3);
platform_device_register(&mmp2_device_gpio);
mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(brownstone_twsi1_info));
mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
mmp2_add_sdhost(2, &mmp2_sdh_platdata_mmc2); /* eMMC */
......
......@@ -110,6 +110,7 @@ static void __init flint_init(void)
/* on-chip devices */
mmp2_add_uart(1);
mmp2_add_uart(2);
platform_device_register(&mmp2_device_gpio);
/* off-chip devices */
platform_device_register(&smc91x_device);
......
......@@ -184,6 +184,7 @@ static void __init gplugd_init(void)
pxa168_add_uart(3);
pxa168_add_ssp(0);
pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info));
platform_device_register(&pxa168_device_gpio);
pxa168_add_eth(&gplugd_eth_platform_data);
}
......
......@@ -3,7 +3,6 @@
#include <asm-generic/gpio.h>
#define __gpio_is_inverted(gpio) (0)
#define __gpio_is_occupied(gpio) (0)
#include <mach/cputype.h>
#endif /* __ASM_MACH_GPIO_H */
......@@ -32,6 +32,8 @@ extern struct pxa_device_desc mmp2_device_sdh3;
extern struct pxa_device_desc mmp2_device_asram;
extern struct pxa_device_desc mmp2_device_isram;
extern struct platform_device mmp2_device_gpio;
static inline int mmp2_add_uart(int id)
{
struct pxa_device_desc *d = NULL;
......
......@@ -42,6 +42,8 @@ struct pxa168_usb_pdata {
/* pdata can be NULL */
int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata);
extern struct platform_device pxa168_device_gpio;
static inline int pxa168_add_uart(int id)
{
struct pxa_device_desc *d = NULL;
......
......@@ -21,6 +21,8 @@ extern struct pxa_device_desc pxa910_device_pwm3;
extern struct pxa_device_desc pxa910_device_pwm4;
extern struct pxa_device_desc pxa910_device_nand;
extern struct platform_device pxa910_device_gpio;
static inline int pxa910_add_uart(int id)
{
struct pxa_device_desc *d = NULL;
......
......@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <asm/hardware/cache-tauros2.h>
......@@ -24,7 +25,6 @@
#include <mach/irqs.h>
#include <mach/dma.h>
#include <mach/mfp.h>
#include <mach/gpio-pxa.h>
#include <mach/devices.h>
#include <mach/mmp2.h>
......@@ -33,8 +33,6 @@
#define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000)
#define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x9c)
static struct mfp_addr_map mmp2_addr_map[] __initdata = {
MFP_ADDR_X(GPIO0, GPIO58, 0x54),
......@@ -101,12 +99,6 @@ static void __init mmp2_init_gpio(void)
/* enable GPIO clock */
__raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_MMP2_GPIO);
/* unmask GPIO edge detection for all 6 banks -- APMASKx */
for (i = 0; i < 6; i++)
__raw_writel(0xffffffff, APMASK(i));
pxa_init_gpio(IRQ_MMP2_GPIO, 0, 167, NULL);
}
void __init mmp2_init_irq(void)
......@@ -230,3 +222,21 @@ MMP2_DEVICE(asram, "asram", -1, NONE, 0xe0000000, 0x4000);
/* 0xd1000000 ~ 0xd101ffff is reserved for secure processor */
MMP2_DEVICE(isram, "isram", -1, NONE, 0xd1020000, 0x18000);
struct resource mmp2_resource_gpio[] = {
{
.start = 0xd4019000,
.end = 0xd4019fff,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_MMP2_GPIO,
.end = IRQ_MMP2_GPIO,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device mmp2_device_gpio = {
.name = "pxa-gpio",
.id = -1,
.num_resources = ARRAY_SIZE(mmp2_resource_gpio),
.resource = mmp2_resource_gpio,
};
......@@ -13,6 +13,7 @@
#include <linux/list.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <asm/mach/time.h>
#include <mach/addr-map.h>
......@@ -20,7 +21,6 @@
#include <mach/regs-apbc.h>
#include <mach/regs-apmu.h>
#include <mach/irqs.h>
#include <mach/gpio-pxa.h>
#include <mach/dma.h>
#include <mach/devices.h>
#include <mach/mfp.h>
......@@ -43,20 +43,12 @@ static struct mfp_addr_map pxa168_mfp_addr_map[] __initdata =
MFP_ADDR_END,
};
#define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x09c)
static void __init pxa168_init_gpio(void)
{
int i;
/* enable GPIO clock */
__raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_PXA168_GPIO);
/* unmask GPIO edge detection for all 4 banks - APMASKx */
for (i = 0; i < 4; i++)
__raw_writel(0xffffffff, APMASK(i));
pxa_init_gpio(IRQ_PXA168_GPIOX, 0, 127, NULL);
}
void __init pxa168_init_irq(void)
......@@ -174,6 +166,25 @@ PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8);
PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c);
PXA168_DEVICE(eth, "pxa168-eth", -1, MFU, 0xc0800000, 0x0fff);
struct resource pxa168_resource_gpio[] = {
{
.start = 0xd4019000,
.end = 0xd4019fff,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_PXA168_GPIOX,
.end = IRQ_PXA168_GPIOX,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa168_device_gpio = {
.name = "pxa-gpio",
.id = -1,
.num_resources = ARRAY_SIZE(pxa168_resource_gpio),
.resource = pxa168_resource_gpio,
};
struct resource pxa168_usb_host_resources[] = {
/* USB Host conroller register base */
[0] = {
......
......@@ -12,6 +12,7 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <asm/mach/time.h>
#include <mach/addr-map.h>
......@@ -19,7 +20,6 @@
#include <mach/regs-apmu.h>
#include <mach/cputype.h>
#include <mach/irqs.h>
#include <mach/gpio-pxa.h>
#include <mach/dma.h>
#include <mach/mfp.h>
#include <mach/devices.h>
......@@ -77,20 +77,12 @@ static struct mfp_addr_map pxa910_mfp_addr_map[] __initdata =
MFP_ADDR_END,
};
#define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x09c)
static void __init pxa910_init_gpio(void)
{
int i;
/* enable GPIO clock */
__raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_PXA910_GPIO);
/* unmask GPIO edge detection for all 4 banks - APMASKx */
for (i = 0; i < 4; i++)
__raw_writel(0xffffffff, APMASK(i));
pxa_init_gpio(IRQ_PXA910_AP_GPIO, 0, 127, NULL);
}
void __init pxa910_init_irq(void)
......@@ -179,3 +171,22 @@ PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10);
PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10);
PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10);
PXA910_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
struct resource pxa910_resource_gpio[] = {
{
.start = 0xd4019000,
.end = 0xd4019fff,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_PXA910_AP_GPIO,
.end = IRQ_PXA910_AP_GPIO,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa910_device_gpio = {
.name = "pxa-gpio",
.id = -1,
.num_resources = ARRAY_SIZE(pxa910_resource_gpio),
.resource = pxa910_resource_gpio,
};
......@@ -94,6 +94,7 @@ static void __init tavorevb_init(void)
/* on-chip devices */
pxa910_add_uart(1);
platform_device_register(&pxa910_device_gpio);
/* off-chip devices */
platform_device_register(&smc91x_device);
......
......@@ -78,6 +78,7 @@ static void __init teton_bga_init(void)
pxa168_add_uart(1);
pxa168_add_keypad(&teton_bga_keypad_info);
pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(teton_bga_i2c_info));
platform_device_register(&pxa168_device_gpio);
}
MACHINE_START(TETON_BGA, "PXA168-based Teton BGA Development Platform")
......
......@@ -123,6 +123,7 @@ static struct platform_device ttc_dkb_device_onenand = {
};
static struct platform_device *ttc_dkb_devices[] = {
&pxa910_device_gpio,
&ttc_dkb_device_onenand,
};
......
......@@ -1051,6 +1051,36 @@ struct platform_device pxa3xx_device_ssp4 = {
};
#endif /* CONFIG_PXA3xx || CONFIG_PXA95x */
struct resource pxa_resource_gpio[] = {
{
.start = 0x40e00000,
.end = 0x40e0ffff,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_GPIO0,
.end = IRQ_GPIO0,
.name = "gpio0",
.flags = IORESOURCE_IRQ,
}, {
.start = IRQ_GPIO1,
.end = IRQ_GPIO1,
.name = "gpio1",
.flags = IORESOURCE_IRQ,
}, {
.start = IRQ_GPIO_2_x,
.end = IRQ_GPIO_2_x,
.name = "gpio_mux",
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa_device_gpio = {
.name = "pxa-gpio",
.id = -1,
.num_resources = ARRAY_SIZE(pxa_resource_gpio),
.resource = pxa_resource_gpio,
};
/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
* See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */
void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
......
......@@ -16,6 +16,7 @@ extern struct platform_device pxa_device_ficp;
extern struct platform_device sa1100_device_rtc;
extern struct platform_device pxa_device_rtc;
extern struct platform_device pxa_device_ac97;
extern struct platform_device pxa_device_gpio;
extern struct platform_device pxa27x_device_i2c_power;
extern struct platform_device pxa27x_device_ohci;
......
/*
* Written by Philipp Zabel <philipp.zabel@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#ifndef __MACH_PXA_GPIO_PXA_H
#define __MACH_PXA_GPIO_PXA_H
#include <mach/irqs.h>
#include <mach/hardware.h>
#define GPIO_REGS_VIRT io_p2v(0x40E00000)
#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
/* GPIO Pin Level Registers */
#define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00)
#define GPLR1 GPIO_REG(BANK_OFF(1) + 0x00)
#define GPLR2 GPIO_REG(BANK_OFF(2) + 0x00)
#define GPLR3 GPIO_REG(BANK_OFF(3) + 0x00)
/* GPIO Pin Direction Registers */
#define GPDR0 GPIO_REG(BANK_OFF(0) + 0x0c)
#define GPDR1 GPIO_REG(BANK_OFF(1) + 0x0c)
#define GPDR2 GPIO_REG(BANK_OFF(2) + 0x0c)
#define GPDR3 GPIO_REG(BANK_OFF(3) + 0x0c)
/* GPIO Pin Output Set Registers */
#define GPSR0 GPIO_REG(BANK_OFF(0) + 0x18)
#define GPSR1 GPIO_REG(BANK_OFF(1) + 0x18)
#define GPSR2 GPIO_REG(BANK_OFF(2) + 0x18)
#define GPSR3 GPIO_REG(BANK_OFF(3) + 0x18)
/* GPIO Pin Output Clear Registers */
#define GPCR0 GPIO_REG(BANK_OFF(0) + 0x24)
#define GPCR1 GPIO_REG(BANK_OFF(1) + 0x24)
#define GPCR2 GPIO_REG(BANK_OFF(2) + 0x24)
#define GPCR3 GPIO_REG(BANK_OFF(3) + 0x24)
/* GPIO Rising Edge Detect Registers */
#define GRER0 GPIO_REG(BANK_OFF(0) + 0x30)
#define GRER1 GPIO_REG(BANK_OFF(1) + 0x30)
#define GRER2 GPIO_REG(BANK_OFF(2) + 0x30)
#define GRER3 GPIO_REG(BANK_OFF(3) + 0x30)
/* GPIO Falling Edge Detect Registers */
#define GFER0 GPIO_REG(BANK_OFF(0) + 0x3c)
#define GFER1 GPIO_REG(BANK_OFF(1) + 0x3c)
#define GFER2 GPIO_REG(BANK_OFF(2) + 0x3c)
#define GFER3 GPIO_REG(BANK_OFF(3) + 0x3c)
/* GPIO Edge Detect Status Registers */
#define GEDR0 GPIO_REG(BANK_OFF(0) + 0x48)
#define GEDR1 GPIO_REG(BANK_OFF(1) + 0x48)
#define GEDR2 GPIO_REG(BANK_OFF(2) + 0x48)
#define GEDR3 GPIO_REG(BANK_OFF(3) + 0x48)
/* GPIO Alternate Function Select Registers */
#define GAFR0_L GPIO_REG(0x0054)
#define GAFR0_U GPIO_REG(0x0058)
#define GAFR1_L GPIO_REG(0x005C)
#define GAFR1_U GPIO_REG(0x0060)
#define GAFR2_L GPIO_REG(0x0064)
#define GAFR2_U GPIO_REG(0x0068)
#define GAFR3_L GPIO_REG(0x006C)
#define GAFR3_U GPIO_REG(0x0070)
/* More handy macros. The argument is a literal GPIO number. */
#define GPIO_bit(x) (1 << ((x) & 0x1f))
#define GPLR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x00)
#define GPDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x0c)
#define GPSR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x18)
#define GPCR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x24)
#define GRER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x30)
#define GFER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x3c)
#define GEDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x48)
#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2))
#define gpio_to_bank(gpio) ((gpio) >> 5)
#ifdef CONFIG_CPU_PXA26x
/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
* as well as their Alternate Function value being '1' for GPIO in GAFRx.
*/
static inline int __gpio_is_inverted(unsigned gpio)
{
return cpu_is_pxa25x() && gpio > 85;
}
#else
static inline int __gpio_is_inverted(unsigned gpio) { return 0; }
#endif
/*
* On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
* function of a GPIO, and GPDRx cannot be altered once configured. It
* is attributed as "occupied" here (I know this terminology isn't
* accurate, you are welcome to propose a better one :-)
*/
static inline int __gpio_is_occupied(unsigned gpio)
{
if (cpu_is_pxa27x() || cpu_is_pxa25x()) {
int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3;
int dir = GPDR(gpio) & GPIO_bit(gpio);
if (__gpio_is_inverted(gpio))
return af != 1 || dir == 0;
else
return af != 0 || dir != 0;
} else
return GPDR(gpio) & GPIO_bit(gpio);
}
#include <plat/gpio-pxa.h>
#endif /* __MACH_PXA_GPIO_PXA_H */
......@@ -25,7 +25,8 @@
#define __ASM_ARCH_PXA_GPIO_H
#include <asm-generic/gpio.h>
/* The defines for the driver are needed for the accelerated accessors */
#include "gpio-pxa.h"
#include <mach/irqs.h>
#include <mach/hardware.h>
#endif
......@@ -131,8 +131,6 @@
#define PCC_VS2 (1 << 1)
#define PCC_VS1 (1 << 0)
#define PCC_DETECT(x) (GPLR(7 + (x)) & GPIO_bit(7 + (x)))
/* A listing of interrupts used by external hardware devices */
#define TOUCH_PANEL_IRQ PXA_GPIO_TO_IRQ(5)
......
#ifndef __ASM_ARCH_LITTLETON_H
#define __ASM_ARCH_LITTLETON_H
#include <mach/gpio-pxa.h>
#define LITTLETON_ETH_PHYS 0x30000000
#define LITTLETON_GPIO_LCD_CS (17)
......
......@@ -22,7 +22,6 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/gpio-pxa.h>
#include "generic.h"
......@@ -122,7 +121,7 @@ asmlinkage void __exception_irq_entry ichp_handle_irq(struct pt_regs *regs)
} while (1);
}
void __init pxa_init_irq(int irq_nr, set_wake_t fn)
void __init pxa_init_irq(int irq_nr, int (*fn)(struct irq_data *, unsigned int))
{
int irq, i, n;
......
......@@ -13,6 +13,7 @@
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/gpio-pxa.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
......@@ -20,7 +21,6 @@
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa2xx.h>
#include <mach/gpio-pxa.h>
#include "generic.h"
......@@ -29,6 +29,10 @@
#define GAFR_L(x) __GAFR(0, x)
#define GAFR_U(x) __GAFR(1, x)
#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
#define GPLR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5))
#define GPDR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x0c)
#define PWER_WE35 (1 << 24)
struct gpio_desc {
......
......@@ -17,6 +17,7 @@
* need be.
*/
#include <linux/gpio.h>
#include <linux/gpio-pxa.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
......@@ -312,14 +313,12 @@ static int pxa25x_set_wake(struct irq_data *d, unsigned int on)
void __init pxa25x_init_irq(void)
{
pxa_init_irq(32, pxa25x_set_wake);
pxa_init_gpio(IRQ_GPIO_2_x, 2, 84, pxa25x_set_wake);
}
#ifdef CONFIG_CPU_PXA26x
void __init pxa26x_init_irq(void)
{
pxa_init_irq(32, pxa25x_set_wake);
pxa_init_gpio(IRQ_GPIO_2_x, 2, 89, pxa25x_set_wake);
}
#endif
......
......@@ -12,6 +12,7 @@
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/gpio-pxa.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
......@@ -386,7 +387,6 @@ static int pxa27x_set_wake(struct irq_data *d, unsigned int on)
void __init pxa27x_init_irq(void)
{
pxa_init_irq(34, pxa27x_set_wake);
pxa_init_gpio(IRQ_GPIO_2_x, 2, 120, pxa27x_set_wake);
}
static struct map_desc pxa27x_io_desc[] __initdata = {
......@@ -422,6 +422,7 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
}
static struct platform_device *devices[] __initdata = {
&pxa_device_gpio,
&pxa27x_device_udc,
&pxa_device_pmu,
&pxa_device_i2s,
......
......@@ -25,7 +25,6 @@
#include <asm/mach/map.h>
#include <asm/suspend.h>
#include <mach/hardware.h>
#include <mach/gpio-pxa.h>
#include <mach/pxa3xx-regs.h>
#include <mach/reset.h>
#include <mach/ohci.h>
......@@ -365,7 +364,8 @@ static struct irq_chip pxa_ext_wakeup_chip = {
.irq_set_type = pxa_set_ext_wakeup_type,
};
static void __init pxa_init_ext_wakeup_irq(set_wake_t fn)
static void __init pxa_init_ext_wakeup_irq(int (*fn)(struct irq_data *,
unsigned int))
{
int irq;
......@@ -388,7 +388,6 @@ void __init pxa3xx_init_irq(void)
pxa_init_irq(56, pxa3xx_set_wake);
pxa_init_ext_wakeup_irq(pxa3xx_set_wake);
pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL);
}
static struct map_desc pxa3xx_io_desc[] __initdata = {
......@@ -417,6 +416,7 @@ void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
}
static struct platform_device *devices[] __initdata = {
&pxa_device_gpio,
&pxa27x_device_udc,
&pxa_device_pmu,
&pxa_device_i2s,
......
......@@ -20,7 +20,6 @@
#include <linux/syscore_ops.h>
#include <mach/hardware.h>
#include <mach/gpio-pxa.h>
#include <mach/pxa3xx-regs.h>
#include <mach/pxa930.h>
#include <mach/reset.h>
......@@ -235,7 +234,6 @@ static struct clk_lookup pxa95x_clkregs[] = {
void __init pxa95x_init_irq(void)
{
pxa_init_irq(96, NULL);
pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL);
}
/*
......@@ -248,6 +246,7 @@ void __init pxa95x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
}
static struct platform_device *devices[] __initdata = {
&pxa_device_gpio,
&sa1100_device_rtc,
&pxa_device_rtc,
&pxa27x_device_ssp1,
......
#ifndef __PLAT_PXA_GPIO_H
#define __PLAT_PXA_GPIO_H
struct irq_data;
/*
* We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
* one set of registers. The register offsets are organized below:
*
* GPLR GPDR GPSR GPCR GRER GFER GEDR
* BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048
* BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C
* BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050
*
* BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148
* BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C
* BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150
*
* NOTE:
* BANK 3 is only available on PXA27x and later processors.
* BANK 4 and 5 are only available on PXA935
*/
#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n))
#define GPLR_OFFSET 0x00
#define GPDR_OFFSET 0x0C
#define GPSR_OFFSET 0x18
#define GPCR_OFFSET 0x24
#define GRER_OFFSET 0x30
#define GFER_OFFSET 0x3C
#define GEDR_OFFSET 0x48
/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
* Those cases currently cause holes in the GPIO number space, the
* actual number of the last GPIO is recorded by 'pxa_last_gpio'.
*/
extern int pxa_last_gpio;
typedef int (*set_wake_t)(struct irq_data *d, unsigned int on);
extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn);
extern int pxa_irq_to_gpio(int irq);
#endif /* __PLAT_PXA_GPIO_H */
......@@ -141,6 +141,12 @@ config GPIO_PL061
help
Say yes here to support the PrimeCell PL061 GPIO device
config GPIO_PXA
bool "PXA GPIO support"
depends on ARCH_PXA || ARCH_MMP
help
Say yes here to support the PXA GPIO device
config GPIO_XILINX
bool "Xilinx GPIO support"
depends on PPC_OF || MICROBLAZE
......
......@@ -40,7 +40,7 @@ obj-$(CONFIG_GPIO_PCA953X) += gpio-pca953x.o
obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o
obj-$(CONFIG_GPIO_PCH) += gpio-pch.o
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
obj-$(CONFIG_PLAT_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
obj-$(CONFIG_PLAT_SAMSUNG) += gpio-samsung.o
obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
......
......@@ -12,13 +12,42 @@
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/gpio-pxa.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/syscore_ops.h>
#include <linux/slab.h>
#include <mach/gpio-pxa.h>
/*
* We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
* one set of registers. The register offsets are organized below:
*
* GPLR GPDR GPSR GPCR GRER GFER GEDR
* BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048
* BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C
* BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050
*
* BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148
* BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C
* BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150
*
* NOTE:
* BANK 3 is only available on PXA27x and later processors.
* BANK 4 and 5 are only available on PXA935
*/
#define GPLR_OFFSET 0x00
#define GPDR_OFFSET 0x0C
#define GPSR_OFFSET 0x18
#define GPCR_OFFSET 0x24
#define GRER_OFFSET 0x30
#define GFER_OFFSET 0x3C
#define GEDR_OFFSET 0x48
#define GAFR_OFFSET 0x54
#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
int pxa_last_gpio;
......@@ -52,6 +81,7 @@ enum {
static DEFINE_SPINLOCK(gpio_lock);
static struct pxa_gpio_chip *pxa_gpio_chips;
static int gpio_type;
static void __iomem *gpio_reg_base;
#define for_each_gpio_chip(i, c) \
for (i = 0, c = &pxa_gpio_chips[0]; i <= pxa_last_gpio; i += 32, c++)
......@@ -76,6 +106,53 @@ static inline int gpio_is_mmp_type(int type)
return (type & MMP_GPIO) != 0;
}
/* GPIO86/87/88/89 on PXA26x have their direction bits in PXA_GPDR(2 inverted,
* as well as their Alternate Function value being '1' for GPIO in GAFRx.
*/
static inline int __gpio_is_inverted(int gpio)
{
if ((gpio_type == PXA26X_GPIO) && (gpio > 85))
return 1;
return 0;
}
/*
* On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
* function of a GPIO, and GPDRx cannot be altered once configured. It
* is attributed as "occupied" here (I know this terminology isn't
* accurate, you are welcome to propose a better one :-)
*/
static inline int __gpio_is_occupied(unsigned gpio)
{
struct pxa_gpio_chip *pxachip;
void __iomem *base;
unsigned long gafr = 0, gpdr = 0;
int ret, af = 0, dir = 0;
pxachip = gpio_to_pxachip(gpio);
base = gpio_chip_base(&pxachip->chip);
gpdr = readl_relaxed(base + GPDR_OFFSET);
switch (gpio_type) {
case PXA25X_GPIO:
case PXA26X_GPIO:
case PXA27X_GPIO:
gafr = readl_relaxed(base + GAFR_OFFSET);
af = (gafr >> ((gpio & 0xf) * 2)) & 0x3;
dir = gpdr & GPIO_bit(gpio);
if (__gpio_is_inverted(gpio))
ret = (af != 1) || (dir == 0);
else
ret = (af != 0) || (dir != 0);
break;
default:
ret = gpdr & GPIO_bit(gpio);
break;
}
return ret;
}
#ifdef CONFIG_ARCH_PXA
static inline int __pxa_gpio_to_irq(int gpio)
{
......@@ -187,7 +264,7 @@ static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
(value ? GPSR_OFFSET : GPCR_OFFSET));
}
static int __init pxa_init_gpio_chip(int gpio_end)
static int __devinit pxa_init_gpio_chip(int gpio_end)
{
int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1;
struct pxa_gpio_chip *chips;
......@@ -202,7 +279,7 @@ static int __init pxa_init_gpio_chip(int gpio_end)
struct gpio_chip *c = &chips[i].chip;
sprintf(chips[i].label, "gpio-%d", i);
chips[i].regbase = GPIO_BANK(i);
chips[i].regbase = gpio_reg_base + BANK_OFF(i);
c->base = gpio;
c->label = chips[i].label;
......@@ -384,17 +461,35 @@ static int pxa_gpio_nums(void)
return count;
}
void __init pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn)
static int __devinit pxa_gpio_probe(struct platform_device *pdev)
{
struct pxa_gpio_chip *c;
struct resource *res;
int gpio, irq;
int irq0 = 0, irq1 = 0, irq_mux, gpio_offset = 0;
pxa_last_gpio = pxa_gpio_nums();
if (!pxa_last_gpio)
return;
return -EINVAL;
irq0 = platform_get_irq_byname(pdev, "gpio0");
irq1 = platform_get_irq_byname(pdev, "gpio1");
irq_mux = platform_get_irq_byname(pdev, "gpio_mux");
if ((irq0 > 0 && irq1 <= 0) || (irq0 <= 0 && irq1 > 0)
|| (irq_mux <= 0))
return -EINVAL;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -EINVAL;
gpio_reg_base = ioremap(res->start, resource_size(res));
if (!gpio_reg_base)
return -EINVAL;
if (irq0 > 0)
gpio_offset = 2;
/* Initialize GPIO chips */
pxa_init_gpio_chip(end);
pxa_init_gpio_chip(pxa_last_gpio);
/* clear all GPIO edge detects */
for_each_gpio_chip(gpio, c) {
......@@ -417,16 +512,29 @@ void __init pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn)
irq_set_chained_handler(IRQ_GPIO1, pxa_gpio_demux_handler);
#endif
for (irq = gpio_to_irq(start); irq <= gpio_to_irq(end); irq++) {
for (irq = gpio_to_irq(gpio_offset);
irq <= gpio_to_irq(pxa_last_gpio); irq++) {
irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip,
handle_edge_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
/* Install handler for GPIO>=2 edge detect interrupts */
irq_set_chained_handler(mux_irq, pxa_gpio_demux_handler);
pxa_muxed_gpio_chip.irq_set_wake = fn;
irq_set_chained_handler(irq_mux, pxa_gpio_demux_handler);
return 0;
}
static struct platform_driver pxa_gpio_driver = {
.probe = pxa_gpio_probe,
.driver = {
.name = "pxa-gpio",
},
};
static int __init pxa_gpio_init(void)
{
return platform_driver_register(&pxa_gpio_driver);
}
postcore_initcall(pxa_gpio_init);
#ifdef CONFIG_PM
static int pxa_gpio_suspend(void)
......@@ -470,3 +578,10 @@ struct syscore_ops pxa_gpio_syscore_ops = {
.suspend = pxa_gpio_suspend,
.resume = pxa_gpio_resume,
};
static int __init pxa_gpio_sysinit(void)
{
register_syscore_ops(&pxa_gpio_syscore_ops);
return 0;
}
postcore_initcall(pxa_gpio_sysinit);
#ifndef __GPIO_PXA_H
#define __GPIO_PXA_H
#define GPIO_bit(x) (1 << ((x) & 0x1f))
#define gpio_to_bank(gpio) ((gpio) >> 5)
/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
* Those cases currently cause holes in the GPIO number space, the
* actual number of the last GPIO is recorded by 'pxa_last_gpio'.
*/
extern int pxa_last_gpio;
extern int pxa_irq_to_gpio(int irq);
#endif /* __GPIO_PXA_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment