Commit 157fa283 authored by Yaniv Rosner's avatar Yaniv Rosner Committed by David S. Miller

bnx2x: Fix BCM578xx-B0 MDIO access

Fix MDIO access to Warpcore on new chip version of 578xx.
Signed-off-by: default avatarYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: default avatarEilon Greenstein <eilong@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent de6f3377
......@@ -2953,7 +2953,9 @@ static int bnx2x_cl45_read(struct bnx2x *bp, struct bnx2x_phy *phy,
u32 val;
u16 i;
int rc = 0;
if (phy->flags & FLAGS_MDC_MDIO_WA_B0)
bnx2x_bits_en(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS,
EMAC_MDIO_STATUS_10MB);
/* address */
val = ((phy->addr << 21) | (devad << 16) | reg |
EMAC_MDIO_COMM_COMMAND_ADDRESS |
......@@ -3007,6 +3009,9 @@ static int bnx2x_cl45_read(struct bnx2x *bp, struct bnx2x_phy *phy,
}
}
if (phy->flags & FLAGS_MDC_MDIO_WA_B0)
bnx2x_bits_dis(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS,
EMAC_MDIO_STATUS_10MB);
return rc;
}
......@@ -3016,6 +3021,9 @@ static int bnx2x_cl45_write(struct bnx2x *bp, struct bnx2x_phy *phy,
u32 tmp;
u8 i;
int rc = 0;
if (phy->flags & FLAGS_MDC_MDIO_WA_B0)
bnx2x_bits_en(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS,
EMAC_MDIO_STATUS_10MB);
/* address */
......@@ -3069,7 +3077,9 @@ static int bnx2x_cl45_write(struct bnx2x *bp, struct bnx2x_phy *phy,
bnx2x_cl45_read(bp, phy, devad, 0xf, &temp_val);
}
}
if (phy->flags & FLAGS_MDC_MDIO_WA_B0)
bnx2x_bits_dis(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS,
EMAC_MDIO_STATUS_10MB);
return rc;
}
......@@ -11118,6 +11128,8 @@ static int bnx2x_populate_int_phy(struct bnx2x *bp, u32 shmem_base, u8 port,
*/
if (CHIP_REV(bp) == CHIP_REV_Ax)
phy->flags |= FLAGS_MDC_MDIO_WA;
else
phy->flags |= FLAGS_MDC_MDIO_WA_B0;
} else {
switch (switch_cfg) {
case SWITCH_CFG_1G:
......
......@@ -145,6 +145,7 @@ struct bnx2x_phy {
#define FLAGS_SFP_NOT_APPROVED (1<<7)
#define FLAGS_MDC_MDIO_WA (1<<8)
#define FLAGS_DUMMY_READ (1<<9)
#define FLAGS_MDC_MDIO_WA_B0 (1<<10)
#define FLAGS_TX_ERROR_CHECK (1<<12)
/* preemphasis values for the rx side */
......
......@@ -5624,8 +5624,9 @@
#define EMAC_MDIO_COMM_START_BUSY (1L<<29)
#define EMAC_MDIO_MODE_AUTO_POLL (1L<<4)
#define EMAC_MDIO_MODE_CLAUSE_45 (1L<<31)
#define EMAC_MDIO_MODE_CLOCK_CNT (0x3fL<<16)
#define EMAC_MDIO_MODE_CLOCK_CNT (0x3ffL<<16)
#define EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT 16
#define EMAC_MDIO_STATUS_10MB (1L<<1)
#define EMAC_MODE_25G_MODE (1L<<5)
#define EMAC_MODE_HALF_DUPLEX (1L<<1)
#define EMAC_MODE_PORT_GMII (2L<<2)
......@@ -5636,6 +5637,7 @@
#define EMAC_REG_EMAC_MAC_MATCH 0x10
#define EMAC_REG_EMAC_MDIO_COMM 0xac
#define EMAC_REG_EMAC_MDIO_MODE 0xb4
#define EMAC_REG_EMAC_MDIO_STATUS 0xb0
#define EMAC_REG_EMAC_MODE 0x0
#define EMAC_REG_EMAC_RX_MODE 0xc8
#define EMAC_REG_EMAC_RX_MTU_SIZE 0x9c
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment