Commit 16032be5 authored by Nikolay Aleksandrov's avatar Nikolay Aleksandrov Committed by David S. Miller

virtio_net: add ethtool support for set and get of settings

This patch allows the user to set and retrieve speed and duplex of the
virtio_net device via ethtool. Having this functionality is very helpful
for simulating different environments and also enables the virtio_net
device to participate in operations where proper speed and duplex are
required (e.g. currently bonding lacp mode requires full duplex). Custom
speed and duplex are not allowed, the user-supplied settings are validated
before applying.

Example:
$ ethtool eth1
Settings for eth1:
...
	Speed: Unknown!
	Duplex: Unknown! (255)
$ ethtool -s eth1 speed 1000 duplex full
$ ethtool eth1
Settings for eth1:
...
	Speed: 1000Mb/s
	Duplex: Full

Based on a patch by Roopa Prabhu.
Signed-off-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 103a8ad1
...@@ -146,6 +146,10 @@ struct virtnet_info { ...@@ -146,6 +146,10 @@ struct virtnet_info {
virtio_net_ctrl_ack ctrl_status; virtio_net_ctrl_ack ctrl_status;
u8 ctrl_promisc; u8 ctrl_promisc;
u8 ctrl_allmulti; u8 ctrl_allmulti;
/* Ethtool settings */
u8 duplex;
u32 speed;
}; };
struct padded_vnet_hdr { struct padded_vnet_hdr {
...@@ -1376,6 +1380,58 @@ static void virtnet_get_channels(struct net_device *dev, ...@@ -1376,6 +1380,58 @@ static void virtnet_get_channels(struct net_device *dev,
channels->other_count = 0; channels->other_count = 0;
} }
/* Check if the user is trying to change anything besides speed/duplex */
static bool virtnet_validate_ethtool_cmd(const struct ethtool_cmd *cmd)
{
struct ethtool_cmd diff1 = *cmd;
struct ethtool_cmd diff2 = {};
/* advertising and cmd are usually set, ignore port because we set it */
ethtool_cmd_speed_set(&diff1, 0);
diff1.advertising = 0;
diff1.duplex = 0;
diff1.port = 0;
diff1.cmd = 0;
return !memcmp(&diff1, &diff2, sizeof(diff1));
}
static int virtnet_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct virtnet_info *vi = netdev_priv(dev);
u32 speed;
speed = ethtool_cmd_speed(cmd);
/* don't allow custom speed and duplex */
if (!ethtool_validate_speed(speed) ||
!ethtool_validate_duplex(cmd->duplex) ||
!virtnet_validate_ethtool_cmd(cmd))
return -EINVAL;
vi->speed = speed;
vi->duplex = cmd->duplex;
return 0;
}
static int virtnet_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct virtnet_info *vi = netdev_priv(dev);
ethtool_cmd_speed_set(cmd, vi->speed);
cmd->duplex = vi->duplex;
cmd->port = PORT_OTHER;
return 0;
}
static void virtnet_init_settings(struct net_device *dev)
{
struct virtnet_info *vi = netdev_priv(dev);
vi->speed = SPEED_UNKNOWN;
vi->duplex = DUPLEX_UNKNOWN;
}
static const struct ethtool_ops virtnet_ethtool_ops = { static const struct ethtool_ops virtnet_ethtool_ops = {
.get_drvinfo = virtnet_get_drvinfo, .get_drvinfo = virtnet_get_drvinfo,
.get_link = ethtool_op_get_link, .get_link = ethtool_op_get_link,
...@@ -1383,6 +1439,8 @@ static const struct ethtool_ops virtnet_ethtool_ops = { ...@@ -1383,6 +1439,8 @@ static const struct ethtool_ops virtnet_ethtool_ops = {
.set_channels = virtnet_set_channels, .set_channels = virtnet_set_channels,
.get_channels = virtnet_get_channels, .get_channels = virtnet_get_channels,
.get_ts_info = ethtool_op_get_ts_info, .get_ts_info = ethtool_op_get_ts_info,
.get_settings = virtnet_get_settings,
.set_settings = virtnet_set_settings,
}; };
#define MIN_MTU 68 #define MIN_MTU 68
...@@ -1855,6 +1913,8 @@ static int virtnet_probe(struct virtio_device *vdev) ...@@ -1855,6 +1913,8 @@ static int virtnet_probe(struct virtio_device *vdev)
netif_set_real_num_tx_queues(dev, vi->curr_queue_pairs); netif_set_real_num_tx_queues(dev, vi->curr_queue_pairs);
netif_set_real_num_rx_queues(dev, vi->curr_queue_pairs); netif_set_real_num_rx_queues(dev, vi->curr_queue_pairs);
virtnet_init_settings(dev);
err = register_netdev(dev); err = register_netdev(dev);
if (err) { if (err) {
pr_debug("virtio_net: registering device failed\n"); pr_debug("virtio_net: registering device failed\n");
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment