media: uvcvideo: Recover stalled ElGato devices

Elgato Cam Link 4k can be in a stalled state if the resolution of
the external source has changed while the firmware initializes.
Once in this state, the device is useless until it receives a
USB reset. It has even been observed that the stalled state will
continue even after unplugging the device.

lsusb -v

Bus 002 Device 002: ID 0fd9:0066 Elgato Systems GmbH Cam Link 4K
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.00
  bDeviceClass          239 Miscellaneous Device
  bDeviceSubClass         2
  bDeviceProtocol         1 Interface Association
  bMaxPacketSize0         9
  idVendor           0x0fd9 Elgato Systems GmbH
  idProduct          0x0066
  bcdDevice            0.00
  iManufacturer           1 Elgato
  iProduct                2 Cam Link 4K
  iSerial                 4 0005AC52FE000
  bNumConfigurations      1
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drivers/media/usb/uvc/uvc_video.c

@@ -129,12 +129,13 @@ int uvc_query_ctrl(struct uvc_device *dev, u8 query, u8 unit,
 	return -EPIPE;
 }
 
+static const struct usb_device_id elgato_cam_link_4k = {
+	USB_DEVICE(0x0fd9, 0x0066)
+};
+
 static void uvc_fixup_video_ctrl(struct uvc_streaming *stream,
 	struct uvc_streaming_control *ctrl)
 {
-	static const struct usb_device_id elgato_cam_link_4k = {
-		USB_DEVICE(0x0fd9, 0x0066)
-	};
 	struct uvc_format *format = NULL;
 	struct uvc_frame *frame = NULL;
 	unsigned int i;
@@ -297,7 +298,7 @@ static int uvc_get_video_ctrl(struct uvc_streaming *stream,
 		dev_err(&stream->intf->dev,
 			"Failed to query (%u) UVC %s control : %d (exp. %u).\n",
 			query, probe ? "probe" : "commit", ret, size);
-		ret = -EIO;
+		ret = (ret == -EPROTO) ? -EPROTO : -EIO;
 		goto out;
 	}
 
@@ -2121,6 +2122,21 @@ int uvc_video_init(struct uvc_streaming *stream)
 	 * request on the probe control, as required by the UVC specification.
 	 */
 	ret = uvc_get_video_ctrl(stream, probe, 1, UVC_GET_CUR);
+
+	/*
+	 * Elgato Cam Link 4k can be in a stalled state if the resolution of
+	 * the external source has changed while the firmware initializes.
+	 * Once in this state, the device is useless until it receives a
+	 * USB reset. It has even been observed that the stalled state will
+	 * continue even after unplugging the device.
+	 */
+	if (ret == -EPROTO &&
+	    usb_match_one_id(stream->dev->intf, &elgato_cam_link_4k)) {
+		dev_err(&stream->intf->dev, "Elgato Cam Link 4K firmware crash detected\n");
+		dev_err(&stream->intf->dev, "Resetting the device, unplug and replug to recover\n");
+		usb_reset_device(stream->dev->udev);
+	}
+
 	if (ret < 0)
 		return ret;