Skip to content

L
linux
Commit 164f5900 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'microblaze-v6.2' of git://git.monstr.eu/linux-2.6-microblaze 

Pull microblaze updates from Michal Simek:
 "Clean up PCI support which was pretty much copied and pasted from
  PowerPC long time ago for one custom platform which is not available
  for years.

  Also, the Xilinx/AMD PCIe team tested Microblaze with IP cores also
  used on ARM SOCs and clean up Microblaze code"

* tag 'microblaze-v6.2' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze/PCI: Moving PCI iounmap and dependent code
  microblaze/PCI: Remove support for Xilinx PCI host bridge
  microblaze/PCI: Remove unused pci_iobar_pfn() and et al declarations
  microblaze/PCI: Remove unused sys_pciconfig_iobase() and et al declaration
  microblaze/PCI: Remove unused pci_address_to_pio() conversion of CPU address to I/O port
  microblaze/PCI: Remove unused PCI Indirect ops
  microblaze/PCI: Remove unused PCI BIOS resource allocation
  microblaze/PCI: Remove unused allocation & free of PCI host bridge structure
  microblaze/PCI: Remove unused device tree parsing for a host bridge resources
  microblaze/PCI: Remove unused PCI legacy IO's access on a bus
  microblaze/PCI: Remove unused PCI bus scan if configured as a host
  microblaze/PCI: Remove Null PCI config access unused functions
  microblaze/PCI: Remove unused early_read_config_byte() et al declarations
parents 7d621599 5cfe469c
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 37 additions and 1527 deletions
arch/microblaze/Kconfig
View file @ 164f5900
......@@ -215,11 +215,3 @@ config MB_MANAGER
Say N here unless you know what you are doing.
endmenu
menu "Bus Options"
config PCI_XILINX
bool "Xilinx PCI host bridge support"
depends on PCI
endmenu
arch/microblaze/configs/mmu_defconfig
View file @ 164f5900
......@@ -19,7 +19,6 @@ CONFIG_HZ_100=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE_FORCE=y
CONFIG_HIGHMEM=y
CONFIG_PCI_XILINX=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
......
arch/microblaze/include/asm/pci-bridge.h
View file @ 164f5900
......@@ -25,75 +25,17 @@ static inline int pcibios_vaddr_is_ioport(void __iomem *address)
*/
struct pci_controller {
struct pci_bus *bus;
char is_dynamic;
struct device_node *dn;
struct list_head list_node;
struct device *parent;
int first_busno;
int last_busno;
int self_busno;
void __iomem *io_base_virt;
resource_size_t io_base_phys;
resource_size_t pci_io_size;
/* Some machines (PReP) have a non 1:1 mapping of
* the PCI memory space in the CPU bus space
*/
resource_size_t pci_mem_offset;
/* Some machines have a special region to forward the ISA
* "memory" cycles such as VGA memory regions. Left to 0
* if unsupported
*/
resource_size_t isa_mem_phys;
resource_size_t isa_mem_size;
struct pci_ops *ops;
unsigned int __iomem *cfg_addr;
void __iomem *cfg_data;
/*
* Used for variants of PCI indirect handling and possible quirks:
* SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1
* EXT_REG - provides access to PCI-e extended registers
* SURPRESS_PRIMARY_BUS - we suppress the setting of PCI_PRIMARY_BUS
* on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS
* to determine which bus number to match on when generating type0
* config cycles
* NO_PCIE_LINK - the Freescale PCI-e controllers have issues with
* hanging if we don't have link and try to do config cycles to
* anything but the PHB. Only allow talking to the PHB if this is
* set.
* BIG_ENDIAN - cfg_addr is a big endian register
* BROKEN_MRM - the 440EPx/GRx chips have an errata that causes hangs
* on the PLB4. Effectively disable MRM commands by setting this.
*/
#define INDIRECT_TYPE_SET_CFG_TYPE 0x00000001
#define INDIRECT_TYPE_EXT_REG 0x00000002
#define INDIRECT_TYPE_SURPRESS_PRIMARY_BUS 0x00000004
#define INDIRECT_TYPE_NO_PCIE_LINK 0x00000008
#define INDIRECT_TYPE_BIG_ENDIAN 0x00000010
#define INDIRECT_TYPE_BROKEN_MRM 0x00000020
u32 indirect_type;
/* Currently, we limit ourselves to 1 IO range and 3 mem
* ranges since the common pci_bus structure can't handle more
*/
struct resource io_resource;
struct resource mem_resources[3];
int global_number; /* PCI domain number */
};
#ifdef CONFIG_PCI
static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
{
return bus->sysdata;
}
static inline int isa_vaddr_is_ioport(void __iomem *address)
{
/* No specific ISA handling on ppc32 at this stage, it
......@@ -103,39 +45,5 @@ static inline int isa_vaddr_is_ioport(void __iomem *address)
}
#endif /* CONFIG_PCI */
/* These are used for config access before all the PCI probing
has been done. */
extern int early_read_config_byte(struct pci_controller *hose, int bus,
int dev_fn, int where, u8 *val);
extern int early_read_config_word(struct pci_controller *hose, int bus,
int dev_fn, int where, u16 *val);
extern int early_read_config_dword(struct pci_controller *hose, int bus,
int dev_fn, int where, u32 *val);
extern int early_write_config_byte(struct pci_controller *hose, int bus,
int dev_fn, int where, u8 val);
extern int early_write_config_word(struct pci_controller *hose, int bus,
int dev_fn, int where, u16 val);
extern int early_write_config_dword(struct pci_controller *hose, int bus,
int dev_fn, int where, u32 val);
extern int early_find_capability(struct pci_controller *hose, int bus,
int dev_fn, int cap);
extern void setup_indirect_pci(struct pci_controller *hose,
resource_size_t cfg_addr,
resource_size_t cfg_data, u32 flags);
/* Get the PCI host controller for an OF device */
extern struct pci_controller *pci_find_hose_for_OF_device(
struct device_node *node);
/* Fill up host controller resources from the OF node */
extern void pci_process_bridge_OF_ranges(struct pci_controller *hose,
struct device_node *dev, int primary);
/* Allocate & free a PCI host bridge structure */
extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
extern void pcibios_free_controller(struct pci_controller *phb);
#endif /* __KERNEL__ */
#endif /* _ASM_MICROBLAZE_PCI_BRIDGE_H */
arch/microblaze/include/asm/pci.h
View file @ 164f5900
......@@ -21,15 +21,6 @@
#define PCIBIOS_MIN_IO 0x1000
#define PCIBIOS_MIN_MEM 0x10000000
/* Values for the `which' argument to sys_pciconfig_iobase syscall. */
#define IOBASE_BRIDGE_NUMBER 0
#define IOBASE_MEMORY 1
#define IOBASE_IO 2
#define IOBASE_ISA_IO 3
#define IOBASE_ISA_MEM 4
#define pcibios_scan_all_fns(a, b) 0
/*
* Set this to 1 if you want the kernel to re-assign all PCI
* bus numbers (don't do that on ppc64 yet !)
......@@ -41,33 +32,13 @@ extern int pci_domain_nr(struct pci_bus *bus);
/* Decide whether to display the domain number in /proc */
extern int pci_proc_domain(struct pci_bus *bus);
struct vm_area_struct;
/* Tell PCI code what kind of PCI resource mappings we support */
#define HAVE_PCI_MMAP 1
#define ARCH_GENERIC_PCI_MMAP_RESOURCE 1
#define arch_can_pci_mmap_io() 1
extern int pci_legacy_read(struct pci_bus *bus, loff_t port, u32 *val,
size_t count);
extern int pci_legacy_write(struct pci_bus *bus, loff_t port, u32 val,
size_t count);
extern int pci_mmap_legacy_page_range(struct pci_bus *bus,
struct vm_area_struct *vma,
enum pci_mmap_state mmap_state);
#define HAVE_PCI_LEGACY 1
extern void pcibios_resource_survey(void);
struct file;
/* This part of code was originally in xilinx-pci.h */
#ifdef CONFIG_PCI_XILINX
extern void __init xilinx_pci_init(void);
#else
static inline void __init xilinx_pci_init(void) { return; }
#endif
#endif /* __KERNEL__ */
#endif /* __ASM_MICROBLAZE_PCI_H */
arch/microblaze/pci/Makefile
View file @ 164f5900
......@@ -3,5 +3,4 @@
# Makefile
#
obj-$(CONFIG_PCI) += pci-common.o indirect_pci.o iomap.o
obj-$(CONFIG_PCI_XILINX) += xilinx_pci.o
obj-$(CONFIG_PCI) += iomap.o
arch/microblaze/pci/indirect_pci.c deleted 100644 → 0
View file @ 7d621599
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Support for indirect PCI bridges.
*
* Copyright (C) 1998 Gabriel Paubert.
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/io.h>
#include <asm/pci-bridge.h>
static int
indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
int len, u32 *val)
{
struct pci_controller *hose = pci_bus_to_host(bus);
volatile void __iomem *cfg_data;
u8 cfg_type = 0;
u32 bus_no, reg;
if (hose->indirect_type & INDIRECT_TYPE_NO_PCIE_LINK) {
if (bus->number != hose->first_busno)
return PCIBIOS_DEVICE_NOT_FOUND;
if (devfn != 0)
return PCIBIOS_DEVICE_NOT_FOUND;
}
if (hose->indirect_type & INDIRECT_TYPE_SET_CFG_TYPE)
if (bus->number != hose->first_busno)
cfg_type = 1;
bus_no = (bus->number == hose->first_busno) ?
hose->self_busno : bus->number;
if (hose->indirect_type & INDIRECT_TYPE_EXT_REG)
reg = ((offset & 0xf00) << 16) | (offset & 0xfc);
else
reg = offset & 0xfc; /* Only 3 bits for function */
if (hose->indirect_type & INDIRECT_TYPE_BIG_ENDIAN)
out_be32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
(devfn << 8) | reg | cfg_type));
else
out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
(devfn << 8) | reg | cfg_type));
/*
* Note: the caller has already checked that offset is
* suitably aligned and that len is 1, 2 or 4.
*/
cfg_data = hose->cfg_data + (offset & 3); /* Only 3 bits for function */
switch (len) {
case 1:
*val = in_8(cfg_data);
break;
case 2:
*val = in_le16(cfg_data);
break;
default:
*val = in_le32(cfg_data);
break;
}
return PCIBIOS_SUCCESSFUL;
}
static int
indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
int len, u32 val)
{
struct pci_controller *hose = pci_bus_to_host(bus);
volatile void __iomem *cfg_data;
u8 cfg_type = 0;
u32 bus_no, reg;
if (hose->indirect_type & INDIRECT_TYPE_NO_PCIE_LINK) {
if (bus->number != hose->first_busno)
return PCIBIOS_DEVICE_NOT_FOUND;
if (devfn != 0)
return PCIBIOS_DEVICE_NOT_FOUND;
}
if (hose->indirect_type & INDIRECT_TYPE_SET_CFG_TYPE)
if (bus->number != hose->first_busno)
cfg_type = 1;
bus_no = (bus->number == hose->first_busno) ?
hose->self_busno : bus->number;
if (hose->indirect_type & INDIRECT_TYPE_EXT_REG)
reg = ((offset & 0xf00) << 16) | (offset & 0xfc);
else
reg = offset & 0xfc;
if (hose->indirect_type & INDIRECT_TYPE_BIG_ENDIAN)
out_be32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
(devfn << 8) | reg | cfg_type));
else
out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
(devfn << 8) | reg | cfg_type));
/* suppress setting of PCI_PRIMARY_BUS */
if (hose->indirect_type & INDIRECT_TYPE_SURPRESS_PRIMARY_BUS)
if ((offset == PCI_PRIMARY_BUS) &&
(bus->number == hose->first_busno))
val &= 0xffffff00;
/* Workaround for PCI_28 Errata in 440EPx/GRx */
if ((hose->indirect_type & INDIRECT_TYPE_BROKEN_MRM) &&
offset == PCI_CACHE_LINE_SIZE) {
val = 0;
}
/*
* Note: the caller has already checked that offset is
* suitably aligned and that len is 1, 2 or 4.
*/
cfg_data = hose->cfg_data + (offset & 3);
switch (len) {
case 1:
out_8(cfg_data, val);
break;
case 2:
out_le16(cfg_data, val);
break;
default:
out_le32(cfg_data, val);
break;
}
return PCIBIOS_SUCCESSFUL;
}
static struct pci_ops indirect_pci_ops = {
.read = indirect_read_config,
.write = indirect_write_config,
};
void __init
setup_indirect_pci(struct pci_controller *hose,
resource_size_t cfg_addr,
resource_size_t cfg_data, u32 flags)
{
resource_size_t base = cfg_addr & PAGE_MASK;
void __iomem *mbase;
mbase = ioremap(base, PAGE_SIZE);
hose->cfg_addr = mbase + (cfg_addr & ~PAGE_MASK);
if ((cfg_data & PAGE_MASK) != base)
mbase = ioremap(cfg_data & PAGE_MASK, PAGE_SIZE);
hose->cfg_data = mbase + (cfg_data & ~PAGE_MASK);
hose->ops = &indirect_pci_ops;
hose->indirect_type = flags;
}
arch/microblaze/pci/iomap.c
View file @ 164f5900
......@@ -11,6 +11,42 @@
#include <linux/io.h>
#include <asm/pci-bridge.h>
static DEFINE_SPINLOCK(hose_spinlock);
LIST_HEAD(hose_list);
unsigned long isa_io_base;
EXPORT_SYMBOL(isa_io_base);
static resource_size_t pcibios_io_size(const struct pci_controller *hose)
{
return resource_size(&hose->io_resource);
}
int pcibios_vaddr_is_ioport(void __iomem *address)
{
int ret = 0;
struct pci_controller *hose;
resource_size_t size;
spin_lock(&hose_spinlock);
list_for_each_entry(hose, &hose_list, list_node) {
size = pcibios_io_size(hose);
if (address >= hose->io_base_virt &&
address < (hose->io_base_virt + size)) {
ret = 1;
break;
}
}
spin_unlock(&hose_spinlock);
return ret;
}
/* Display the domain number in /proc */
int pci_proc_domain(struct pci_bus *bus)
{
return pci_domain_nr(bus);
}
void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
{
if (isa_vaddr_is_ioport(addr))
......
arch/microblaze/pci/pci-common.c deleted 100644 → 0
View file @ 7d621599
This diff is collapsed.
arch/microblaze/pci/xilinx_pci.c deleted 100644 → 0
View file @ 7d621599
/*
* PCI support for Xilinx plbv46_pci soft-core which can be used on
* Xilinx Virtex ML410 / ML510 boards.
*
* Copyright 2009 Roderick Colenbrander
* Copyright 2009 Secret Lab Technologies Ltd.
*
* The pci bridge fixup code was copied from ppc4xx_pci.c and was written
* by Benjamin Herrenschmidt.
* Copyright 2007 Ben. Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#include <linux/ioport.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/pci.h>
#include <linux/io.h>
#define XPLB_PCI_ADDR 0x10c
#define XPLB_PCI_DATA 0x110
#define XPLB_PCI_BUS 0x114
#define PCI_HOST_ENABLE_CMD (PCI_COMMAND_SERR | PCI_COMMAND_PARITY | \
PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY)
static const struct of_device_id xilinx_pci_match[] = {
{ .compatible = "xlnx,plbv46-pci-1.03.a", },
{}
};
/**
* xilinx_pci_fixup_bridge - Block Xilinx PHB configuration.
*/
static void xilinx_pci_fixup_bridge(struct pci_dev *dev)
{
struct pci_controller *hose;
int i;
if (dev->devfn || dev->bus->self)
return;
hose = pci_bus_to_host(dev->bus);
if (!hose)
return;
if (!of_match_node(xilinx_pci_match, hose->dn))
return;
/* Hide the PCI host BARs from the kernel as their content doesn't
* fit well in the resource management
*/
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
dev->resource[i].start = 0;
dev->resource[i].end = 0;
dev->resource[i].flags = 0;
}
dev_info(&dev->dev, "Hiding Xilinx plb-pci host bridge resources %s\n",
pci_name(dev));
}
DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, xilinx_pci_fixup_bridge);
#ifdef DEBUG
/**
* xilinx_pci_exclude_device - Don't do config access for non-root bus
*
* This is a hack. Config access to any bus other than bus 0 does not
* currently work on the ML510 so we prevent it here.
*/
static int
xilinx_pci_exclude_device(struct pci_controller *hose, u_char bus, u8 devfn)
{
return (bus != 0);
}
/**
* xilinx_early_pci_scan - List pci config space for available devices
*
* List pci devices in very early phase.
*/
static void __init xilinx_early_pci_scan(struct pci_controller *hose)
{
u32 bus = 0;
u32 val, dev, func, offset;
/* Currently we have only 2 device connected - up-to 32 devices */
for (dev = 0; dev < 2; dev++) {
/* List only first function number - up-to 8 functions */
for (func = 0; func < 1; func++) {
pr_info("%02x:%02x:%02x", bus, dev, func);
/* read the first 64 standardized bytes */
/* Up-to 192 bytes can be list of capabilities */
for (offset = 0; offset < 64; offset += 4) {
early_read_config_dword(hose, bus,
PCI_DEVFN(dev, func), offset, &val);
if (offset == 0 && val == 0xFFFFFFFF) {
pr_cont("\nABSENT");
break;
}
if (!(offset % 0x10))
pr_cont("\n%04x: ", offset);
pr_cont("%08x ", val);
}
pr_info("\n");
}
}
}
#else
static void __init xilinx_early_pci_scan(struct pci_controller *hose)
{
}
#endif
/**
* xilinx_pci_init - Find and register a Xilinx PCI host bridge
*/
void __init xilinx_pci_init(void)
{
struct pci_controller *hose;
struct resource r;
void __iomem *pci_reg;
struct device_node *pci_node;
pci_node = of_find_matching_node(NULL, xilinx_pci_match);
if (!pci_node)
return;
if (of_address_to_resource(pci_node, 0, &r)) {
pr_err("xilinx-pci: cannot resolve base address\n");
return;
}
hose = pcibios_alloc_controller(pci_node);
if (!hose) {
pr_err("xilinx-pci: pcibios_alloc_controller() failed\n");
return;
}
/* Setup config space */
setup_indirect_pci(hose, r.start + XPLB_PCI_ADDR,
r.start + XPLB_PCI_DATA,
INDIRECT_TYPE_SET_CFG_TYPE);
/* According to the xilinx plbv46_pci documentation the soft-core starts
* a self-init when the bus master enable bit is set. Without this bit
* set the pci bus can't be scanned.
*/
early_write_config_word(hose, 0, 0, PCI_COMMAND, PCI_HOST_ENABLE_CMD);
/* Set the max latency timer to 255 */
early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0xff);
/* Set the max bus number to 255, and bus/subbus no's to 0 */
pci_reg = of_iomap(pci_node, 0);
WARN_ON(!pci_reg);
out_be32(pci_reg + XPLB_PCI_BUS, 0x000000ff);
iounmap(pci_reg);
/* Register the host bridge with the linux kernel! */
pci_process_bridge_OF_ranges(hose, pci_node,
INDIRECT_TYPE_SET_CFG_TYPE);
pr_info("xilinx-pci: Registered PCI host bridge\n");
xilinx_early_pci_scan(hose);
}
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7