Commit 166a0fd4 authored by stephen hemminger's avatar stephen hemminger Committed by David S. Miller

sky2: leave PCI config space writeable

Since power management is done by PCI subsystem as well as driver,
don't toggle the bit that disables PCI register writes.
Signed-off-by: default avatarStephen Hemminger <shemminger@vyatta.com>
Acked-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent dae3a511
...@@ -644,7 +644,6 @@ static void sky2_phy_power_up(struct sky2_hw *hw, unsigned port) ...@@ -644,7 +644,6 @@ static void sky2_phy_power_up(struct sky2_hw *hw, unsigned port)
{ {
u32 reg1; u32 reg1;
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
reg1 = sky2_pci_read32(hw, PCI_DEV_REG1); reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
reg1 &= ~phy_power[port]; reg1 &= ~phy_power[port];
...@@ -652,7 +651,6 @@ static void sky2_phy_power_up(struct sky2_hw *hw, unsigned port) ...@@ -652,7 +651,6 @@ static void sky2_phy_power_up(struct sky2_hw *hw, unsigned port)
reg1 |= coma_mode[port]; reg1 |= coma_mode[port];
sky2_pci_write32(hw, PCI_DEV_REG1, reg1); sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
sky2_pci_read32(hw, PCI_DEV_REG1); sky2_pci_read32(hw, PCI_DEV_REG1);
if (hw->chip_id == CHIP_ID_YUKON_FE) if (hw->chip_id == CHIP_ID_YUKON_FE)
...@@ -709,11 +707,9 @@ static void sky2_phy_power_down(struct sky2_hw *hw, unsigned port) ...@@ -709,11 +707,9 @@ static void sky2_phy_power_down(struct sky2_hw *hw, unsigned port)
gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_PDOWN); gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_PDOWN);
} }
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
reg1 = sky2_pci_read32(hw, PCI_DEV_REG1); reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
reg1 |= phy_power[port]; /* set PHY to PowerDown/COMA Mode */ reg1 |= phy_power[port]; /* set PHY to PowerDown/COMA Mode */
sky2_pci_write32(hw, PCI_DEV_REG1, reg1); sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
} }
/* Force a renegotiation */ /* Force a renegotiation */
...@@ -2152,9 +2148,7 @@ static void sky2_qlink_intr(struct sky2_hw *hw) ...@@ -2152,9 +2148,7 @@ static void sky2_qlink_intr(struct sky2_hw *hw)
/* reset PHY Link Detect */ /* reset PHY Link Detect */
phy = sky2_pci_read16(hw, PSM_CONFIG_REG4); phy = sky2_pci_read16(hw, PSM_CONFIG_REG4);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
sky2_pci_write16(hw, PSM_CONFIG_REG4, phy | 1); sky2_pci_write16(hw, PSM_CONFIG_REG4, phy | 1);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
sky2_link_up(sky2); sky2_link_up(sky2);
} }
...@@ -2645,7 +2639,6 @@ static void sky2_hw_intr(struct sky2_hw *hw) ...@@ -2645,7 +2639,6 @@ static void sky2_hw_intr(struct sky2_hw *hw)
if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) { if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
u16 pci_err; u16 pci_err;
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
pci_err = sky2_pci_read16(hw, PCI_STATUS); pci_err = sky2_pci_read16(hw, PCI_STATUS);
if (net_ratelimit()) if (net_ratelimit())
dev_err(&pdev->dev, "PCI hardware error (0x%x)\n", dev_err(&pdev->dev, "PCI hardware error (0x%x)\n",
...@@ -2653,14 +2646,12 @@ static void sky2_hw_intr(struct sky2_hw *hw) ...@@ -2653,14 +2646,12 @@ static void sky2_hw_intr(struct sky2_hw *hw)
sky2_pci_write16(hw, PCI_STATUS, sky2_pci_write16(hw, PCI_STATUS,
pci_err | PCI_STATUS_ERROR_BITS); pci_err | PCI_STATUS_ERROR_BITS);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
} }
if (status & Y2_IS_PCI_EXP) { if (status & Y2_IS_PCI_EXP) {
/* PCI-Express uncorrectable Error occurred */ /* PCI-Express uncorrectable Error occurred */
u32 err; u32 err;
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS); err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS, sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
0xfffffffful); 0xfffffffful);
...@@ -2668,7 +2659,6 @@ static void sky2_hw_intr(struct sky2_hw *hw) ...@@ -2668,7 +2659,6 @@ static void sky2_hw_intr(struct sky2_hw *hw)
dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err); dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err);
sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS); sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
} }
if (status & Y2_HWE_L1_MASK) if (status & Y2_HWE_L1_MASK)
...@@ -3047,7 +3037,6 @@ static void sky2_reset(struct sky2_hw *hw) ...@@ -3047,7 +3037,6 @@ static void sky2_reset(struct sky2_hw *hw)
} }
sky2_power_on(hw); sky2_power_on(hw);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
for (i = 0; i < hw->ports; i++) { for (i = 0; i < hw->ports; i++) {
sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET); sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
...@@ -3084,7 +3073,6 @@ static void sky2_reset(struct sky2_hw *hw) ...@@ -3084,7 +3073,6 @@ static void sky2_reset(struct sky2_hw *hw)
reg <<= PSM_CONFIG_REG4_TIMER_PHY_LINK_DETECT_BASE; reg <<= PSM_CONFIG_REG4_TIMER_PHY_LINK_DETECT_BASE;
/* reset PHY Link Detect */ /* reset PHY Link Detect */
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
sky2_pci_write16(hw, PSM_CONFIG_REG4, sky2_pci_write16(hw, PSM_CONFIG_REG4,
reg | PSM_CONFIG_REG4_RST_PHY_LINK_DETECT); reg | PSM_CONFIG_REG4_RST_PHY_LINK_DETECT);
sky2_pci_write16(hw, PSM_CONFIG_REG4, reg); sky2_pci_write16(hw, PSM_CONFIG_REG4, reg);
...@@ -3102,7 +3090,6 @@ static void sky2_reset(struct sky2_hw *hw) ...@@ -3102,7 +3090,6 @@ static void sky2_reset(struct sky2_hw *hw)
/* restore the PCIe Link Control register */ /* restore the PCIe Link Control register */
sky2_pci_write16(hw, cap + PCI_EXP_LNKCTL, reg); sky2_pci_write16(hw, cap + PCI_EXP_LNKCTL, reg);
} }
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
/* re-enable PEX PM in PEX PHY debug reg. 8 (clear bit 12) */ /* re-enable PEX PM in PEX PHY debug reg. 8 (clear bit 12) */
sky2_write32(hw, Y2_PEX_PHY_DATA, PEX_DB_ACCESS | (0x08UL << 16)); sky2_write32(hw, Y2_PEX_PHY_DATA, PEX_DB_ACCESS | (0x08UL << 16));
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment