Commit 166e9278 authored by Ohad Ben-Cohen's avatar Ohad Ben-Cohen Committed by Joerg Roedel

x86/ia64: intel-iommu: move to drivers/iommu/

This should ease finding similarities with different platforms,
with the intention of solving problems once in a generic framework
which everyone can use.

Note: to move intel-iommu.c, the declaration of pci_find_upstream_pcie_bridge()
has to move from drivers/pci/pci.h to include/linux/pci.h. This is handled
in this patch, too.

As suggested, also drop DMAR's EXPERIMENTAL tag while we're at it.

Compile-tested on x86_64.
Signed-off-by: default avatarOhad Ben-Cohen <ohad@wizery.com>
Signed-off-by: default avatarJoerg Roedel <joerg.roedel@amd.com>
parent 29b68415
......@@ -627,27 +627,6 @@ source "drivers/pci/hotplug/Kconfig"
source "drivers/pcmcia/Kconfig"
config DMAR
bool "Support for DMA Remapping Devices (EXPERIMENTAL)"
depends on IA64_GENERIC && ACPI && EXPERIMENTAL
help
DMA remapping (DMAR) devices support enables independent address
translations for Direct Memory Access (DMA) from devices.
These DMA remapping devices are reported via ACPI tables
and include PCI device scope covered by these DMA
remapping devices.
config DMAR_DEFAULT_ON
def_bool y
prompt "Enable DMA Remapping Devices by default"
depends on DMAR
help
Selecting this option will enable a DMAR device at boot time if
one is found. If this option is not selected, DMAR support can
be enabled by passing intel_iommu=on to the kernel. It is
recommended you say N here while the DMAR code remains
experimental.
endmenu
endif
......
......@@ -1912,56 +1912,6 @@ config PCI_CNB20LE_QUIRK
You should say N unless you know you need this.
config DMAR
bool "Support for DMA Remapping Devices (EXPERIMENTAL)"
depends on PCI_MSI && ACPI && EXPERIMENTAL
select IOMMU_API
help
DMA remapping (DMAR) devices support enables independent address
translations for Direct Memory Access (DMA) from devices.
These DMA remapping devices are reported via ACPI tables
and include PCI device scope covered by these DMA
remapping devices.
config DMAR_DEFAULT_ON
def_bool y
prompt "Enable DMA Remapping Devices by default"
depends on DMAR
help
Selecting this option will enable a DMAR device at boot time if
one is found. If this option is not selected, DMAR support can
be enabled by passing intel_iommu=on to the kernel. It is
recommended you say N here while the DMAR code remains
experimental.
config DMAR_BROKEN_GFX_WA
bool "Workaround broken graphics drivers (going away soon)"
depends on DMAR && BROKEN
---help---
Current Graphics drivers tend to use physical address
for DMA and avoid using DMA APIs. Setting this config
option permits the IOMMU driver to set a unity map for
all the OS-visible memory. Hence the driver can continue
to use physical addresses for DMA, at least until this
option is removed in the 2.6.32 kernel.
config DMAR_FLOPPY_WA
def_bool y
depends on DMAR
---help---
Floppy disk drivers are known to bypass DMA API calls
thereby failing to work when IOMMU is enabled. This
workaround will setup a 1:1 mapping for the first
16MiB to make floppy (an ISA device) work.
config INTR_REMAP
bool "Support for Interrupt Remapping (EXPERIMENTAL)"
depends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI && EXPERIMENTAL
---help---
Supports Interrupt remapping for IO-APIC and MSI devices.
To use x2apic mode in the CPU's which support x2APIC enhancements or
to support platforms with CPU's having > 8 bit APIC ID, say Y.
source "drivers/pci/pcie/Kconfig"
source "drivers/pci/Kconfig"
......
......@@ -46,3 +46,52 @@ config AMD_IOMMU_STATS
statistics about whats happening in the driver and exports that
information to userspace via debugfs.
If unsure, say N.
# Intel IOMMU support
config DMAR
bool "Support for DMA Remapping Devices"
depends on PCI_MSI && ACPI && (X86 || IA64_GENERIC)
select IOMMU_API
help
DMA remapping (DMAR) devices support enables independent address
translations for Direct Memory Access (DMA) from devices.
These DMA remapping devices are reported via ACPI tables
and include PCI device scope covered by these DMA
remapping devices.
config DMAR_DEFAULT_ON
def_bool y
prompt "Enable DMA Remapping Devices by default"
depends on DMAR
help
Selecting this option will enable a DMAR device at boot time if
one is found. If this option is not selected, DMAR support can
be enabled by passing intel_iommu=on to the kernel.
config DMAR_BROKEN_GFX_WA
bool "Workaround broken graphics drivers (going away soon)"
depends on DMAR && BROKEN && X86
---help---
Current Graphics drivers tend to use physical address
for DMA and avoid using DMA APIs. Setting this config
option permits the IOMMU driver to set a unity map for
all the OS-visible memory. Hence the driver can continue
to use physical addresses for DMA, at least until this
option is removed in the 2.6.32 kernel.
config DMAR_FLOPPY_WA
def_bool y
depends on DMAR && X86
---help---
Floppy disk drivers are known to bypass DMA API calls
thereby failing to work when IOMMU is enabled. This
workaround will setup a 1:1 mapping for the first
16MiB to make floppy (an ISA device) work.
config INTR_REMAP
bool "Support for Interrupt Remapping (EXPERIMENTAL)"
depends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI && EXPERIMENTAL
---help---
Supports Interrupt remapping for IO-APIC and MSI devices.
To use x2apic mode in the CPU's which support x2APIC enhancements or
to support platforms with CPU's having > 8 bit APIC ID, say Y.
obj-$(CONFIG_IOMMU_API) += iommu.o
obj-$(CONFIG_MSM_IOMMU) += msm_iommu.o msm_iommu_dev.o
obj-$(CONFIG_AMD_IOMMU) += amd_iommu.o
obj-$(CONFIG_DMAR) += dmar.o iova.o intel-iommu.o
obj-$(CONFIG_INTR_REMAP) += dmar.o intr_remapping.o
......@@ -42,7 +42,6 @@
#include <linux/pci-ats.h>
#include <asm/cacheflush.h>
#include <asm/iommu.h>
#include "pci.h"
#define ROOT_SIZE VTD_PAGE_SIZE
#define CONTEXT_SIZE VTD_PAGE_SIZE
......
......@@ -13,7 +13,6 @@
#include "intr_remapping.h"
#include <acpi/acpi.h>
#include <asm/pci-direct.h>
#include "pci.h"
static struct ioapic_scope ir_ioapic[MAX_IO_APICS];
static struct hpet_scope ir_hpet[MAX_HPET_TBS];
......
......@@ -29,11 +29,6 @@ obj-$(CONFIG_PCI_MSI) += msi.o
# Build the Hypertransport interrupt support
obj-$(CONFIG_HT_IRQ) += htirq.o
# Build Intel IOMMU support
obj-$(CONFIG_DMAR) += dmar.o iova.o intel-iommu.o
obj-$(CONFIG_INTR_REMAP) += dmar.o intr_remapping.o
obj-$(CONFIG_PCI_IOV) += iov.o
#
......
......@@ -184,8 +184,6 @@ pci_match_one_device(const struct pci_device_id *id, const struct pci_dev *dev)
return NULL;
}
struct pci_dev *pci_find_upstream_pcie_bridge(struct pci_dev *pdev);
/* PCI slot sysfs helper code */
#define to_pci_slot(s) container_of(s, struct pci_slot, kobj)
......
......@@ -1589,5 +1589,16 @@ int pci_vpd_find_tag(const u8 *buf, unsigned int off, unsigned int len, u8 rdt);
int pci_vpd_find_info_keyword(const u8 *buf, unsigned int off,
unsigned int len, const char *kw);
/**
* pci_find_upstream_pcie_bridge - find upstream PCIe-to-PCI bridge of a device
* @pdev: the PCI device
*
* if the device is PCIE, return NULL
* if the device isn't connected to a PCIe bridge (that is its parent is a
* legacy PCI bridge and the bridge is directly connected to bus 0), return its
* parent
*/
struct pci_dev *pci_find_upstream_pcie_bridge(struct pci_dev *pdev);
#endif /* __KERNEL__ */
#endif /* LINUX_PCI_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment