Commit 16ecd8d9 authored by Sasha Neftin's avatar Sasha Neftin Committed by Jeff Kirsher

igc: Remove the obsolete workaround

Enables a resend request after the completion timeout workaround is not
relevant for i225 device. This patch is clean code relevant this
workaround.
Minor cosmetic fixes, replace the 'spaces' with 'tabs'
Signed-off-by: default avatarSasha Neftin <sasha.neftin@intel.com>
Tested-by: default avatarAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent 796bfb10
...@@ -9,50 +9,6 @@ ...@@ -9,50 +9,6 @@
#include "igc_base.h" #include "igc_base.h"
#include "igc.h" #include "igc.h"
/**
* igc_set_pcie_completion_timeout - set pci-e completion timeout
* @hw: pointer to the HW structure
*/
static s32 igc_set_pcie_completion_timeout(struct igc_hw *hw)
{
u32 gcr = rd32(IGC_GCR);
u16 pcie_devctl2;
s32 ret_val = 0;
/* only take action if timeout value is defaulted to 0 */
if (gcr & IGC_GCR_CMPL_TMOUT_MASK)
goto out;
/* if capabilities version is type 1 we can write the
* timeout of 10ms to 200ms through the GCR register
*/
if (!(gcr & IGC_GCR_CAP_VER2)) {
gcr |= IGC_GCR_CMPL_TMOUT_10ms;
goto out;
}
/* for version 2 capabilities we need to write the config space
* directly in order to set the completion timeout value for
* 16ms to 55ms
*/
ret_val = igc_read_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2,
&pcie_devctl2);
if (ret_val)
goto out;
pcie_devctl2 |= PCIE_DEVICE_CONTROL2_16ms;
ret_val = igc_write_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2,
&pcie_devctl2);
out:
/* disable completion timeout resend */
gcr &= ~IGC_GCR_CMPL_TMOUT_RESEND;
wr32(IGC_GCR, gcr);
return ret_val;
}
/** /**
* igc_reset_hw_base - Reset hardware * igc_reset_hw_base - Reset hardware
* @hw: pointer to the HW structure * @hw: pointer to the HW structure
...@@ -72,11 +28,6 @@ static s32 igc_reset_hw_base(struct igc_hw *hw) ...@@ -72,11 +28,6 @@ static s32 igc_reset_hw_base(struct igc_hw *hw)
if (ret_val) if (ret_val)
hw_dbg("PCI-E Master disable polling has failed.\n"); hw_dbg("PCI-E Master disable polling has failed.\n");
/* set the completion timeout for interface */
ret_val = igc_set_pcie_completion_timeout(hw);
if (ret_val)
hw_dbg("PCI-E Set completion timeout has failed.\n");
hw_dbg("Masking off all interrupts\n"); hw_dbg("Masking off all interrupts\n");
wr32(IGC_IMC, 0xffffffff); wr32(IGC_IMC, 0xffffffff);
......
...@@ -5,8 +5,8 @@ ...@@ -5,8 +5,8 @@
#define _IGC_DEFINES_H_ #define _IGC_DEFINES_H_
/* Number of Transmit and Receive Descriptors must be a multiple of 8 */ /* Number of Transmit and Receive Descriptors must be a multiple of 8 */
#define REQ_TX_DESCRIPTOR_MULTIPLE 8 #define REQ_TX_DESCRIPTOR_MULTIPLE 8
#define REQ_RX_DESCRIPTOR_MULTIPLE 8 #define REQ_RX_DESCRIPTOR_MULTIPLE 8
#define IGC_CTRL_EXT_DRV_LOAD 0x10000000 /* Drv loaded bit for FW */ #define IGC_CTRL_EXT_DRV_LOAD 0x10000000 /* Drv loaded bit for FW */
...@@ -29,12 +29,6 @@ ...@@ -29,12 +29,6 @@
/* Status of Master requests. */ /* Status of Master requests. */
#define IGC_STATUS_GIO_MASTER_ENABLE 0x00080000 #define IGC_STATUS_GIO_MASTER_ENABLE 0x00080000
/* PCI Express Control */
#define IGC_GCR_CMPL_TMOUT_MASK 0x0000F000
#define IGC_GCR_CMPL_TMOUT_10ms 0x00001000
#define IGC_GCR_CMPL_TMOUT_RESEND 0x00010000
#define IGC_GCR_CAP_VER2 0x00040000
/* Receive Address /* Receive Address
* Number of high/low register pairs in the RAR. The RAR (Receive Address * Number of high/low register pairs in the RAR. The RAR (Receive Address
* Registers) holds the directed and multicast addresses that we monitor. * Registers) holds the directed and multicast addresses that we monitor.
...@@ -395,7 +389,7 @@ ...@@ -395,7 +389,7 @@
#define IGC_MDIC_ERROR 0x40000000 #define IGC_MDIC_ERROR 0x40000000
#define IGC_MDIC_DEST 0x80000000 #define IGC_MDIC_DEST 0x80000000
#define IGC_N0_QUEUE -1 #define IGC_N0_QUEUE -1
#define IGC_MAX_MAC_HDR_LEN 127 #define IGC_MAX_MAC_HDR_LEN 127
#define IGC_MAX_NETWORK_HDR_LEN 511 #define IGC_MAX_NETWORK_HDR_LEN 511
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment