Commit 16ecd8d9 authored by Sasha Neftin's avatar Sasha Neftin Committed by Jeff Kirsher

igc: Remove the obsolete workaround

Enables a resend request after the completion timeout workaround is not
relevant for i225 device. This patch is clean code relevant this
workaround.
Minor cosmetic fixes, replace the 'spaces' with 'tabs'
Signed-off-by: default avatarSasha Neftin <sasha.neftin@intel.com>
Tested-by: default avatarAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent 796bfb10
......@@ -9,50 +9,6 @@
#include "igc_base.h"
#include "igc.h"
/**
* igc_set_pcie_completion_timeout - set pci-e completion timeout
* @hw: pointer to the HW structure
*/
static s32 igc_set_pcie_completion_timeout(struct igc_hw *hw)
{
u32 gcr = rd32(IGC_GCR);
u16 pcie_devctl2;
s32 ret_val = 0;
/* only take action if timeout value is defaulted to 0 */
if (gcr & IGC_GCR_CMPL_TMOUT_MASK)
goto out;
/* if capabilities version is type 1 we can write the
* timeout of 10ms to 200ms through the GCR register
*/
if (!(gcr & IGC_GCR_CAP_VER2)) {
gcr |= IGC_GCR_CMPL_TMOUT_10ms;
goto out;
}
/* for version 2 capabilities we need to write the config space
* directly in order to set the completion timeout value for
* 16ms to 55ms
*/
ret_val = igc_read_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2,
&pcie_devctl2);
if (ret_val)
goto out;
pcie_devctl2 |= PCIE_DEVICE_CONTROL2_16ms;
ret_val = igc_write_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2,
&pcie_devctl2);
out:
/* disable completion timeout resend */
gcr &= ~IGC_GCR_CMPL_TMOUT_RESEND;
wr32(IGC_GCR, gcr);
return ret_val;
}
/**
* igc_reset_hw_base - Reset hardware
* @hw: pointer to the HW structure
......@@ -72,11 +28,6 @@ static s32 igc_reset_hw_base(struct igc_hw *hw)
if (ret_val)
hw_dbg("PCI-E Master disable polling has failed.\n");
/* set the completion timeout for interface */
ret_val = igc_set_pcie_completion_timeout(hw);
if (ret_val)
hw_dbg("PCI-E Set completion timeout has failed.\n");
hw_dbg("Masking off all interrupts\n");
wr32(IGC_IMC, 0xffffffff);
......
......@@ -29,12 +29,6 @@
/* Status of Master requests. */
#define IGC_STATUS_GIO_MASTER_ENABLE 0x00080000
/* PCI Express Control */
#define IGC_GCR_CMPL_TMOUT_MASK 0x0000F000
#define IGC_GCR_CMPL_TMOUT_10ms 0x00001000
#define IGC_GCR_CMPL_TMOUT_RESEND 0x00010000
#define IGC_GCR_CAP_VER2 0x00040000
/* Receive Address
* Number of high/low register pairs in the RAR. The RAR (Receive Address
* Registers) holds the directed and multicast addresses that we monitor.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment