Commit 16ed1416 authored by Paul Mackerras's avatar Paul Mackerras Committed by Michael Ellerman

powerpc/64: Make type of partition table flush depend on partition type

When changing a partition table entry on POWER9, we do a particular
form of the tlbie instruction which flushes all TLBs and caches of
the partition table for a given logical partition ID (LPID).
This instruction has a field in the instruction word, labelled R
(radix), which should be 1 if the partition was previously a radix
partition and 0 if it was a HPT partition.  This implements that
logic.
Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
parent ba9b399a
......@@ -454,11 +454,21 @@ void __init mmu_partition_table_init(void)
void mmu_partition_table_set_entry(unsigned int lpid, unsigned long dw0,
unsigned long dw1)
{
unsigned long old = be64_to_cpu(partition_tb[lpid].patb0);
partition_tb[lpid].patb0 = cpu_to_be64(dw0);
partition_tb[lpid].patb1 = cpu_to_be64(dw1);
/* Global flush of TLBs and partition table caches for this lpid */
/*
* Global flush of TLBs and partition table caches for this lpid.
* The type of flush (hash or radix) depends on what the previous
* use of this partition ID was, not the new use.
*/
asm volatile("ptesync" : : : "memory");
if (old & PATB_HR)
asm volatile(PPC_TLBIE_5(%0,%1,2,0,1) : :
"r" (TLBIEL_INVAL_SET_LPID), "r" (lpid));
else
asm volatile(PPC_TLBIE_5(%0,%1,2,0,0) : :
"r" (TLBIEL_INVAL_SET_LPID), "r" (lpid));
asm volatile("eieio; tlbsync; ptesync" : : : "memory");
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment