Skip to content

L
linux
Commit 16f96154 authored by Arnd Bergmann's avatar Arnd Bergmann Committed by Lee Jones
Browse files
Options

mfd: Remove support for AB3100 

The ST-Ericsson U300 platform has been removed, so this driver is no
longer needed.
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Reviewed-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
parent a98688d2
Show whitespace changes
Inline Side-by-side
Showing with 1 addition and 1324 deletions
drivers/mfd/Kconfig
View file @ 16f96154
......@@ -1235,7 +1235,7 @@ config MFD_SC27XX_PMIC
config ABX500_CORE
bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
default y if ARCH_U300 || ARCH_U8500 || COMPILE_TEST
default y if ARCH_U8500 || COMPILE_TEST
help
Say yes here if you have the ABX500 Mixed Signal IC family
chips. This core driver expose register access functions.
......@@ -1243,30 +1243,6 @@ config ABX500_CORE
remain unchanged when IC changes. Binding of the functions to
actual register access is done by the IC core driver.
config AB3100_CORE
bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
depends on I2C=y && ABX500_CORE
select MFD_CORE
default y if ARCH_U300
help
Select this to enable the AB3100 Mixed Signal IC core
functionality. This connects to a AB3100 on the I2C bus
and expose a number of symbols needed for dependent devices
to read and write registers and subscribe to events from
this multi-functional IC. This is needed to use other features
of the AB3100 such as battery-backed RTC, charging control,
LEDs, vibrator, system power and temperature, power management
and ALSA sound.
config AB3100_OTP
tristate "ST-Ericsson AB3100 OTP functions"
depends on AB3100_CORE
default y if AB3100_CORE
help
Select this to enable the AB3100 Mixed Signal IC OTP (one-time
programmable memory) support. This exposes a sysfs file to read
out OTP values.
config AB8500_CORE
bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
depends on ABX500_CORE && MFD_DB8500_PRCMU
......
drivers/mfd/Makefile
View file @ 16f96154
......@@ -178,8 +178,6 @@ obj-$(CONFIG_MFD_PCF50633) += pcf50633.o
obj-$(CONFIG_PCF50633_ADC) += pcf50633-adc.o
obj-$(CONFIG_PCF50633_GPIO) += pcf50633-gpio.o
obj-$(CONFIG_ABX500_CORE) += abx500-core.o
obj-$(CONFIG_AB3100_CORE) += ab3100-core.o
obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o
obj-$(CONFIG_AB8500_DEBUG) += ab8500-debugfs.o
obj-$(CONFIG_MFD_DB8500_PRCMU) += db8500-prcmu.o
# ab8500-core need to come after db8500-prcmu (which provides the channel)
......
drivers/mfd/ab3100-core.c deleted 100644 → 0
View file @ a98688d2
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2007-2010 ST-Ericsson
* Low-level core for exclusive access to the AB3100 IC on the I2C bus
* and some basic chip-configuration.
* Author: Linus Walleij <linus.walleij@stericsson.com>
*/
#include <linux/i2c.h>
#include <linux/mutex.h>
#include <linux/list.h>
#include <linux/notifier.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/random.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/uaccess.h>
#include <linux/mfd/core.h>
#include <linux/mfd/ab3100.h>
#include <linux/mfd/abx500.h>
/* These are the only registers inside AB3100 used in this main file */
/* Interrupt event registers */
#define AB3100_EVENTA1 0x21
#define AB3100_EVENTA2 0x22
#define AB3100_EVENTA3 0x23
/* AB3100 DAC converter registers */
#define AB3100_DIS 0x00
#define AB3100_D0C 0x01
#define AB3100_D1C 0x02
#define AB3100_D2C 0x03
#define AB3100_D3C 0x04
/* Chip ID register */
#define AB3100_CID 0x20
/* AB3100 interrupt registers */
#define AB3100_IMRA1 0x24
#define AB3100_IMRA2 0x25
#define AB3100_IMRA3 0x26
#define AB3100_IMRB1 0x2B
#define AB3100_IMRB2 0x2C
#define AB3100_IMRB3 0x2D
/* System Power Monitoring and control registers */
#define AB3100_MCA 0x2E
#define AB3100_MCB 0x2F
/* SIM power up */
#define AB3100_SUP 0x50
/*
* I2C communication
*
* The AB3100 is usually assigned address 0x48 (7-bit)
* The chip is defined in the platform i2c_board_data section.
*/
static int ab3100_get_chip_id(struct device *dev)
{
struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
return (int)ab3100->chip_id;
}
static int ab3100_set_register_interruptible(struct ab3100 *ab3100,
u8 reg, u8 regval)
{
u8 regandval[2] = {reg, regval};
int err;
err = mutex_lock_interruptible(&ab3100->access_mutex);
if (err)
return err;
/*
* A two-byte write message with the first byte containing the register
* number and the second byte containing the value to be written
* effectively sets a register in the AB3100.
*/
err = i2c_master_send(ab3100->i2c_client, regandval, 2);
if (err < 0) {
dev_err(ab3100->dev,
"write error (write register): %d\n",
err);
} else if (err != 2) {
dev_err(ab3100->dev,
"write error (write register)\n"
" %d bytes transferred (expected 2)\n",
err);
err = -EIO;
} else {
/* All is well */
err = 0;
}
mutex_unlock(&ab3100->access_mutex);
return err;
}
static int set_register_interruptible(struct device *dev,
u8 bank, u8 reg, u8 value)
{
struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
return ab3100_set_register_interruptible(ab3100, reg, value);
}
/*
* The test registers exist at an I2C bus address up one
* from the ordinary base. They are not supposed to be used
* in production code, but sometimes you have to do that
* anyway. It's currently only used from this file so declare
* it static and do not export.
*/
static int ab3100_set_test_register_interruptible(struct ab3100 *ab3100,
u8 reg, u8 regval)
{
u8 regandval[2] = {reg, regval};
int err;
err = mutex_lock_interruptible(&ab3100->access_mutex);
if (err)
return err;
err = i2c_master_send(ab3100->testreg_client, regandval, 2);
if (err < 0) {
dev_err(ab3100->dev,
"write error (write test register): %d\n",
err);
} else if (err != 2) {
dev_err(ab3100->dev,
"write error (write test register)\n"
" %d bytes transferred (expected 2)\n",
err);
err = -EIO;
} else {
/* All is well */
err = 0;
}
mutex_unlock(&ab3100->access_mutex);
return err;
}
static int ab3100_get_register_interruptible(struct ab3100 *ab3100,
u8 reg, u8 *regval)
{
int err;
err = mutex_lock_interruptible(&ab3100->access_mutex);
if (err)
return err;
/*
* AB3100 require an I2C "stop" command between each message, else
* it will not work. The only way of achieveing this with the
* message transport layer is to send the read and write messages
* separately.
*/
err = i2c_master_send(ab3100->i2c_client, &reg, 1);
if (err < 0) {
dev_err(ab3100->dev,
"write error (send register address): %d\n",
err);
goto get_reg_out_unlock;
} else if (err != 1) {
dev_err(ab3100->dev,
"write error (send register address)\n"
" %d bytes transferred (expected 1)\n",
err);
err = -EIO;
goto get_reg_out_unlock;
} else {
/* All is well */
err = 0;
}
err = i2c_master_recv(ab3100->i2c_client, regval, 1);
if (err < 0) {
dev_err(ab3100->dev,
"write error (read register): %d\n",
err);
goto get_reg_out_unlock;
} else if (err != 1) {
dev_err(ab3100->dev,
"write error (read register)\n"
" %d bytes transferred (expected 1)\n",
err);
err = -EIO;
goto get_reg_out_unlock;
} else {
/* All is well */
err = 0;
}
get_reg_out_unlock:
mutex_unlock(&ab3100->access_mutex);
return err;
}
static int get_register_interruptible(struct device *dev, u8 bank, u8 reg,
u8 *value)
{
struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
return ab3100_get_register_interruptible(ab3100, reg, value);
}
static int ab3100_get_register_page_interruptible(struct ab3100 *ab3100,
u8 first_reg, u8 *regvals, u8 numregs)
{
int err;
if (ab3100->chip_id == 0xa0 ||
ab3100->chip_id == 0xa1)
/* These don't support paged reads */
return -EIO;
err = mutex_lock_interruptible(&ab3100->access_mutex);
if (err)
return err;
/*
* Paged read also require an I2C "stop" command.
*/
err = i2c_master_send(ab3100->i2c_client, &first_reg, 1);
if (err < 0) {
dev_err(ab3100->dev,
"write error (send first register address): %d\n",
err);
goto get_reg_page_out_unlock;
} else if (err != 1) {
dev_err(ab3100->dev,
"write error (send first register address)\n"
" %d bytes transferred (expected 1)\n",
err);
err = -EIO;
goto get_reg_page_out_unlock;
}
err = i2c_master_recv(ab3100->i2c_client, regvals, numregs);
if (err < 0) {
dev_err(ab3100->dev,
"write error (read register page): %d\n",
err);
goto get_reg_page_out_unlock;
} else if (err != numregs) {
dev_err(ab3100->dev,
"write error (read register page)\n"
" %d bytes transferred (expected %d)\n",
err, numregs);
err = -EIO;
goto get_reg_page_out_unlock;
}
/* All is well */
err = 0;
get_reg_page_out_unlock:
mutex_unlock(&ab3100->access_mutex);
return err;
}
static int get_register_page_interruptible(struct device *dev, u8 bank,
u8 first_reg, u8 *regvals, u8 numregs)
{
struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
return ab3100_get_register_page_interruptible(ab3100,
first_reg, regvals, numregs);
}
static int ab3100_mask_and_set_register_interruptible(struct ab3100 *ab3100,
u8 reg, u8 andmask, u8 ormask)
{
u8 regandval[2] = {reg, 0};
int err;
err = mutex_lock_interruptible(&ab3100->access_mutex);
if (err)
return err;
/* First read out the target register */
err = i2c_master_send(ab3100->i2c_client, &reg, 1);
if (err < 0) {
dev_err(ab3100->dev,
"write error (maskset send address): %d\n",
err);
goto get_maskset_unlock;
} else if (err != 1) {
dev_err(ab3100->dev,
"write error (maskset send address)\n"
" %d bytes transferred (expected 1)\n",
err);
err = -EIO;
goto get_maskset_unlock;
}
err = i2c_master_recv(ab3100->i2c_client, &regandval[1], 1);
if (err < 0) {
dev_err(ab3100->dev,
"write error (maskset read register): %d\n",
err);
goto get_maskset_unlock;
} else if (err != 1) {
dev_err(ab3100->dev,
"write error (maskset read register)\n"
" %d bytes transferred (expected 1)\n",
err);
err = -EIO;
goto get_maskset_unlock;
}
/* Modify the register */
regandval[1] &= andmask;
regandval[1] |= ormask;
/* Write the register */
err = i2c_master_send(ab3100->i2c_client, regandval, 2);
if (err < 0) {
dev_err(ab3100->dev,
"write error (write register): %d\n",
err);
goto get_maskset_unlock;
} else if (err != 2) {
dev_err(ab3100->dev,
"write error (write register)\n"
" %d bytes transferred (expected 2)\n",
err);
err = -EIO;
goto get_maskset_unlock;
}
/* All is well */
err = 0;
get_maskset_unlock:
mutex_unlock(&ab3100->access_mutex);
return err;
}
static int mask_and_set_register_interruptible(struct device *dev, u8 bank,
u8 reg, u8 bitmask, u8 bitvalues)
{
struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
return ab3100_mask_and_set_register_interruptible(ab3100,
reg, bitmask, (bitmask & bitvalues));
}
/*
* Register a simple callback for handling any AB3100 events.
*/
int ab3100_event_register(struct ab3100 *ab3100,
struct notifier_block *nb)
{
return blocking_notifier_chain_register(&ab3100->event_subscribers,
nb);
}
EXPORT_SYMBOL(ab3100_event_register);
/*
* Remove a previously registered callback.
*/
int ab3100_event_unregister(struct ab3100 *ab3100,
struct notifier_block *nb)
{
return blocking_notifier_chain_unregister(&ab3100->event_subscribers,
nb);
}
EXPORT_SYMBOL(ab3100_event_unregister);
static int ab3100_event_registers_startup_state_get(struct device *dev,
u8 *event)
{
struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
if (!ab3100->startup_events_read)
return -EAGAIN; /* Try again later */
memcpy(event, ab3100->startup_events, 3);
return 0;
}
static struct abx500_ops ab3100_ops = {
.get_chip_id = ab3100_get_chip_id,
.set_register = set_register_interruptible,
.get_register = get_register_interruptible,
.get_register_page = get_register_page_interruptible,
.set_register_page = NULL,
.mask_and_set_register = mask_and_set_register_interruptible,
.event_registers_startup_state_get =
ab3100_event_registers_startup_state_get,
.startup_irq_enabled = NULL,
};
/*
* This is a threaded interrupt handler so we can make some
* I2C calls etc.
*/
static irqreturn_t ab3100_irq_handler(int irq, void *data)
{
struct ab3100 *ab3100 = data;
u8 event_regs[3];
u32 fatevent;
int err;
err = ab3100_get_register_page_interruptible(ab3100, AB3100_EVENTA1,
event_regs, 3);
if (err)
goto err_event;
fatevent = (event_regs[0] << 16) |
(event_regs[1] << 8) |
event_regs[2];
if (!ab3100->startup_events_read) {
ab3100->startup_events[0] = event_regs[0];
ab3100->startup_events[1] = event_regs[1];
ab3100->startup_events[2] = event_regs[2];
ab3100->startup_events_read = true;
}
/*
* The notified parties will have to mask out the events
* they're interested in and react to them. They will be
* notified on all events, then they use the fatevent value
* to determine if they're interested.
*/
blocking_notifier_call_chain(&ab3100->event_subscribers,
fatevent, NULL);
dev_dbg(ab3100->dev,
"IRQ Event: 0x%08x\n", fatevent);
return IRQ_HANDLED;
err_event:
dev_dbg(ab3100->dev,
"error reading event status\n");
return IRQ_HANDLED;
}
#ifdef CONFIG_DEBUG_FS
/*
* Some debugfs entries only exposed if we're using debug
*/
static int ab3100_registers_print(struct seq_file *s, void *p)
{
struct ab3100 *ab3100 = s->private;
u8 value;
u8 reg;
seq_puts(s, "AB3100 registers:\n");
for (reg = 0; reg < 0xff; reg++) {
ab3100_get_register_interruptible(ab3100, reg, &value);
seq_printf(s, "[0x%x]: 0x%x\n", reg, value);
}
return 0;
}
static int ab3100_registers_open(struct inode *inode, struct file *file)
{
return single_open(file, ab3100_registers_print, inode->i_private);
}
static const struct file_operations ab3100_registers_fops = {
.open = ab3100_registers_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
.owner = THIS_MODULE,
};
struct ab3100_get_set_reg_priv {
struct ab3100 *ab3100;
bool mode;
};
static ssize_t ab3100_get_set_reg(struct file *file,
const char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ab3100_get_set_reg_priv *priv = file->private_data;
struct ab3100 *ab3100 = priv->ab3100;
char buf[32];
ssize_t buf_size;
int regp;
u8 user_reg;
int err;
int i = 0;
/* Get userspace string and assure termination */
buf_size = min((ssize_t)count, (ssize_t)(sizeof(buf)-1));
if (copy_from_user(buf, user_buf, buf_size))
return -EFAULT;
buf[buf_size] = 0;
/*
* The idea is here to parse a string which is either
* "0xnn" for reading a register, or "0xaa 0xbb" for
* writing 0xbb to the register 0xaa. First move past
* whitespace and then begin to parse the register.
*/
while ((i < buf_size) && (buf[i] == ' '))
i++;
regp = i;
/*
* Advance pointer to end of string then terminate
* the register string. This is needed to satisfy
* the kstrtou8() function.
*/
while ((i < buf_size) && (buf[i] != ' '))
i++;
buf[i] = '\0';
err = kstrtou8(&buf[regp], 16, &user_reg);
if (err)
return err;
/* Either we read or we write a register here */
if (!priv->mode) {
/* Reading */
u8 regvalue;
ab3100_get_register_interruptible(ab3100, user_reg, &regvalue);
dev_info(ab3100->dev,
"debug read AB3100 reg[0x%02x]: 0x%02x\n",
user_reg, regvalue);
} else {
int valp;
u8 user_value;
u8 regvalue;
/*
* Writing, we need some value to write to
* the register so keep parsing the string
* from userspace.
*/
i++;
while ((i < buf_size) && (buf[i] == ' '))
i++;
valp = i;
while ((i < buf_size) && (buf[i] != ' '))
i++;
buf[i] = '\0';
err = kstrtou8(&buf[valp], 16, &user_value);
if (err)
return err;
ab3100_set_register_interruptible(ab3100, user_reg, user_value);
ab3100_get_register_interruptible(ab3100, user_reg, &regvalue);
dev_info(ab3100->dev,
"debug write reg[0x%02x]\n"
" with 0x%02x, after readback: 0x%02x\n",
user_reg, user_value, regvalue);
}
return buf_size;
}
static const struct file_operations ab3100_get_set_reg_fops = {
.open = simple_open,
.write = ab3100_get_set_reg,
.llseek = noop_llseek,
};
static struct ab3100_get_set_reg_priv ab3100_get_priv;
static struct ab3100_get_set_reg_priv ab3100_set_priv;
static void ab3100_setup_debugfs(struct ab3100 *ab3100)
{
struct dentry *ab3100_dir;
ab3100_dir = debugfs_create_dir("ab3100", NULL);
debugfs_create_file("registers", S_IRUGO, ab3100_dir, ab3100,
&ab3100_registers_fops);
ab3100_get_priv.ab3100 = ab3100;
ab3100_get_priv.mode = false;
debugfs_create_file("get_reg", S_IWUSR, ab3100_dir, &ab3100_get_priv,
&ab3100_get_set_reg_fops);
ab3100_set_priv.ab3100 = ab3100;
ab3100_set_priv.mode = true;
debugfs_create_file("set_reg", S_IWUSR, ab3100_dir, &ab3100_set_priv,
&ab3100_get_set_reg_fops);
}
#else
static inline void ab3100_setup_debugfs(struct ab3100 *ab3100)
{
}
#endif
/*
* Basic set-up, datastructure creation/destruction and I2C interface.
* This sets up a default config in the AB3100 chip so that it
* will work as expected.
*/
struct ab3100_init_setting {
u8 abreg;
u8 setting;
};
static const struct ab3100_init_setting ab3100_init_settings[] = {
{
.abreg = AB3100_MCA,
.setting = 0x01
}, {
.abreg = AB3100_MCB,
.setting = 0x30
}, {
.abreg = AB3100_IMRA1,
.setting = 0x00
}, {
.abreg = AB3100_IMRA2,
.setting = 0xFF
}, {
.abreg = AB3100_IMRA3,
.setting = 0x01
}, {
.abreg = AB3100_IMRB1,
.setting = 0xBF
}, {
.abreg = AB3100_IMRB2,
.setting = 0xFF
}, {
.abreg = AB3100_IMRB3,
.setting = 0xFF
}, {
.abreg = AB3100_SUP,
.setting = 0x00
}, {
.abreg = AB3100_DIS,
.setting = 0xF0
}, {
.abreg = AB3100_D0C,
.setting = 0x00
}, {
.abreg = AB3100_D1C,
.setting = 0x00
}, {
.abreg = AB3100_D2C,
.setting = 0x00
}, {
.abreg = AB3100_D3C,
.setting = 0x00
},
};
static int ab3100_setup(struct ab3100 *ab3100)
{
int err = 0;
int i;
for (i = 0; i < ARRAY_SIZE(ab3100_init_settings); i++) {
err = ab3100_set_register_interruptible(ab3100,
ab3100_init_settings[i].abreg,
ab3100_init_settings[i].setting);
if (err)
goto exit_no_setup;
}
/*
* Special trick to make the AB3100 use the 32kHz clock (RTC)
* bit 3 in test register 0x02 is a special, undocumented test
* register bit that only exist in AB3100 P1E
*/
if (ab3100->chip_id == 0xc4) {
dev_warn(ab3100->dev,
"AB3100 P1E variant detected forcing chip to 32KHz\n");
err = ab3100_set_test_register_interruptible(ab3100,
0x02, 0x08);
}
exit_no_setup:
return err;
}
/* The subdevices of the AB3100 */
static struct mfd_cell ab3100_devs[] = {
{
.name = "ab3100-dac",
.id = -1,
},
{
.name = "ab3100-leds",
.id = -1,
},
{
.name = "ab3100-power",
.id = -1,
},
{
.name = "ab3100-regulators",
.of_compatible = "stericsson,ab3100-regulators",
.id = -1,
},
{
.name = "ab3100-sim",
.id = -1,
},
{
.name = "ab3100-uart",
.id = -1,
},
{
.name = "ab3100-rtc",
.id = -1,
},
{
.name = "ab3100-charger",
.id = -1,
},
{
.name = "ab3100-boost",
.id = -1,
},
{
.name = "ab3100-adc",
.id = -1,
},
{
.name = "ab3100-fuelgauge",
.id = -1,
},
{
.name = "ab3100-vibrator",
.id = -1,
},
{
.name = "ab3100-otp",
.id = -1,
},
{
.name = "ab3100-codec",
.id = -1,
},
};
struct ab_family_id {
u8 id;
char *name;
};
static const struct ab_family_id ids[] = {
/* AB3100 */
{
.id = 0xc0,
.name = "P1A"
}, {
.id = 0xc1,
.name = "P1B"
}, {
.id = 0xc2,
.name = "P1C"
}, {
.id = 0xc3,
.name = "P1D"
}, {
.id = 0xc4,
.name = "P1E"
}, {
.id = 0xc5,
.name = "P1F/R1A"
}, {
.id = 0xc6,
.name = "P1G/R1A"
}, {
.id = 0xc7,
.name = "P2A/R2A"
}, {
.id = 0xc8,
.name = "P2B/R2B"
},
/* AB3000 variants, not supported */
{
.id = 0xa0
}, {
.id = 0xa1
}, {
.id = 0xa2
}, {
.id = 0xa3
}, {
.id = 0xa4
}, {
.id = 0xa5
}, {
.id = 0xa6
}, {
.id = 0xa7
},
/* Terminator */
{
.id = 0x00,
},
};
static int ab3100_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct ab3100 *ab3100;
struct ab3100_platform_data *ab3100_plf_data =
dev_get_platdata(&client->dev);
int err;
int i;
ab3100 = devm_kzalloc(&client->dev, sizeof(struct ab3100), GFP_KERNEL);
if (!ab3100)
return -ENOMEM;
/* Initialize data structure */
mutex_init(&ab3100->access_mutex);
BLOCKING_INIT_NOTIFIER_HEAD(&ab3100->event_subscribers);
ab3100->i2c_client = client;
ab3100->dev = &ab3100->i2c_client->dev;
i2c_set_clientdata(client, ab3100);
/* Read chip ID register */
err = ab3100_get_register_interruptible(ab3100, AB3100_CID,
&ab3100->chip_id);
if (err) {
dev_err(&client->dev,
"failed to communicate with AB3100 chip\n");
goto exit_no_detect;
}
for (i = 0; ids[i].id != 0x0; i++) {
if (ids[i].id == ab3100->chip_id) {
if (ids[i].name)
break;
dev_err(&client->dev, "AB3000 is not supported\n");
goto exit_no_detect;
}
}
snprintf(&ab3100->chip_name[0],
sizeof(ab3100->chip_name) - 1, "AB3100 %s", ids[i].name);
if (ids[i].id == 0x0) {
dev_err(&client->dev, "unknown analog baseband chip id: 0x%x\n",
ab3100->chip_id);
dev_err(&client->dev,
"accepting it anyway. Please update the driver.\n");
goto exit_no_detect;
}
dev_info(&client->dev, "Detected chip: %s\n",
&ab3100->chip_name[0]);
/* Attach a second dummy i2c_client to the test register address */
ab3100->testreg_client = i2c_new_dummy_device(client->adapter,
client->addr + 1);
if (IS_ERR(ab3100->testreg_client)) {
err = PTR_ERR(ab3100->testreg_client);
goto exit_no_testreg_client;
}
err = ab3100_setup(ab3100);
if (err)
goto exit_no_setup;
err = devm_request_threaded_irq(&client->dev,
client->irq, NULL, ab3100_irq_handler,
IRQF_ONESHOT, "ab3100-core", ab3100);
if (err)
goto exit_no_irq;
err = abx500_register_ops(&client->dev, &ab3100_ops);
if (err)
goto exit_no_ops;
/* Set up and register the platform devices. */
for (i = 0; i < ARRAY_SIZE(ab3100_devs); i++) {
ab3100_devs[i].platform_data = ab3100_plf_data;
ab3100_devs[i].pdata_size = sizeof(struct ab3100_platform_data);
}
err = mfd_add_devices(&client->dev, 0, ab3100_devs,
ARRAY_SIZE(ab3100_devs), NULL, 0, NULL);
ab3100_setup_debugfs(ab3100);
return 0;
exit_no_ops:
exit_no_irq:
exit_no_setup:
i2c_unregister_device(ab3100->testreg_client);
exit_no_testreg_client:
exit_no_detect:
return err;
}
static const struct i2c_device_id ab3100_id[] = {
{ "ab3100", 0 },
{ }
};
static struct i2c_driver ab3100_driver = {
.driver = {
.name = "ab3100",
.suppress_bind_attrs = true,
},
.id_table = ab3100_id,
.probe = ab3100_probe,
};
static int __init ab3100_i2c_init(void)
{
return i2c_add_driver(&ab3100_driver);
}
subsys_initcall(ab3100_i2c_init);
drivers/mfd/ab3100-otp.c deleted 100644 → 0
View file @ a98688d2
// SPDX-License-Identifier: GPL-2.0-only
/*
* drivers/mfd/ab3100_otp.c
*
* Copyright (C) 2007-2009 ST-Ericsson AB
* Driver to read out OTP from the AB3100 Mixed-signal circuit
* Author: Linus Walleij <linus.walleij@stericsson.com>
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mfd/abx500.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
/* The OTP registers */
#define AB3100_OTP0 0xb0
#define AB3100_OTP1 0xb1
#define AB3100_OTP2 0xb2
#define AB3100_OTP3 0xb3
#define AB3100_OTP4 0xb4
#define AB3100_OTP5 0xb5
#define AB3100_OTP6 0xb6
#define AB3100_OTP7 0xb7
#define AB3100_OTPP 0xbf
/**
* struct ab3100_otp
* @dev: containing device
* @locked: whether the OTP is locked, after locking, no more bits
* can be changed but before locking it is still possible
* to change bits from 1->0.
* @freq: clocking frequency for the OTP, this frequency is either
* 32768Hz or 1MHz/30
* @paf: product activation flag, indicates whether this is a real
* product (paf true) or a lab board etc (paf false)
* @imeich: if this is set it is possible to override the
* IMEI number found in the tac, fac and svn fields with
* (secured) software
* @cid: customer ID
* @tac: type allocation code of the IMEI
* @fac: final assembly code of the IMEI
* @svn: software version number of the IMEI
* @debugfs: a debugfs file used when dumping to file
*/
struct ab3100_otp {
struct device *dev;
bool locked;
u32 freq;
bool paf;
bool imeich;
u16 cid:14;
u32 tac:20;
u8 fac;
u32 svn:20;
struct dentry *debugfs;
};
static int __init ab3100_otp_read(struct ab3100_otp *otp)
{
u8 otpval[8];
u8 otpp;
int err;
err = abx500_get_register_interruptible(otp->dev, 0,
AB3100_OTPP, &otpp);
if (err) {
dev_err(otp->dev, "unable to read OTPP register\n");
return err;
}
err = abx500_get_register_page_interruptible(otp->dev, 0,
AB3100_OTP0, otpval, 8);
if (err) {
dev_err(otp->dev, "unable to read OTP register page\n");
return err;
}
/* Cache OTP properties, they never change by nature */
otp->locked = (otpp & 0x80);
otp->freq = (otpp & 0x40) ? 32768 : 34100;
otp->paf = (otpval[1] & 0x80);
otp->imeich = (otpval[1] & 0x40);
otp->cid = ((otpval[1] << 8) | otpval[0]) & 0x3fff;
otp->tac = ((otpval[4] & 0x0f) << 16) | (otpval[3] << 8) | otpval[2];
otp->fac = ((otpval[5] & 0x0f) << 4) | (otpval[4] >> 4);
otp->svn = (otpval[7] << 12) | (otpval[6] << 4) | (otpval[5] >> 4);
return 0;
}
/*
* This is a simple debugfs human-readable file that dumps out
* the contents of the OTP.
*/
#ifdef CONFIG_DEBUG_FS
static int ab3100_show_otp(struct seq_file *s, void *v)
{
struct ab3100_otp *otp = s->private;
seq_printf(s, "OTP is %s\n", otp->locked ? "LOCKED" : "UNLOCKED");
seq_printf(s, "OTP clock switch startup is %uHz\n", otp->freq);
seq_printf(s, "PAF is %s\n", otp->paf ? "SET" : "NOT SET");
seq_printf(s, "IMEI is %s\n", otp->imeich ?
"CHANGEABLE" : "NOT CHANGEABLE");
seq_printf(s, "CID: 0x%04x (decimal: %d)\n", otp->cid, otp->cid);
seq_printf(s, "IMEI: %u-%u-%u\n", otp->tac, otp->fac, otp->svn);
return 0;
}
static int ab3100_otp_open(struct inode *inode, struct file *file)
{
return single_open(file, ab3100_show_otp, inode->i_private);
}
static const struct file_operations ab3100_otp_operations = {
.open = ab3100_otp_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static void __init ab3100_otp_init_debugfs(struct device *dev,
struct ab3100_otp *otp)
{
otp->debugfs = debugfs_create_file("ab3100_otp", S_IFREG | S_IRUGO,
NULL, otp, &ab3100_otp_operations);
}
static void __exit ab3100_otp_exit_debugfs(struct ab3100_otp *otp)
{
debugfs_remove(otp->debugfs);
}
#else
/* Compile this out if debugfs not selected */
static inline void __init ab3100_otp_init_debugfs(struct device *dev,
struct ab3100_otp *otp)
{
}
static inline void __exit ab3100_otp_exit_debugfs(struct ab3100_otp *otp)
{
}
#endif
#define SHOW_AB3100_ATTR(name) \
static ssize_t ab3100_otp_##name##_show(struct device *dev, \
struct device_attribute *attr, \
char *buf) \
{\
struct ab3100_otp *otp = dev_get_drvdata(dev); \
return sprintf(buf, "%u\n", otp->name); \
}
SHOW_AB3100_ATTR(locked)
SHOW_AB3100_ATTR(freq)
SHOW_AB3100_ATTR(paf)
SHOW_AB3100_ATTR(imeich)
SHOW_AB3100_ATTR(cid)
SHOW_AB3100_ATTR(fac)
SHOW_AB3100_ATTR(tac)
SHOW_AB3100_ATTR(svn)
static struct device_attribute ab3100_otp_attrs[] = {
__ATTR(locked, S_IRUGO, ab3100_otp_locked_show, NULL),
__ATTR(freq, S_IRUGO, ab3100_otp_freq_show, NULL),
__ATTR(paf, S_IRUGO, ab3100_otp_paf_show, NULL),
__ATTR(imeich, S_IRUGO, ab3100_otp_imeich_show, NULL),
__ATTR(cid, S_IRUGO, ab3100_otp_cid_show, NULL),
__ATTR(fac, S_IRUGO, ab3100_otp_fac_show, NULL),
__ATTR(tac, S_IRUGO, ab3100_otp_tac_show, NULL),
__ATTR(svn, S_IRUGO, ab3100_otp_svn_show, NULL),
};
static int __init ab3100_otp_probe(struct platform_device *pdev)
{
struct ab3100_otp *otp;
int err = 0;
int i;
otp = devm_kzalloc(&pdev->dev, sizeof(struct ab3100_otp), GFP_KERNEL);
if (!otp)
return -ENOMEM;
otp->dev = &pdev->dev;
/* Replace platform data coming in with a local struct */
platform_set_drvdata(pdev, otp);
err = ab3100_otp_read(otp);
if (err)
return err;
dev_info(&pdev->dev, "AB3100 OTP readout registered\n");
/* sysfs entries */
for (i = 0; i < ARRAY_SIZE(ab3100_otp_attrs); i++) {
err = device_create_file(&pdev->dev,
&ab3100_otp_attrs[i]);
if (err)
goto err;
}
/* debugfs entries */
ab3100_otp_init_debugfs(&pdev->dev, otp);
return 0;
err:
while (--i >= 0)
device_remove_file(&pdev->dev, &ab3100_otp_attrs[i]);
return err;
}
static int __exit ab3100_otp_remove(struct platform_device *pdev)
{
struct ab3100_otp *otp = platform_get_drvdata(pdev);
int i;
for (i = 0; i < ARRAY_SIZE(ab3100_otp_attrs); i++)
device_remove_file(&pdev->dev,
&ab3100_otp_attrs[i]);
ab3100_otp_exit_debugfs(otp);
return 0;
}
static struct platform_driver ab3100_otp_driver = {
.driver = {
.name = "ab3100-otp",
},
.remove = __exit_p(ab3100_otp_remove),
};
module_platform_driver_probe(ab3100_otp_driver, ab3100_otp_probe);
MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
MODULE_DESCRIPTION("AB3100 OTP Readout Driver");
MODULE_LICENSE("GPL");
include/linux/mfd/ab3100.h deleted 100644 → 0
View file @ a98688d2
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2007-2009 ST-Ericsson AB
* AB3100 core access functions
* Author: Linus Walleij <linus.walleij@stericsson.com>
*/
#include <linux/regulator/machine.h>
struct device;
#ifndef MFD_AB3100_H
#define MFD_AB3100_H
#define AB3100_P1A 0xc0
#define AB3100_P1B 0xc1
#define AB3100_P1C 0xc2
#define AB3100_P1D 0xc3
#define AB3100_P1E 0xc4
#define AB3100_P1F 0xc5
#define AB3100_P1G 0xc6
#define AB3100_R2A 0xc7
#define AB3100_R2B 0xc8
/*
* AB3100, EVENTA1, A2 and A3 event register flags
* these are catenated into a single 32-bit flag in the code
* for event notification broadcasts.
*/
#define AB3100_EVENTA1_ONSWA (0x01<<16)
#define AB3100_EVENTA1_ONSWB (0x02<<16)
#define AB3100_EVENTA1_ONSWC (0x04<<16)
#define AB3100_EVENTA1_DCIO (0x08<<16)
#define AB3100_EVENTA1_OVER_TEMP (0x10<<16)
#define AB3100_EVENTA1_SIM_OFF (0x20<<16)
#define AB3100_EVENTA1_VBUS (0x40<<16)
#define AB3100_EVENTA1_VSET_USB (0x80<<16)
#define AB3100_EVENTA2_READY_TX (0x01<<8)
#define AB3100_EVENTA2_READY_RX (0x02<<8)
#define AB3100_EVENTA2_OVERRUN_ERROR (0x04<<8)
#define AB3100_EVENTA2_FRAMING_ERROR (0x08<<8)
#define AB3100_EVENTA2_CHARG_OVERCURRENT (0x10<<8)
#define AB3100_EVENTA2_MIDR (0x20<<8)
#define AB3100_EVENTA2_BATTERY_REM (0x40<<8)
#define AB3100_EVENTA2_ALARM (0x80<<8)
#define AB3100_EVENTA3_ADC_TRIG5 (0x01)
#define AB3100_EVENTA3_ADC_TRIG4 (0x02)
#define AB3100_EVENTA3_ADC_TRIG3 (0x04)
#define AB3100_EVENTA3_ADC_TRIG2 (0x08)
#define AB3100_EVENTA3_ADC_TRIGVBAT (0x10)
#define AB3100_EVENTA3_ADC_TRIGVTX (0x20)
#define AB3100_EVENTA3_ADC_TRIG1 (0x40)
#define AB3100_EVENTA3_ADC_TRIG0 (0x80)
/* AB3100, STR register flags */
#define AB3100_STR_ONSWA (0x01)
#define AB3100_STR_ONSWB (0x02)
#define AB3100_STR_ONSWC (0x04)
#define AB3100_STR_DCIO (0x08)
#define AB3100_STR_BOOT_MODE (0x10)
#define AB3100_STR_SIM_OFF (0x20)
#define AB3100_STR_BATT_REMOVAL (0x40)
#define AB3100_STR_VBUS (0x80)
/*
* AB3100 contains 8 regulators, one external regulator controller
* and a buck converter, further the LDO E and buck converter can
* have separate settings if they are in sleep mode, this is
* modeled as a separate regulator.
*/
#define AB3100_NUM_REGULATORS 10
/**
* struct ab3100
* @access_mutex: lock out concurrent accesses to the AB3100 registers
* @dev: pointer to the containing device
* @i2c_client: I2C client for this chip
* @testreg_client: secondary client for test registers
* @chip_name: name of this chip variant
* @chip_id: 8 bit chip ID for this chip variant
* @event_subscribers: event subscribers are listed here
* @startup_events: a copy of the first reading of the event registers
* @startup_events_read: whether the first events have been read
*
* This struct is PRIVATE and devices using it should NOT
* access ANY fields. It is used as a token for calling the
* AB3100 functions.
*/
struct ab3100 {
struct mutex access_mutex;
struct device *dev;
struct i2c_client *i2c_client;
struct i2c_client *testreg_client;
char chip_name[32];
u8 chip_id;
struct blocking_notifier_head event_subscribers;
u8 startup_events[3];
bool startup_events_read;
};
/**
* struct ab3100_platform_data
* Data supplied to initialize board connections to the AB3100
* @reg_constraints: regulator constraints for target board
* the order of these constraints are: LDO A, C, D, E,
* F, G, H, K, EXT and BUCK.
* @reg_initvals: initial values for the regulator registers
* plus two sleep settings for LDO E and the BUCK converter.
* exactly AB3100_NUM_REGULATORS+2 values must be sent in.
* Order: LDO A, C, E, E sleep, F, G, H, K, EXT, BUCK,
* BUCK sleep, LDO D. (LDO D need to be initialized last.)
* @external_voltage: voltage level of the external regulator.
*/
struct ab3100_platform_data {
struct regulator_init_data reg_constraints[AB3100_NUM_REGULATORS];
u8 reg_initvals[AB3100_NUM_REGULATORS+2];
int external_voltage;
};
int ab3100_event_register(struct ab3100 *ab3100,
struct notifier_block *nb);
int ab3100_event_unregister(struct ab3100 *ab3100,
struct notifier_block *nb);
#endif /* MFD_AB3100_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7