libata: use ata_is_ncq() accessors

Use accessor functions instead of the raw value.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tejun Heo <tj@kernel.org>

drivers/ata/libahci.c

@@ -1975,7 +1975,7 @@ unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
 	 */
 	pp->active_link = qc->dev->link;
 
-	if (qc->tf.protocol == ATA_PROT_NCQ)
+	if (ata_is_ncq(qc->tf.protocol))
 		writel(1 << qc->tag, port_mmio + PORT_SCR_ACT);
 
 	if (pp->fbs_enabled && pp->fbs_last_dev != qc->dev->link->pmp) {

drivers/ata/libata-core.c

@@ -4842,7 +4842,7 @@ int ata_std_qc_defer(struct ata_queued_cmd *qc)
 {
 	struct ata_link *link = qc->dev->link;
 
-	if (qc->tf.protocol == ATA_PROT_NCQ) {
+	if (ata_is_ncq(qc->tf.protocol)) {
 		if (!ata_tag_valid(link->active_tag))
 			return 0;
 	} else {
@@ -5007,7 +5007,7 @@ void __ata_qc_complete(struct ata_queued_cmd *qc)
 		ata_sg_clean(qc);
 
 	/* command should be marked inactive atomically with qc completion */
-	if (qc->tf.protocol == ATA_PROT_NCQ) {
+	if (ata_is_ncq(qc->tf.protocol)) {
 		link->sactive &= ~(1 << qc->tag);
 		if (!link->sactive)
 			ap->nr_active_links--;

drivers/ata/libata-scsi.c

@@ -3130,8 +3130,8 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc)
 		tf->command = cdb[9];
 	}
 
-	/* For NCQ commands with FPDMA protocol, copy the tag value */
-	if (tf->protocol == ATA_PROT_NCQ)
+	/* For NCQ commands copy the tag value */
+	if (ata_is_ncq(tf->protocol))
 		tf->nsect = qc->tag << 3;
 
 	/* enforce correct master/slave bit */