Merge remote-tracking branch 'regmap/topic/irq' into regmap-next

drivers/base/regmap/regmap-irq.c

@@ -418,6 +418,31 @@ int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
 				reg, ret);
 			goto err_alloc;
 		}
+
+		if (!chip->init_ack_masked)
+			continue;
+
+		/* Ack masked but set interrupts */
+		reg = chip->status_base +
+			(i * map->reg_stride * d->irq_reg_stride);
+		ret = regmap_read(map, reg, &d->status_buf[i]);
+		if (ret != 0) {
+			dev_err(map->dev, "Failed to read IRQ status: %d\n",
+				ret);
+			goto err_alloc;
+		}
+
+		if (d->status_buf[i] && chip->ack_base) {
+			reg = chip->ack_base +
+				(i * map->reg_stride * d->irq_reg_stride);
+			ret = regmap_write(map, reg,
+					d->status_buf[i] & d->mask_buf[i]);
+			if (ret != 0) {
+				dev_err(map->dev, "Failed to ack 0x%x: %d\n",
+					reg, ret);
+				goto err_alloc;
+			}
+		}
 	}
 
 	/* Wake is disabled by default */

include/linux/regmap.h

@@ -471,6 +471,9 @@ struct regmap_irq {
  * @ack_base:    Base ack address.  If zero then the chip is clear on read.
  * @wake_base:   Base address for wake enables.  If zero unsupported.
  * @irq_reg_stride:  Stride to use for chips where registers are not contiguous.
+ * @init_ack_masked: Ack all masked interrupts once during initalization.
+ * @mask_invert: Inverted mask register: cleared bits are masked out.
+ * @wake_invert: Inverted wake register: cleared bits are wake enabled.
  * @runtime_pm:  Hold a runtime PM lock on the device when accessing it.
  *
  * @num_regs:    Number of registers in each control bank.
@@ -486,9 +489,10 @@ struct regmap_irq_chip {
 	unsigned int ack_base;
 	unsigned int wake_base;
 	unsigned int irq_reg_stride;
-	unsigned int mask_invert;
-	unsigned int wake_invert;
-	bool runtime_pm;
+	bool init_ack_masked:1;
+	bool mask_invert:1;
+	bool wake_invert:1;
+	bool runtime_pm:1;
 
 	int num_regs;