platform/x86: intel_scu_wdt: Move driver from arch/x86

The ACPI-enabled Intel MID platforms neither have WDAT table nor proper IDs
to instantiate watchdog device. In order to keep them working move the board
code from arch/x86 to drivers/platform/x86.

Note, the complete SFI support is going to be removed, that's why PDx86
has been chosen as a new home for it. This is the only device which needs
additional code so far.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

arch/x86/platform/intel-mid/device_libs/Makefile

@@ -30,4 +30,3 @@ obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_tca6416.o
 obj-$(subst m,y,$(CONFIG_KEYBOARD_GPIO)) += platform_gpio_keys.o
 obj-$(subst m,y,$(CONFIG_INTEL_MID_POWER_BUTTON)) += platform_mrfld_power_btn.o
 obj-$(subst m,y,$(CONFIG_RTC_DRV_CMOS)) += platform_mrfld_rtc.o
-obj-$(subst m,y,$(CONFIG_INTEL_MID_WATCHDOG)) += platform_mrfld_wdt.o

drivers/platform/x86/Kconfig

@@ -1424,6 +1424,14 @@ config INTEL_SCU_PLATFORM
 	  and SCU (sometimes called PMC as well). The driver currently
 	  supports Intel Elkhart Lake and compatible platforms.
 
+config INTEL_SCU_WDT
+	bool
+	default INTEL_SCU_PCI
+	depends on INTEL_MID_WATCHDOG
+	help
+	  This is a specific platform code to instantiate watchdog device
+	  on ACPI-based Intel MID platforms.
+
 config INTEL_SCU_IPC_UTIL
 	tristate "Intel SCU IPC utility driver"
 	depends on INTEL_SCU

drivers/platform/x86/Makefile

@@ -146,6 +146,7 @@ obj-$(CONFIG_INTEL_PUNIT_IPC)		+= intel_punit_ipc.o
 obj-$(CONFIG_INTEL_SCU_IPC)		+= intel_scu_ipc.o
 obj-$(CONFIG_INTEL_SCU_PCI)		+= intel_scu_pcidrv.o
 obj-$(CONFIG_INTEL_SCU_PLATFORM)	+= intel_scu_pltdrv.o
+obj-$(CONFIG_INTEL_SCU_WDT)		+= intel_scu_wdt.o
 obj-$(CONFIG_INTEL_SCU_IPC_UTIL)	+= intel_scu_ipcutil.o
 obj-$(CONFIG_INTEL_TELEMETRY)		+= intel_telemetry_core.o \
 					   intel_telemetry_pltdrv.o \