Commit 1846ac3d authored by Nick Kossifidis's avatar Nick Kossifidis Committed by John W. Linville

ath5k: Use usleep_range where possible

Use usleep_range where possible to reduce busy waits
Signed-off-by: default avatarNick Kossifidis <mickflemm@gmail.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent ce169aca
......@@ -298,7 +298,7 @@ int ath5k_hw_init(struct ath5k_hw *ah)
/* Reset SERDES to load new settings */
ath5k_hw_reg_write(ah, 0x00000000, AR5K_PCIE_SERDES_RESET);
mdelay(1);
usleep_range(1000, 1500);
}
/* Get misc capabilities */
......
......@@ -98,7 +98,7 @@ ath5k_pci_eeprom_read(struct ath_common *common, u32 offset, u16 *data)
0xffff);
return true;
}
udelay(15);
usleep_range(15, 20);
}
return false;
......
......@@ -58,7 +58,7 @@ u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, enum ieee80211_band band)
return 0;
}
mdelay(2);
usleep_range(2000, 2500);
/* ...wait until PHY is ready and read the selected radio revision */
ath5k_hw_reg_write(ah, 0x00001c16, AR5K_PHY(0x34));
......@@ -308,9 +308,9 @@ static void ath5k_hw_wait_for_synth(struct ath5k_hw *ah,
delay = delay << 2;
/* XXX: /2 on turbo ? Let's be safe
* for now */
udelay(100 + delay);
usleep_range(100 + delay, 100 + (2 * delay));
} else {
mdelay(1);
usleep_range(1000, 1500);
}
}
......@@ -1083,7 +1083,7 @@ static int ath5k_hw_rf5110_channel(struct ath5k_hw *ah,
data = ath5k_hw_rf5110_chan2athchan(channel);
ath5k_hw_reg_write(ah, data, AR5K_RF_BUFFER);
ath5k_hw_reg_write(ah, 0, AR5K_RF_BUFFER_CONTROL_0);
mdelay(1);
usleep_range(1000, 1500);
return 0;
}
......@@ -1454,7 +1454,7 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah,
beacon = ath5k_hw_reg_read(ah, AR5K_BEACON_5210);
ath5k_hw_reg_write(ah, beacon & ~AR5K_BEACON_ENABLE, AR5K_BEACON_5210);
mdelay(2);
usleep_range(2000, 2500);
/*
* Set the channel (with AGC turned off)
......@@ -1467,7 +1467,7 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah,
* Activate PHY and wait
*/
ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT);
mdelay(1);
usleep_range(1000, 1500);
AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE);
......@@ -1504,7 +1504,7 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah,
ath5k_hw_reg_write(ah, AR5K_PHY_RFSTG_DISABLE, AR5K_PHY_RFSTG);
AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE);
mdelay(1);
usleep_range(1000, 1500);
/*
* Enable calibration and wait until completion
......@@ -3397,7 +3397,7 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
if (ret)
return ret;
mdelay(1);
usleep_range(1000, 1500);
/*
* Write RF buffer
......@@ -3418,10 +3418,10 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
}
} else if (ah->ah_version == AR5K_AR5210) {
mdelay(1);
usleep_range(1000, 1500);
/* Disable phy and wait */
ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT);
mdelay(1);
usleep_range(1000, 1500);
}
/* Set channel on PHY */
......@@ -3447,7 +3447,7 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
for (i = 0; i <= 20; i++) {
if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10))
break;
udelay(200);
usleep_range(200, 250);
}
ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1);
......
......@@ -357,7 +357,7 @@ static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val)
ath5k_hw_reg_write(ah, val, AR5K_RESET_CTL);
/* Wait at least 128 PCI clocks */
udelay(15);
usleep_range(15, 20);
if (ah->ah_version == AR5K_AR5210) {
val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA
......@@ -422,7 +422,7 @@ static int ath5k_hw_wisoc_reset(struct ath5k_hw *ah, u32 flags)
regval = __raw_readl(reg);
__raw_writel(regval | val, reg);
regval = __raw_readl(reg);
udelay(100);
usleep_range(100, 150);
/* Bring BB/MAC out of reset */
__raw_writel(regval & ~val, reg);
......@@ -493,7 +493,7 @@ static int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode,
ath5k_hw_reg_write(ah, data | AR5K_SLEEP_CTL_SLE_WAKE,
AR5K_SLEEP_CTL);
udelay(15);
usleep_range(15, 20);
for (i = 200; i > 0; i--) {
/* Check if the chip did wake up */
......@@ -502,7 +502,7 @@ static int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode,
break;
/* Wait a bit and retry */
udelay(50);
usleep_range(50, 75);
ath5k_hw_reg_write(ah, data | AR5K_SLEEP_CTL_SLE_WAKE,
AR5K_SLEEP_CTL);
}
......@@ -563,7 +563,7 @@ int ath5k_hw_on_hold(struct ath5k_hw *ah)
ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA |
AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI);
mdelay(2);
usleep_range(2000, 2500);
} else {
ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
AR5K_RESET_CTL_BASEBAND | bus_flags);
......@@ -621,7 +621,7 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel)
ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA |
AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI);
mdelay(2);
usleep_range(2000, 2500);
} else {
if (ath5k_get_bus_type(ah) == ATH_AHB)
ret = ath5k_hw_wisoc_reset(ah, AR5K_RESET_CTL_PCU |
......@@ -739,7 +739,7 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel)
/* ...update PLL if needed */
if (ath5k_hw_reg_read(ah, AR5K_PHY_PLL) != clock) {
ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL);
udelay(300);
usleep_range(300, 350);
}
/* ...set the PHY operating mode */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment