memory: renesas-rpc-if: Avoid unaligned bus access for HyperFlash
HyperFlash devices in Renesas SoCs use 2-bytes addressing, according to HW manual paragraph 62.3.3 (which officially describes Serial Flash access, but seems to be applicable to HyperFlash too). And 1-byte bus read operations to 2-bytes unaligned addresses in external address space read mode work incorrectly (returns the other byte from the same word). Function memcpy_fromio(), used by the driver to read data from the bus, in ARM64 architecture (to which Renesas cores belong) uses 8-bytes bus accesses for appropriate aligned addresses, and 1-bytes accesses for other addresses. This results in incorrect data read from HyperFlash in unaligned cases. This issue can be reproduced using something like the following commands (where mtd1 is a parition on Hyperflash storage, defined properly in a device tree): [Correct fragment, read from Hyperflash] root@rcar-gen3:~# dd if=/dev/mtd1 of=/tmp/zz bs=32 count=1 root@rcar-gen3:~# hexdump -C /tmp/zz 00000000 f4 03 00 aa f5 03 01 aa f6 03 02 aa f7 03 03 aa |................| 00000010 00 00 80 d2 40 20 18 d5 00 06 81 d2 a0 18 a6 f2 |....@ ..........| 00000020 [Incorrect read of the same fragment: see the difference at offsets 8-11] root@rcar-gen3:~# dd if=/dev/mtd1 of=/tmp/zz bs=12 count=1 root@rcar-gen3:~# hexdump -C /tmp/zz 00000000 f4 03 00 aa f5 03 01 aa 03 03 aa aa |............| 0000000c Fix this issue by creating a local replacement of the copying function, that performs only properly aligned bus accesses, and is used for reading from HyperFlash. Fixes: ca7d8b98 ("memory: add Renesas RPC-IF driver") Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Link: https://lore.kernel.org/r/20210922184830.29147-1-andrew_gabbasov@mentor.comSigned-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Showing
Please register or sign in to comment