[PATCH] cciss: version update, new hw

Add support for new hardware and bumps the version to 3.6.10.  It seems
there were several changes introduced including soft_irq.  I decided to
bump the major number to reflect these changes.  Since we're still
supporting older vendor kernels I need some way differentiate between
kernel versions <=2.6.10 and newer kernels >=2.6.16.
Signed-off-by: Mike Miller <mike.miller@hp.com>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Documentation/cciss.txt

@@ -20,6 +20,7 @@ This driver is known to work with the following cards:
 	* SA P400i
 	* SA E200
 	* SA E200i
+	* SA E500
 
 If nodes are not already created in the /dev/cciss directory, run as root:
 

drivers/block/cciss.c

@@ -48,14 +48,14 @@
 #include <linux/completion.h>
 
 #define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin))
-#define DRIVER_NAME "HP CISS Driver (v 2.6.10)"
-#define DRIVER_VERSION CCISS_DRIVER_VERSION(2,6,10)
+#define DRIVER_NAME "HP CISS Driver (v 3.6.10)"
+#define DRIVER_VERSION CCISS_DRIVER_VERSION(3,6,10)
 
 /* Embedded module documentation macros - see modules.h */
 MODULE_AUTHOR("Hewlett-Packard Company");
-MODULE_DESCRIPTION("Driver for HP Controller SA5xxx SA6xxx version 2.6.10");
+MODULE_DESCRIPTION("Driver for HP Controller SA5xxx SA6xxx version 3.6.10");
 MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400"
-			" SA6i P600 P800 P400 P400i E200 E200i");
+			" SA6i P600 P800 P400 P400i E200 E200i E500");
 MODULE_LICENSE("GPL");
 
 #include "cciss_cmd.h"
@@ -82,6 +82,7 @@ static const struct pci_device_id cciss_pci_device_id[] = {
 	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSD,     0x103C, 0x3213},
 	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSD,     0x103C, 0x3214},
 	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSD,     0x103C, 0x3215},
+	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSC,     0x103C, 0x3233},
 	{0,}
 };
 
@@ -110,6 +111,7 @@ static struct board_type products[] = {
 	{0x3213103C, "Smart Array E200i", &SA5_access},
 	{0x3214103C, "Smart Array E200i", &SA5_access},
 	{0x3215103C, "Smart Array E200i", &SA5_access},
+	{0x3233103C, "Smart Array E500", &SA5_access},
 };
 
 /* How long to wait (in milliseconds) for board to go into simple mode */