Commit 18e2b504 authored by Uwe Kleine-König's avatar Uwe Kleine-König Committed by Shawn Guo

ARM: dts: imx25-pinfunc: more defines

Add some defines currently missing, fix ordering to make the list
sorted by (mux_reg, mux_val), make sure pins are grouped by mux_reg.

The same definitions are missing from the old pinmux header
(arch/arm/mach-imx/iomux-mx25.h) but as only legacy machine support uses
that and therefor the existing list is obviously good enough I didn't
spend the effort to add the corresponding definitions there, too.
Signed-off-by: default avatarUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
parent 54a6bcb8
......@@ -17,48 +17,69 @@
* <mux_reg conf_reg input_reg mux_mode input_val>
*/
#define MX25_PAD_TDO__TDO 0x000 0x3e8 0x000 0x00 0x000
#define MX25_PAD_A10__A10 0x008 0x000 0x000 0x00 0x000
#define MX25_PAD_A10__GPIO_4_0 0x008 0x000 0x000 0x05 0x000
#define MX25_PAD_A13__A13 0x00c 0x22C 0x000 0x00 0x000
#define MX25_PAD_A13__GPIO_4_1 0x00c 0x22C 0x000 0x05 0x000
#define MX25_PAD_A13__LCDC_CLS 0x00c 0x22C 0x000 0x07 0x000
#define MX25_PAD_A14__A14 0x010 0x230 0x000 0x10 0x000
#define MX25_PAD_A14__GPIO_2_0 0x010 0x230 0x000 0x15 0x000
#define MX25_PAD_A14__SIM1_CLK1 0x010 0x230 0x000 0x16 0x000
#define MX25_PAD_A14__LCDC_SPL 0x010 0x230 0x000 0x17 0x000
#define MX25_PAD_A15__A15 0x014 0x234 0x000 0x10 0x000
#define MX25_PAD_A15__GPIO_2_1 0x014 0x234 0x000 0x15 0x000
#define MX25_PAD_A15__SIM1_RST1 0x014 0x234 0x000 0x16 0x000
#define MX25_PAD_A15__LCDC_PS 0x014 0x234 0x000 0x17 0x000
#define MX25_PAD_A16__A16 0x018 0x000 0x000 0x10 0x000
#define MX25_PAD_A16__GPIO_2_2 0x018 0x000 0x000 0x15 0x000
#define MX25_PAD_A16__SIM1_VEN1 0x018 0x000 0x000 0x16 0x000
#define MX25_PAD_A16__LCDC_REV 0x018 0x000 0x000 0x17 0x000
#define MX25_PAD_A17__A17 0x01c 0x238 0x000 0x10 0x000
#define MX25_PAD_A17__GPIO_2_3 0x01c 0x238 0x000 0x15 0x000
#define MX25_PAD_A17__SIM1_TX 0x01c 0x238 0x554 0x16 0x000
#define MX25_PAD_A17__FEC_TX_ERR 0x01c 0x238 0x000 0x17 0x000
#define MX25_PAD_A18__A18 0x020 0x23c 0x000 0x10 0x000
#define MX25_PAD_A18__GPIO_2_4 0x020 0x23c 0x000 0x15 0x000
#define MX25_PAD_A18__SIM1_PD1 0x020 0x23c 0x550 0x16 0x000
#define MX25_PAD_A18__FEC_COL 0x020 0x23c 0x504 0x17 0x000
#define MX25_PAD_A19__A19 0x024 0x240 0x000 0x10 0x000
#define MX25_PAD_A19__FEC_RX_ERR 0x024 0x240 0x518 0x17 0x000
#define MX25_PAD_A19__GPIO_2_5 0x024 0x240 0x000 0x15 0x000
#define MX25_PAD_A19__SIM1_RX1 0x024 0x240 0x54c 0x16 0x000
#define MX25_PAD_A19__FEC_RX_ERR 0x024 0x240 0x518 0x17 0x000
#define MX25_PAD_A20__A20 0x028 0x244 0x000 0x10 0x000
#define MX25_PAD_A20__GPIO_2_6 0x028 0x244 0x000 0x15 0x000
#define MX25_PAD_A20__SIM2_CLK1 0x028 0x244 0x000 0x16 0x000
#define MX25_PAD_A20__FEC_RDATA2 0x028 0x244 0x50c 0x17 0x000
#define MX25_PAD_A21__A21 0x02c 0x248 0x000 0x10 0x000
#define MX25_PAD_A21__GPIO_2_7 0x02c 0x248 0x000 0x15 0x000
#define MX25_PAD_A21__SIM2_RST1 0x02c 0x248 0x000 0x16 0x000
#define MX25_PAD_A21__FEC_RDATA3 0x02c 0x248 0x510 0x17 0x000
#define MX25_PAD_A22__A22 0x030 0x000 0x000 0x10 0x000
#define MX25_PAD_A22__GPIO_2_8 0x030 0x000 0x000 0x15 0x000
#define MX25_PAD_A22__FEC_TDATA2 0x030 0x000 0x000 0x17 0x000
#define MX25_PAD_A22__SIM2_VEN1 0x030 0x000 0x000 0x16 0x000
#define MX25_PAD_A22__FEC_TDATA2 0x030 0x000 0x000 0x17 0x000
#define MX25_PAD_A23__A23 0x034 0x24c 0x000 0x10 0x000
#define MX25_PAD_A23__GPIO_2_9 0x034 0x24c 0x000 0x15 0x000
#define MX25_PAD_A23__SIM2_TX1 0x034 0x24c 0x560 0x16 0x000
#define MX25_PAD_A23__FEC_TDATA3 0x034 0x24c 0x000 0x17 0x000
#define MX25_PAD_A24__A24 0x038 0x250 0x000 0x10 0x000
#define MX25_PAD_A24__GPIO_2_10 0x038 0x250 0x000 0x15 0x000
#define MX25_PAD_A24__SIM2_PD1 0x038 0x250 0x55c 0x16 0x000
#define MX25_PAD_A24__FEC_RX_CLK 0x038 0x250 0x514 0x17 0x000
#define MX25_PAD_A25__A25 0x03c 0x254 0x000 0x10 0x000
......@@ -369,8 +390,8 @@
#define MX25_PAD_UART2_RTS__CC1 0x188 0x380 0x000 0x13 0x000
#define MX25_PAD_UART2_RTS__GPIO_4_28 0x188 0x380 0x000 0x15 0x000
#define MX25_PAD_UART2_CTS__FEC_RX_ERR 0x18c 0x384 0x518 0x12 0x002
#define MX25_PAD_UART2_CTS__UART2_CTS 0x18c 0x384 0x000 0x10 0x000
#define MX25_PAD_UART2_CTS__FEC_RX_ERR 0x18c 0x384 0x518 0x12 0x002
#define MX25_PAD_UART2_CTS__GPIO_4_29 0x18c 0x384 0x000 0x15 0x000
#define MX25_PAD_SD1_CMD__SD1_CMD 0x190 0x388 0x000 0x10 0x000
......@@ -471,20 +492,22 @@
#define MX25_PAD_DE_B__DE_B 0x1f0 0x3ec 0x000 0x10 0x000
#define MX25_PAD_DE_B__GPIO_2_20 0x1f0 0x3ec 0x000 0x15 0x000
#define MX25_PAD_TDO__TDO 0x000 0x3e8 0x000 0x00 0x000
#define MX25_PAD_GPIO_A__GPIO_A 0x1f4 0x3f0 0x000 0x10 0x000
#define MX25_PAD_GPIO_A__CAN1_TX 0x1f4 0x3f0 0x000 0x16 0x000
#define MX25_PAD_GPIO_A__USBOTG_PWR 0x1f4 0x3f0 0x000 0x12 0x000
#define MX25_PAD_GPIO_B__GPIO_B 0x1f8 0x3f4 0x000 0x10 0x000
#define MX25_PAD_GPIO_B__CAN1_RX 0x1f8 0x3f4 0x480 0x16 0x001
#define MX25_PAD_GPIO_B__USBOTG_OC 0x1f8 0x3f4 0x57c 0x12 0x001
#define MX25_PAD_GPIO_B__CAN1_RX 0x1f8 0x3f4 0x480 0x16 0x001
#define MX25_PAD_GPIO_C__GPIO_C 0x1fc 0x3f8 0x000 0x10 0x000
#define MX25_PAD_GPIO_C__PWM4_PWMO 0x1fc 0x3f8 0x000 0x11 0x000
#define MX25_PAD_GPIO_C__I2C2_SCL 0x1fc 0x3f8 0x51c 0x12 0x001
#define MX25_PAD_GPIO_C__KPP_COL4 0x1fc 0x3f8 0x52c 0x13 0x001
#define MX25_PAD_GPIO_C__CAN2_TX 0x1fc 0x3f8 0x000 0x16 0x000
#define MX25_PAD_GPIO_D__GPIO_D 0x200 0x3fc 0x000 0x10 0x000
#define MX25_PAD_GPIO_D__I2C2_SDA 0x200 0x3fc 0x520 0x12 0x001
#define MX25_PAD_GPIO_D__CAN2_RX 0x200 0x3fc 0x484 0x16 0x001
#define MX25_PAD_GPIO_E__GPIO_E 0x204 0x400 0x000 0x10 0x000
......@@ -505,6 +528,7 @@
#define MX25_PAD_VSTBY_REQ__VSTBY_REQ 0x214 0x408 0x000 0x10 0x000
#define MX25_PAD_VSTBY_REQ__AUD7_TXFS 0x214 0x408 0x000 0x14 0x000
#define MX25_PAD_VSTBY_REQ__GPIO_3_17 0x214 0x408 0x000 0x15 0x000
#define MX25_PAD_VSTBY_ACK__VSTBY_ACK 0x218 0x40c 0x000 0x10 0x000
#define MX25_PAD_VSTBY_ACK__GPIO_3_18 0x218 0x40c 0x000 0x15 0x000
......@@ -517,6 +541,7 @@
#define MX25_PAD_BOOT_MODE0__BOOT_MODE0 0x224 0x000 0x000 0x00 0x000
#define MX25_PAD_BOOT_MODE0__GPIO_4_30 0x224 0x000 0x000 0x05 0x000
#define MX25_PAD_BOOT_MODE1__BOOT_MODE1 0x228 0x000 0x000 0x00 0x000
#define MX25_PAD_BOOT_MODE1__GPIO_4_31 0x228 0x000 0x000 0x05 0x000
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment