ath9k: refactor ar9003_hw_spur_mitigate_ofdm

Similar to ar9003_hw_spur_mitigate_mrc_cck, simplify the code by using
ar9003_get_spur_chan_ptr. This may also be required for QCN550x support,
to provide an abstraction over the underlying EEPROM format.
Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220320233010.123106-6-wlooi@ucalgary.ca

drivers/net/wireless/ath/ath9k/ar9003_phy.c

@@ -523,21 +523,10 @@ static void ar9003_hw_spur_mitigate_ofdm(struct ath_hw *ah,
 	int synth_freq;
 	int range = 10;
 	int freq_offset = 0;
-	int mode;
-	u8* spurChansPtr;
+	u8 *spur_fbin_ptr = ar9003_get_spur_chan_ptr(ah, IS_CHAN_2GHZ(chan));
 	unsigned int i;
-	struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
 
-	if (IS_CHAN_5GHZ(chan)) {
-		spurChansPtr = &(eep->modalHeader5G.spurChans[0]);
-		mode = 0;
-	}
-	else {
-		spurChansPtr = &(eep->modalHeader2G.spurChans[0]);
-		mode = 1;
-	}
-
-	if (spurChansPtr[0] == 0)
+	if (spur_fbin_ptr[0] == 0)
 		return; /* No spur in the mode */
 
 	if (IS_CHAN_HT40(chan)) {
@@ -554,16 +543,18 @@ static void ar9003_hw_spur_mitigate_ofdm(struct ath_hw *ah,
 
 	ar9003_hw_spur_ofdm_clear(ah);
 
-	for (i = 0; i < AR_EEPROM_MODAL_SPURS && spurChansPtr[i]; i++) {
-		freq_offset = ath9k_hw_fbin2freq(spurChansPtr[i], mode);
+	for (i = 0; i < AR_EEPROM_MODAL_SPURS && spur_fbin_ptr[i]; i++) {
+		freq_offset = ath9k_hw_fbin2freq(spur_fbin_ptr[i],
+						 IS_CHAN_2GHZ(chan));
 		freq_offset -= synth_freq;
 		if (abs(freq_offset) < range) {
 			ar9003_hw_spur_ofdm_work(ah, chan, freq_offset,
 						 range, synth_freq);
 
 			if (AR_SREV_9565(ah) && (i < 4)) {
-				freq_offset = ath9k_hw_fbin2freq(spurChansPtr[i + 1],
-								 mode);
+				freq_offset =
+					ath9k_hw_fbin2freq(spur_fbin_ptr[i + 1],
+							   IS_CHAN_2GHZ(chan));
 				freq_offset -= synth_freq;
 				if (abs(freq_offset) < range)
 					ar9003_hw_spur_ofdm_9565(ah, freq_offset);