Commit 1937f5b9 authored by Russell King's avatar Russell King

ARM: fix sa1100 build

Fix:

arch/arm/mach-sa1100/generic.c:117: error: redefinition of 'cpufreq_get'
include/linux/cpufreq.h:299: error: previous definition of 'cpufreq_get' was here

cpufreq_get() is used on these platforms to tell drivers what the CPU
frequency is, and therefore the bus frequency - which is critical for
setting the PCMCIA and LCD timings.  Adding ifdefs to these drivers to
select cpufreq_get() or some other interface adds confusion.  Making
these drivers use some other interface for the normal paths and cpufreq
stuff for the cpufreq notifier is insane as well.

(Why x86 can't provide a version of cpufreq_get() which returns the
CPU frequency when CPUFREQ is disabled is beyond me, rather than
requiring a dummy zero-returning cpufreq_get().  Especially as they
do:

			unsigned long khz = cpufreq_get(cpu);
			if (!khz)
				khz = tsc_khz;

In other words, if CPUFREQ is disabled, get it from tsc_khz - why
not provide a dummy cpufreq_get() which returns tsc_khz?)
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent c7baab5d
......@@ -603,6 +603,7 @@ config ARCH_SA1100
select ARCH_SPARSEMEM_ENABLE
select ARCH_MTD_XIP
select ARCH_HAS_CPUFREQ
select CPU_FREQ
select GENERIC_GPIO
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
......@@ -1359,13 +1360,9 @@ source "drivers/cpufreq/Kconfig"
config CPU_FREQ_SA1100
bool
depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT)
default y
config CPU_FREQ_SA1110
bool
depends on CPU_FREQ && (SA1100_ASSABET || SA1100_CERF || SA1100_PT_SYSTEM3)
default y
config CPU_FREQ_INTEGRATOR
tristate "CPUfreq driver for ARM Integrator CPUs"
......
......@@ -4,6 +4,7 @@ menu "SA11x0 Implementations"
config SA1100_ASSABET
bool "Assabet"
select CPU_FREQ_SA1110
help
Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
Microprocessor Development Board (also known as the Assabet).
......@@ -19,6 +20,7 @@ config ASSABET_NEPONSET
config SA1100_CERF
bool "CerfBoard"
select CPU_FREQ_SA1110
help
The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued).
More information is available at:
......@@ -45,6 +47,7 @@ endchoice
config SA1100_COLLIE
bool "Sharp Zaurus SL5500"
# FIXME: select CPU_FREQ_SA11x0
select SHARP_LOCOMO
select SHARP_SCOOP
select SHARP_PARAM
......@@ -54,6 +57,7 @@ config SA1100_COLLIE
config SA1100_H3100
bool "Compaq iPAQ H3100"
select HTC_EGPIO
select CPU_FREQ_SA1100
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3100 handheld computer. Information about this machine and the
......@@ -64,6 +68,7 @@ config SA1100_H3100
config SA1100_H3600
bool "Compaq iPAQ H3600/H3700"
select HTC_EGPIO
select CPU_FREQ_SA1100
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3600 handheld computer. Information about this machine and the
......@@ -74,6 +79,7 @@ config SA1100_H3600
config SA1100_BADGE4
bool "HP Labs BadgePAD 4"
select SA1111
select CPU_FREQ_SA1100
help
Say Y here if you want to build a kernel for the HP Laboratories
BadgePAD 4.
......@@ -81,6 +87,7 @@ config SA1100_BADGE4
config SA1100_JORNADA720
bool "HP Jornada 720"
select SA1111
# FIXME: select CPU_FREQ_SA11x0
help
Say Y here if you want to build a kernel for the HP Jornada 720
handheld computer. See <http://www.hp.com/jornada/products/720>
......@@ -98,12 +105,14 @@ config SA1100_JORNADA720_SSP
config SA1100_HACKKIT
bool "HackKit Core CPU Board"
select CPU_FREQ_SA1100
help
Say Y here to support the HackKit Core CPU Board
<http://hackkit.eletztrick.de>;
config SA1100_LART
bool "LART"
select CPU_FREQ_SA1100
help
Say Y here if you are using the Linux Advanced Radio Terminal
(also known as the LART). See <http://www.lartmaker.nl/> for
......@@ -111,6 +120,7 @@ config SA1100_LART
config SA1100_PLEB
bool "PLEB"
select CPU_FREQ_SA1100
help
Say Y here if you are using version 1 of the Portable Linux
Embedded Board (also known as PLEB).
......@@ -119,6 +129,7 @@ config SA1100_PLEB
config SA1100_SHANNON
bool "Shannon"
select CPU_FREQ_SA1100
help
The Shannon (also known as a Tuxscreen, and also as a IS2630) was a
limited edition webphone produced by Philips. The Shannon is a SA1100
......@@ -127,6 +138,7 @@ config SA1100_SHANNON
config SA1100_SIMPAD
bool "Simpad"
select CPU_FREQ_SA1110
help
The SIEMENS webpad SIMpad is based on the StrongARM 1110. There
are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB
......@@ -145,3 +157,4 @@ config SA1100_SSP
endmenu
endif
......@@ -58,7 +58,6 @@ static const unsigned short cclk_frequency_100khz[NR_FREQS] = {
2802 /* 280.2 MHz */
};
#if defined(CONFIG_CPU_FREQ_SA1100) || defined(CONFIG_CPU_FREQ_SA1110)
/* rounds up(!) */
unsigned int sa11x0_freq_to_ppcr(unsigned int khz)
{
......@@ -110,17 +109,6 @@ unsigned int sa11x0_getspeed(unsigned int cpu)
return cclk_frequency_100khz[PPCR & 0xf] * 100;
}
#else
/*
* We still need to provide this so building without cpufreq works.
*/
unsigned int cpufreq_get(unsigned int cpu)
{
return cclk_frequency_100khz[PPCR & 0xf] * 100;
}
EXPORT_SYMBOL(cpufreq_get);
#endif
/*
* This is the SA11x0 sched_clock implementation. This has
* a resolution of 271ns, and a maximum value of 32025597s (370 days).
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment