Skip to content

L
linux
Commit 1940c25e authored by Abel Vesa's avatar Abel Vesa Committed by Bjorn Andersson
Browse files
Options

arm64: dts: qcom: x1e80100: Add display nodes 

Add the required nodes to support display on X1E80100.
Co-developed-by: default avatarSibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: default avatarSibi Sankar <quic_sibis@quicinc.com>
Co-developed-by: default avatarRajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: default avatarRajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: default avatarAbel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240129-x1e80100-dts-missing-nodes-v6-8-2c0e691cfa3b@linaro.orgSigned-off-by: default avatarBjorn Andersson <andersson@kernel.org>
parent 5eb83fc1
Show whitespace changes
Inline Side-by-side
Showing with 519 additions and 0 deletions
arch/arm64/boot/dts/qcom/x1e80100.dtsi
View file @ 1940c25e
......@@ -4,6 +4,7 @@
*/
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,x1e80100-dispcc.h>
#include <dt-bindings/clock/qcom,x1e80100-gcc.h>
#include <dt-bindings/clock/qcom,x1e80100-tcsr.h>
#include <dt-bindings/dma/qcom-gpi.h>
......@@ -3352,6 +3353,524 @@ usb_1_ss1_role_switch: endpoint {
};
};
mdss: display-subsystem@ae00000 {
compatible = "qcom,x1e80100-mdss";
reg = <0 0x0ae00000 0 0x1000>;
reg-names = "mdss";
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
<&gcc GCC_DISP_HF_AXI_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>;
resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
&gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
&config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
interconnect-names = "mdp0-mem",
"mdp1-mem",
"cpu-cfg";
power-domains = <&dispcc MDSS_GDSC>;
iommus = <&apps_smmu 0x1c00 0x2>;
interrupt-controller;
#interrupt-cells = <1>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
status = "disabled";
mdss_mdp: display-controller@ae01000 {
compatible = "qcom,x1e80100-dpu";
reg = <0 0x0ae01000 0 0x8f000>,
<0 0x0aeb0000 0 0x2008>;
reg-names = "mdp",
"vbif";
interrupts-extended = <&mdss 0>;
clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
<&dispcc DISP_CC_MDSS_AHB_CLK>,
<&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>,
<&dispcc DISP_CC_MDSS_VSYNC_CLK>;
clock-names = "nrt_bus",
"iface",
"lut",
"core",
"vsync";
operating-points-v2 = <&mdp_opp_table>;
power-domains = <&rpmhpd RPMHPD_MMCX>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
mdss_intf0_out: endpoint {
remote-endpoint = <&mdss_dp0_in>;
};
};
port@4 {
reg = <4>;
mdss_intf4_out: endpoint {
remote-endpoint = <&mdss_dp1_in>;
};
};
port@5 {
reg = <5>;
mdss_intf5_out: endpoint {
remote-endpoint = <&mdss_dp3_in>;
};
};
port@6 {
reg = <6>;
mdss_intf6_out: endpoint {
remote-endpoint = <&mdss_dp2_in>;
};
};
};
mdp_opp_table: opp-table {
compatible = "operating-points-v2";
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-325000000 {
opp-hz = /bits/ 64 <325000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-375000000 {
opp-hz = /bits/ 64 <375000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
opp-514000000 {
opp-hz = /bits/ 64 <514000000>;
required-opps = <&rpmhpd_opp_nom>;
};
opp-575000000 {
opp-hz = /bits/ 64 <575000000>;
required-opps = <&rpmhpd_opp_nom_l1>;
};
};
};
mdss_dp0: displayport-controller@ae90000 {
compatible = "qcom,x1e80100-dp";
reg = <0 0xae90000 0 0x200>,
<0 0xae90200 0 0x200>,
<0 0xae90400 0 0x600>,
<0 0xae91000 0 0x400>,
<0 0xae91400 0 0x400>;
interrupts-extended = <&mdss 12>;
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
<&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
<&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
<&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
<&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
clock-names = "core_iface",
"core_aux",
"ctrl_link",
"ctrl_link_iface",
"stream_pixel";
assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
<&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
assigned-clock-parents = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_LINK_CLK>,
<&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
operating-points-v2 = <&mdss_dp0_opp_table>;
power-domains = <&rpmhpd RPMHPD_MMCX>;
phys = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_PHY>;
phy-names = "dp";
#sound-dai-cells = <0>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
mdss_dp0_in: endpoint {
remote-endpoint = <&mdss_intf0_out>;
};
};
port@1 {
reg = <1>;
mdss_dp0_out: endpoint {
};
};
};
mdss_dp0_opp_table: opp-table {
compatible = "operating-points-v2";
opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-270000000 {
opp-hz = /bits/ 64 <270000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-540000000 {
opp-hz = /bits/ 64 <540000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
opp-810000000 {
opp-hz = /bits/ 64 <810000000>;
required-opps = <&rpmhpd_opp_nom>;
};
};
};
mdss_dp1: displayport-controller@ae98000 {
compatible = "qcom,x1e80100-dp";
reg = <0 0xae98000 0 0x200>,
<0 0xae98200 0 0x200>,
<0 0xae98400 0 0x600>,
<0 0xae99000 0 0x400>,
<0 0xae99400 0 0x400>;
interrupts-extended = <&mdss 13>;
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
<&dispcc DISP_CC_MDSS_DPTX1_AUX_CLK>,
<&dispcc DISP_CC_MDSS_DPTX1_LINK_CLK>,
<&dispcc DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
<&dispcc DISP_CC_MDSS_DPTX1_PIXEL0_CLK>;
clock-names = "core_iface",
"core_aux",
"ctrl_link",
"ctrl_link_iface",
"stream_pixel";
assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
<&dispcc DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>;
assigned-clock-parents = <&usb_1_ss1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
<&usb_1_ss1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
operating-points-v2 = <&mdss_dp1_opp_table>;
power-domains = <&rpmhpd RPMHPD_MMCX>;
phys = <&usb_1_ss1_qmpphy QMP_USB43DP_DP_PHY>;
phy-names = "dp";
#sound-dai-cells = <0>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
mdss_dp1_in: endpoint {
remote-endpoint = <&mdss_intf4_out>;
};
};
port@1 {
reg = <1>;
mdss_dp1_out: endpoint {
};
};
};
mdss_dp1_opp_table: opp-table {
compatible = "operating-points-v2";
opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-270000000 {
opp-hz = /bits/ 64 <270000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-540000000 {
opp-hz = /bits/ 64 <540000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
opp-810000000 {
opp-hz = /bits/ 64 <810000000>;
required-opps = <&rpmhpd_opp_nom>;
};
};
};
mdss_dp2: displayport-controller@ae9a000 {
compatible = "qcom,x1e80100-dp";
reg = <0 0xae9a000 0 0x200>,
<0 0xae9a200 0 0x200>,
<0 0xae9a400 0 0x600>,
<0 0xae9b000 0 0x400>,
<0 0xae9b400 0 0x400>;
interrupts-extended = <&mdss 14>;
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
<&dispcc DISP_CC_MDSS_DPTX2_AUX_CLK>,
<&dispcc DISP_CC_MDSS_DPTX2_LINK_CLK>,
<&dispcc DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>,
<&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK>;
clock-names = "core_iface",
"core_aux",
"ctrl_link",
"ctrl_link_iface",
"stream_pixel";
assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
<&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>;
assigned-clock-parents = <&mdss_dp2_phy 0>,
<&mdss_dp2_phy 1>;
operating-points-v2 = <&mdss_dp2_opp_table>;
power-domains = <&rpmhpd RPMHPD_MMCX>;
phys = <&mdss_dp2_phy>;
phy-names = "dp";
#sound-dai-cells = <0>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
mdss_dp2_in: endpoint {
remote-endpoint = <&mdss_intf6_out>;
};
};
port@1 {
reg = <1>;
};
};
mdss_dp2_opp_table: opp-table {
compatible = "operating-points-v2";
opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-270000000 {
opp-hz = /bits/ 64 <270000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-540000000 {
opp-hz = /bits/ 64 <540000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
opp-810000000 {
opp-hz = /bits/ 64 <810000000>;
required-opps = <&rpmhpd_opp_nom>;
};
};
};
mdss_dp3: displayport-controller@aea0000 {
compatible = "qcom,x1e80100-dp";
reg = <0 0xaea0000 0 0x200>,
<0 0xaea0200 0 0x200>,
<0 0xaea0400 0 0x600>,
<0 0xaea1000 0 0x400>,
<0 0xaea1400 0 0x400>;
interrupts-extended = <&mdss 15>;
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
<&dispcc DISP_CC_MDSS_DPTX3_AUX_CLK>,
<&dispcc DISP_CC_MDSS_DPTX3_LINK_CLK>,
<&dispcc DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>,
<&dispcc DISP_CC_MDSS_DPTX3_PIXEL0_CLK>;
clock-names = "core_iface",
"core_aux",
"ctrl_link",
"ctrl_link_iface",
"stream_pixel";
assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>,
<&dispcc DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>;
assigned-clock-parents = <&mdss_dp3_phy 0>,
<&mdss_dp3_phy 1>;
operating-points-v2 = <&mdss_dp3_opp_table>;
power-domains = <&rpmhpd RPMHPD_MMCX>;
phys = <&mdss_dp3_phy>;
phy-names = "dp";
#sound-dai-cells = <0>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
mdss_dp3_in: endpoint {
remote-endpoint = <&mdss_intf5_out>;
link-frequencies = /bits/ 64 <8100000000>;
};
};
port@1 {
reg = <1>;
};
};
mdss_dp3_opp_table: opp-table {
compatible = "operating-points-v2";
opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-270000000 {
opp-hz = /bits/ 64 <270000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-540000000 {
opp-hz = /bits/ 64 <540000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
opp-810000000 {
opp-hz = /bits/ 64 <810000000>;
required-opps = <&rpmhpd_opp_nom>;
};
};
};
};
mdss_dp2_phy: phy@aec2a00 {
compatible = "qcom,x1e80100-dp-phy";
reg = <0 0x0aec2a00 0 0x19c>,
<0 0x0aec2200 0 0xec>,
<0 0x0aec2600 0 0xec>,
<0 0x0aec2000 0 0x1c8>;
clocks = <&dispcc DISP_CC_MDSS_DPTX2_AUX_CLK>,
<&dispcc DISP_CC_MDSS_AHB_CLK>;
clock-names = "aux",
"cfg_ahb";
power-domains = <&rpmhpd RPMHPD_MX>;
#clock-cells = <1>;
#phy-cells = <0>;
status = "disabled";
};
mdss_dp3_phy: phy@aec5a00 {
compatible = "qcom,x1e80100-dp-phy";
reg = <0 0x0aec5a00 0 0x19c>,
<0 0x0aec5200 0 0xec>,
<0 0x0aec5600 0 0xec>,
<0 0x0aec5000 0 0x1c8>;
clocks = <&dispcc DISP_CC_MDSS_DPTX3_AUX_CLK>,
<&dispcc DISP_CC_MDSS_AHB_CLK>;
clock-names = "aux",
"cfg_ahb";
power-domains = <&rpmhpd RPMHPD_MX>;
#clock-cells = <1>;
#phy-cells = <0>;
status = "disabled";
};
dispcc: clock-controller@af00000 {
compatible = "qcom,x1e80100-dispcc";
reg = <0 0x0af00000 0 0x20000>;
clocks = <&bi_tcxo_div2>,
<&bi_tcxo_ao_div2>,
<&gcc GCC_DISP_AHB_CLK>,
<&sleep_clk>,
<0>, /* dsi0 */
<0>,
<0>, /* dsi1 */
<0>,
<&usb_1_ss0_qmpphy QMP_USB43DP_DP_LINK_CLK>, /* dp0 */
<&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
<&usb_1_ss1_qmpphy QMP_USB43DP_DP_LINK_CLK>, /* dp1 */
<&usb_1_ss1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
<&mdss_dp2_phy 0>, /* dp2 */
<&mdss_dp2_phy 1>,
<&mdss_dp3_phy 0>, /* dp3 */
<&mdss_dp3_phy 1>;
power-domains = <&rpmhpd RPMHPD_MMCX>;
required-opps = <&rpmhpd_opp_low_svs>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
};
pdc: interrupt-controller@b220000 {
compatible = "qcom,x1e80100-pdc", "qcom,pdc";
reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7