Commit 19998acb authored by Cyrille Pitchen's avatar Cyrille Pitchen Committed by Herbert Xu

crypto: atmel-sha - fix error management in atmel_sha_start()

This patch clarifies and fixes how errors should be handled by
atmel_sha_start().

For update operations, the previous code wrongly assumed that
(err != -EINPROGRESS) implies (err == 0). It's wrong because that doesn't
take the error cases (err < 0) into account.

This patch also adds many comments to detail all the possible returned
values and what should be done in each case.

Especially, when an error occurs, since atmel_sha_complete() has already
been called, hence releasing the hardware, atmel_sha_start() must not call
atmel_sha_finish_req() later otherwise atmel_sha_complete() would be
called a second time.
Signed-off-by: default avatarCyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
parent dd3f9f40
...@@ -1106,22 +1106,39 @@ static int atmel_sha_start(struct atmel_sha_dev *dd) ...@@ -1106,22 +1106,39 @@ static int atmel_sha_start(struct atmel_sha_dev *dd)
ctx->op, req->nbytes); ctx->op, req->nbytes);
err = atmel_sha_hw_init(dd); err = atmel_sha_hw_init(dd);
if (err) if (err)
goto err1; return atmel_sha_complete(dd, err);
/*
* atmel_sha_update_req() and atmel_sha_final_req() can return either:
* -EINPROGRESS: the hardware is busy and the SHA driver will resume
* its job later in the done_task.
* This is the main path.
*
* 0: the SHA driver can continue its job then release the hardware
* later, if needed, with atmel_sha_finish_req().
* This is the alternate path.
*
* < 0: an error has occurred so atmel_sha_complete(dd, err) has already
* been called, hence the hardware has been released.
* The SHA driver must stop its job without calling
* atmel_sha_finish_req(), otherwise atmel_sha_complete() would be
* called a second time.
*
* Please note that currently, atmel_sha_final_req() never returns 0.
*/
dd->resume = atmel_sha_done; dd->resume = atmel_sha_done;
if (ctx->op == SHA_OP_UPDATE) { if (ctx->op == SHA_OP_UPDATE) {
err = atmel_sha_update_req(dd); err = atmel_sha_update_req(dd);
if (err != -EINPROGRESS && (ctx->flags & SHA_FLAGS_FINUP)) if (!err && (ctx->flags & SHA_FLAGS_FINUP))
/* no final() after finup() */ /* no final() after finup() */
err = atmel_sha_final_req(dd); err = atmel_sha_final_req(dd);
} else if (ctx->op == SHA_OP_FINAL) { } else if (ctx->op == SHA_OP_FINAL) {
err = atmel_sha_final_req(dd); err = atmel_sha_final_req(dd);
} }
err1: if (!err)
if (err != -EINPROGRESS)
/* done_task will not finish it, so do it here */ /* done_task will not finish it, so do it here */
atmel_sha_finish_req(req, err); atmel_sha_finish_req(req, err);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment