ieee802154: change transmit power to s32

This patch change the transmit power from s8 to s32. This prepares to store a
mbm value instead dbm inside the transmit power variable. The old
interface keep the a s8 dbm value, which should be backward compatibility
when assign s8 to s32.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

drivers/net/ieee802154/at86rf230.c

@@ -1194,7 +1194,7 @@ at86rf230_set_hw_addr_filt(struct ieee802154_hw *hw,
 }
 
 static int
-at86rf230_set_txpower(struct ieee802154_hw *hw, s8 db)
+at86rf230_set_txpower(struct ieee802154_hw *hw, s32 db)
 {
 	struct at86rf230_local *lp = hw->priv;
 

include/net/cfg802154.h

@@ -85,7 +85,7 @@ struct wpan_phy {
 	u8 current_channel;
 	u8 current_page;
 	u32 channels_supported[IEEE802154_MAX_PAGE + 1];
-	s8 transmit_power;
+	s32 transmit_power;
 	struct wpan_phy_cca cca;
 
 	__le64 perm_extended_addr;

include/net/mac802154.h

@@ -213,7 +213,7 @@ struct ieee802154_ops {
 	int		(*set_hw_addr_filt)(struct ieee802154_hw *hw,
 					    struct ieee802154_hw_addr_filt *filt,
 					    unsigned long changed);
-	int		(*set_txpower)(struct ieee802154_hw *hw, s8 dbm);
+	int		(*set_txpower)(struct ieee802154_hw *hw, s32 dbm);
 	int		(*set_lbt)(struct ieee802154_hw *hw, bool on);
 	int		(*set_cca_mode)(struct ieee802154_hw *hw,
 					const struct wpan_phy_cca *cca);

net/ieee802154/nl802154.c

@@ -207,7 +207,7 @@ static const struct nla_policy nl802154_policy[NL802154_ATTR_MAX+1] = {
 	[NL802154_ATTR_PAGE] = { .type = NLA_U8, },
 	[NL802154_ATTR_CHANNEL] = { .type = NLA_U8, },
 
-	[NL802154_ATTR_TX_POWER] = { .type = NLA_S8, },
+	[NL802154_ATTR_TX_POWER] = { .type = NLA_S32, },
 
 	[NL802154_ATTR_CCA_MODE] = { .type = NLA_U32, },
 	[NL802154_ATTR_CCA_OPT] = { .type = NLA_U32, },
@@ -301,7 +301,7 @@ static int nl802154_send_wpan_phy(struct cfg802154_registered_device *rdev,
 			goto nla_put_failure;
 	}
 
-	if (nla_put_s8(msg, NL802154_ATTR_TX_POWER,
+	if (nla_put_s32(msg, NL802154_ATTR_TX_POWER,
 			rdev->wpan_phy.transmit_power))
 		goto nla_put_failure;
 

net/mac802154/driver-ops.h

@@ -58,7 +58,7 @@ drv_set_channel(struct ieee802154_local *local, u8 page, u8 channel)
 	return local->ops->set_channel(&local->hw, page, channel);
 }
 
-static inline int drv_set_tx_power(struct ieee802154_local *local, s8 dbm)
+static inline int drv_set_tx_power(struct ieee802154_local *local, s32 dbm)
 {
 	might_sleep();