Commit 1a795da7 authored by David S. Miller's avatar David S. Miller

Merge branch 'stmmac-Add-additional-EHL-PCI-info-and-PCI-ID'

Voon Weifeng says:

====================
stmmac: Add additional EHL PCI info and PCI ID

Thanks Jose Miguel Abreu for the feedback. Summary of v2 patches:

1/3: As suggested to keep the stmmac_pci.c file simple. So created a new
     file dwmac-intel.c and moved all the Intel specific PCI device out
     of stmmac_pci.c.

2/3: Added Intel(R) Programmable Services Engine (Intel(R) PSE) MAC PCI ID
     and PCI info

3/3: Added EHL 2.5Gbps PCI ID and info

Changes from v1:
-Added a patch to move all Intel specific PCI device from stmmac_pci.c to
 a new file named dwmac-intel.c.
-Combine v1 patch 1/3 and 2/3 into single patch.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 60d79ab3 d63439f5
...@@ -198,6 +198,15 @@ config DWMAC_SUN8I ...@@ -198,6 +198,15 @@ config DWMAC_SUN8I
EMAC ethernet controller. EMAC ethernet controller.
endif endif
config DWMAC_INTEL
tristate "Intel GMAC support"
default X86
depends on X86 && STMMAC_ETH && PCI
depends on COMMON_CLK
---help---
This selects the Intel platform specific bus support for the
stmmac driver. This driver is used for Intel Quark/EHL/TGL.
config STMMAC_PCI config STMMAC_PCI
tristate "STMMAC PCI bus support" tristate "STMMAC PCI bus support"
depends on STMMAC_ETH && PCI depends on STMMAC_ETH && PCI
......
...@@ -30,5 +30,6 @@ obj-$(CONFIG_DWMAC_GENERIC) += dwmac-generic.o ...@@ -30,5 +30,6 @@ obj-$(CONFIG_DWMAC_GENERIC) += dwmac-generic.o
stmmac-platform-objs:= stmmac_platform.o stmmac-platform-objs:= stmmac_platform.o
dwmac-altr-socfpga-objs := altr_tse_pcs.o dwmac-socfpga.o dwmac-altr-socfpga-objs := altr_tse_pcs.o dwmac-socfpga.o
obj-$(CONFIG_DWMAC_INTEL) += dwmac-intel.o
obj-$(CONFIG_STMMAC_PCI) += stmmac-pci.o obj-$(CONFIG_STMMAC_PCI) += stmmac-pci.o
stmmac-pci-objs:= stmmac_pci.o stmmac-pci-objs:= stmmac_pci.o
// SPDX-License-Identifier: GPL-2.0
/* Copyright (c) 2020, Intel Corporation
*/
#include <linux/clk-provider.h>
#include <linux/pci.h>
#include <linux/dmi.h>
#include "stmmac.h"
/* This struct is used to associate PCI Function of MAC controller on a board,
* discovered via DMI, with the address of PHY connected to the MAC. The
* negative value of the address means that MAC controller is not connected
* with PHY.
*/
struct stmmac_pci_func_data {
unsigned int func;
int phy_addr;
};
struct stmmac_pci_dmi_data {
const struct stmmac_pci_func_data *func;
size_t nfuncs;
};
struct stmmac_pci_info {
int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat);
};
static int stmmac_pci_find_phy_addr(struct pci_dev *pdev,
const struct dmi_system_id *dmi_list)
{
const struct stmmac_pci_func_data *func_data;
const struct stmmac_pci_dmi_data *dmi_data;
const struct dmi_system_id *dmi_id;
int func = PCI_FUNC(pdev->devfn);
size_t n;
dmi_id = dmi_first_match(dmi_list);
if (!dmi_id)
return -ENODEV;
dmi_data = dmi_id->driver_data;
func_data = dmi_data->func;
for (n = 0; n < dmi_data->nfuncs; n++, func_data++)
if (func_data->func == func)
return func_data->phy_addr;
return -ENODEV;
}
static void common_default_data(struct plat_stmmacenet_data *plat)
{
plat->clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
plat->has_gmac = 1;
plat->force_sf_dma_mode = 1;
plat->mdio_bus_data->needs_reset = true;
/* Set default value for multicast hash bins */
plat->multicast_filter_bins = HASH_TABLE_SIZE;
/* Set default value for unicast filter entries */
plat->unicast_filter_entries = 1;
/* Set the maxmtu to a default of JUMBO_LEN */
plat->maxmtu = JUMBO_LEN;
/* Set default number of RX and TX queues to use */
plat->tx_queues_to_use = 1;
plat->rx_queues_to_use = 1;
/* Disable Priority config by default */
plat->tx_queues_cfg[0].use_prio = false;
plat->rx_queues_cfg[0].use_prio = false;
/* Disable RX queues routing by default */
plat->rx_queues_cfg[0].pkt_route = 0x0;
}
static int intel_mgbe_common_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat)
{
int i;
plat->clk_csr = 5;
plat->has_gmac = 0;
plat->has_gmac4 = 1;
plat->force_sf_dma_mode = 0;
plat->tso_en = 1;
plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP;
for (i = 0; i < plat->rx_queues_to_use; i++) {
plat->rx_queues_cfg[i].mode_to_use = MTL_QUEUE_DCB;
plat->rx_queues_cfg[i].chan = i;
/* Disable Priority config by default */
plat->rx_queues_cfg[i].use_prio = false;
/* Disable RX queues routing by default */
plat->rx_queues_cfg[i].pkt_route = 0x0;
}
for (i = 0; i < plat->tx_queues_to_use; i++) {
plat->tx_queues_cfg[i].mode_to_use = MTL_QUEUE_DCB;
/* Disable Priority config by default */
plat->tx_queues_cfg[i].use_prio = false;
}
/* FIFO size is 4096 bytes for 1 tx/rx queue */
plat->tx_fifo_size = plat->tx_queues_to_use * 4096;
plat->rx_fifo_size = plat->rx_queues_to_use * 4096;
plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WRR;
plat->tx_queues_cfg[0].weight = 0x09;
plat->tx_queues_cfg[1].weight = 0x0A;
plat->tx_queues_cfg[2].weight = 0x0B;
plat->tx_queues_cfg[3].weight = 0x0C;
plat->tx_queues_cfg[4].weight = 0x0D;
plat->tx_queues_cfg[5].weight = 0x0E;
plat->tx_queues_cfg[6].weight = 0x0F;
plat->tx_queues_cfg[7].weight = 0x10;
plat->dma_cfg->pbl = 32;
plat->dma_cfg->pblx8 = true;
plat->dma_cfg->fixed_burst = 0;
plat->dma_cfg->mixed_burst = 0;
plat->dma_cfg->aal = 0;
plat->axi = devm_kzalloc(&pdev->dev, sizeof(*plat->axi),
GFP_KERNEL);
if (!plat->axi)
return -ENOMEM;
plat->axi->axi_lpi_en = 0;
plat->axi->axi_xit_frm = 0;
plat->axi->axi_wr_osr_lmt = 1;
plat->axi->axi_rd_osr_lmt = 1;
plat->axi->axi_blen[0] = 4;
plat->axi->axi_blen[1] = 8;
plat->axi->axi_blen[2] = 16;
plat->ptp_max_adj = plat->clk_ptp_rate;
/* Set system clock */
plat->stmmac_clk = clk_register_fixed_rate(&pdev->dev,
"stmmac-clk", NULL, 0,
plat->clk_ptp_rate);
if (IS_ERR(plat->stmmac_clk)) {
dev_warn(&pdev->dev, "Fail to register stmmac-clk\n");
plat->stmmac_clk = NULL;
}
clk_prepare_enable(plat->stmmac_clk);
/* Set default value for multicast hash bins */
plat->multicast_filter_bins = HASH_TABLE_SIZE;
/* Set default value for unicast filter entries */
plat->unicast_filter_entries = 1;
/* Set the maxmtu to a default of JUMBO_LEN */
plat->maxmtu = JUMBO_LEN;
return 0;
}
static int ehl_common_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat)
{
int ret;
plat->rx_queues_to_use = 8;
plat->tx_queues_to_use = 8;
plat->clk_ptp_rate = 200000000;
ret = intel_mgbe_common_data(pdev, plat);
if (ret)
return ret;
return 0;
}
static int ehl_sgmii_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat)
{
plat->bus_id = 1;
plat->phy_addr = 0;
plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
return ehl_common_data(pdev, plat);
}
static struct stmmac_pci_info ehl_sgmii1g_pci_info = {
.setup = ehl_sgmii_data,
};
static int ehl_rgmii_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat)
{
plat->bus_id = 1;
plat->phy_addr = 0;
plat->phy_interface = PHY_INTERFACE_MODE_RGMII;
return ehl_common_data(pdev, plat);
}
static struct stmmac_pci_info ehl_rgmii1g_pci_info = {
.setup = ehl_rgmii_data,
};
static int ehl_pse0_common_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat)
{
plat->bus_id = 2;
plat->phy_addr = 1;
return ehl_common_data(pdev, plat);
}
static int ehl_pse0_rgmii1g_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat)
{
plat->phy_interface = PHY_INTERFACE_MODE_RGMII_ID;
return ehl_pse0_common_data(pdev, plat);
}
static struct stmmac_pci_info ehl_pse0_rgmii1g_pci_info = {
.setup = ehl_pse0_rgmii1g_data,
};
static int ehl_pse0_sgmii1g_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat)
{
plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
return ehl_pse0_common_data(pdev, plat);
}
static struct stmmac_pci_info ehl_pse0_sgmii1g_pci_info = {
.setup = ehl_pse0_sgmii1g_data,
};
static int ehl_pse1_common_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat)
{
plat->bus_id = 3;
plat->phy_addr = 1;
return ehl_common_data(pdev, plat);
}
static int ehl_pse1_rgmii1g_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat)
{
plat->phy_interface = PHY_INTERFACE_MODE_RGMII_ID;
return ehl_pse1_common_data(pdev, plat);
}
static struct stmmac_pci_info ehl_pse1_rgmii1g_pci_info = {
.setup = ehl_pse1_rgmii1g_data,
};
static int ehl_pse1_sgmii1g_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat)
{
plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
return ehl_pse1_common_data(pdev, plat);
}
static struct stmmac_pci_info ehl_pse1_sgmii1g_pci_info = {
.setup = ehl_pse1_sgmii1g_data,
};
static int tgl_common_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat)
{
int ret;
plat->rx_queues_to_use = 6;
plat->tx_queues_to_use = 4;
plat->clk_ptp_rate = 200000000;
ret = intel_mgbe_common_data(pdev, plat);
if (ret)
return ret;
return 0;
}
static int tgl_sgmii_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat)
{
plat->bus_id = 1;
plat->phy_addr = 0;
plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
return tgl_common_data(pdev, plat);
}
static struct stmmac_pci_info tgl_sgmii1g_pci_info = {
.setup = tgl_sgmii_data,
};
static const struct stmmac_pci_func_data galileo_stmmac_func_data[] = {
{
.func = 6,
.phy_addr = 1,
},
};
static const struct stmmac_pci_dmi_data galileo_stmmac_dmi_data = {
.func = galileo_stmmac_func_data,
.nfuncs = ARRAY_SIZE(galileo_stmmac_func_data),
};
static const struct stmmac_pci_func_data iot2040_stmmac_func_data[] = {
{
.func = 6,
.phy_addr = 1,
},
{
.func = 7,
.phy_addr = 1,
},
};
static const struct stmmac_pci_dmi_data iot2040_stmmac_dmi_data = {
.func = iot2040_stmmac_func_data,
.nfuncs = ARRAY_SIZE(iot2040_stmmac_func_data),
};
static const struct dmi_system_id quark_pci_dmi[] = {
{
.matches = {
DMI_EXACT_MATCH(DMI_BOARD_NAME, "Galileo"),
},
.driver_data = (void *)&galileo_stmmac_dmi_data,
},
{
.matches = {
DMI_EXACT_MATCH(DMI_BOARD_NAME, "GalileoGen2"),
},
.driver_data = (void *)&galileo_stmmac_dmi_data,
},
/* There are 2 types of SIMATIC IOT2000: IOT2020 and IOT2040.
* The asset tag "6ES7647-0AA00-0YA2" is only for IOT2020 which
* has only one pci network device while other asset tags are
* for IOT2040 which has two.
*/
{
.matches = {
DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"),
DMI_EXACT_MATCH(DMI_BOARD_ASSET_TAG,
"6ES7647-0AA00-0YA2"),
},
.driver_data = (void *)&galileo_stmmac_dmi_data,
},
{
.matches = {
DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"),
},
.driver_data = (void *)&iot2040_stmmac_dmi_data,
},
{}
};
static int quark_default_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat)
{
int ret;
/* Set common default data first */
common_default_data(plat);
/* Refuse to load the driver and register net device if MAC controller
* does not connect to any PHY interface.
*/
ret = stmmac_pci_find_phy_addr(pdev, quark_pci_dmi);
if (ret < 0) {
/* Return error to the caller on DMI enabled boards. */
if (dmi_get_system_info(DMI_BOARD_NAME))
return ret;
/* Galileo boards with old firmware don't support DMI. We always
* use 1 here as PHY address, so at least the first found MAC
* controller would be probed.
*/
ret = 1;
}
plat->bus_id = pci_dev_id(pdev);
plat->phy_addr = ret;
plat->phy_interface = PHY_INTERFACE_MODE_RMII;
plat->dma_cfg->pbl = 16;
plat->dma_cfg->pblx8 = true;
plat->dma_cfg->fixed_burst = 1;
/* AXI (TODO) */
return 0;
}
static const struct stmmac_pci_info quark_pci_info = {
.setup = quark_default_data,
};
/**
* intel_eth_pci_probe
*
* @pdev: pci device pointer
* @id: pointer to table of device id/id's.
*
* Description: This probing function gets called for all PCI devices which
* match the ID table and are not "owned" by other driver yet. This function
* gets passed a "struct pci_dev *" for each device whose entry in the ID table
* matches the device. The probe functions returns zero when the driver choose
* to take "ownership" of the device or an error code(-ve no) otherwise.
*/
static int intel_eth_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct stmmac_pci_info *info = (struct stmmac_pci_info *)id->driver_data;
struct plat_stmmacenet_data *plat;
struct stmmac_resources res;
int i;
int ret;
plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
if (!plat)
return -ENOMEM;
plat->mdio_bus_data = devm_kzalloc(&pdev->dev,
sizeof(*plat->mdio_bus_data),
GFP_KERNEL);
if (!plat->mdio_bus_data)
return -ENOMEM;
plat->dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*plat->dma_cfg),
GFP_KERNEL);
if (!plat->dma_cfg)
return -ENOMEM;
/* Enable pci device */
ret = pci_enable_device(pdev);
if (ret) {
dev_err(&pdev->dev, "%s: ERROR: failed to enable device\n",
__func__);
return ret;
}
/* Get the base address of device */
for (i = 0; i < PCI_STD_NUM_BARS; i++) {
if (pci_resource_len(pdev, i) == 0)
continue;
ret = pcim_iomap_regions(pdev, BIT(i), pci_name(pdev));
if (ret)
return ret;
break;
}
pci_set_master(pdev);
ret = info->setup(pdev, plat);
if (ret)
return ret;
pci_enable_msi(pdev);
memset(&res, 0, sizeof(res));
res.addr = pcim_iomap_table(pdev)[i];
res.wol_irq = pdev->irq;
res.irq = pdev->irq;
return stmmac_dvr_probe(&pdev->dev, plat, &res);
}
/**
* intel_eth_pci_remove
*
* @pdev: platform device pointer
* Description: this function calls the main to free the net resources
* and releases the PCI resources.
*/
static void intel_eth_pci_remove(struct pci_dev *pdev)
{
struct net_device *ndev = dev_get_drvdata(&pdev->dev);
struct stmmac_priv *priv = netdev_priv(ndev);
int i;
stmmac_dvr_remove(&pdev->dev);
if (priv->plat->stmmac_clk)
clk_unregister_fixed_rate(priv->plat->stmmac_clk);
for (i = 0; i < PCI_STD_NUM_BARS; i++) {
if (pci_resource_len(pdev, i) == 0)
continue;
pcim_iounmap_regions(pdev, BIT(i));
break;
}
pci_disable_device(pdev);
}
static int __maybe_unused intel_eth_pci_suspend(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
int ret;
ret = stmmac_suspend(dev);
if (ret)
return ret;
ret = pci_save_state(pdev);
if (ret)
return ret;
pci_disable_device(pdev);
pci_wake_from_d3(pdev, true);
return 0;
}
static int __maybe_unused intel_eth_pci_resume(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
int ret;
pci_restore_state(pdev);
pci_set_power_state(pdev, PCI_D0);
ret = pci_enable_device(pdev);
if (ret)
return ret;
pci_set_master(pdev);
return stmmac_resume(dev);
}
static SIMPLE_DEV_PM_OPS(intel_eth_pm_ops, intel_eth_pci_suspend,
intel_eth_pci_resume);
#define PCI_DEVICE_ID_INTEL_QUARK_ID 0x0937
#define PCI_DEVICE_ID_INTEL_EHL_RGMII1G_ID 0x4b30
#define PCI_DEVICE_ID_INTEL_EHL_SGMII1G_ID 0x4b31
#define PCI_DEVICE_ID_INTEL_EHL_SGMII2G5_ID 0x4b32
/* Intel(R) Programmable Services Engine (Intel(R) PSE) consist of 2 MAC
* which are named PSE0 and PSE1
*/
#define PCI_DEVICE_ID_INTEL_EHL_PSE0_RGMII1G_ID 0x4ba0
#define PCI_DEVICE_ID_INTEL_EHL_PSE0_SGMII1G_ID 0x4ba1
#define PCI_DEVICE_ID_INTEL_EHL_PSE0_SGMII2G5_ID 0x4ba2
#define PCI_DEVICE_ID_INTEL_EHL_PSE1_RGMII1G_ID 0x4bb0
#define PCI_DEVICE_ID_INTEL_EHL_PSE1_SGMII1G_ID 0x4bb1
#define PCI_DEVICE_ID_INTEL_EHL_PSE1_SGMII2G5_ID 0x4bb2
#define PCI_DEVICE_ID_INTEL_TGL_SGMII1G_ID 0xa0ac
static const struct pci_device_id intel_eth_pci_id_table[] = {
{ PCI_DEVICE_DATA(INTEL, QUARK_ID, &quark_pci_info) },
{ PCI_DEVICE_DATA(INTEL, EHL_RGMII1G_ID, &ehl_rgmii1g_pci_info) },
{ PCI_DEVICE_DATA(INTEL, EHL_SGMII1G_ID, &ehl_sgmii1g_pci_info) },
{ PCI_DEVICE_DATA(INTEL, EHL_SGMII2G5_ID, &ehl_sgmii1g_pci_info) },
{ PCI_DEVICE_DATA(INTEL, EHL_PSE0_RGMII1G_ID,
&ehl_pse0_rgmii1g_pci_info) },
{ PCI_DEVICE_DATA(INTEL, EHL_PSE0_SGMII1G_ID,
&ehl_pse0_sgmii1g_pci_info) },
{ PCI_DEVICE_DATA(INTEL, EHL_PSE0_SGMII2G5_ID,
&ehl_pse0_sgmii1g_pci_info) },
{ PCI_DEVICE_DATA(INTEL, EHL_PSE1_RGMII1G_ID,
&ehl_pse1_rgmii1g_pci_info) },
{ PCI_DEVICE_DATA(INTEL, EHL_PSE1_SGMII1G_ID,
&ehl_pse1_sgmii1g_pci_info) },
{ PCI_DEVICE_DATA(INTEL, EHL_PSE1_SGMII2G5_ID,
&ehl_pse1_sgmii1g_pci_info) },
{ PCI_DEVICE_DATA(INTEL, TGL_SGMII1G_ID, &tgl_sgmii1g_pci_info) },
{}
};
MODULE_DEVICE_TABLE(pci, intel_eth_pci_id_table);
static struct pci_driver intel_eth_pci_driver = {
.name = "intel-eth-pci",
.id_table = intel_eth_pci_id_table,
.probe = intel_eth_pci_probe,
.remove = intel_eth_pci_remove,
.driver = {
.pm = &intel_eth_pm_ops,
},
};
module_pci_driver(intel_eth_pci_driver);
MODULE_DESCRIPTION("INTEL 10/100/1000 Ethernet PCI driver");
MODULE_AUTHOR("Voon Weifeng <weifeng.voon@intel.com>");
MODULE_LICENSE("GPL v2");
...@@ -15,49 +15,10 @@ ...@@ -15,49 +15,10 @@
#include "stmmac.h" #include "stmmac.h"
/*
* This struct is used to associate PCI Function of MAC controller on a board,
* discovered via DMI, with the address of PHY connected to the MAC. The
* negative value of the address means that MAC controller is not connected
* with PHY.
*/
struct stmmac_pci_func_data {
unsigned int func;
int phy_addr;
};
struct stmmac_pci_dmi_data {
const struct stmmac_pci_func_data *func;
size_t nfuncs;
};
struct stmmac_pci_info { struct stmmac_pci_info {
int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat); int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat);
}; };
static int stmmac_pci_find_phy_addr(struct pci_dev *pdev,
const struct dmi_system_id *dmi_list)
{
const struct stmmac_pci_func_data *func_data;
const struct stmmac_pci_dmi_data *dmi_data;
const struct dmi_system_id *dmi_id;
int func = PCI_FUNC(pdev->devfn);
size_t n;
dmi_id = dmi_first_match(dmi_list);
if (!dmi_id)
return -ENODEV;
dmi_data = dmi_id->driver_data;
func_data = dmi_data->func;
for (n = 0; n < dmi_data->nfuncs; n++, func_data++)
if (func_data->func == func)
return func_data->phy_addr;
return -ENODEV;
}
static void common_default_data(struct plat_stmmacenet_data *plat) static void common_default_data(struct plat_stmmacenet_data *plat)
{ {
plat->clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */ plat->clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
...@@ -108,272 +69,6 @@ static const struct stmmac_pci_info stmmac_pci_info = { ...@@ -108,272 +69,6 @@ static const struct stmmac_pci_info stmmac_pci_info = {
.setup = stmmac_default_data, .setup = stmmac_default_data,
}; };
static int intel_mgbe_common_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat)
{
int i;
plat->clk_csr = 5;
plat->has_gmac = 0;
plat->has_gmac4 = 1;
plat->force_sf_dma_mode = 0;
plat->tso_en = 1;
plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP;
for (i = 0; i < plat->rx_queues_to_use; i++) {
plat->rx_queues_cfg[i].mode_to_use = MTL_QUEUE_DCB;
plat->rx_queues_cfg[i].chan = i;
/* Disable Priority config by default */
plat->rx_queues_cfg[i].use_prio = false;
/* Disable RX queues routing by default */
plat->rx_queues_cfg[i].pkt_route = 0x0;
}
for (i = 0; i < plat->tx_queues_to_use; i++) {
plat->tx_queues_cfg[i].mode_to_use = MTL_QUEUE_DCB;
/* Disable Priority config by default */
plat->tx_queues_cfg[i].use_prio = false;
}
/* FIFO size is 4096 bytes for 1 tx/rx queue */
plat->tx_fifo_size = plat->tx_queues_to_use * 4096;
plat->rx_fifo_size = plat->rx_queues_to_use * 4096;
plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WRR;
plat->tx_queues_cfg[0].weight = 0x09;
plat->tx_queues_cfg[1].weight = 0x0A;
plat->tx_queues_cfg[2].weight = 0x0B;
plat->tx_queues_cfg[3].weight = 0x0C;
plat->tx_queues_cfg[4].weight = 0x0D;
plat->tx_queues_cfg[5].weight = 0x0E;
plat->tx_queues_cfg[6].weight = 0x0F;
plat->tx_queues_cfg[7].weight = 0x10;
plat->dma_cfg->pbl = 32;
plat->dma_cfg->pblx8 = true;
plat->dma_cfg->fixed_burst = 0;
plat->dma_cfg->mixed_burst = 0;
plat->dma_cfg->aal = 0;
plat->axi = devm_kzalloc(&pdev->dev, sizeof(*plat->axi),
GFP_KERNEL);
if (!plat->axi)
return -ENOMEM;
plat->axi->axi_lpi_en = 0;
plat->axi->axi_xit_frm = 0;
plat->axi->axi_wr_osr_lmt = 1;
plat->axi->axi_rd_osr_lmt = 1;
plat->axi->axi_blen[0] = 4;
plat->axi->axi_blen[1] = 8;
plat->axi->axi_blen[2] = 16;
plat->ptp_max_adj = plat->clk_ptp_rate;
/* Set system clock */
plat->stmmac_clk = clk_register_fixed_rate(&pdev->dev,
"stmmac-clk", NULL, 0,
plat->clk_ptp_rate);
if (IS_ERR(plat->stmmac_clk)) {
dev_warn(&pdev->dev, "Fail to register stmmac-clk\n");
plat->stmmac_clk = NULL;
}
clk_prepare_enable(plat->stmmac_clk);
/* Set default value for multicast hash bins */
plat->multicast_filter_bins = HASH_TABLE_SIZE;
/* Set default value for unicast filter entries */
plat->unicast_filter_entries = 1;
/* Set the maxmtu to a default of JUMBO_LEN */
plat->maxmtu = JUMBO_LEN;
return 0;
}
static int ehl_common_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat)
{
int ret;
plat->rx_queues_to_use = 8;
plat->tx_queues_to_use = 8;
plat->clk_ptp_rate = 200000000;
ret = intel_mgbe_common_data(pdev, plat);
if (ret)
return ret;
return 0;
}
static int ehl_sgmii_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat)
{
plat->bus_id = 1;
plat->phy_addr = 0;
plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
return ehl_common_data(pdev, plat);
}
static struct stmmac_pci_info ehl_sgmii1g_pci_info = {
.setup = ehl_sgmii_data,
};
static int ehl_rgmii_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat)
{
plat->bus_id = 1;
plat->phy_addr = 0;
plat->phy_interface = PHY_INTERFACE_MODE_RGMII;
return ehl_common_data(pdev, plat);
}
static struct stmmac_pci_info ehl_rgmii1g_pci_info = {
.setup = ehl_rgmii_data,
};
static int tgl_common_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat)
{
int ret;
plat->rx_queues_to_use = 6;
plat->tx_queues_to_use = 4;
plat->clk_ptp_rate = 200000000;
ret = intel_mgbe_common_data(pdev, plat);
if (ret)
return ret;
return 0;
}
static int tgl_sgmii_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat)
{
plat->bus_id = 1;
plat->phy_addr = 0;
plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
return tgl_common_data(pdev, plat);
}
static struct stmmac_pci_info tgl_sgmii1g_pci_info = {
.setup = tgl_sgmii_data,
};
static const struct stmmac_pci_func_data galileo_stmmac_func_data[] = {
{
.func = 6,
.phy_addr = 1,
},
};
static const struct stmmac_pci_dmi_data galileo_stmmac_dmi_data = {
.func = galileo_stmmac_func_data,
.nfuncs = ARRAY_SIZE(galileo_stmmac_func_data),
};
static const struct stmmac_pci_func_data iot2040_stmmac_func_data[] = {
{
.func = 6,
.phy_addr = 1,
},
{
.func = 7,
.phy_addr = 1,
},
};
static const struct stmmac_pci_dmi_data iot2040_stmmac_dmi_data = {
.func = iot2040_stmmac_func_data,
.nfuncs = ARRAY_SIZE(iot2040_stmmac_func_data),
};
static const struct dmi_system_id quark_pci_dmi[] = {
{
.matches = {
DMI_EXACT_MATCH(DMI_BOARD_NAME, "Galileo"),
},
.driver_data = (void *)&galileo_stmmac_dmi_data,
},
{
.matches = {
DMI_EXACT_MATCH(DMI_BOARD_NAME, "GalileoGen2"),
},
.driver_data = (void *)&galileo_stmmac_dmi_data,
},
/*
* There are 2 types of SIMATIC IOT2000: IOT2020 and IOT2040.
* The asset tag "6ES7647-0AA00-0YA2" is only for IOT2020 which
* has only one pci network device while other asset tags are
* for IOT2040 which has two.
*/
{
.matches = {
DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"),
DMI_EXACT_MATCH(DMI_BOARD_ASSET_TAG,
"6ES7647-0AA00-0YA2"),
},
.driver_data = (void *)&galileo_stmmac_dmi_data,
},
{
.matches = {
DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"),
},
.driver_data = (void *)&iot2040_stmmac_dmi_data,
},
{}
};
static int quark_default_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat)
{
int ret;
/* Set common default data first */
common_default_data(plat);
/*
* Refuse to load the driver and register net device if MAC controller
* does not connect to any PHY interface.
*/
ret = stmmac_pci_find_phy_addr(pdev, quark_pci_dmi);
if (ret < 0) {
/* Return error to the caller on DMI enabled boards. */
if (dmi_get_system_info(DMI_BOARD_NAME))
return ret;
/*
* Galileo boards with old firmware don't support DMI. We always
* use 1 here as PHY address, so at least the first found MAC
* controller would be probed.
*/
ret = 1;
}
plat->bus_id = pci_dev_id(pdev);
plat->phy_addr = ret;
plat->phy_interface = PHY_INTERFACE_MODE_RMII;
plat->dma_cfg->pbl = 16;
plat->dma_cfg->pblx8 = true;
plat->dma_cfg->fixed_burst = 1;
/* AXI (TODO) */
return 0;
}
static const struct stmmac_pci_info quark_pci_info = {
.setup = quark_default_data,
};
static int snps_gmac5_default_data(struct pci_dev *pdev, static int snps_gmac5_default_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat) struct plat_stmmacenet_data *plat)
{ {
...@@ -582,19 +277,11 @@ static SIMPLE_DEV_PM_OPS(stmmac_pm_ops, stmmac_pci_suspend, stmmac_pci_resume); ...@@ -582,19 +277,11 @@ static SIMPLE_DEV_PM_OPS(stmmac_pm_ops, stmmac_pci_suspend, stmmac_pci_resume);
#define PCI_VENDOR_ID_STMMAC 0x0700 #define PCI_VENDOR_ID_STMMAC 0x0700
#define PCI_DEVICE_ID_STMMAC_STMMAC 0x1108 #define PCI_DEVICE_ID_STMMAC_STMMAC 0x1108
#define PCI_DEVICE_ID_INTEL_QUARK_ID 0x0937
#define PCI_DEVICE_ID_INTEL_EHL_RGMII1G_ID 0x4b30
#define PCI_DEVICE_ID_INTEL_EHL_SGMII1G_ID 0x4b31
#define PCI_DEVICE_ID_INTEL_TGL_SGMII1G_ID 0xa0ac
#define PCI_DEVICE_ID_SYNOPSYS_GMAC5_ID 0x7102 #define PCI_DEVICE_ID_SYNOPSYS_GMAC5_ID 0x7102
static const struct pci_device_id stmmac_id_table[] = { static const struct pci_device_id stmmac_id_table[] = {
{ PCI_DEVICE_DATA(STMMAC, STMMAC, &stmmac_pci_info) }, { PCI_DEVICE_DATA(STMMAC, STMMAC, &stmmac_pci_info) },
{ PCI_DEVICE_DATA(STMICRO, MAC, &stmmac_pci_info) }, { PCI_DEVICE_DATA(STMICRO, MAC, &stmmac_pci_info) },
{ PCI_DEVICE_DATA(INTEL, QUARK_ID, &quark_pci_info) },
{ PCI_DEVICE_DATA(INTEL, EHL_RGMII1G_ID, &ehl_rgmii1g_pci_info) },
{ PCI_DEVICE_DATA(INTEL, EHL_SGMII1G_ID, &ehl_sgmii1g_pci_info) },
{ PCI_DEVICE_DATA(INTEL, TGL_SGMII1G_ID, &tgl_sgmii1g_pci_info) },
{ PCI_DEVICE_DATA(SYNOPSYS, GMAC5_ID, &snps_gmac5_pci_info) }, { PCI_DEVICE_DATA(SYNOPSYS, GMAC5_ID, &snps_gmac5_pci_info) },
{} {}
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment