drm/i915: Preload LUTs if the hw isn't currently using them

The LUTs are single buffered so in order to program them without
tearing we'd have to do it during vblank (actually to be 100%
effective it has to happen between start of vblank and frame start).
We have no proper mechanism for that at the moment so we just
defer loading them after the vblank waits have happened. That
is not quite sufficient (especially when committing multiple pipes
whose vblanks don't line up) so the LUT load will often leak into
the following frame causing tearing.

However in case the hardware wasn't previously using the LUT we
can preload it before setting the enable bit (which is double
buffered so won't tear). Let's determine if we can do such
preloading and make it happen. Slight variation between the
hardware requires some platforms specifics in the checks.

Hans is seeing ugly colored flash on VLV/CHV macchines (GPD win
and Asus T100HA) when the gamma LUT gets loaded for the first
time as the BIOS has left some junk in the LUT memory.

v2: Deal with uapi vs. hw crtc state split
    s/GCM/CGM/ typo fix

Cc: Hans de Goede <hdegoede@redhat.com>
Fixes: 051a6d8d ("drm/i915: Move LUT programming to happen after vblank waits")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030190815.7359-1-ville.syrjala@linux.intel.comTested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
(cherry picked from commit 0ccc42a2)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit f7702137)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drivers/gpu/drm/i915/display/intel_atomic.c

@@ -201,6 +201,7 @@ intel_crtc_duplicate_state(struct drm_crtc *crtc)
 	crtc_state->update_wm_post = false;
 	crtc_state->fb_changed = false;
 	crtc_state->fifo_changed = false;
+	crtc_state->preload_luts = false;
 	crtc_state->wm.need_postvbl_update = false;
 	crtc_state->fb_bits = 0;
 	crtc_state->update_planes = 0;

drivers/gpu/drm/i915/display/intel_color.c

@@ -990,6 +990,55 @@ void intel_color_commit(const struct intel_crtc_state *crtc_state)
 	dev_priv->display.color_commit(crtc_state);
 }
 
+static bool intel_can_preload_luts(const struct intel_crtc_state *new_crtc_state)
+{
+	struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->base.crtc);
+	struct intel_atomic_state *state =
+		to_intel_atomic_state(new_crtc_state->base.state);
+	const struct intel_crtc_state *old_crtc_state =
+		intel_atomic_get_old_crtc_state(state, crtc);
+
+	return !old_crtc_state->base.gamma_lut &&
+		!old_crtc_state->base.degamma_lut;
+}
+
+static bool chv_can_preload_luts(const struct intel_crtc_state *new_crtc_state)
+{
+	struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->base.crtc);
+	struct intel_atomic_state *state =
+		to_intel_atomic_state(new_crtc_state->base.state);
+	const struct intel_crtc_state *old_crtc_state =
+		intel_atomic_get_old_crtc_state(state, crtc);
+
+	/*
+	 * CGM_PIPE_MODE is itself single buffered. We'd have to
+	 * somehow split it out from chv_load_luts() if we wanted
+	 * the ability to preload the CGM LUTs/CSC without tearing.
+	 */
+	if (old_crtc_state->cgm_mode || new_crtc_state->cgm_mode)
+		return false;
+
+	return !old_crtc_state->base.gamma_lut;
+}
+
+static bool glk_can_preload_luts(const struct intel_crtc_state *new_crtc_state)
+{
+	struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->base.crtc);
+	struct intel_atomic_state *state =
+		to_intel_atomic_state(new_crtc_state->base.state);
+	const struct intel_crtc_state *old_crtc_state =
+		intel_atomic_get_old_crtc_state(state, crtc);
+
+	/*
+	 * The hardware degamma is active whenever the pipe
+	 * CSC is active. Thus even if the old state has no
+	 * software degamma we need to avoid clobbering the
+	 * linear hardware degamma mid scanout.
+	 */
+	return !old_crtc_state->csc_enable &&
+		!old_crtc_state->base.gamma_lut;
+}
+
 int intel_color_check(struct intel_crtc_state *crtc_state)
 {
 	struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
@@ -1133,6 +1182,8 @@ static int i9xx_color_check(struct intel_crtc_state *crtc_state)
 	if (ret)
 		return ret;
 
+	crtc_state->preload_luts = intel_can_preload_luts(crtc_state);
+
 	return 0;
 }
 
@@ -1185,6 +1236,8 @@ static int chv_color_check(struct intel_crtc_state *crtc_state)
 	if (ret)
 		return ret;
 
+	crtc_state->preload_luts = chv_can_preload_luts(crtc_state);
+
 	return 0;
 }
 
@@ -1224,6 +1277,8 @@ static int ilk_color_check(struct intel_crtc_state *crtc_state)
 	if (ret)
 		return ret;
 
+	crtc_state->preload_luts = intel_can_preload_luts(crtc_state);
+
 	return 0;
 }
 
@@ -1281,6 +1336,8 @@ static int ivb_color_check(struct intel_crtc_state *crtc_state)
 	if (ret)
 		return ret;
 
+	crtc_state->preload_luts = intel_can_preload_luts(crtc_state);
+
 	return 0;
 }
 
@@ -1319,6 +1376,8 @@ static int glk_color_check(struct intel_crtc_state *crtc_state)
 	if (ret)
 		return ret;
 
+	crtc_state->preload_luts = glk_can_preload_luts(crtc_state);
+
 	return 0;
 }
 
@@ -1368,6 +1427,8 @@ static int icl_color_check(struct intel_crtc_state *crtc_state)
 
 	crtc_state->csc_mode = icl_csc_mode(crtc_state);
 
+	crtc_state->preload_luts = intel_can_preload_luts(crtc_state);
+
 	return 0;
 }
 

drivers/gpu/drm/i915/display/intel_display.c

@@ -13743,6 +13743,11 @@ static void intel_update_crtc(struct intel_crtc *crtc,
 		/* vblanks work again, re-enable pipe CRC. */
 		intel_crtc_enable_pipe_crc(crtc);
 	} else {
+		if (new_crtc_state->preload_luts &&
+		    (new_crtc_state->base.color_mgmt_changed ||
+		     new_crtc_state->update_pipe))
+			intel_color_load_luts(new_crtc_state);
+
 		intel_pre_plane_update(old_crtc_state, new_crtc_state);
 
 		if (new_crtc_state->update_pipe)
@@ -14037,6 +14042,7 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
 	for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
 		if (new_crtc_state->base.active &&
 		    !needs_modeset(new_crtc_state) &&
+		    !new_crtc_state->preload_luts &&
 		    (new_crtc_state->base.color_mgmt_changed ||
 		     new_crtc_state->update_pipe))
 			intel_color_load_luts(new_crtc_state);

drivers/gpu/drm/i915/display/intel_display_types.h

@@ -761,6 +761,7 @@ struct intel_crtc_state {
 	bool update_wm_pre, update_wm_post; /* watermarks are updated */
 	bool fb_changed; /* fb on any of the planes is changed */
 	bool fifo_changed; /* FIFO split is changed */
+	bool preload_luts;
 
 	/* Pipe source size (ie. panel fitter input size)
 	 * All planes will be positioned inside this space,