[media] drx-j: fix boot failure due to null pointer dereference

DJH_DEBUG only code path in drxbsp_i2c_write_read() dereferences
w_dev_addr and subsequently w_dev_addr->user_data->i2c which results
in failure during boot. This patch fixes the null pointer derefence
bug as well as the following compile errors:

  LD      arch/x86/built-in.o
  CC      drivers/media/dvb-frontends/drx39xyj/drxj.o
drivers/media/dvb-frontends/drx39xyj/drxj.c: In function ‘drxbsp_i2c_write_read’:
drivers/media/dvb-frontends/drx39xyj/drxj.c:1558:25: error: redeclaration of ‘state’ with no linkage
  struct drx39xxj_state *state = w_dev_addr->user_data;
                         ^
drivers/media/dvb-frontends/drx39xyj/drxj.c:1512:25: note: previous declaration of ‘state’ was here
  struct drx39xxj_state *state;
                         ^
drivers/media/dvb-frontends/drx39xyj/drxj.c:1558:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
  struct drx39xxj_state *state = w_dev_addr->user_data;
  ^
drivers/media/dvb-frontends/drx39xyj/drxj.c:1560:17: error: redeclaration of ‘msg’ with no linkage
  struct i2c_msg msg[2] = {
                 ^
drivers/media/dvb-frontends/drx39xyj/drxj.c:1513:17: note: previous declaration of ‘msg’ was here
  struct i2c_msg msg[2];
                 ^
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Acked-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

drivers/media/dvb-frontends/drx39xyj/drxj.c

@@ -1551,14 +1551,23 @@ int drxbsp_i2c_write_read(struct i2c_device_addr *w_dev_addr,
 	}
 
 #ifdef DJH_DEBUG
-	struct drx39xxj_state *state = w_dev_addr->user_data;
+	if (w_dev_addr == NULL || r_dev_addr == NULL)
+		return 0;
 
-	struct i2c_msg msg[2] = {
-		{.addr = w_dev_addr->i2c_addr,
-		 .flags = 0, .buf = wData, .len = w_count},
-		{.addr = r_dev_addr->i2c_addr,
-		 .flags = I2C_M_RD, .buf = r_data, .len = r_count},
-	};
+	state = w_dev_addr->user_data;
+
+	if (state->i2c == NULL)
+		return 0;
+
+	msg[0].addr = w_dev_addr->i2c_addr;
+	msg[0].flags = 0;
+	msg[0].buf = wData;
+	msg[0].len = w_count;
+	msg[1].addr = r_dev_addr->i2c_addr;
+	msg[1].flags = I2C_M_RD;
+	msg[1].buf = r_data;
+	msg[1].len = r_count;
+	num_msgs = 2;
 
 	pr_debug("drx3933 i2c operation addr=%x i2c=%p, wc=%x rc=%x\n",
 	       w_dev_addr->i2c_addr, state->i2c, w_count, r_count);