Commit 1b04cbea authored by Sonic Zhang's avatar Sonic Zhang Committed by Mike Frysinger

Blackfin: bf537-stamp: re-use the fixed regulator voltage driver

Rather than write our own ADP switch driver, use the existing fixed
regulator driver and rewrite the platform resources accordingly.
Signed-off-by: default avatarSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
parent 2adcf194
......@@ -35,12 +35,13 @@
#include <asm/reboot.h>
#include <asm/portmux.h>
#include <asm/dpmc.h>
#ifdef CONFIG_REGULATOR_ADP_SWITCH
#include <linux/regulator/adp_switch.h>
#ifdef CONFIG_REGULATOR_FIXED_VOLTAGE
#include <linux/regulator/fixed.h>
#endif
#ifdef CONFIG_REGULATOR_AD5398
#include <linux/regulator/ad5398.h>
#endif
#include <linux/regulator/machine.h>
#include <linux/regulator/consumer.h>
#include <linux/regulator/userspace-consumer.h>
......@@ -2590,50 +2591,38 @@ static struct platform_device bfin_ac97 = {
};
#endif
#if defined(CONFIG_REGULATOR_ADP_SWITCH) || defined(CONFIG_REGULATOR_ADP_SWITCH_MODULE)
#define REGULATOR_ADP122 "adp122"
#define REGULATOR_ADP150 "adp150"
#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
#define REGULATOR_ADP122 "adp122"
#define REGULATOR_ADP122_UV 2500000
static struct regulator_consumer_supply adp122_consumers = {
.supply = REGULATOR_ADP122,
};
static struct regulator_consumer_supply adp150_consumers = {
.supply = REGULATOR_ADP150,
};
static struct regulator_init_data adp_switch_regulator_data[] = {
{
.constraints = {
.name = REGULATOR_ADP122,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.min_uA = 0,
.max_uA = 300000,
},
.num_consumer_supplies = 1, /* only 1 */
.consumer_supplies = &adp122_consumers,
.driver_data = (void *)GPIO_PF2, /* gpio port only */
},
{
.constraints = {
.name = REGULATOR_ADP150,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.min_uA = 0,
.max_uA = 150000,
},
.num_consumer_supplies = 1, /* only 1 */
.consumer_supplies = &adp150_consumers,
.driver_data = (void *)GPIO_PF3, /* gpio port only */
static struct regulator_init_data adp_switch_regulator_data = {
.constraints = {
.name = REGULATOR_ADP122,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.min_uV = REGULATOR_ADP122_UV,
.max_uV = REGULATOR_ADP122_UV,
.min_uA = 0,
.max_uA = 300000,
},
.num_consumer_supplies = 1, /* only 1 */
.consumer_supplies = &adp122_consumers,
};
static struct adp_switch_platform_data adp_switch_pdata = {
.regulator_num = ARRAY_SIZE(adp_switch_regulator_data),
.regulator_data = adp_switch_regulator_data,
static struct fixed_voltage_config adp_switch_pdata = {
.supply_name = REGULATOR_ADP122,
.microvolts = REGULATOR_ADP122_UV,
.gpio = GPIO_PF2,
.enable_high = 1,
.enabled_at_boot = 0,
.init_data = &adp_switch_regulator_data,
};
static struct platform_device adp_switch_device = {
.name = "adp_switch",
.name = "reg-fixed-voltage",
.id = 0,
.dev = {
.platform_data = &adp_switch_pdata,
......@@ -2659,24 +2648,6 @@ static struct platform_device adp122_userspace_consumer_device = {
.platform_data = &adp122_userspace_comsumer_data,
},
};
static struct regulator_bulk_data adp150_bulk_data = {
.supply = REGULATOR_ADP150,
};
static struct regulator_userspace_consumer_data adp150_userspace_comsumer_data = {
.name = REGULATOR_ADP150,
.num_supplies = 1,
.supplies = &adp150_bulk_data,
};
static struct platform_device adp150_userspace_consumer_device = {
.name = "reg-userspace-consumer",
.id = 1,
.dev = {
.platform_data = &adp150_userspace_comsumer_data,
},
};
#endif
#endif
......@@ -2829,12 +2800,11 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_REGULATOR_ADP_SWITCH) || defined(CONFIG_REGULATOR_ADP_SWITCH_MODULE)
#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
&adp_switch_device,
#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
&adp122_userspace_consumer_device,
&adp150_userspace_consumer_device,
#endif
#endif
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment