Merge tag 'drm-misc-next-2020-02-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 5.7:

UAPI Changes:
  - lima: Add support for heap buffers

Cross-subsystem Changes:

Core Changes:
  - Implement mode_config mode_valid for memory constrained drivers
  - Bus format negociation between bridges
  - Consolidate fake vblank events for drivers without vblank interrupts
  - drm/bufs: dma_alloc related cleanups
  - drm/dp_mst: Various fixes
  - drm/print: New drm_device based print helpers
  - Thomas is a drm-misc maintainer now!

Driver Changes:
  - DPMS cleanups for atomic drivers
  - Removal of owner field in SPI tinydrm drivers
  - Removal of explicit dependency on DT for tinydrm drivers
  - Conversion to YAML schemas for DT bindings
  - tidss: New driver
  - virtio: various reworks and fixes
  - Our usual dozen or so new panels or bridges
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200210093421.xu4sofldm6wm6xq6@gilmour.lan

Documentation/devicetree/bindings/display/bridge/ps8640.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ps8640.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPI DSI to eDP Video Format Converter Device Tree Bindings
+
+maintainers:
+  - Nicolas Boichat <drinkcat@chromium.org>
+  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
+
+description: |
+  The PS8640 is a low power MIPI-to-eDP video format converter supporting
+  mobile devices with embedded panel resolutions up to 2048 x 1536. The
+  device accepts a single channel of MIPI DSI v1.1, with up to four lanes
+  plus clock, at a transmission rate up to 1.5Gbit/sec per lane. The
+  device outputs eDP v1.4, one or two lanes, at a link rate of up to
+  3.24Gbit/sec per lane.
+
+properties:
+  compatible:
+    const: parade,ps8640
+
+  reg:
+    maxItems: 1
+    description: Base I2C address of the device.
+
+  powerdown-gpios:
+    maxItems: 1
+    description: GPIO connected to active low powerdown.
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to active low reset.
+
+  vdd12-supply:
+    maxItems: 1
+    description: Regulator for 1.2V digital core power.
+
+  vdd33-supply:
+    maxItems: 1
+    description: Regulator for 3.3V digital core power.
+
+  ports:
+    type: object
+    description:
+      A node containing DSI input & output port nodes with endpoint
+      definitions as documented in
+      Documentation/devicetree/bindings/media/video-interfaces.txt
+      Documentation/devicetree/bindings/graph.txt
+    properties:
+      port@0:
+        type: object
+        description: |
+          Video port for DSI input
+
+      port@1:
+        type: object
+        description: |
+          Video port for eDP output (panel or connector).
+
+    required:
+      - port@0
+
+required:
+  - compatible
+  - reg
+  - powerdown-gpios
+  - reset-gpios
+  - vdd12-supply
+  - vdd33-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ps8640: edp-bridge@18 {
+            compatible = "parade,ps8640";
+            reg = <0x18>;
+            powerdown-gpios = <&pio 116 GPIO_ACTIVE_LOW>;
+            reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>;
+            vdd12-supply = <&ps8640_fixed_1v2>;
+            vdd33-supply = <&mt6397_vgp2_reg>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    ps8640_in: endpoint {
+                        remote-endpoint = <&dsi0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    ps8640_out: endpoint {
+                        remote-endpoint = <&panel_in>;
+                   };
+                };
+            };
+        };
+    };
+

Documentation/devicetree/bindings/display/ilitek,ili9486.yaml

+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/ilitek,ili9486.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9486 display panels device tree bindings
+
+maintainers:
+  - Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
+
+description:
+  This binding is for display panels using an Ilitek ILI9486 controller in SPI
+  mode.
+
+allOf:
+  - $ref: panel/panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          # Waveshare 3.5" 320x480 Color TFT LCD
+        - waveshare,rpi-lcd-35
+          # Ozzmaker 3.5" 320x480 Color TFT LCD
+        - ozzmaker,piscreen
+      - const: ilitek,ili9486
+
+  spi-max-frequency:
+    maximum: 32000000
+
+  dc-gpios:
+    maxItems: 1
+    description: Display data/command selection (D/CX)
+
+  backlight: true
+  reg: true
+  reset-gpios: true
+  rotation: true
+
+required:
+  - compatible
+  - reg
+  - dc-gpios
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    backlight: backlight {
+            compatible = "gpio-backlight";
+            gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+    };
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+
+            display@0{
+                    compatible = "waveshare,rpi-lcd-35", "ilitek,ili9486";
+                    reg = <0>;
+                    spi-max-frequency = <32000000>;
+                    dc-gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+                    reset-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+                    rotation = <180>;
+                    backlight = <&backlight>;
+            };
+    };
+
+...

Documentation/devicetree/bindings/display/panel/auo,b080uan01.txt

-AU Optronics Corporation 8.0" WUXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,b101ean01"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/auo,b101aw03.txt

-AU Optronics Corporation 10.1" WSVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,b101aw03"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/auo,b101ean01.txt

-AU Optronics Corporation 10.1" WSVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,b101ean01"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/auo,b101xtn01.txt

-AU Optronics Corporation 10.1" WXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,b101xtn01"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/auo,b116xw03.txt

-AU Optronics Corporation 11.6" HD (1366x768) color TFT-LCD panel
-
-Required properties:
-- compatible: should be "auo,b116xw03"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/auo,b133htn01.txt

-AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel
-
-Required properties:
-- compatible: should be "auo,b133htn01"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/auo,b133xtn01.txt

-AU Optronics Corporation 13.3" WXGA (1366x768) TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,b133xtn01"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/auo,g070vvn01.txt

-AU Optronics Corporation 7.0" FHD (800 x 480) TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,g070vvn01"
-- backlight: phandle of the backlight device attached to the panel
-- power-supply: single regulator to provide the supply voltage
-
-Required nodes:
-- port: Parallel port mapping to connect this display
-
-This panel needs single power supply voltage. Its backlight is conntrolled
-via PWM signal.
-
-Example:
---------
-
-Example device-tree definition when connected to iMX6Q based board
-
-	lcd_panel: lcd-panel {
-		compatible = "auo,g070vvn01";
-		backlight = <&backlight_lcd>;
-		power-supply = <&reg_display>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};

Documentation/devicetree/bindings/display/panel/auo,g101evn010.txt

-AU Optronics Corporation 10.1" (1280x800) color TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,g101evn010"
-- power-supply: as specified in the base binding
-
-Optional properties:
-- backlight: as specified in the base binding
-- enable-gpios: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/auo,g104sn02.txt

-AU Optronics Corporation 10.4" (800x600) color TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,g104sn02"
-- power-supply: as specified in the base binding
-
-Optional properties:
-- backlight: as specified in the base binding
-- enable-gpios: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/auo,g133han01.txt

-AU Optronics Corporation 13.3" FHD (1920x1080) TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,g133han01"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/auo,g185han01.txt

-AU Optronics Corporation 18.5" FHD (1920x1080) TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,g185han01"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/auo,p320hvn03.txt

-AU Optronics Corporation 31.5" FHD (1920x1080) TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,p320hvn03"
-- power-supply: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/auo,t215hvn01.txt

-AU Optronics Corporation 21.5" FHD (1920x1080) color TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,t215hvn01"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/avic,tm070ddh03.txt

-Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel
-
-Required properties:
-- compatible: should be "avic,tm070ddh03"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt

-BOE HV070WSA-100 7.01" WSVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "boe,hv070wsa-100"
-- power-supply: regulator to provide the VCC supply voltage (3.3 volts)
-- enable-gpios: GPIO pin to enable and disable panel (active high)
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
-
-The device node can contain one 'port' child node with one child
-'endpoint' node, according to the bindings defined in [1]. This
-node should describe panel's video bus.
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-
-	panel: panel {
-		compatible = "boe,hv070wsa-100";
-		power-supply = <&vcc_3v3_reg>;
-		enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>;
-		port {
-			panel_ep: endpoint {
-				remote-endpoint = <&bridge_out_ep>;
-			};
-		};
-	};

Documentation/devicetree/bindings/display/panel/boe,nv101wxmn51.txt

-BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "boe,nv101wxmn51"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/boe,tv080wum-nl0.txt

-Boe Corporation 8.0" WUXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "boe,tv080wum-nl0"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,tv101wum-nl6.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE TV101WUM-NL6 DSI Display Panel
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Sam Ravnborg <sam@ravnborg.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+        # BOE TV101WUM-NL6 10.1" WUXGA TFT LCD panel
+      - boe,tv101wum-nl6
+        # AUO KD101N80-45NA 10.1" WUXGA TFT LCD panel
+      - auo,kd101n80-45na
+        # BOE TV101WUM-N53 10.1" WUXGA TFT LCD panel
+      - boe,tv101wum-n53
+        # AUO B101UAN08.3 10.1" WUXGA TFT LCD panel
+      - auo,b101uan08.3
+
+  reg:
+    description: the virtual channel number of a DSI peripheral
+
+  enable-gpios:
+    description: a GPIO spec for the enable pin
+
+  pp1800-supply:
+    description: core voltage supply
+
+  avdd-supply:
+    description: phandle of the regulator that provides positive voltage
+
+  avee-supply:
+    description: phandle of the regulator that provides negative voltage
+
+  backlight:
+    description: phandle of the backlight device attached to the panel
+
+  port: true
+
+required:
+ - compatible
+ - reg
+ - enable-gpios
+ - pp1800-supply
+ - avdd-supply
+ - avee-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "boe,tv101wum-nl6";
+            reg = <0>;
+            enable-gpios = <&pio 45 0>;
+            avdd-supply = <&ppvarn_lcd>;
+            avee-supply = <&ppvarp_lcd>;
+            pp1800-supply = <&pp1800_lcd>;
+            backlight = <&backlight_lcd0>;
+            status = "okay";
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+
+...

Documentation/devicetree/bindings/display/panel/cdtech,s043wq26h-ct7.txt

-CDTech(H.K.) Electronics Limited 4.3" 480x272 color TFT-LCD panel
-
-Required properties:
-- compatible: should be "cdtech,s043wq26h-ct7"
-- power-supply: as specified in the base binding
-
-Optional properties:
-- backlight: as specified in the base binding
-- enable-gpios: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/cdtech,s070wv95-ct16.txt

-CDTech(H.K.) Electronics Limited 7" 800x480 color TFT-LCD panel
-
-Required properties:
-- compatible: should be "cdtech,s070wv95-ct16"
-- power-supply: as specified in the base binding
-
-Optional properties:
-- backlight: as specified in the base binding
-- enable-gpios: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/chunghwa,claa070wp03xg.txt

-Chunghwa Picture Tubes Ltd. 7" WXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "chunghwa,claa070wp03xg"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/chunghwa,claa101wa01a.txt

-Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "chunghwa,claa101wa01a"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/chunghwa,claa101wb03.txt

-Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "chunghwa,claa101wb03"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/dataimage,scf0700c48ggu18.txt

-DataImage, Inc. 7" WVGA (800x480) TFT LCD panel with 24-bit parallel interface.
-
-Required properties:
-- compatible: should be "dataimage,scf0700c48ggu18"
-- power-supply: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/dlc,dlc1010gig.txt

-DLC Display Co. DLC1010GIG 10.1" WXGA TFT LCD Panel
-
-Required properties:
-- compatible: should be "dlc,dlc1010gig"
-- power-supply: See simple-panel.txt
-
-Optional properties:
-- enable-gpios: See simple-panel.txt
-- backlight: See simple-panel.txt
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/edt,et-series.txt

-Emerging Display Technology Corp. Displays
-==========================================
-
-
-Display bindings for EDT Display Technology Corp. Displays which are
-compatible with the simple-panel binding, which is specified in
-simple-panel.txt
-
-3,5" QVGA TFT Panels
---------------------
-+-----------------+---------------------+-------------------------------------+
-| Identifier      | compatbile          | description                         |
-+=================+=====================+=====================================+
-| ET035012DM6     | edt,et035012dm6     | 3.5" QVGA TFT LCD panel             |
-+-----------------+---------------------+-------------------------------------+
-
-4,3" WVGA TFT Panels
---------------------
-
-+-----------------+---------------------+-------------------------------------+
-| Identifier      | compatbile          | description                         |
-+=================+=====================+=====================================+
-| ETM0430G0DH6    | edt,etm0430g0dh6    | 480x272 TFT Display                 |
-+-----------------+---------------------+-------------------------------------+
-
-5,7" WVGA TFT Panels
---------------------
-
-+-----------------+---------------------+-------------------------------------+
-| Identifier      | compatbile          | description                         |
-+=================+=====================+=====================================+
-| ET057090DHU     | edt,et057090dhu     | 5.7" VGA TFT LCD panel              |
-+-----------------+---------------------+-------------------------------------+
-
-
-7,0" WVGA TFT Panels
---------------------
-
-+-----------------+---------------------+-------------------------------------+
-| Identifier      | compatbile          | description                         |
-+=================+=====================+=====================================+
-| ETM0700G0DH6    | edt,etm070080dh6    | WVGA TFT Display with capacitive    |
-|                 | edt,etm0700g0dh6    | Touchscreen                         |
-+-----------------+---------------------+-------------------------------------+
-| ETM0700G0BDH6   | edt,etm070080bdh6   | Same as ETM0700G0DH6 but with       |
-|                 |                     | inverted pixel clock.               |
-+-----------------+---------------------+-------------------------------------+
-| ETM0700G0EDH6   | edt,etm070080edh6   | Same display as the ETM0700G0BDH6,  |
-|                 |                     | but with changed Hardware for the   |
-|                 |                     | backlight and the touch interface   |
-+-----------------+---------------------+-------------------------------------+
-| ET070080DH6     | edt,etm070080dh6    | Same timings as the ETM0700G0DH6,   |
-|                 |                     | but with resistive touch.           |
-+-----------------+---------------------+-------------------------------------+
-

Documentation/devicetree/bindings/display/panel/evervision,vgg804821.txt

-Evervision Electronics Co. Ltd. VGG804821 5.0" WVGA TFT LCD Panel
-
-Required properties:
-- compatible: should be "evervision,vgg804821"
-- power-supply: See simple-panel.txt
-
-Optional properties:
-- backlight: See simple-panel.txt
-- enable-gpios: See simple-panel.txt
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/feixin,k101-im2ba02.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Feixin K101 IM2BA02 10.1" MIPI-DSI LCD panel
+
+maintainers:
+  - Icenowy Zheng <icenowy@aosc.io>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: feixin,k101-im2ba02
+  reg: true
+  backlight: true
+  reset-gpios: true
+  avdd-supply:
+     description: regulator that supplies the AVDD voltage
+  dvdd-supply:
+     description: regulator that supplies the DVDD voltage
+  cvdd-supply:
+     description: regulator that supplies the CVDD voltage
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - dvdd-supply
+  - cvdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "feixin,k101-im2ba02";
+            reg = <0>;
+            avdd-supply = <&reg_dc1sw>;
+            dvdd-supply = <&reg_dc1sw>;
+            cvdd-supply = <&reg_ldo_io1>;
+            reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>;
+            backlight = <&backlight>;
+        };
+    };
+
+...

Documentation/devicetree/bindings/display/panel/foxlink,fl500wvr00-a0t.txt

-Foxlink Group 5" WVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "foxlink,fl500wvr00-a0t"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/friendlyarm,hd702e.txt

-FriendlyELEC HD702E 800x1280 LCD panel
-
-HD702E lcd is FriendlyELEC developed eDP LCD panel with 800x1280
-resolution. It has built in Goodix, GT9271 captive touchscreen
-with backlight adjustable via PWM.
-
-Required properties:
-- compatible: should be "friendlyarm,hd702e"
-- power-supply: regulator to provide the supply voltage
-
-Optional properties:
-- backlight: phandle of the backlight device attached to the panel
-
-Optional nodes:
-- Video port for LCD panel input.
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
-
-Example:
-
-	panel {
-		compatible ="friendlyarm,hd702e", "simple-panel";
-		backlight = <&backlight>;
-		power-supply = <&vcc3v3_sys>;
-
-		port {
-			panel_in_edp: endpoint {
-				remote-endpoint = <&edp_out_panel>;
-			};
-		};
-	};

Documentation/devicetree/bindings/display/panel/giantplus,gpg482739qs5.txt

-GiantPlus GPG48273QS5 4.3" (480x272) WQVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "giantplus,gpg48273qs5"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/hannstar,hsd070pww1.txt

-HannStar Display Corp. HSD070PWW1 7.0" WXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "hannstar,hsd070pww1"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/hannstar,hsd100pxn1.txt

-HannStar Display Corp. HSD100PXN1 10.1" XGA LVDS panel
-
-Required properties:
-- compatible: should be "hannstar,hsd100pxn1"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/hit,tx23d38vm0caa.txt

-Hitachi Ltd. Corporation 9" WVGA (800x480) TFT LCD panel
-
-Required properties:
-- compatible: should be "hit,tx23d38vm0caa"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/innolux,at043tn24.txt

-Innolux AT043TN24 4.3" WQVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "innolux,at043tn24"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/innolux,at070tn92.txt

-Innolux AT070TN92 7.0" WQVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "innolux,at070tn92"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/innolux,g070y2-l01.txt

-Innolux G070Y2-L01 7" WVGA (800x480) TFT LCD panel
-
-Required properties:
-- compatible: should be "innolux,g070y2-l01"
-- power-supply: as specified in the base binding
-
-Optional properties:
-- backlight: as specified in the base binding
-- enable-gpios: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/innolux,g101ice-l01.txt

-Innolux Corporation 10.1" G101ICE-L01 WXGA (1280x800) LVDS panel
-
-Required properties:
-- compatible: should be "innolux,g101ice-l01"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/innolux,g121i1-l01.txt

-Innolux Corporation 12.1" WXGA (1280x800) TFT LCD panel
-
-Required properties:
-- compatible: should be "innolux,g121i1-l01"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/innolux,g121x1-l03.txt

-Innolux Corporation 12.1" G121X1-L03 XGA (1024x768) TFT LCD panel
-
-Required properties:
-- compatible: should be "innolux,g121x1-l03"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/innolux,n116bge.txt

-Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
-
-Required properties:
-- compatible: should be "innolux,n116bge"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/innolux,n156bge-l21.txt

-InnoLux 15.6" WXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "innolux,n156bge-l21"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/innolux,zj070na-01p.txt

-Innolux Corporation 7.0" WSVGA (1024x600) TFT LCD panel
-
-Required properties:
-- compatible: should be "innolux,zj070na-01p"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt

-Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel
-
-Required properties:
-- compatible: should be "koe,tx14d24vm1bpa"
-- backlight: phandle of the backlight device attached to the panel
-- power-supply: single regulator to provide the supply voltage
-
-Required nodes:
-- port: Parallel port mapping to connect this display
-
-This panel needs single power supply voltage. Its backlight is conntrolled
-via PWM signal.
-
-Example:
---------
-
-Example device-tree definition when connected to iMX53 based board
-
-	lcd_panel: lcd-panel {
-		compatible = "koe,tx14d24vm1bpa";
-		backlight = <&backlight_lcd>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-Then one needs to extend the dispX node:
-
-	lcd_display: disp1 {
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};

Documentation/devicetree/bindings/display/panel/koe,tx31d200vm0baa.txt

-Kaohsiung Opto-Electronics. TX31D200VM0BAA 12.3" HSXGA LVDS panel
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
-
-Required properties:
-- compatible: should be "koe,tx31d200vm0baa"
-
-Optional properties:
-- backlight: phandle of the backlight device attached to the panel
-
-Optional nodes:
-- Video port for LVDS panel input.
-
-Example:
-	panel {
-		compatible = "koe,tx31d200vm0baa";
-		backlight = <&backlight_lvds>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};

Documentation/devicetree/bindings/display/panel/kyo,tcg121xglp.txt

-Kyocera Corporation 12.1" XGA (1024x768) TFT LCD panel
-
-Required properties:
-- compatible: should be "kyo,tcg121xglp"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/lemaker,bl035-rgb-002.txt

-LeMaker BL035-RGB-002 3.5" QVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "lemaker,bl035-rgb-002"
-- power-supply: as specified in the base binding
-
-Optional properties:
-- backlight: as specified in the base binding
-- enable-gpios: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/lg,lb070wv8.txt

-LG 7" (800x480 pixels) TFT LCD panel
-
-Required properties:
-- compatible: should be "lg,lb070wv8"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/lg,lp079qx1-sp0v.txt

-LG LP079QX1-SP0V 7.9" (1536x2048 pixels) TFT LCD panel
-
-Required properties:
-- compatible: should be "lg,lp079qx1-sp0v"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/lg,lp097qx1-spa1.txt

-LG 9.7" (2048x1536 pixels) TFT LCD panel
-
-Required properties:
-- compatible: should be "lg,lp097qx1-spa1"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/lg,lp120up1.txt

-LG 12.0" (1920x1280 pixels) TFT LCD panel
-
-Required properties:
-- compatible: should be "lg,lp120up1"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/lg,lp129qe.txt

-LG 12.9" (2560x1700 pixels) TFT LCD panel
-
-Required properties:
-- compatible: should be "lg,lp129qe"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/mitsubishi,aa070mc01.txt

-Mitsubishi "AA070MC01 7.0" WVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "mitsubishi,aa070mc01-ca1"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/nec,nl12880b20-05.txt

-NEC LCD Technologies, Ltd. 12.1" WXGA (1280x800) LVDS TFT LCD panel
-
-Required properties:
-- compatible: should be "nec,nl12880bc20-05"
-- power-supply: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/nec,nl4827hc19-05b.txt

-NEC LCD Technologies,Ltd. WQVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "nec,nl4827hc19-05b"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/netron-dy,e231732.txt

-Netron-DY E231732 7.0" WSVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "netron-dy,e231732"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/newhaven,nhd-4.3-480272ef-atxl.txt

-Newhaven Display International 480 x 272 TFT LCD panel
-
-Required properties:
-- compatible: should be "newhaven,nhd-4.3-480272ef-atxl"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/nlt,nl192108ac18-02d.txt

-NLT Technologies, Ltd. 15.6" FHD (1920x1080) LVDS TFT LCD panel
-
-Required properties:
-- compatible: should be "nlt,nl192108ac18-02d"
-- power-supply: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/nvd,9128.txt

-New Vision Display 7.0" 800 RGB x 480 TFT LCD panel
-
-Required properties:
-- compatible: should be "nvd,9128"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/okaya,rs800480t-7x0gp.txt

-OKAYA Electric America, Inc. RS800480T-7X0GP 7" WVGA LCD panel
-
-Required properties:
-- compatible: should be "okaya,rs800480t-7x0gp"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino-43-ts.txt

-Olimex 4.3" TFT LCD panel
-
-Required properties:
-- compatible: should be "olimex,lcd-olinuxino-43-ts"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/ontat,yx700wv03.txt

-On Tat Industrial Company 7" DPI TFT panel.
-
-Required properties:
-- compatible: should be "ontat,yx700wv03"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt

-Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode)
-
-The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using
-a MIPI-DSI video interface. Its backlight is managed through the DSI link.
-
-Required properties:
-  - compatible: "orisetech,otm8009a"
-  - reg: the virtual channel number of a DSI peripheral
-
-Optional properties:
-  - reset-gpios: a GPIO spec for the reset pin (active low).
-  - power-supply: phandle of the regulator that provides the supply voltage.
-
-Example:
-&dsi {
-	...
-	panel@0 {
-		compatible = "orisetech,otm8009a";
-		reg = <0>;
-		reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
-		power-supply = <&v1v8>;
-	};
-};

Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml

+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/orisetech,otm8009a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode)
+
+maintainers:
+  - Philippe CORNU <philippe.cornu@st.com>
+
+description: |
+             The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using
+             a MIPI-DSI video interface. Its backlight is managed through the DSI link.
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+
+  compatible:
+    const: orisetech,otm8009a
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  enable-gpios: true
+  port: true
+  power-supply: true
+
+  reset-gpios:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    dsi@0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      panel@0 {
+        compatible = "orisetech,otm8009a";
+        reg = <0>;
+        reset-gpios = <&gpiof 15 0>;
+        power-supply = <&v1v8>;
+      };
+    };
+...
+

Documentation/devicetree/bindings/display/panel/ortustech,com37h3m05dtc.txt

-OrtusTech COM37H3M05DTC Blanview 3.7" VGA portrait TFT-LCD panel
-
-Required properties:
-- compatible: should be "ortustech,com37h3m05dtc"
-
-Optional properties:
-- enable-gpios: GPIO pin to enable or disable the panel
-- backlight: phandle of the backlight device attached to the panel
-- power-supply: phandle of the regulator that provides the supply voltage
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/ortustech,com37h3m99dtc.txt

-OrtusTech COM37H3M99DTC Blanview 3.7" VGA portrait TFT-LCD panel
-
-Required properties:
-- compatible: should be "ortustech,com37h3m99dtc"
-
-Optional properties:
-- enable-gpios: GPIO pin to enable or disable the panel
-- backlight: phandle of the backlight device attached to the panel
-- power-supply: phandle of the regulator that provides the supply voltage
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/ortustech,com43h4m85ulc.txt

-OrtusTech COM43H4M85ULC Blanview 3.7" TFT-LCD panel
-
-Required properties:
-- compatible: should be "ortustech,com43h4m85ulc"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/osddisplays,osd070t1718-19ts.txt

-OSD Displays OSD070T1718-19TS 7" WVGA TFT LCD panel
-
-Required properties:
-- compatible: shall be "osddisplays,osd070t1718-19ts"
-- power-supply: see simple-panel.txt
-
-Optional properties:
-- backlight: see simple-panel.txt
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory. No other simple-panel properties than
-the ones specified herein are valid.

Documentation/devicetree/bindings/display/panel/osddisplays,osd101t2045-53ts.txt

-One Stop Displays OSD101T2045-53TS 10.1" 1920x1200 panel
-
-Required properties:
-- compatible: should be "osddisplays,osd101t2045-53ts"
-- power-supply: as specified in the base binding
-
-Optional properties:
-- backlight: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/panasonic,vvx10f004b00.txt

-Panasonic Corporation 10.1" WUXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "panasonic,vvx10f004b00"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/panasonic,vvx10f034n00.txt

-Panasonic 10" WUXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "panasonic,vvx10f034n00"
-- reg: DSI virtual channel of the peripheral
-- power-supply: phandle of the regulator that provides the supply voltage
-
-Optional properties:
-- backlight: phandle of the backlight device attached to the panel
-
-Example:
-
-	mdss_dsi@fd922800 {
-		panel@0 {
-			compatible = "panasonic,vvx10f034n00";
-			reg = <0>;
-			power-supply = <&vreg_vsp>;
-			backlight = <&lp8566_wled>;
-		};
-	};

Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml

+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-simple-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple DSI panels with a single power-supply
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Sam Ravnborg <sam@ravnborg.org>
+
+description: |
+  This binding file is a collection of the DSI panels that
+  requires only a single power-supply.
+  There are optionally a backlight and an enable GPIO.
+  The panel may use an OF graph binding for the association to the display,
+  or it may be a direct child node of the display.
+
+  If the panel is more advanced a dedicated binding file is required.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+
+  compatible:
+    enum:
+      # compatible must be listed in alphabetical order, ordered by compatible.
+      # The description in the comment is mandatory for each compatible.
+
+        # Panasonic 10" WUXGA TFT LCD panel
+      - panasonic,vvx10f034n00
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  backlight: true
+  enable-gpios: true
+  port: true
+  power-supply: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - power-supply
+  - reg
+
+examples:
+  - |
+    mdss_dsi@fd922800 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      panel@0 {
+        compatible = "panasonic,vvx10f034n00";
+        reg = <0>;
+        power-supply = <&vcc_lcd_reg>;
+
+        port {
+          panel: endpoint {
+            remote-endpoint = <&ltdc_out>;
+          };
+        };
+      };
+    };

Documentation/devicetree/bindings/display/panel/qiaodian,qd43003c0-40.txt

-QiaoDian XianShi Corporation 4"3 TFT LCD panel
-
-Required properties:
-- compatible: should be "qiaodian,qd43003c0-40"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/raydium,rm68200.txt

-Raydium Semiconductor Corporation RM68200 5.5" 720p MIPI-DSI TFT LCD panel
-
-The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD
-panel connected using a MIPI-DSI video interface.
-
-Required properties:
-  - compatible: "raydium,rm68200"
-  - reg: the virtual channel number of a DSI peripheral
-
-Optional properties:
-  - reset-gpios: a GPIO spec for the reset pin (active low).
-  - power-supply: phandle of the regulator that provides the supply voltage.
-  - backlight: phandle of the backlight device attached to the panel.
-
-Example:
-&dsi {
-	...
-	panel@0 {
-		compatible = "raydium,rm68200";
-		reg = <0>;
-		reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>;
-		power-supply = <&v1v8>;
-		backlight = <&pwm_backlight>;
-	};
-};

Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml

+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/raydium,rm68200.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raydium Semiconductor Corporation RM68200 5.5" 720p MIPI-DSI TFT LCD panel
+
+maintainers:
+  - Philippe CORNU <philippe.cornu@st.com>
+
+description: |
+             The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD
+             panel connected using a MIPI-DSI video interface.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+
+  compatible:
+    const: raydium,rm68200
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  backlight: true
+  enable-gpios: true
+  port: true
+  power-supply: true
+
+  reset-gpios:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - power-supply
+  - reg
+
+examples:
+  - |
+    dsi@0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      panel@0 {
+        compatible = "raydium,rm68200";
+        reg = <0>;
+        reset-gpios = <&gpiof 15 0>;
+        power-supply = <&v1v8>;
+        backlight = <&pwm_backlight>;
+      };
+    };
+...

Documentation/devicetree/bindings/display/panel/rocktech,rk070er9427.txt

-Rocktech Display Ltd. RK070ER9427 800(RGB)x480 TFT LCD panel
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
-
-Required properties:
-- compatible: should be "rocktech,rk070er9427"
-
-Optional properties:
-- backlight: phandle of the backlight device attached to the panel
-
-Optional nodes:
-- Video port for LCD panel input.
-
-Example:
-	panel {
-		compatible = "rocktech,rk070er9427";
-		backlight = <&backlight_lcd>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};

Documentation/devicetree/bindings/display/panel/samsung,lsn122dl01-c01.txt

-Samsung 12.2" (2560x1600 pixels) TFT LCD panel
-
-Required properties:
-- compatible: should be "samsung,lsn122dl01-c01"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/samsung,ltn101nt05.txt

-Samsung Electronics 10.1" WSVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "samsung,ltn101nt05"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/samsung,ltn140at29-301.txt

-Samsung Electronics 14" WXGA (1366x768) TFT LCD panel
-
-Required properties:
-- compatible: should be "samsung,ltn140at29-301"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6e88a0-ams452ef01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung AMS452EF01 AMOLED panel with S6E88A0 video mode DSI controller
+
+maintainers:
+  - Michael Srba <Michael.Srba@seznam.cz>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: samsung,s6e88a0-ams452ef01
+  reg: true
+  reset-gpios: true
+  vdd3-supply:
+     description: core voltage supply
+  vci-supply:
+     description: voltage supply for analog circuits
+
+required:
+  - compatible
+  - reg
+  - vdd3-supply
+  - vci-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            panel@0 {
+                    reg = <0>;
+
+                    compatible = "samsung,s6e88a0-ams452ef01";
+
+                    vdd3-supply = <&pm8916_l17>;
+                    vci-supply = <&reg_vlcd_vci>;
+                    reset-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
+            };
+    };

Documentation/devicetree/bindings/display/panel/sharp,lq035q7db03.txt

-Sharp LQ035Q7DB03 3.5" QVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "sharp,lq035q7db03"
-- power-supply: phandle of the regulator that provides the supply voltage
-
-Optional properties:
-- enable-gpios: GPIO pin to enable or disable the panel
-- backlight: phandle of the backlight device attached to the panel
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/sharp,lq070y3dg3b.txt

-Sharp LQ070Y3DG3B 7.0" WVGA landscape TFT LCD panel
-
-Required properties:
-- compatible: should be "sharp,lq070y3dg3b"
-
-Optional properties:
-- enable-gpios: GPIO pin to enable or disable the panel
-- backlight: phandle of the backlight device attached to the panel
-- power-supply: phandle of the regulator that provides the supply voltage
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/sharp,lq101k1ly04.txt

-Sharp Display Corp. LQ101K1LY04 10.07" WXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "sharp,lq101k1ly04"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/sharp,lq123p1jx31.txt

-Sharp 12.3" (2400x1600 pixels) TFT LCD panel
-
-Required properties:
-- compatible: should be "sharp,lq123p1jx31"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/shelly,sca07010-bfn-lnn.txt

-Shelly SCA07010-BFN-LNN 7.0" WVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "shelly,sca07010-bfn-lnn"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/starry,kr122ea0sra.txt

-Starry 12.2" (1920x1200 pixels) TFT LCD panel
-
-Required properties:
-- compatible: should be "starry,kr122ea0sra"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/tianma,tm070jdhg30.txt

-Tianma Micro-electronics TM070JDHG30 7.0" WXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "tianma,tm070jdhg30"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/tianma,tm070rvhg71.txt

-Tianma Micro-electronics TM070RVHG71 7.0" WXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "tianma,tm070rvhg71"
-- power-supply: single regulator to provide the supply voltage
-- backlight: phandle of the backlight device attached to the panel
-
-Required nodes:
-- port: LVDS port mapping to connect this display
-
-This panel needs single power supply voltage. Its backlight is conntrolled
-via PWM signal.
-
-Example:
---------
-
-Example device-tree definition when connected to iMX6Q based board
-
-	panel: panel-lvds0 {
-		compatible = "tianma,tm070rvhg71";
-		backlight = <&backlight_lvds>;
-		power-supply = <&reg_lvds>;
-
-		port {
-			panel_in_lvds0: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};

Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt

-Toshiba 8.9" WXGA (1280x768) TFT LCD panel
-
-Required properties:
-- compatible: should be "toshiba,lt089ac29000"
-- power-supply: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/tpk,f07a-0102.txt

-TPK U.S.A. LLC Fusion 7" integrated projected capacitive touch display with,
-800 x 480 (WVGA) LCD panel.
-
-Required properties:
-- compatible: should be "tpk,f07a-0102"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/tpk,f10a-0102.txt

-TPK U.S.A. LLC Fusion 10.1" integrated projected capacitive touch display with,
-1024 x 600 (WSVGA) LCD panel.
-
-Required properties:
-- compatible: should be "tpk,f10a-0102"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/urt,umsh-8596md.txt

-United Radiant Technology UMSH-8596MD-xT 7.0" WVGA TFT LCD panel
-
-Supported are LVDS versions (-11T, -19T) and parallel ones
-(-T, -1T, -7T, -20T).
-
-Required properties:
-- compatible: should be one of:
-  "urt,umsh-8596md-t",
-  "urt,umsh-8596md-1t",
-  "urt,umsh-8596md-7t",
-  "urt,umsh-8596md-11t",
-  "urt,umsh-8596md-19t",
-  "urt,umsh-8596md-20t".
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/vl050_8048nt_c01.txt

-VXT 800x480 color TFT LCD panel
-
-Required properties:
-- compatible: should be "vxt,vl050-8048nt-c01"
-- power-supply: as specified in the base binding
-
-Optional properties:
-- backlight: as specified in the base binding
-- enable-gpios: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/winstar,wf35ltiacd.txt

-Winstar Display Corporation 3.5" QVGA (320x240) TFT LCD panel
-
-Required properties:
-- compatible: should be "winstar,wf35ltiacd"
-- power-supply: regulator to provide the VCC supply voltage (3.3 volts)
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
-
-Example:
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&hlcdc_pwm 0 50000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 31 63 95 127 159 191 223 255>;
-		default-brightness-level = <191>;
-		power-supply = <&bl_reg>;
-	};
-
-	bl_reg: backlight_regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "backlight-power-supply";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	panel: panel {
-		compatible = "winstar,wf35ltiacd", "simple-panel";
-		backlight = <&backlight>;
-		power-supply = <&panel_reg>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			panel_input: endpoint {
-				remote-endpoint = <&hlcdc_panel_output>;
-			};
-		};
-	};
-
-	panel_reg: panel_regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "panel-power-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};

Documentation/devicetree/bindings/display/sitronix,st7735r.txt

-Sitronix ST7735R display panels
-
-This binding is for display panels using a Sitronix ST7735R controller in SPI
-mode.
-
-Required properties:
-- compatible:	"jianda,jd-t18003-t01", "sitronix,st7735r"
-- dc-gpios:	Display data/command selection (D/CX)
-- reset-gpios:	Reset signal (RSTX)
-
-The node for this driver must be a child node of a SPI controller, hence
-all mandatory properties described in ../spi/spi-bus.txt must be specified.
-
-Optional properties:
-- rotation:	panel rotation in degrees counter clockwise (0,90,180,270)
-- backlight:	phandle of the backlight device attached to the panel
-
-Example:
-
-	backlight: backlight {
-		compatible = "gpio-backlight";
-		gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
-	};
-
-	...
-
-	display@0{
-		compatible = "jianda,jd-t18003-t01", "sitronix,st7735r";
-		reg = <0>;
-		spi-max-frequency = <32000000>;
-		dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
-		rotation = <270>;
-		backlight = &backlight;
-	};

Documentation/devicetree/bindings/display/sitronix,st7735r.yaml

+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/sitronix,st7735r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sitronix ST7735R Display Panels Device Tree Bindings
+
+maintainers:
+  - David Lechner <david@lechnology.com>
+
+description:
+  This binding is for display panels using a Sitronix ST7715R or ST7735R
+  controller in SPI mode.
+
+allOf:
+  - $ref: panel/panel-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - description:
+          Adafruit 1.8" 160x128 Color TFT LCD (Product ID 358 or 618)
+        items:
+          - enum:
+              - jianda,jd-t18003-t01
+          - const: sitronix,st7735r
+      - description:
+          Okaya 1.44" 128x128 Color TFT LCD (E.g. Renesas YRSK-LCD-PMOD)
+        items:
+          - enum:
+              - okaya,rh128128t
+          - const: sitronix,st7715r
+
+  spi-max-frequency:
+    maximum: 32000000
+
+  dc-gpios:
+    maxItems: 1
+    description: Display data/command selection (D/CX)
+
+  backlight: true
+  reg: true
+  reset-gpios: true
+  rotation: true
+
+required:
+  - compatible
+  - reg
+  - dc-gpios
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    backlight: backlight {
+            compatible = "gpio-backlight";
+            gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
+    };
+
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            display@0{
+                    compatible = "jianda,jd-t18003-t01", "sitronix,st7735r";
+                    reg = <0>;
+                    spi-max-frequency = <32000000>;
+                    dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
+                    reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
+                    rotation = <270>;
+            };
+    };
+
+...