Commit 1bac1072 authored by David Chang's avatar David Chang Committed by David S. Miller

r8169: check ALDPS bit and disable it if enabled for the 8168g

Windows driver will enable ALDPS function, but linux driver and firmware
do not have any configuration related to ALDPS function for 8168g.
So restart system to linux and remove the NIC cable, LAN enter ALDPS,
then LAN RX will be disabled.

This issue can be easily reproduced on dual boot windows and linux
system with RTL_GIGA_MAC_VER_40 chip.

Realtek said, ALDPS function can be disabled by configuring to PHY,
switch to page 0x0A43, reg0x10 bit2=0.
Signed-off-by: default avatarDavid Chang <dchang@suse.com>
Acked-by: default avatarHayes Wang <hayeswang@realtek.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent db31c55a
...@@ -3465,6 +3465,11 @@ static void rtl8168g_1_hw_phy_config(struct rtl8169_private *tp) ...@@ -3465,6 +3465,11 @@ static void rtl8168g_1_hw_phy_config(struct rtl8169_private *tp)
rtl_writephy(tp, 0x14, 0x9065); rtl_writephy(tp, 0x14, 0x9065);
rtl_writephy(tp, 0x14, 0x1065); rtl_writephy(tp, 0x14, 0x1065);
/* Check ALDPS bit, disable it if enabled */
rtl_writephy(tp, 0x1f, 0x0a43);
if (rtl_readphy(tp, 0x10) & 0x0004)
rtl_w1w0_phy(tp, 0x10, 0x0000, 0x0004);
rtl_writephy(tp, 0x1f, 0x0000); rtl_writephy(tp, 0x1f, 0x0000);
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment