Skip to content

L
linux
Commit 1c45f577 authored by Marc Kleine-Budde's avatar Marc Kleine-Budde
Browse files
Options

can: flexcan: add ethtool support to change rx-rtr setting during runtime 

This patch adds a private flag to the flexcan driver to switch the
"rx-rtr" setting on and off.

"rx-rtr" on  - Receive RTR frames. (default)
               The CAN controller can and will receive RTR frames.

	       On some IP cores the controller cannot receive RTR
	       frames in the more performant "RX mailbox" mode and
	       will use "RX FIFO" mode instead.

"rx-rtr" off - Waive ability to receive RTR frames. (not supported on all IP cores)
               This mode activates the "RX mailbox mode" for better
	       performance, on some IP cores RTR frames cannot be
	       received anymore.

The "RX FIFO" mode uses a FIFO with a depth of 6 CAN frames.
The "RX mailbox" mode uses up to 62 mailboxes.

Link: https://lore.kernel.org/all/20220107193105.1699523-6-mkl@pengutronix.deSigned-off-by: default avatarDario Binacchi <dario.binacchi@amarulasolutions.com>
Co-developed-by: default avatarDario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
parent c5c88591
Show whitespace changes
Inline Side-by-side
Showing with 260 additions and 99 deletions
drivers/net/can/flexcan/Makefile
View file @ 1c45f577
......@@ -4,3 +4,4 @@ obj-$(CONFIG_CAN_FLEXCAN) += flexcan.o
flexcan-objs :=
flexcan-objs += flexcan-core.o
flexcan-objs += flexcan-ethtool.o
drivers/net/can/flexcan/flexcan-core.c
View file @ 1c45f577
......@@ -15,7 +15,6 @@
#include <linux/can/dev.h>
#include <linux/can/error.h>
#include <linux/can/led.h>
#include <linux/can/rx-offload.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/firmware/imx/sci.h>
......@@ -33,6 +32,8 @@
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include "flexcan.h"
#define DRV_NAME "flexcan"
/* 8 for RX fifo and 2 error handling */
......@@ -206,59 +207,6 @@
#define FLEXCAN_TIMEOUT_US (250)
/* FLEXCAN hardware feature flags
*
* Below is some version info we got:
* SOC Version IP-Version Glitch- [TR]WRN_INT IRQ Err Memory err RTR rece- FD Mode MB
* Filter? connected? Passive detection ption in MB Supported?
* MCF5441X FlexCAN2 ? no yes no no yes no 16
* MX25 FlexCAN2 03.00.00.00 no no no no no no 64
* MX28 FlexCAN2 03.00.04.00 yes yes no no no no 64
* MX35 FlexCAN2 03.00.00.00 no no no no no no 64
* MX53 FlexCAN2 03.00.00.00 yes no no no no no 64
* MX6s FlexCAN3 10.00.12.00 yes yes no no yes no 64
* MX8QM FlexCAN3 03.00.23.00 yes yes no no yes yes 64
* MX8MP FlexCAN3 03.00.17.01 yes yes no yes yes yes 64
* VF610 FlexCAN3 ? no yes no yes yes? no 64
* LS1021A FlexCAN2 03.00.04.00 no yes no no yes no 64
* LX2160A FlexCAN3 03.00.23.00 no yes no yes yes yes 64
*
* Some SOCs do not have the RX_WARN & TX_WARN interrupt line connected.
*/
/* [TR]WRN_INT not connected */
#define FLEXCAN_QUIRK_BROKEN_WERR_STATE BIT(1)
/* Disable RX FIFO Global mask */
#define FLEXCAN_QUIRK_DISABLE_RXFG BIT(2)
/* Enable EACEN and RRS bit in ctrl2 */
#define FLEXCAN_QUIRK_ENABLE_EACEN_RRS BIT(3)
/* Disable non-correctable errors interrupt and freeze mode */
#define FLEXCAN_QUIRK_DISABLE_MECR BIT(4)
/* Use mailboxes (not FIFO) for RX path */
#define FLEXCAN_QUIRK_USE_RX_MAILBOX BIT(5)
/* No interrupt for error passive */
#define FLEXCAN_QUIRK_BROKEN_PERR_STATE BIT(6)
/* default to BE register access */
#define FLEXCAN_QUIRK_DEFAULT_BIG_ENDIAN BIT(7)
/* Setup stop mode with GPR to support wakeup */
#define FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR BIT(8)
/* Support CAN-FD mode */
#define FLEXCAN_QUIRK_SUPPORT_FD BIT(9)
/* support memory detection and correction */
#define FLEXCAN_QUIRK_SUPPORT_ECC BIT(10)
/* Setup stop mode with SCU firmware to support wakeup */
#define FLEXCAN_QUIRK_SETUP_STOP_MODE_SCFW BIT(11)
/* Setup 3 separate interrupts, main, boff and err */
#define FLEXCAN_QUIRK_NR_IRQ_3 BIT(12)
/* Setup 16 mailboxes */
#define FLEXCAN_QUIRK_NR_MB_16 BIT(13)
/* Device supports RX via mailboxes */
#define FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX BIT(14)
/* Device supports RTR reception via mailboxes */
#define FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX_RTR BIT(15)
/* Device supports RX via FIFO */
#define FLEXCAN_QUIRK_SUPPPORT_RX_FIFO BIT(16)
/* Structure of the message buffer */
struct flexcan_mb {
u32 can_ctrl;
......@@ -345,51 +293,6 @@ struct flexcan_regs {
static_assert(sizeof(struct flexcan_regs) == 0x4 * 18 + 0xfb8);
struct flexcan_devtype_data {
u32 quirks; /* quirks needed for different IP cores */
};
struct flexcan_stop_mode {
struct regmap *gpr;
u8 req_gpr;
u8 req_bit;
};
struct flexcan_priv {
struct can_priv can;
struct can_rx_offload offload;
struct device *dev;
struct flexcan_regs __iomem *regs;
struct flexcan_mb __iomem *tx_mb;
struct flexcan_mb __iomem *tx_mb_reserved;
u8 tx_mb_idx;
u8 mb_count;
u8 mb_size;
u8 clk_src; /* clock source of CAN Protocol Engine */
u8 scu_idx;
u64 rx_mask;
u64 tx_mask;
u32 reg_ctrl_default;
struct clk *clk_ipg;
struct clk *clk_per;
struct flexcan_devtype_data devtype_data;
struct regulator *reg_xceiver;
struct flexcan_stop_mode stm;
int irq_boff;
int irq_err;
/* IPC handle when setup stop mode by System Controller firmware(scfw) */
struct imx_sc_ipc *sc_ipc_handle;
/* Read and Write APIs */
u32 (*read)(void __iomem *addr);
void (*write)(u32 val, void __iomem *addr);
};
static const struct flexcan_devtype_data fsl_mcf5441x_devtype_data = {
.quirks = FLEXCAN_QUIRK_BROKEN_PERR_STATE |
FLEXCAN_QUIRK_NR_IRQ_3 | FLEXCAN_QUIRK_NR_MB_16 |
......@@ -2219,6 +2122,7 @@ static int flexcan_probe(struct platform_device *pdev)
SET_NETDEV_DEV(dev, &pdev->dev);
dev->netdev_ops = &flexcan_netdev_ops;
flexcan_set_ethtool_ops(dev);
dev->irq = irq;
dev->flags |= IFF_ECHO;
......
drivers/net/can/flexcan/flexcan-ethtool.c 0 → 100644
View file @ 1c45f577
// SPDX-License-Identifier: GPL-2.0+
/* Copyright (c) 2022 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com>
* Copyright (c) 2022 Pengutronix, Marc Kleine-Budde <kernel@pengutronix.de>
*
*/
#include <linux/can/dev.h>
#include <linux/ethtool.h>
#include <linux/kernel.h>
#include <linux/netdevice.h>
#include <linux/platform_device.h>
#include "flexcan.h"
static const char flexcan_priv_flags_strings[][ETH_GSTRING_LEN] = {
#define FLEXCAN_PRIV_FLAGS_RX_RTR BIT(0)
"rx-rtr",
};
static void
flexcan_get_strings(struct net_device *ndev, u32 stringset, u8 *data)
{
switch (stringset) {
case ETH_SS_PRIV_FLAGS:
memcpy(data, flexcan_priv_flags_strings,
sizeof(flexcan_priv_flags_strings));
}
}
static u32 flexcan_get_priv_flags(struct net_device *ndev)
{
const struct flexcan_priv *priv = netdev_priv(ndev);
u32 priv_flags = 0;
if (flexcan_active_rx_rtr(priv))
priv_flags |= FLEXCAN_PRIV_FLAGS_RX_RTR;
return priv_flags;
}
static int flexcan_set_priv_flags(struct net_device *ndev, u32 priv_flags)
{
struct flexcan_priv *priv = netdev_priv(ndev);
u32 quirks = priv->devtype_data.quirks;
if (priv_flags & FLEXCAN_PRIV_FLAGS_RX_RTR) {
if (flexcan_supports_rx_mailbox_rtr(priv))
quirks |= FLEXCAN_QUIRK_USE_RX_MAILBOX;
else if (flexcan_supports_rx_fifo(priv))
quirks &= ~FLEXCAN_QUIRK_USE_RX_MAILBOX;
else
quirks |= FLEXCAN_QUIRK_USE_RX_MAILBOX;
} else {
if (flexcan_supports_rx_mailbox(priv))
quirks |= FLEXCAN_QUIRK_USE_RX_MAILBOX;
else
quirks &= ~FLEXCAN_QUIRK_USE_RX_MAILBOX;
}
if (quirks != priv->devtype_data.quirks && netif_running(ndev))
return -EBUSY;
priv->devtype_data.quirks = quirks;
if (!(priv_flags & FLEXCAN_PRIV_FLAGS_RX_RTR) &&
!flexcan_active_rx_rtr(priv))
netdev_info(ndev,
"Activating RX mailbox mode, cannot receive RTR frames.\n");
return 0;
}
static int flexcan_get_sset_count(struct net_device *netdev, int sset)
{
switch (sset) {
case ETH_SS_PRIV_FLAGS:
return ARRAY_SIZE(flexcan_priv_flags_strings);
default:
return -EOPNOTSUPP;
}
}
static const struct ethtool_ops flexcan_ethtool_ops = {
.get_strings = flexcan_get_strings,
.get_priv_flags = flexcan_get_priv_flags,
.set_priv_flags = flexcan_set_priv_flags,
.get_sset_count = flexcan_get_sset_count,
};
void flexcan_set_ethtool_ops(struct net_device *netdev)
{
netdev->ethtool_ops = &flexcan_ethtool_ops;
}
drivers/net/can/flexcan/flexcan.h 0 → 100644
View file @ 1c45f577
/* SPDX-License-Identifier: GPL-2.0
* flexcan.c - FLEXCAN CAN controller driver
*
* Copyright (c) 2005-2006 Varma Electronics Oy
* Copyright (c) 2009 Sascha Hauer, Pengutronix
* Copyright (c) 2010-2017 Pengutronix, Marc Kleine-Budde <kernel@pengutronix.de>
* Copyright (c) 2014 David Jander, Protonic Holland
* Copyright (C) 2022 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com>
*
* Based on code originally by Andrey Volkov <avolkov@varma-el.com>
*
*/
#ifndef _FLEXCAN_H
#define _FLEXCAN_H
#include <linux/can/rx-offload.h>
/* FLEXCAN hardware feature flags
*
* Below is some version info we got:
* SOC Version IP-Version Glitch- [TR]WRN_INT IRQ Err Memory err RTR rece- FD Mode MB
* Filter? connected? Passive detection ption in MB Supported?
* MCF5441X FlexCAN2 ? no yes no no yes no 16
* MX25 FlexCAN2 03.00.00.00 no no no no no no 64
* MX28 FlexCAN2 03.00.04.00 yes yes no no no no 64
* MX35 FlexCAN2 03.00.00.00 no no no no no no 64
* MX53 FlexCAN2 03.00.00.00 yes no no no no no 64
* MX6s FlexCAN3 10.00.12.00 yes yes no no yes no 64
* MX8QM FlexCAN3 03.00.23.00 yes yes no no yes yes 64
* MX8MP FlexCAN3 03.00.17.01 yes yes no yes yes yes 64
* VF610 FlexCAN3 ? no yes no yes yes? no 64
* LS1021A FlexCAN2 03.00.04.00 no yes no no yes no 64
* LX2160A FlexCAN3 03.00.23.00 no yes no yes yes yes 64
*
* Some SOCs do not have the RX_WARN & TX_WARN interrupt line connected.
*/
/* [TR]WRN_INT not connected */
#define FLEXCAN_QUIRK_BROKEN_WERR_STATE BIT(1)
/* Disable RX FIFO Global mask */
#define FLEXCAN_QUIRK_DISABLE_RXFG BIT(2)
/* Enable EACEN and RRS bit in ctrl2 */
#define FLEXCAN_QUIRK_ENABLE_EACEN_RRS BIT(3)
/* Disable non-correctable errors interrupt and freeze mode */
#define FLEXCAN_QUIRK_DISABLE_MECR BIT(4)
/* Use mailboxes (not FIFO) for RX path */
#define FLEXCAN_QUIRK_USE_RX_MAILBOX BIT(5)
/* No interrupt for error passive */
#define FLEXCAN_QUIRK_BROKEN_PERR_STATE BIT(6)
/* default to BE register access */
#define FLEXCAN_QUIRK_DEFAULT_BIG_ENDIAN BIT(7)
/* Setup stop mode with GPR to support wakeup */
#define FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR BIT(8)
/* Support CAN-FD mode */
#define FLEXCAN_QUIRK_SUPPORT_FD BIT(9)
/* support memory detection and correction */
#define FLEXCAN_QUIRK_SUPPORT_ECC BIT(10)
/* Setup stop mode with SCU firmware to support wakeup */
#define FLEXCAN_QUIRK_SETUP_STOP_MODE_SCFW BIT(11)
/* Setup 3 separate interrupts, main, boff and err */
#define FLEXCAN_QUIRK_NR_IRQ_3 BIT(12)
/* Setup 16 mailboxes */
#define FLEXCAN_QUIRK_NR_MB_16 BIT(13)
/* Device supports RX via mailboxes */
#define FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX BIT(14)
/* Device supports RTR reception via mailboxes */
#define FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX_RTR BIT(15)
/* Device supports RX via FIFO */
#define FLEXCAN_QUIRK_SUPPPORT_RX_FIFO BIT(16)
struct flexcan_devtype_data {
u32 quirks; /* quirks needed for different IP cores */
};
struct flexcan_stop_mode {
struct regmap *gpr;
u8 req_gpr;
u8 req_bit;
};
struct flexcan_priv {
struct can_priv can;
struct can_rx_offload offload;
struct device *dev;
struct flexcan_regs __iomem *regs;
struct flexcan_mb __iomem *tx_mb;
struct flexcan_mb __iomem *tx_mb_reserved;
u8 tx_mb_idx;
u8 mb_count;
u8 mb_size;
u8 clk_src; /* clock source of CAN Protocol Engine */
u8 scu_idx;
u64 rx_mask;
u64 tx_mask;
u32 reg_ctrl_default;
struct clk *clk_ipg;
struct clk *clk_per;
struct flexcan_devtype_data devtype_data;
struct regulator *reg_xceiver;
struct flexcan_stop_mode stm;
int irq_boff;
int irq_err;
/* IPC handle when setup stop mode by System Controller firmware(scfw) */
struct imx_sc_ipc *sc_ipc_handle;
/* Read and Write APIs */
u32 (*read)(void __iomem *addr);
void (*write)(u32 val, void __iomem *addr);
};
void flexcan_set_ethtool_ops(struct net_device *dev);
static inline bool
flexcan_supports_rx_mailbox(const struct flexcan_priv *priv)
{
const u32 quirks = priv->devtype_data.quirks;
return quirks & FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX;
}
static inline bool
flexcan_supports_rx_mailbox_rtr(const struct flexcan_priv *priv)
{
const u32 quirks = priv->devtype_data.quirks;
return (quirks & (FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX |
FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX_RTR)) ==
(FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX |
FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX_RTR);
}
static inline bool
flexcan_supports_rx_fifo(const struct flexcan_priv *priv)
{
const u32 quirks = priv->devtype_data.quirks;
return quirks & FLEXCAN_QUIRK_SUPPPORT_RX_FIFO;
}
static inline bool
flexcan_active_rx_rtr(const struct flexcan_priv *priv)
{
const u32 quirks = priv->devtype_data.quirks;
if (quirks & FLEXCAN_QUIRK_USE_RX_MAILBOX) {
if (quirks & FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX_RTR)
return true;
} else {
/* RX-FIFO is always RTR capable */
return true;
}
return false;
}
#endif /* _FLEXCAN_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7