Merge branch 'net-aquantia-implement-vlan-offloads'

Igor Russkikh says:

====================
net: aquantia: implement vlan offloads

This patchset introduces hardware VLAN offload support and also does some
maintenance: we replace driver version with uts version string, add
documentation file for atlantic driver, and update maintainers
adding Igor as a maintainer.

v3: shuffle doc sections, per Andrew's comments

v2: updates in doc, gpl spdx tag cleanup
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/networking/device_drivers/aquantia/atlantic.txt

+aQuantia AQtion Driver for the aQuantia Multi-Gigabit PCI Express Family of
+Ethernet Adapters
+=============================================================================
+
+Contents
+========
+
+- Identifying Your Adapter
+- Configuration
+- Supported ethtool options
+- Command Line Parameters
+- Config file parameters
+- Support
+- License
+
+Identifying Your Adapter
+========================
+
+The driver in this release is compatible with AQC-100, AQC-107, AQC-108 based ethernet adapters.
+
+
+SFP+ Devices (for AQC-100 based adapters)
+----------------------------------
+
+This release tested with passive Direct Attach Cables (DAC) and SFP+/LC Optical Transceiver.
+
+Configuration
+=========================
+  Viewing Link Messages
+  ---------------------
+  Link messages will not be displayed to the console if the distribution is
+  restricting system messages. In order to see network driver link messages on
+  your console, set dmesg to eight by entering the following:
+
+       dmesg -n 8
+
+  NOTE: This setting is not saved across reboots.
+
+  Jumbo Frames
+  ------------
+  The driver supports Jumbo Frames for all adapters. Jumbo Frames support is
+  enabled by changing the MTU to a value larger than the default of 1500.
+  The maximum value for the MTU is 16000.  Use the `ip` command to
+  increase the MTU size.  For example:
+
+        ip link set mtu 16000 dev enp1s0
+
+  ethtool
+  -------
+  The driver utilizes the ethtool interface for driver configuration and
+  diagnostics, as well as displaying statistical information. The latest
+  ethtool version is required for this functionality.
+
+  NAPI
+  ----
+  NAPI (Rx polling mode) is supported in the atlantic driver.
+
+Supported ethtool options
+============================
+ Viewing adapter settings
+ ---------------------
+ ethtool <ethX>
+
+ Output example:
+
+  Settings for enp1s0:
+    Supported ports: [ TP ]
+    Supported link modes:   100baseT/Full
+                            1000baseT/Full
+                            10000baseT/Full
+                            2500baseT/Full
+                            5000baseT/Full
+    Supported pause frame use: Symmetric
+    Supports auto-negotiation: Yes
+    Supported FEC modes: Not reported
+    Advertised link modes:  100baseT/Full
+                            1000baseT/Full
+                            10000baseT/Full
+                            2500baseT/Full
+                            5000baseT/Full
+    Advertised pause frame use: Symmetric
+    Advertised auto-negotiation: Yes
+    Advertised FEC modes: Not reported
+    Speed: 10000Mb/s
+    Duplex: Full
+    Port: Twisted Pair
+    PHYAD: 0
+    Transceiver: internal
+    Auto-negotiation: on
+    MDI-X: Unknown
+    Supports Wake-on: g
+    Wake-on: d
+    Link detected: yes
+
+ ---
+ Note: AQrate speeds (2.5/5 Gb/s) will be displayed only with linux kernels > 4.10.
+    But you can still use these speeds:
+	ethtool -s eth0 autoneg off speed 2500
+
+ Viewing adapter information
+ ---------------------
+ ethtool -i <ethX>
+
+ Output example:
+
+  driver: atlantic
+  version: 5.2.0-050200rc5-generic-kern
+  firmware-version: 3.1.78
+  expansion-rom-version:
+  bus-info: 0000:01:00.0
+  supports-statistics: yes
+  supports-test: no
+  supports-eeprom-access: no
+  supports-register-dump: yes
+  supports-priv-flags: no
+
+
+ Viewing Ethernet adapter statistics:
+ ---------------------
+ ethtool -S <ethX>
+
+ Output example:
+ NIC statistics:
+     InPackets: 13238607
+     InUCast: 13293852
+     InMCast: 52
+     InBCast: 3
+     InErrors: 0
+     OutPackets: 23703019
+     OutUCast: 23704941
+     OutMCast: 67
+     OutBCast: 11
+     InUCastOctects: 213182760
+     OutUCastOctects: 22698443
+     InMCastOctects: 6600
+     OutMCastOctects: 8776
+     InBCastOctects: 192
+     OutBCastOctects: 704
+     InOctects: 2131839552
+     OutOctects: 226938073
+     InPacketsDma: 95532300
+     OutPacketsDma: 59503397
+     InOctetsDma: 1137102462
+     OutOctetsDma: 2394339518
+     InDroppedDma: 0
+     Queue[0] InPackets: 23567131
+     Queue[0] OutPackets: 20070028
+     Queue[0] InJumboPackets: 0
+     Queue[0] InLroPackets: 0
+     Queue[0] InErrors: 0
+     Queue[1] InPackets: 45428967
+     Queue[1] OutPackets: 11306178
+     Queue[1] InJumboPackets: 0
+     Queue[1] InLroPackets: 0
+     Queue[1] InErrors: 0
+     Queue[2] InPackets: 3187011
+     Queue[2] OutPackets: 13080381
+     Queue[2] InJumboPackets: 0
+     Queue[2] InLroPackets: 0
+     Queue[2] InErrors: 0
+     Queue[3] InPackets: 23349136
+     Queue[3] OutPackets: 15046810
+     Queue[3] InJumboPackets: 0
+     Queue[3] InLroPackets: 0
+     Queue[3] InErrors: 0
+
+ Interrupt coalescing support
+ ---------------------------------
+ ITR mode, TX/RX coalescing timings could be viewed with:
+
+ ethtool -c <ethX>
+
+ and changed with:
+
+ ethtool -C <ethX> tx-usecs <usecs> rx-usecs <usecs>
+
+ To disable coalescing:
+
+ ethtool -C <ethX> tx-usecs 0 rx-usecs 0 tx-max-frames 1 tx-max-frames 1
+
+ Wake on LAN support
+ ---------------------------------
+
+ WOL support by magic packet:
+
+ ethtool -s <ethX> wol g
+
+ To disable WOL:
+
+ ethtool -s <ethX> wol d
+
+ Set and check the driver message level
+ ---------------------------------
+
+ Set message level
+
+ ethtool -s <ethX> msglvl <level>
+
+ Level values:
+
+ 0x0001 - general driver status.
+ 0x0002 - hardware probing.
+ 0x0004 - link state.
+ 0x0008 - periodic status check.
+ 0x0010 - interface being brought down.
+ 0x0020 - interface being brought up.
+ 0x0040 - receive error.
+ 0x0080 - transmit error.
+ 0x0200 - interrupt handling.
+ 0x0400 - transmit completion.
+ 0x0800 - receive completion.
+ 0x1000 - packet contents.
+ 0x2000 - hardware status.
+ 0x4000 - Wake-on-LAN status.
+
+ By default, the level of debugging messages is set 0x0001(general driver status).
+
+ Check message level
+
+ ethtool <ethX> | grep "Current message level"
+
+ If you want to disable the output of messages
+
+ ethtool -s <ethX> msglvl 0
+
+ RX flow rules (ntuple filters)
+ ---------------------------------
+ There are separate rules supported, that applies in that order:
+ 1. 16 VLAN ID rules
+ 2. 16 L2 EtherType rules
+ 3. 8 L3/L4 5-Tuple rules
+
+
+ The driver utilizes the ethtool interface for configuring ntuple filters,
+ via "ethtool -N <device> <filter>".
+
+ To enable or disable the RX flow rules:
+
+ ethtool -K ethX ntuple <on|off>
+
+ When disabling ntuple filters, all the user programed filters are
+ flushed from the driver cache and hardware. All needed filters must
+ be re-added when ntuple is re-enabled.
+
+ Because of the fixed order of the rules, the location of filters is also fixed:
+ - Locations 0 - 15 for VLAN ID filters
+ - Locations 16 - 31 for L2 EtherType filters
+ - Locations 32 - 39 for L3/L4 5-tuple filters (locations 32, 36 for IPv6)
+
+ The L3/L4 5-tuple (protocol, source and destination IP address, source and
+ destination TCP/UDP/SCTP port) is compared against 8 filters. For IPv4, up to
+ 8 source and destination addresses can be matched. For IPv6, up to 2 pairs of
+ addresses can be supported. Source and destination ports are only compared for
+ TCP/UDP/SCTP packets.
+
+ To add a filter that directs packet to queue 5, use <-N|-U|--config-nfc|--config-ntuple> switch:
+
+ ethtool -N <ethX> flow-type udp4 src-ip 10.0.0.1 dst-ip 10.0.0.2 src-port 2000 dst-port 2001 action 5 <loc 32>
+
+ - action is the queue number.
+ - loc is the rule number.
+
+ For "flow-type ip4|udp4|tcp4|sctp4|ip6|udp6|tcp6|sctp6" you must set the loc
+ number within 32 - 39.
+ For "flow-type ip4|udp4|tcp4|sctp4|ip6|udp6|tcp6|sctp6" you can set 8 rules
+ for traffic IPv4 or you can set 2 rules for traffic IPv6. Loc number traffic
+ IPv6 is 32 and 36.
+ At the moment you can not use IPv4 and IPv6 filters at the same time.
+
+ Example filter for IPv6 filter traffic:
+
+ sudo ethtool -N <ethX> flow-type tcp6 src-ip 2001:db8:0:f101::1 dst-ip 2001:db8:0:f101::2 action 1 loc 32
+ sudo ethtool -N <ethX> flow-type ip6 src-ip 2001:db8:0:f101::2 dst-ip 2001:db8:0:f101::5 action -1 loc 36
+
+ Example filter for IPv4 filter traffic:
+
+ sudo ethtool -N <ethX> flow-type udp4 src-ip 10.0.0.4 dst-ip 10.0.0.7 src-port 2000 dst-port 2001 loc 32
+ sudo ethtool -N <ethX> flow-type tcp4 src-ip 10.0.0.3 dst-ip 10.0.0.9 src-port 2000 dst-port 2001 loc 33
+ sudo ethtool -N <ethX> flow-type ip4 src-ip 10.0.0.6 dst-ip 10.0.0.4 loc 34
+
+ If you set action -1, then all traffic corresponding to the filter will be discarded.
+ The maximum value action is 31.
+
+
+ The VLAN filter (VLAN id) is compared against 16 filters.
+ VLAN id must be accompanied by mask 0xF000. That is to distinguish VLAN filter
+ from L2 Ethertype filter with UserPriority since both User Priority and VLAN ID
+ are passed in the same 'vlan' parameter.
+
+ To add a filter that directs packets from VLAN 2001 to queue 5:
+ ethtool -N <ethX> flow-type ip4 vlan 2001 m 0xF000 action 1 loc 0
+
+
+ L2 EtherType filters allows filter packet by EtherType field or both EtherType
+ and User Priority (PCP) field of 802.1Q.
+ UserPriority (vlan) parameter must be accompanied by mask 0x1FFF. That is to
+ distinguish VLAN filter from L2 Ethertype filter with UserPriority since both
+ User Priority and VLAN ID are passed in the same 'vlan' parameter.
+
+ To add a filter that directs IP4 packess of priority 3 to queue 3:
+ ethtool -N <ethX> flow-type ether proto 0x800 vlan 0x600 m 0x1FFF action 3 loc 16
+
+
+ To see the list of filters currently present:
+
+ ethtool <-u|-n|--show-nfc|--show-ntuple> <ethX>
+
+ Rules may be deleted from the table itself. This is done using:
+
+ sudo ethtool <-N|-U|--config-nfc|--config-ntuple> <ethX> delete <loc>
+
+ - loc is the rule number to be deleted.
+
+ Rx filters is an interface to load the filter table that funnels all flow
+ into queue 0 unless an alternative queue is specified using "action". In that
+ case, any flow that matches the filter criteria will be directed to the
+ appropriate queue. RX filters is supported on all kernels 2.6.30 and later.
+
+ RSS for UDP
+ ---------------------------------
+ Currently, NIC does not support RSS for fragmented IP packets, which leads to
+ incorrect working of RSS for fragmented UDP traffic. To disable RSS for UDP the
+ RX Flow L3/L4 rule may be used.
+
+ Example:
+ ethtool -N eth0 flow-type udp4 action 0 loc 32
+
+Command Line Parameters
+=======================
+The following command line parameters are available on atlantic driver:
+
+aq_itr -Interrupt throttling mode
+----------------------------------------
+Accepted values: 0, 1, 0xFFFF
+Default value: 0xFFFF
+0      - Disable interrupt throttling.
+1      - Enable interrupt throttling and use specified tx and rx rates.
+0xFFFF - Auto throttling mode. Driver will choose the best RX and TX
+         interrupt throtting settings based on link speed.
+
+aq_itr_tx - TX interrupt throttle rate
+----------------------------------------
+Accepted values: 0 - 0x1FF
+Default value: 0
+TX side throttling in microseconds. Adapter will setup maximum interrupt delay
+to this value. Minimum interrupt delay will be a half of this value
+
+aq_itr_rx - RX interrupt throttle rate
+----------------------------------------
+Accepted values: 0 - 0x1FF
+Default value: 0
+RX side throttling in microseconds. Adapter will setup maximum interrupt delay
+to this value. Minimum interrupt delay will be a half of this value
+
+Note: ITR settings could be changed in runtime by ethtool -c means (see below)
+
+Config file parameters
+=======================
+For some fine tuning and performance optimizations,
+some parameters can be changed in the {source_dir}/aq_cfg.h file.
+
+AQ_CFG_RX_PAGEORDER
+----------------------------------------
+Default value: 0
+RX page order override. Thats a power of 2 number of RX pages allocated for
+each descriptor. Received descriptor size is still limited by AQ_CFG_RX_FRAME_MAX.
+Increasing pageorder makes page reuse better (actual on iommu enabled systems).
+
+AQ_CFG_RX_REFILL_THRES
+----------------------------------------
+Default value: 32
+RX refill threshold. RX path will not refill freed descriptors until the
+specified number of free descriptors is observed. Larger values may help
+better page reuse but may lead to packet drops as well.
+
+AQ_CFG_VECS_DEF
+------------------------------------------------------------
+Number of queues
+Valid Range: 0 - 8 (up to AQ_CFG_VECS_MAX)
+Default value: 8
+Notice this value will be capped by the number of cores available on the system.
+
+AQ_CFG_IS_RSS_DEF
+------------------------------------------------------------
+Enable/disable Receive Side Scaling
+
+This feature allows the adapter to distribute receive processing
+across multiple CPU-cores and to prevent from overloading a single CPU core.
+
+Valid values
+0 - disabled
+1 - enabled
+
+Default value: 1
+
+AQ_CFG_NUM_RSS_QUEUES_DEF
+------------------------------------------------------------
+Number of queues for Receive Side Scaling
+Valid Range: 0 - 8 (up to AQ_CFG_VECS_DEF)
+
+Default value: AQ_CFG_VECS_DEF
+
+AQ_CFG_IS_LRO_DEF
+------------------------------------------------------------
+Enable/disable Large Receive Offload
+
+This offload enables the adapter to coalesce multiple TCP segments and indicate
+them as a single coalesced unit to the OS networking subsystem.
+The system consumes less energy but it also introduces more latency in packets processing.
+
+Valid values
+0 - disabled
+1 - enabled
+
+Default value: 1
+
+AQ_CFG_TX_CLEAN_BUDGET
+----------------------------------------
+Maximum descriptors to cleanup on TX at once.
+Default value: 256
+
+After the aq_cfg.h file changed the driver must be rebuilt to take effect.
+
+Support
+=======
+
+If an issue is identified with the released source code on the supported
+kernel with a supported adapter, email the specific information related
+to the issue to support@aquantia.com
+
+License
+=======
+
+aQuantia Corporation Network Driver
+Copyright(c) 2014 - 2019 aQuantia Corporation.
+
+This program is free software; you can redistribute it and/or modify it
+under the terms and conditions of the GNU General Public License,
+version 2, as published by the Free Software Foundation.

MAINTAINERS

@@ -1140,6 +1140,15 @@ L:	linux-media@vger.kernel.org
 S:	Maintained
 F:	drivers/media/i2c/aptina-pll.*
 
+AQUANTIA ETHERNET DRIVER (atlantic)
+M:	Igor Russkikh <igor.russkikh@aquantia.com>
+L:	netdev@vger.kernel.org
+S:	Supported
+W:	http://www.aquantia.com
+Q:	http://patchwork.ozlabs.org/project/netdev/list/
+F:	drivers/net/ethernet/aquantia/atlantic/
+F:	Documentation/networking/device_drivers/aquantia/atlantic.txt
+
 ARC FRAMEBUFFER DRIVER
 M:	Jaya Kumar <jayalk@intworks.biz>
 S:	Maintained

drivers/net/ethernet/aquantia/atlantic/aq_cfg.h

@@ -9,6 +9,8 @@
 #ifndef AQ_CFG_H
 #define AQ_CFG_H
 
+#include <generated/utsrelease.h>
+
 #define AQ_CFG_VECS_DEF   8U
 #define AQ_CFG_TCS_DEF    1U
 
@@ -86,10 +88,7 @@
 #define AQ_CFG_DRV_AUTHOR      "aQuantia"
 #define AQ_CFG_DRV_DESC        "aQuantia Corporation(R) Network Driver"
 #define AQ_CFG_DRV_NAME        "atlantic"
-#define AQ_CFG_DRV_VERSION	__stringify(NIC_MAJOR_DRIVER_VERSION)"."\
-				__stringify(NIC_MINOR_DRIVER_VERSION)"."\
-				__stringify(NIC_BUILD_DRIVER_VERSION)"."\
-				__stringify(NIC_REVISION_DRIVER_VERSION) \
+#define AQ_CFG_DRV_VERSION	UTS_RELEASE \
 				AQ_CFG_DRV_VERSION_SUFFIX
 
 #endif /* AQ_CFG_H */

drivers/net/ethernet/aquantia/atlantic/aq_drvinfo.c

-// SPDX-License-Identifier: GPL-2.0-or-later
+// SPDX-License-Identifier: GPL-2.0-only
 /* Copyright (C) 2014-2019 aQuantia Corporation. */
 
 /* File aq_drvinfo.c: Definition of common code for firmware info in sys.*/

drivers/net/ethernet/aquantia/atlantic/aq_drvinfo.h

-/* SPDX-License-Identifier: GPL-2.0-or-later */
+/* SPDX-License-Identifier: GPL-2.0-only */
 /* Copyright (C) 2014-2017 aQuantia Corporation. */
 
 /* File aq_drvinfo.h: Declaration of common code for firmware info in sys.*/

drivers/net/ethernet/aquantia/atlantic/aq_filters.c

-// SPDX-License-Identifier: GPL-2.0-or-later
+// SPDX-License-Identifier: GPL-2.0-only
 /* Copyright (C) 2014-2017 aQuantia Corporation. */
 
 /* File aq_filters.c: RX filters related functions. */

drivers/net/ethernet/aquantia/atlantic/aq_filters.h

-/* SPDX-License-Identifier: GPL-2.0-or-later */
+/* SPDX-License-Identifier: GPL-2.0-only */
 /* Copyright (C) 2014-2017 aQuantia Corporation. */
 
 /* File aq_filters.h: RX filters related functions. */

drivers/net/ethernet/aquantia/atlantic/aq_main.c

@@ -108,11 +108,16 @@ static int aq_ndev_change_mtu(struct net_device *ndev, int new_mtu)
 static int aq_ndev_set_features(struct net_device *ndev,
 				netdev_features_t features)
 {
+	bool is_vlan_rx_strip = !!(features & NETIF_F_HW_VLAN_CTAG_RX);
+	bool is_vlan_tx_insert = !!(features & NETIF_F_HW_VLAN_CTAG_TX);
 	struct aq_nic_s *aq_nic = netdev_priv(ndev);
-	struct aq_nic_cfg_s *aq_cfg = aq_nic_get_cfg(aq_nic);
+	bool need_ndev_restart = false;
+	struct aq_nic_cfg_s *aq_cfg;
 	bool is_lro = false;
 	int err = 0;
 
+	aq_cfg = aq_nic_get_cfg(aq_nic);
+
 	if (!(features & NETIF_F_NTUPLE)) {
 		if (aq_nic->ndev->features & NETIF_F_NTUPLE) {
 			err = aq_clear_rxnfc_all_rules(aq_nic);
@@ -135,17 +140,32 @@ static int aq_ndev_set_features(struct net_device *ndev,
 
 		if (aq_cfg->is_lro != is_lro) {
 			aq_cfg->is_lro = is_lro;
-
-			if (netif_running(ndev)) {
-				aq_ndev_close(ndev);
-				aq_ndev_open(ndev);
-			}
+			need_ndev_restart = true;
 		}
 	}
-	if ((aq_nic->ndev->features ^ features) & NETIF_F_RXCSUM)
+
+	if ((aq_nic->ndev->features ^ features) & NETIF_F_RXCSUM) {
 		err = aq_nic->aq_hw_ops->hw_set_offload(aq_nic->aq_hw,
 							aq_cfg);
 
+		if (unlikely(err))
+			goto err_exit;
+	}
+
+	if (aq_cfg->is_vlan_rx_strip != is_vlan_rx_strip) {
+		aq_cfg->is_vlan_rx_strip = is_vlan_rx_strip;
+		need_ndev_restart = true;
+	}
+	if (aq_cfg->is_vlan_tx_insert != is_vlan_tx_insert) {
+		aq_cfg->is_vlan_tx_insert = is_vlan_tx_insert;
+		need_ndev_restart = true;
+	}
+
+	if (need_ndev_restart && netif_running(ndev)) {
+		aq_ndev_close(ndev);
+		aq_ndev_open(ndev);
+	}
+
 err_exit:
 	return err;
 }

drivers/net/ethernet/aquantia/atlantic/aq_nic.c

@@ -126,6 +126,8 @@ void aq_nic_cfg_start(struct aq_nic_s *self)
 
 	cfg->link_speed_msk &= cfg->aq_hw_caps->link_speed_msk;
 	cfg->features = cfg->aq_hw_caps->hw_features;
+	cfg->is_vlan_rx_strip = !!(cfg->features & NETIF_F_HW_VLAN_CTAG_RX);
+	cfg->is_vlan_tx_insert = !!(cfg->features & NETIF_F_HW_VLAN_CTAG_TX);
 }
 
 static int aq_nic_update_link_status(struct aq_nic_s *self)
@@ -285,7 +287,8 @@ void aq_nic_ndev_init(struct aq_nic_s *self)
 	self->ndev->hw_features |= aq_hw_caps->hw_features;
 	self->ndev->features = aq_hw_caps->hw_features;
 	self->ndev->vlan_features |= NETIF_F_HW_CSUM | NETIF_F_RXCSUM |
-				     NETIF_F_RXHASH | NETIF_F_SG | NETIF_F_LRO;
+				     NETIF_F_RXHASH | NETIF_F_SG |
+				     NETIF_F_LRO | NETIF_F_TSO;
 	self->ndev->priv_flags = aq_hw_caps->hw_priv_flags;
 	self->ndev->priv_flags |= IFF_LIVE_ADDR_CHANGE;
 
@@ -426,26 +429,37 @@ static unsigned int aq_nic_map_skb(struct aq_nic_s *self,
 	unsigned int dx = ring->sw_tail;
 	struct aq_ring_buff_s *first = NULL;
 	struct aq_ring_buff_s *dx_buff = &ring->buff_ring[dx];
+	bool need_context_tag = false;
 
-	if (unlikely(skb_is_gso(skb))) {
 	dx_buff->flags = 0U;
+
+	if (unlikely(skb_is_gso(skb))) {
+		dx_buff->mss = skb_shinfo(skb)->gso_size;
+		dx_buff->is_gso = 1U;
 		dx_buff->len_pkt = skb->len;
 		dx_buff->len_l2 = ETH_HLEN;
 		dx_buff->len_l3 = ip_hdrlen(skb);
 		dx_buff->len_l4 = tcp_hdrlen(skb);
-		dx_buff->mss = skb_shinfo(skb)->gso_size;
-		dx_buff->is_txc = 1U;
 		dx_buff->eop_index = 0xffffU;
-
 		dx_buff->is_ipv6 =
 			(ip_hdr(skb)->version == 6) ? 1U : 0U;
+		need_context_tag = true;
+	}
+
+	if (self->aq_nic_cfg.is_vlan_tx_insert && skb_vlan_tag_present(skb)) {
+		dx_buff->vlan_tx_tag = skb_vlan_tag_get(skb);
+		dx_buff->len_pkt = skb->len;
+		dx_buff->is_vlan = 1U;
+		need_context_tag = true;
+	}
 
+	if (need_context_tag) {
 		dx = aq_ring_next_dx(ring, dx);
 		dx_buff = &ring->buff_ring[dx];
+		dx_buff->flags = 0U;
 		++ret;
 	}
 
-	dx_buff->flags = 0U;
 	dx_buff->len = skb_headlen(skb);
 	dx_buff->pa = dma_map_single(aq_nic_get_dev(self),
 				     skb->data,
@@ -534,7 +548,7 @@ static unsigned int aq_nic_map_skb(struct aq_nic_s *self,
 	     --ret, dx = aq_ring_next_dx(ring, dx)) {
 		dx_buff = &ring->buff_ring[dx];
 
-		if (!dx_buff->is_txc && dx_buff->pa) {
+		if (!dx_buff->is_gso && !dx_buff->is_vlan && dx_buff->pa) {
 			if (unlikely(dx_buff->is_sop)) {
 				dma_unmap_single(aq_nic_get_dev(self),
 						 dx_buff->pa,

drivers/net/ethernet/aquantia/atlantic/aq_nic.h

@@ -35,6 +35,8 @@ struct aq_nic_cfg_s {
 	u32 flow_control;
 	u32 link_speed_msk;
 	u32 wol;
+	u8 is_vlan_rx_strip;
+	u8 is_vlan_tx_insert;
 	u16 is_mc_list_enabled;
 	u16 mc_list_count;
 	bool is_autoneg;

drivers/net/ethernet/aquantia/atlantic/aq_ring.c

@@ -409,6 +409,10 @@ int aq_ring_rx_clean(struct aq_ring_s *self,
 			}
 		}
 
+		if (buff->is_vlan)
+			__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
+					       buff->vlan_rx_tag);
+
 		skb->protocol = eth_type_trans(skb, ndev);
 
 		aq_rx_checksum(self, buff, skb);

drivers/net/ethernet/aquantia/atlantic/aq_ring.h

@@ -27,7 +27,7 @@ struct aq_rxpage {
  *         +----------+----------+----------+-----------
  * 4/8bytes|len pkt   |len pkt   |          | skb
  *         +----------+----------+----------+-----------
- * 4/8bytes|is_txc    |len,flags |len       |len,is_eop
+ * 4/8bytes|is_gso    |len,flags |len       |len,is_eop
  *         +----------+----------+----------+-----------
  *
  *  This aq_ring_buff_s doesn't have endianness dependency.
@@ -44,6 +44,7 @@ struct __packed aq_ring_buff_s {
 			u8 is_hash_l4;
 			u8 rsvd1;
 			struct aq_rxpage rxdata;
+			u16 vlan_rx_tag;
 		};
 		/* EOP */
 		struct {
@@ -59,6 +60,7 @@ struct __packed aq_ring_buff_s {
 			u8 is_ipv6:1;
 			u8 rsvd2:7;
 			u32 len_pkt;
+			u16 vlan_tx_tag;
 		};
 	};
 	union {
@@ -70,11 +72,12 @@ struct __packed aq_ring_buff_s {
 			u32 is_cso_err:1;
 			u32 is_sop:1;
 			u32 is_eop:1;
-			u32 is_txc:1;
+			u32 is_gso:1;
 			u32 is_mapped:1;
 			u32 is_cleaned:1;
 			u32 is_error:1;
-			u32 rsvd3:6;
+			u32 is_vlan:1;
+			u32 rsvd3:5;
 			u16 eop_index;
 			u16 rsvd4;
 		};

drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c

@@ -451,7 +451,7 @@ static int hw_atl_a0_hw_ring_tx_xmit(struct aq_hw_s *self,
 
 		buff = &ring->buff_ring[ring->sw_tail];
 
-		if (buff->is_txc) {
+		if (buff->is_gso) {
 			txd->ctl |= (buff->len_l3 << 31) |
 				(buff->len_l2 << 24) |
 				HW_ATL_A0_TXD_CTL_CMD_TCP |

drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c

@@ -40,7 +40,9 @@
 			NETIF_F_TSO |     \
 			NETIF_F_LRO |     \
 			NETIF_F_NTUPLE |  \
-			NETIF_F_HW_VLAN_CTAG_FILTER, \
+			NETIF_F_HW_VLAN_CTAG_FILTER | \
+			NETIF_F_HW_VLAN_CTAG_RX |     \
+			NETIF_F_HW_VLAN_CTAG_TX,      \
 	.hw_priv_flags = IFF_UNICAST_FLT, \
 	.flow_control = true,		  \
 	.mtu = HW_ATL_B0_MTU_JUMBO,	  \
@@ -245,6 +247,9 @@ static int hw_atl_b0_hw_offload_set(struct aq_hw_s *self,
 	/* LSO offloads*/
 	hw_atl_tdm_large_send_offload_en_set(self, 0xFFFFFFFFU);
 
+	/* Outer VLAN tag offload */
+	hw_atl_rpo_outer_vlan_tag_mode_set(self, 1U);
+
 /* LRO offloads */
 	{
 		unsigned int val = (8U < HW_ATL_B0_LRO_RXD_MAX) ? 0x3U :
@@ -487,6 +492,7 @@ static int hw_atl_b0_hw_ring_tx_xmit(struct aq_hw_s *self,
 	unsigned int buff_pa_len = 0U;
 	unsigned int pkt_len = 0U;
 	unsigned int frag_count = 0U;
+	bool is_vlan = false;
 	bool is_gso = false;
 
 	buff = &ring->buff_ring[ring->sw_tail];
@@ -501,36 +507,44 @@ static int hw_atl_b0_hw_ring_tx_xmit(struct aq_hw_s *self,
 
 		buff = &ring->buff_ring[ring->sw_tail];
 
-		if (buff->is_txc) {
+		if (buff->is_gso) {
+			txd->ctl |= HW_ATL_B0_TXD_CTL_CMD_TCP;
+			txd->ctl |= HW_ATL_B0_TXD_CTL_DESC_TYPE_TXC;
 			txd->ctl |= (buff->len_l3 << 31) |
-				(buff->len_l2 << 24) |
-				HW_ATL_B0_TXD_CTL_CMD_TCP |
-				HW_ATL_B0_TXD_CTL_DESC_TYPE_TXC;
-			txd->ctl2 |= (buff->mss << 16) |
-				(buff->len_l4 << 8) |
-				(buff->len_l3 >> 1);
+				    (buff->len_l2 << 24);
+			txd->ctl2 |= (buff->mss << 16);
+			is_gso = true;
 
 			pkt_len -= (buff->len_l4 +
 				    buff->len_l3 +
 				    buff->len_l2);
-			is_gso = true;
-
 			if (buff->is_ipv6)
 				txd->ctl |= HW_ATL_B0_TXD_CTL_CMD_IPV6;
-		} else {
+			txd->ctl2 |= (buff->len_l4 << 8) |
+				     (buff->len_l3 >> 1);
+		}
+		if (buff->is_vlan) {
+			txd->ctl |= HW_ATL_B0_TXD_CTL_DESC_TYPE_TXC;
+			txd->ctl |= buff->vlan_tx_tag << 4;
+			is_vlan = true;
+		}
+		if (!buff->is_gso && !buff->is_vlan) {
 			buff_pa_len = buff->len;
 
 			txd->buf_addr = buff->pa;
 			txd->ctl |= (HW_ATL_B0_TXD_CTL_BLEN &
 						((u32)buff_pa_len << 4));
 			txd->ctl |= HW_ATL_B0_TXD_CTL_DESC_TYPE_TXD;
+
 			/* PAY_LEN */
 			txd->ctl2 |= HW_ATL_B0_TXD_CTL2_LEN & (pkt_len << 14);
 
-			if (is_gso) {
-				txd->ctl |= HW_ATL_B0_TXD_CTL_CMD_LSO;
+			if (is_gso || is_vlan) {
+				/* enable tx context */
 				txd->ctl2 |= HW_ATL_B0_TXD_CTL2_CTX_EN;
 			}
+			if (is_gso)
+				txd->ctl |= HW_ATL_B0_TXD_CTL_CMD_LSO;
 
 			/* Tx checksum offloads */
 			if (buff->is_ip_cso)
@@ -539,13 +553,16 @@ static int hw_atl_b0_hw_ring_tx_xmit(struct aq_hw_s *self,
 			if (buff->is_udp_cso || buff->is_tcp_cso)
 				txd->ctl |= HW_ATL_B0_TXD_CTL_CMD_TUCSO;
 
+			if (is_vlan)
+				txd->ctl |= HW_ATL_B0_TXD_CTL_CMD_VLAN;
+
 			if (unlikely(buff->is_eop)) {
 				txd->ctl |= HW_ATL_B0_TXD_CTL_EOP;
 				txd->ctl |= HW_ATL_B0_TXD_CTL_CMD_WB;
 				is_gso = false;
+				is_vlan = false;
 			}
 		}
-
 		ring->sw_tail = aq_ring_next_dx(ring, ring->sw_tail);
 	}
 
@@ -559,6 +576,7 @@ static int hw_atl_b0_hw_ring_rx_init(struct aq_hw_s *self,
 {
 	u32 dma_desc_addr_lsw = (u32)aq_ring->dx_ring_pa;
 	u32 dma_desc_addr_msw = (u32)(((u64)aq_ring->dx_ring_pa) >> 32);
+	u32 vlan_rx_stripping = self->aq_nic_cfg->is_vlan_rx_strip;
 
 	hw_atl_rdm_rx_desc_en_set(self, false, aq_ring->idx);
 
@@ -578,7 +596,8 @@ static int hw_atl_b0_hw_ring_rx_init(struct aq_hw_s *self,
 
 	hw_atl_rdm_rx_desc_head_buff_size_set(self, 0U, aq_ring->idx);
 	hw_atl_rdm_rx_desc_head_splitting_set(self, 0U, aq_ring->idx);
-	hw_atl_rpo_rx_desc_vlan_stripping_set(self, 0U, aq_ring->idx);
+	hw_atl_rpo_rx_desc_vlan_stripping_set(self, !!vlan_rx_stripping,
+					      aq_ring->idx);
 
 	/* Rx ring set mode */
 
@@ -681,11 +700,15 @@ static int hw_atl_b0_hw_ring_rx_receive(struct aq_hw_s *self,
 
 		buff = &ring->buff_ring[ring->hw_head];
 
+		buff->flags = 0U;
+		buff->is_hash_l4 = 0U;
+
 		rx_stat = (0x0000003CU & rxd_wb->status) >> 2;
 
 		is_rx_check_sum_enabled = (rxd_wb->type >> 19) & 0x3U;
 
-		pkt_type = 0xFFU & (rxd_wb->type >> 4);
+		pkt_type = (rxd_wb->type & HW_ATL_B0_RXD_WB_STAT_PKTTYPE) >>
+			   HW_ATL_B0_RXD_WB_STAT_PKTTYPE_SHIFT;
 
 		if (is_rx_check_sum_enabled & BIT(0) &&
 		    (0x0U == (pkt_type & 0x3U)))
@@ -706,6 +729,13 @@ static int hw_atl_b0_hw_ring_rx_receive(struct aq_hw_s *self,
 			buff->is_cso_err = 0U;
 		}
 
+		if (self->aq_nic_cfg->is_vlan_rx_strip &&
+		    ((pkt_type & HW_ATL_B0_RXD_WB_PKTTYPE_VLAN) ||
+		     (pkt_type & HW_ATL_B0_RXD_WB_PKTTYPE_VLAN_DOUBLE))) {
+			buff->is_vlan = 1;
+			buff->vlan_rx_tag = le16_to_cpu(rxd_wb->vlan);
+		}
+
 		if ((rx_stat & BIT(0)) || rxd_wb->type & 0x1000U) {
 			/* MAC error or DMA error */
 			buff->is_error = 1U;

drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0_internal.h

@@ -107,10 +107,17 @@
 #define HW_ATL_B0_RXD_NCEA0 (0x1)
 
 #define HW_ATL_B0_RXD_WB_STAT_RSSTYPE (0x0000000F)
+#define HW_ATL_B0_RXD_WB_STAT_RSSTYPE_SHIFT (0x0)
 #define HW_ATL_B0_RXD_WB_STAT_PKTTYPE (0x00000FF0)
+#define HW_ATL_B0_RXD_WB_STAT_PKTTYPE_SHIFT (0x4)
 #define HW_ATL_B0_RXD_WB_STAT_RXCTRL  (0x00180000)
+#define HW_ATL_B0_RXD_WB_STAT_RXCTRL_SHIFT (0x13)
 #define HW_ATL_B0_RXD_WB_STAT_SPLHDR  (0x00200000)
 #define HW_ATL_B0_RXD_WB_STAT_HDRLEN  (0xFFC00000)
+#define HW_ATL_B0_RXD_WB_STAT_HDRLEN_SHIFT (0x16)
+
+#define HW_ATL_B0_RXD_WB_PKTTYPE_VLAN          BIT(5)
+#define HW_ATL_B0_RXD_WB_PKTTYPE_VLAN_DOUBLE   BIT(6)
 
 #define HW_ATL_B0_RXD_WB_STAT2_DD      (0x0001)
 #define HW_ATL_B0_RXD_WB_STAT2_EOP     (0x0002)

drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c

@@ -1004,6 +1004,22 @@ void hw_atl_rpo_rx_desc_vlan_stripping_set(struct aq_hw_s *aq_hw,
 			    rx_desc_vlan_stripping);
 }
 
+void hw_atl_rpo_outer_vlan_tag_mode_set(void *context,
+					u32 outervlantagmode)
+{
+	aq_hw_write_reg_bit(context, HW_ATL_RPO_OUTER_VL_INS_MODE_ADR,
+			    HW_ATL_RPO_OUTER_VL_INS_MODE_MSK,
+			    HW_ATL_RPO_OUTER_VL_INS_MODE_SHIFT,
+			    outervlantagmode);
+}
+
+u32 hw_atl_rpo_outer_vlan_tag_mode_get(void *context)
+{
+	return aq_hw_read_reg_bit(context, HW_ATL_RPO_OUTER_VL_INS_MODE_ADR,
+				  HW_ATL_RPO_OUTER_VL_INS_MODE_MSK,
+				  HW_ATL_RPO_OUTER_VL_INS_MODE_SHIFT);
+}
+
 void hw_atl_rpo_tcp_udp_crc_offload_en_set(struct aq_hw_s *aq_hw,
 					   u32 tcp_udp_crc_offload_en)
 {

drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h

@@ -488,6 +488,11 @@ void hw_atl_rpo_rx_desc_vlan_stripping_set(struct aq_hw_s *aq_hw,
 					   u32 rx_desc_vlan_stripping,
 					   u32 descriptor);
 
+void hw_atl_rpo_outer_vlan_tag_mode_set(void *context,
+					u32 outervlantagmode);
+
+u32 hw_atl_rpo_outer_vlan_tag_mode_get(void *context);
+
 /* set tcp/udp checksum offload enable */
 void hw_atl_rpo_tcp_udp_crc_offload_en_set(struct aq_hw_s *aq_hw,
 					   u32 tcp_udp_crc_offload_en);

drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h

@@ -1383,6 +1383,24 @@
 /* default value of bitfield l4_chk_en */
 #define HW_ATL_RPOL4CHK_EN_DEFAULT 0x0
 
+/* RX outer_vl_ins_mode Bitfield Definitions
+ * Preprocessor definitions for the bitfield "outer_vl_ins_mode".
+ * PORT="pif_rpo_outer_vl_mode_i"
+ */
+
+/* Register address for bitfield outer_vl_ins_mode */
+#define HW_ATL_RPO_OUTER_VL_INS_MODE_ADR 0x00005580
+/* Bitmask for bitfield outer_vl_ins_mode */
+#define HW_ATL_RPO_OUTER_VL_INS_MODE_MSK 0x00000004
+/* Inverted bitmask for bitfield outer_vl_ins_mode */
+#define HW_ATL_RPO_OUTER_VL_INS_MODE_MSKN 0xFFFFFFFB
+/* Lower bit position of bitfield outer_vl_ins_mode */
+#define HW_ATL_RPO_OUTER_VL_INS_MODE_SHIFT 2
+/* Width of bitfield outer_vl_ins_mode */
+#define HW_ATL_RPO_OUTER_VL_INS_MODE_WIDTH 1
+/* Default value of bitfield outer_vl_ins_mode */
+#define HW_ATL_RPO_OUTER_VL_INS_MODE_DEFAULT 0x0
+
 /* rx reg_res_dsbl bitfield definitions
  * preprocessor definitions for the bitfield "reg_res_dsbl".
  * port="pif_rx_reg_res_dsbl_i"

drivers/net/ethernet/aquantia/atlantic/ver.h

@@ -7,11 +7,6 @@
 #ifndef VER_H
 #define VER_H
 
-#define NIC_MAJOR_DRIVER_VERSION           2
-#define NIC_MINOR_DRIVER_VERSION           0
-#define NIC_BUILD_DRIVER_VERSION           4
-#define NIC_REVISION_DRIVER_VERSION        0
-
 #define AQ_CFG_DRV_VERSION_SUFFIX "-kern"
 
 #endif /* VER_H */