MIPS: Netlogic: Add XLP makefiles and config

- Add CPU_XLP and NLM_XLR_BOARD to arch/mips/Kconfig for Netlogic XLP boards
- Update mips Makefiles to add XLP
Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2968/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/Kconfig

@@ -783,6 +783,33 @@ config NLM_XLR_BOARD
 	  Support for systems based on Netlogic XLR and XLS processors.
 	  Say Y here if you have a XLR or XLS based board.
 
+config NLM_XLP_BOARD
+	bool "Netlogic XLP based systems"
+	depends on EXPERIMENTAL
+	select BOOT_ELF32
+	select NLM_COMMON
+	select SYS_HAS_CPU_XLP
+	select SYS_SUPPORTS_SMP
+	select HW_HAS_PCI
+	select SWAP_IO_SPACE
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select 64BIT_PHYS_ADDR
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select DMA_COHERENT
+	select NR_CPUS_DEFAULT_32
+	select CEVT_R4K
+	select CSRC_R4K
+	select IRQ_CPU
+	select ZONE_DMA if 64BIT
+	select SYNC_R4K
+	select SYS_HAS_EARLY_PRINTK
+	help
+	  This board is based on Netlogic XLP Processor.
+	  Say Y here if you have a XLP based board.
+
 endchoice
 
 source "arch/mips/alchemy/Kconfig"
@@ -1472,6 +1499,19 @@ config CPU_XLR
 	select CPU_SUPPORTS_HUGEPAGES
 	help
 	  Netlogic Microsystems XLR/XLS processors.
+
+config CPU_XLP
+	bool "Netlogic XLP SoC"
+	depends on SYS_HAS_CPU_XLP
+	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
+	select CPU_HAS_LLSC
+	select WEAK_ORDERING
+	select WEAK_REORDERING_BEYOND_LLSC
+	select CPU_HAS_PREFETCH
+	help
+	  Netlogic Microsystems XLP processors.
 endchoice
 
 if CPU_LOONGSON2F
@@ -1605,6 +1645,9 @@ config SYS_HAS_CPU_BMIPS5000
 config SYS_HAS_CPU_XLR
 	bool
 
+config SYS_HAS_CPU_XLP
+	bool
+
 #
 # CPU may reorder R->R, R->W, W->R, W->W
 # Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC

arch/mips/kernel/Makefile

@@ -55,6 +55,7 @@ obj-$(CONFIG_CPU_TX49XX)	+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_VR41XX)	+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= octeon_switch.o
 obj-$(CONFIG_CPU_XLR)		+= r4k_fpu.o r4k_switch.o
+obj-$(CONFIG_CPU_XLP)		+= r4k_fpu.o r4k_switch.o
 
 obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_SMP_UP)		+= smp-up.o

arch/mips/lib/Makefile

@@ -29,6 +29,7 @@ obj-$(CONFIG_CPU_TX49XX)	+= dump_tlb.o
 obj-$(CONFIG_CPU_VR41XX)	+= dump_tlb.o
 obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= dump_tlb.o
 obj-$(CONFIG_CPU_XLR)		+= dump_tlb.o
+obj-$(CONFIG_CPU_XLP)		+= dump_tlb.o
 
 # libgcc-style stuff needed in the kernel
 obj-y += ashldi3.o ashrdi3.o cmpdi2.o lshrdi3.o ucmpdi2.o

arch/mips/mm/Makefile

@@ -31,6 +31,7 @@ obj-$(CONFIG_CPU_TX49XX)	+= c-r4k.o cex-gen.o tlb-r4k.o
 obj-$(CONFIG_CPU_VR41XX)	+= c-r4k.o cex-gen.o tlb-r4k.o
 obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= c-octeon.o cex-oct.o tlb-r4k.o
 obj-$(CONFIG_CPU_XLR)		+= c-r4k.o tlb-r4k.o cex-gen.o
+obj-$(CONFIG_CPU_XLP)		+= c-r4k.o tlb-r4k.o cex-gen.o
 
 obj-$(CONFIG_IP22_CPU_SCACHE)	+= sc-ip22.o
 obj-$(CONFIG_R5000_CPU_SCACHE)  += sc-r5k.o

arch/mips/netlogic/Makefile

 obj-$(CONFIG_NLM_COMMON)	+=	common/
 obj-$(CONFIG_CPU_XLR)		+=	xlr/
+obj-$(CONFIG_CPU_XLP)		+=	xlp/

arch/mips/netlogic/Platform

@@ -8,6 +8,7 @@ cflags-$(CONFIG_NLM_COMMON)	+= -I$(srctree)/arch/mips/include/asm/netlogic
 # use mips64 if xlr is not available
 #
 cflags-$(CONFIG_CPU_XLR)	+= $(call cc-option,-march=xlr,-march=mips64)
+cflags-$(CONFIG_CPU_XLP)	+= $(call cc-option,-march=xlp,-march=mips64r2)
 
 #
 # NETLOGIC processor support

arch/mips/netlogic/xlp/Makefile

+obj-y				+= setup.o platform.o nlm_hal.o
+obj-$(CONFIG_SMP)		+= smpboot.o wakeup.o