mac80211: allow setting spatial reuse parameters from bss_conf

Store the OBSS PD parameters inside bss_conf when bringing up an AP and/or
when a station connects to an AP. This allows the driver to configure the
HW accordingly.
Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/20190730163701.18836-3-john@phrozen.orgSigned-off-by: Johannes Berg <johannes.berg@intel.com>

include/net/mac80211.h

@@ -315,6 +315,7 @@ struct ieee80211_vif_chanctx_switch {
  * @BSS_CHANGED_FTM_RESPONDER: fime timing reasurement request responder
  *	functionality changed for this BSS (AP mode).
  * @BSS_CHANGED_TWT: TWT status changed
+ * @BSS_CHANGED_HE_OBSS_PD: OBSS Packet Detection status changed.
  *
  */
 enum ieee80211_bss_change {
@@ -346,6 +347,7 @@ enum ieee80211_bss_change {
 	BSS_CHANGED_MCAST_RATE		= 1<<25,
 	BSS_CHANGED_FTM_RESPONDER	= 1<<26,
 	BSS_CHANGED_TWT			= 1<<27,
+	BSS_CHANGED_HE_OBSS_PD		= 1<<28,
 
 	/* when adding here, make sure to change ieee80211_reconfig */
 };
@@ -601,6 +603,7 @@ struct ieee80211_ftm_responder_params {
  * @profile_periodicity: the least number of beacon frames need to be received
  *	in order to discover all the nontransmitted BSSIDs in the set.
  * @he_operation: HE operation information of the AP we are connected to
+ * @he_obss_pd: OBSS Packet Detection parameters.
  */
 struct ieee80211_bss_conf {
 	const u8 *bssid;
@@ -663,6 +666,7 @@ struct ieee80211_bss_conf {
 	bool ema_ap;
 	u8 profile_periodicity;
 	struct ieee80211_he_operation he_operation;
+	struct ieee80211_he_obss_pd he_obss_pd;
 };
 
 /**

net/mac80211/cfg.c

@@ -980,7 +980,8 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
 		      BSS_CHANGED_SSID |
 		      BSS_CHANGED_P2P_PS |
 		      BSS_CHANGED_TXPOWER |
-		      BSS_CHANGED_TWT;
+		      BSS_CHANGED_TWT |
+		      BSS_CHANGED_HE_OBSS_PD;
 	int err;
 	int prev_beacon_int;
 
@@ -1051,6 +1052,8 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
 	sdata->vif.bss_conf.enable_beacon = true;
 	sdata->vif.bss_conf.allow_p2p_go_ps = sdata->vif.p2p;
 	sdata->vif.bss_conf.twt_responder = params->twt_responder;
+	memcpy(&sdata->vif.bss_conf.he_obss_pd, &params->he_obss_pd,
+	       sizeof(struct ieee80211_he_obss_pd));
 
 	sdata->vif.bss_conf.ssid_len = params->ssid_len;
 	if (params->ssid_len)

net/mac80211/he.c

@@ -65,3 +65,27 @@ ieee80211_he_op_ie_to_bss_conf(struct ieee80211_vif *vif,
 
 	vif->bss_conf.he_operation = *he_op_ie_elem;
 }
+
+void
+ieee80211_he_spr_ie_to_bss_conf(struct ieee80211_vif *vif,
+				const struct ieee80211_he_spr *he_spr_ie_elem)
+{
+	struct ieee80211_he_obss_pd *he_obss_pd =
+					&vif->bss_conf.he_obss_pd;
+	const u8 *data = he_spr_ie_elem->optional;
+
+	memset(he_obss_pd, 0, sizeof(*he_obss_pd));
+
+	if (!he_spr_ie_elem)
+		return;
+
+	if (he_spr_ie_elem->he_sr_control &
+	    IEEE80211_HE_SPR_NON_SRG_OFFSET_PRESENT)
+		data++;
+	if (he_spr_ie_elem->he_sr_control &
+	    IEEE80211_HE_SPR_SRG_INFORMATION_PRESENT) {
+		he_obss_pd->max_offset = *data++;
+		he_obss_pd->min_offset = *data++;
+		he_obss_pd->enable = true;
+	}
+}

net/mac80211/ieee80211_i.h

@@ -1873,6 +1873,9 @@ ieee80211_he_cap_ie_to_sta_he_cap(struct ieee80211_sub_if_data *sdata,
 				  struct ieee80211_supported_band *sband,
 				  const u8 *he_cap_ie, u8 he_cap_len,
 				  struct sta_info *sta);
+void
+ieee80211_he_spr_ie_to_bss_conf(struct ieee80211_vif *vif,
+				const struct ieee80211_he_spr *he_spr_ie_elem);
 
 void
 ieee80211_he_op_ie_to_bss_conf(struct ieee80211_vif *vif,

net/mac80211/mlme.c

@@ -3382,6 +3382,7 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
 			bss_conf->uora_ocw_range = elems.uora_element[0];
 
 		ieee80211_he_op_ie_to_bss_conf(&sdata->vif, elems.he_operation);
+		ieee80211_he_spr_ie_to_bss_conf(&sdata->vif, elems.he_spr);
 		/* TODO: OPEN: what happens if BSS color disable is set? */
 	}