diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile
index f6731867dd26dfc4318799e5204cd583a5d27670..5550944f0ad776d9da7174d3aac537e04c86e599 100644
--- a/drivers/video/fbdev/Makefile
+++ b/drivers/video/fbdev/Makefile
@@ -79,6 +79,7 @@ obj-$(CONFIG_FB_ATMEL)		  += atmel_lcdfb.o
 obj-$(CONFIG_FB_PVR2)             += pvr2fb.o
 obj-$(CONFIG_FB_VOODOO1)          += sstfb.o
 obj-$(CONFIG_FB_ARMCLCD)	  += amba-clcd.o
+obj-$(CONFIG_ARCH_NOMADIK)	  += amba-clcd-nomadik.o
 obj-$(CONFIG_PLAT_VERSATILE_CLCD) += amba-clcd-versatile.o
 obj-$(CONFIG_FB_GOLDFISH)         += goldfishfb.o
 obj-$(CONFIG_FB_68328)            += 68328fb.o
diff --git a/drivers/video/fbdev/amba-clcd-nomadik.c b/drivers/video/fbdev/amba-clcd-nomadik.c
new file mode 100644
index 0000000000000000000000000000000000000000..243167c8ee15b16a286b4922beb8e2289cbd4b52
--- /dev/null
+++ b/drivers/video/fbdev/amba-clcd-nomadik.c
@@ -0,0 +1,257 @@
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of.h>
+#include <linux/of_graph.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#include "amba-clcd-nomadik.h"
+
+static struct gpio_desc *grestb;
+static struct gpio_desc *scen;
+static struct gpio_desc *scl;
+static struct gpio_desc *sda;
+
+static u8 tpg110_readwrite_reg(bool write, u8 address, u8 outval)
+{
+	int i;
+	u8 inval = 0;
+
+	/* Assert SCEN */
+	gpiod_set_value_cansleep(scen, 1);
+	ndelay(150);
+	/* Hammer out the address */
+	for (i = 5; i >= 0; i--) {
+		if (address & BIT(i))
+			gpiod_set_value_cansleep(sda, 1);
+		else
+			gpiod_set_value_cansleep(sda, 0);
+		ndelay(150);
+		/* Send an SCL pulse */
+		gpiod_set_value_cansleep(scl, 1);
+		ndelay(160);
+		gpiod_set_value_cansleep(scl, 0);
+		ndelay(160);
+	}
+
+	if (write) {
+		/* WRITE */
+		gpiod_set_value_cansleep(sda, 0);
+	} else {
+		/* READ */
+		gpiod_set_value_cansleep(sda, 1);
+	}
+	ndelay(150);
+	/* Send an SCL pulse */
+	gpiod_set_value_cansleep(scl, 1);
+	ndelay(160);
+	gpiod_set_value_cansleep(scl, 0);
+	ndelay(160);
+
+	if (!write)
+		/* HiZ turn-around cycle */
+		gpiod_direction_input(sda);
+	ndelay(150);
+	/* Send an SCL pulse */
+	gpiod_set_value_cansleep(scl, 1);
+	ndelay(160);
+	gpiod_set_value_cansleep(scl, 0);
+	ndelay(160);
+
+	/* Hammer in/out the data */
+	for (i = 7; i >= 0; i--) {
+		int value;
+
+		if (write) {
+			value = !!(outval & BIT(i));
+			gpiod_set_value_cansleep(sda, value);
+		} else {
+			value = gpiod_get_value(sda);
+			if (value)
+				inval |= BIT(i);
+		}
+		ndelay(150);
+		/* Send an SCL pulse */
+		gpiod_set_value_cansleep(scl, 1);
+		ndelay(160);
+		gpiod_set_value_cansleep(scl, 0);
+		ndelay(160);
+	}
+
+	gpiod_direction_output(sda, 0);
+	/* Deassert SCEN */
+	gpiod_set_value_cansleep(scen, 0);
+	/* Satisfies SCEN pulse width */
+	udelay(1);
+
+	return inval;
+}
+
+static u8 tpg110_read_reg(u8 address)
+{
+	return tpg110_readwrite_reg(false, address, 0);
+}
+
+static void tpg110_write_reg(u8 address, u8 outval)
+{
+	tpg110_readwrite_reg(true, address, outval);
+}
+
+static void tpg110_startup(struct device *dev)
+{
+	u8 val;
+
+	dev_info(dev, "TPG110 display enable\n");
+	/* De-assert the reset signal */
+	gpiod_set_value_cansleep(grestb, 0);
+	mdelay(1);
+	dev_info(dev, "de-asserted GRESTB\n");
+
+	/* Test display communication */
+	tpg110_write_reg(0x00, 0x55);
+	val = tpg110_read_reg(0x00);
+	if (val == 0x55)
+		dev_info(dev, "passed communication test\n");
+	val = tpg110_read_reg(0x01);
+	dev_info(dev, "TPG110 chip ID: %d version: %d\n",
+		val>>4, val&0x0f);
+
+	/* Show display resolution */
+	val = tpg110_read_reg(0x02);
+	val &= 7;
+	switch (val) {
+	case 0x0:
+		dev_info(dev, "IN 400x240 RGB -> OUT 800x480 RGB (dual scan)");
+		break;
+	case 0x1:
+		dev_info(dev, "IN 480x272 RGB -> OUT 800x480 RGB (dual scan)");
+		break;
+	case 0x4:
+		dev_info(dev, "480x640 RGB");
+		break;
+	case 0x5:
+		dev_info(dev, "480x272 RGB");
+		break;
+	case 0x6:
+		dev_info(dev, "640x480 RGB");
+		break;
+	case 0x7:
+		dev_info(dev, "800x480 RGB");
+		break;
+	default:
+		dev_info(dev, "ILLEGAL RESOLUTION");
+		break;
+	}
+
+	val = tpg110_read_reg(0x03);
+	dev_info(dev, "resolution is controlled by %s\n",
+		(val & BIT(7)) ? "software" : "hardware");
+}
+
+static void tpg110_enable(struct clcd_fb *fb)
+{
+	struct device *dev = &fb->dev->dev;
+	static bool startup;
+	u8 val;
+
+	if (!startup) {
+		tpg110_startup(dev);
+		startup = true;
+	}
+
+	/* Take chip out of standby */
+	val = tpg110_read_reg(0x03);
+	val |= BIT(0);
+	tpg110_write_reg(0x03, val);
+}
+
+static void tpg110_disable(struct clcd_fb *fb)
+{
+	u8 val;
+
+	dev_info(&fb->dev->dev, "TPG110 display disable\n");
+	val = tpg110_read_reg(0x03);
+	/* Put into standby */
+	val &= ~BIT(0);
+	tpg110_write_reg(0x03, val);
+}
+
+static void tpg110_init(struct device *dev, struct device_node *np,
+			struct clcd_board *board)
+{
+	dev_info(dev, "TPG110 display init\n");
+
+	grestb = devm_get_gpiod_from_child(dev, "grestb", &np->fwnode);
+	if (IS_ERR(grestb)) {
+		dev_err(dev, "no GRESTB GPIO\n");
+		return;
+	}
+	/* This asserts the GRESTB signal, putting the display into reset */
+	gpiod_direction_output(grestb, 1);
+
+	scen = devm_get_gpiod_from_child(dev, "scen", &np->fwnode);
+	if (IS_ERR(scen)) {
+		dev_err(dev, "no SCEN GPIO\n");
+		return;
+	}
+	gpiod_direction_output(scen, 0);
+	scl = devm_get_gpiod_from_child(dev, "scl", &np->fwnode);
+	if (IS_ERR(scl)) {
+		dev_err(dev, "no SCL GPIO\n");
+		return;
+	}
+	gpiod_direction_output(scl, 0);
+	sda = devm_get_gpiod_from_child(dev, "sda", &np->fwnode);
+	if (IS_ERR(sda)) {
+		dev_err(dev, "no SDA GPIO\n");
+		return;
+	}
+	gpiod_direction_output(sda, 0);
+	board->enable = tpg110_enable;
+	board->disable = tpg110_disable;
+}
+
+int nomadik_clcd_init_panel(struct clcd_fb *fb,
+			    struct device_node *endpoint)
+{
+	struct device_node *panel;
+
+	panel = of_graph_get_remote_port_parent(endpoint);
+	if (!panel)
+		return -ENODEV;
+
+	if (of_device_is_compatible(panel, "tpo,tpg110"))
+		tpg110_init(&fb->dev->dev, panel, fb->board);
+	else
+		dev_info(&fb->dev->dev, "unknown panel\n");
+
+	/* Unknown panel, fall through */
+	return 0;
+}
+
+#define PMU_CTRL_OFFSET 0x0000
+#define PMU_CTRL_LCDNDIF BIT(26)
+
+int nomadik_clcd_init_board(struct amba_device *adev,
+			    struct clcd_board *board)
+{
+	struct regmap *pmu_regmap;
+
+	dev_info(&adev->dev, "Nomadik CLCD board init\n");
+	pmu_regmap =
+		syscon_regmap_lookup_by_compatible("stericsson,nomadik-pmu");
+	if (IS_ERR(pmu_regmap)) {
+		dev_err(&adev->dev, "could not find PMU syscon regmap\n");
+		return PTR_ERR(pmu_regmap);
+	}
+	regmap_update_bits(pmu_regmap,
+			   PMU_CTRL_OFFSET,
+			   PMU_CTRL_LCDNDIF,
+			   0);
+	dev_info(&adev->dev, "set PMU mux to CLCD mode\n");
+
+	return 0;
+}
diff --git a/drivers/video/fbdev/amba-clcd-nomadik.h b/drivers/video/fbdev/amba-clcd-nomadik.h
new file mode 100644
index 0000000000000000000000000000000000000000..50aa9bda69fd42b40dcd48215dc76baafae35e0f
--- /dev/null
+++ b/drivers/video/fbdev/amba-clcd-nomadik.h
@@ -0,0 +1,24 @@
+#ifndef _AMBA_CLCD_NOMADIK_H
+#define _AMBA_CLCD_NOMADIK_H
+
+#include <linux/amba/bus.h>
+
+#ifdef CONFIG_ARCH_NOMADIK
+int nomadik_clcd_init_board(struct amba_device *adev,
+			     struct clcd_board *board);
+int nomadik_clcd_init_panel(struct clcd_fb *fb,
+			    struct device_node *endpoint);
+#else
+static inline int nomadik_clcd_init_board(struct amba_device *adev,
+					  struct clcd_board *board)
+{
+	return 0;
+}
+static inline int nomadik_clcd_init_panel(struct clcd_fb *fb,
+					  struct device_node *endpoint)
+{
+	return 0;
+}
+#endif
+
+#endif /* inclusion guard */
diff --git a/drivers/video/fbdev/amba-clcd.c b/drivers/video/fbdev/amba-clcd.c
index 371f4e2aea6cae2319523ae7fd1ab4b75388f4a2..2b45c7be4815708bf3a54a48a4a5707ed9264d99 100644
--- a/drivers/video/fbdev/amba-clcd.c
+++ b/drivers/video/fbdev/amba-clcd.c
@@ -35,6 +35,8 @@
 #include <video/of_display_timing.h>
 #include <video/videomode.h>
 
+#include "amba-clcd-nomadik.h"
+
 #define to_clcd(info)	container_of(info, struct clcd_fb, fb)
 
 /* This is limited to 16 characters when displayed by X startup */
@@ -997,7 +999,7 @@ static int clcdfb_probe(struct amba_device *dev, const struct amba_id *id)
 	if (ret)
 		goto free_fb;
 
-	ret = clcdfb_register(fb); 
+	ret = clcdfb_register(fb);
 	if (ret == 0) {
 		amba_set_drvdata(dev, fb);
 		goto out;
@@ -1041,6 +1043,8 @@ static struct clcd_vendor_data vendor_nomadik = {
 	.clock_timregs = true,
 	.packed_24_bit_pixels = true,
 	.st_bitmux_control = true,
+	.init_board = nomadik_clcd_init_board,
+	.init_panel = nomadik_clcd_init_panel,
 };
 
 static struct amba_id clcdfb_id_table[] = {