Skip to content

L
linux
Commit 1d58df4b authored by Jeff Garzik's avatar Jeff Garzik
Browse files
Options

Merge redhat.com:/spare/repo/linux-2.5 

into redhat.com:/spare/repo/netdev-2.6/tulip
parents 0010bc50 437e374d
Hide whitespace changes
Inline Side-by-side
Showing with 350 additions and 152 deletions
drivers/net/tulip/Kconfig
View file @ 1d58df4b
......@@ -68,6 +68,26 @@ config TULIP_MMIO
obscure bugs if your mainboard has memory controller timing issues.
If in doubt, say N.
config TULIP_NAPI
bool "Use NAPI RX polling "
depends on TULIP
---help---
This is of useful for servers and routers dealing with high network loads.
See <file:Documentation/networking/NAPI_HOWTO.txt>.
If in doubt, say N.
config TULIP_NAPI_HW_MITIGATION
bool "Use Interrupt Mitigation "
depends on TULIP_NAPI
---help---
Use HW to reduce RX interrupts. Not strict necessary since NAPI reduces
RX interrupts but itself. Although this reduces RX interrupts even at
low levels traffic at the cost of a small latency.
If in doubt, say Y.
config DE4X5
tristate "Generic DECchip & DIGITAL EtherWORKS PCI/EISA"
depends on NET_TULIP && (PCI || EISA)
......
drivers/net/tulip/interrupt.c
View file @ 1d58df4b
......@@ -19,13 +19,13 @@
#include <linux/etherdevice.h>
#include <linux/pci.h>
int tulip_rx_copybreak;
unsigned int tulip_max_interrupt_work;
#ifdef CONFIG_NET_HW_FLOWCONTROL
#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION
#define MIT_SIZE 15
#define MIT_TABLE 15 /* We use 0 or max */
unsigned int mit_table[MIT_SIZE+1] =
{
/* CRS11 21143 hardware Mitigation Control Interrupt
......@@ -99,16 +99,28 @@ int tulip_refill_rx(struct net_device *dev)
return refilled;
}
#ifdef CONFIG_TULIP_NAPI
static int tulip_rx(struct net_device *dev)
void oom_timer(unsigned long data)
{
struct net_device *dev = (struct net_device *)data;
netif_rx_schedule(dev);
}
int tulip_poll(struct net_device *dev, int *budget)
{
struct tulip_private *tp = (struct tulip_private *)dev->priv;
int entry = tp->cur_rx % RX_RING_SIZE;
int rx_work_limit = tp->dirty_rx + RX_RING_SIZE - tp->cur_rx;
int rx_work_limit = *budget;
int received = 0;
#ifdef CONFIG_NET_HW_FLOWCONTROL
int drop = 0, mit_sel = 0;
if (!netif_running(dev))
goto done;
if (rx_work_limit > dev->quota)
rx_work_limit = dev->quota;
#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION
/* that one buffer is needed for mit activation; or might be a
bug in the ring buffer code; check later -- JHS*/
......@@ -116,6 +128,237 @@ static int tulip_rx(struct net_device *dev)
if (rx_work_limit >=RX_RING_SIZE) rx_work_limit--;
#endif
if (tulip_debug > 4)
printk(KERN_DEBUG " In tulip_rx(), entry %d %8.8x.\n", entry,
tp->rx_ring[entry].status);
do {
/* Acknowledge current RX interrupt sources. */
outl((RxIntr | RxNoBuf), dev->base_addr + CSR5);
/* If we own the next entry, it is a new packet. Send it up. */
while ( ! (tp->rx_ring[entry].status & cpu_to_le32(DescOwned))) {
s32 status = le32_to_cpu(tp->rx_ring[entry].status);
if (tp->dirty_rx + RX_RING_SIZE == tp->cur_rx)
break;
if (tulip_debug > 5)
printk(KERN_DEBUG "%s: In tulip_rx(), entry %d %8.8x.\n",
dev->name, entry, status);
if (--rx_work_limit < 0)
goto not_done;
if ((status & 0x38008300) != 0x0300) {
if ((status & 0x38000300) != 0x0300) {
/* Ingore earlier buffers. */
if ((status & 0xffff) != 0x7fff) {
if (tulip_debug > 1)
printk(KERN_WARNING "%s: Oversized Ethernet frame "
"spanned multiple buffers, status %8.8x!\n",
dev->name, status);
tp->stats.rx_length_errors++;
}
} else if (status & RxDescFatalErr) {
/* There was a fatal error. */
if (tulip_debug > 2)
printk(KERN_DEBUG "%s: Receive error, Rx status %8.8x.\n",
dev->name, status);
tp->stats.rx_errors++; /* end of a packet.*/
if (status & 0x0890) tp->stats.rx_length_errors++;
if (status & 0x0004) tp->stats.rx_frame_errors++;
if (status & 0x0002) tp->stats.rx_crc_errors++;
if (status & 0x0001) tp->stats.rx_fifo_errors++;
}
} else {
/* Omit the four octet CRC from the length. */
short pkt_len = ((status >> 16) & 0x7ff) - 4;
struct sk_buff *skb;
#ifndef final_version
if (pkt_len > 1518) {
printk(KERN_WARNING "%s: Bogus packet size of %d (%#x).\n",
dev->name, pkt_len, pkt_len);
pkt_len = 1518;
tp->stats.rx_length_errors++;
}
#endif
/* Check if the packet is long enough to accept without copying
to a minimally-sized skbuff. */
if (pkt_len < tulip_rx_copybreak
&& (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
skb->dev = dev;
skb_reserve(skb, 2); /* 16 byte align the IP header */
pci_dma_sync_single(tp->pdev,
tp->rx_buffers[entry].mapping,
pkt_len, PCI_DMA_FROMDEVICE);
#if ! defined(__alpha__)
eth_copy_and_sum(skb, tp->rx_buffers[entry].skb->tail,
pkt_len, 0);
skb_put(skb, pkt_len);
#else
memcpy(skb_put(skb, pkt_len),
tp->rx_buffers[entry].skb->tail,
pkt_len);
#endif
} else { /* Pass up the skb already on the Rx ring. */
char *temp = skb_put(skb = tp->rx_buffers[entry].skb,
pkt_len);
#ifndef final_version
if (tp->rx_buffers[entry].mapping !=
le32_to_cpu(tp->rx_ring[entry].buffer1)) {
printk(KERN_ERR "%s: Internal fault: The skbuff addresses "
"do not match in tulip_rx: %08x vs. %08x %p / %p.\n",
dev->name,
le32_to_cpu(tp->rx_ring[entry].buffer1),
tp->rx_buffers[entry].mapping,
skb->head, temp);
}
#endif
pci_unmap_single(tp->pdev, tp->rx_buffers[entry].mapping,
PKT_BUF_SZ, PCI_DMA_FROMDEVICE);
tp->rx_buffers[entry].skb = NULL;
tp->rx_buffers[entry].mapping = 0;
}
skb->protocol = eth_type_trans(skb, dev);
netif_receive_skb(skb);
dev->last_rx = jiffies;
tp->stats.rx_packets++;
tp->stats.rx_bytes += pkt_len;
}
received++;
entry = (++tp->cur_rx) % RX_RING_SIZE;
if (tp->cur_rx - tp->dirty_rx > RX_RING_SIZE/4)
tulip_refill_rx(dev);
}
/* New ack strategy... irq does not ack Rx any longer
hopefully this helps */
/* Really bad things can happen here... If new packet arrives
* and an irq arrives (tx or just due to occasionally unset
* mask), it will be acked by irq handler, but new thread
* is not scheduled. It is major hole in design.
* No idea how to fix this if "playing with fire" will fail
* tomorrow (night 011029). If it will not fail, we won
* finally: amount of IO did not increase at all. */
} while ((inl(dev->base_addr + CSR5) & RxIntr));
done:
#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION
/* We use this simplistic scheme for IM. It's proven by
real life installations. We can have IM enabled
continuesly but this would cause unnecessary latency.
Unfortunely we can't use all the NET_RX_* feedback here.
This would turn on IM for devices that is not contributing
to backlog congestion with unnecessary latency.
We monitor the the device RX-ring and have:
HW Interrupt Mitigation either ON or OFF.
ON: More then 1 pkt received (per intr.) OR we are dropping
OFF: Only 1 pkt received
Note. We only use min and max (0, 15) settings from mit_table */
if( tp->flags & HAS_INTR_MITIGATION) {
if( received > 1 ) {
if( ! tp->mit_on ) {
tp->mit_on = 1;
outl(mit_table[MIT_TABLE], dev->base_addr + CSR11);
}
}
else {
if( tp->mit_on ) {
tp->mit_on = 0;
outl(0, dev->base_addr + CSR11);
}
}
}
#endif /* CONFIG_TULIP_NAPI_HW_MITIGATION */
dev->quota -= received;
*budget -= received;
tulip_refill_rx(dev);
/* If RX ring is not full we are out of memory. */
if (tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL) goto oom;
/* Remove us from polling list and enable RX intr. */
netif_rx_complete(dev);
outl(tulip_tbl[tp->chip_id].valid_intrs, dev->base_addr+CSR7);
/* The last op happens after poll completion. Which means the following:
* 1. it can race with disabling irqs in irq handler
* 2. it can race with dise/enabling irqs in other poll threads
* 3. if an irq raised after beginning loop, it will be immediately
* triggered here.
*
* Summarizing: the logic results in some redundant irqs both
* due to races in masking and due to too late acking of already
* processed irqs. But it must not result in losing events.
*/
return 0;
not_done:
if (!received) {
received = dev->quota; /* Not to happen */
}
dev->quota -= received;
*budget -= received;
if (tp->cur_rx - tp->dirty_rx > RX_RING_SIZE/2 ||
tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL)
tulip_refill_rx(dev);
if (tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL) goto oom;
return 1;
oom: /* Executed with RX ints disabled */
/* Start timer, stop polling, but do not enable rx interrupts. */
mod_timer(&tp->oom_timer, jiffies+1);
/* Think: timer_pending() was an explicit signature of bug.
* Timer can be pending now but fired and completed
* before we did netif_rx_complete(). See? We would lose it. */
/* remove ourselves from the polling list */
netif_rx_complete(dev);
return 0;
}
#else /* CONFIG_TULIP_NAPI */
static int tulip_rx(struct net_device *dev)
{
struct tulip_private *tp = (struct tulip_private *)dev->priv;
int entry = tp->cur_rx % RX_RING_SIZE;
int rx_work_limit = tp->dirty_rx + RX_RING_SIZE - tp->cur_rx;
int received = 0;
if (tulip_debug > 4)
printk(KERN_DEBUG " In tulip_rx(), entry %d %8.8x.\n", entry,
tp->rx_ring[entry].status);
......@@ -163,11 +406,6 @@ static int tulip_rx(struct net_device *dev)
}
#endif
#ifdef CONFIG_NET_HW_FLOWCONTROL
drop = atomic_read(&netdev_dropping);
if (drop)
goto throttle;
#endif
/* Check if the packet is long enough to accept without copying
to a minimally-sized skbuff. */
if (pkt_len < tulip_rx_copybreak
......@@ -209,44 +447,9 @@ static int tulip_rx(struct net_device *dev)
tp->rx_buffers[entry].mapping = 0;
}
skb->protocol = eth_type_trans(skb, dev);
#ifdef CONFIG_NET_HW_FLOWCONTROL
mit_sel =
#endif
netif_rx(skb);
#ifdef CONFIG_NET_HW_FLOWCONTROL
switch (mit_sel) {
case NET_RX_SUCCESS:
case NET_RX_CN_LOW:
case NET_RX_CN_MOD:
break;
case NET_RX_CN_HIGH:
rx_work_limit -= NET_RX_CN_HIGH; /* additional*/
break;
case NET_RX_DROP:
rx_work_limit = -1;
break;
default:
printk("unknown feedback return code %d\n", mit_sel);
break;
}
drop = atomic_read(&netdev_dropping);
if (drop) {
throttle:
rx_work_limit = -1;
mit_sel = NET_RX_DROP;
if (tp->fc_bit) {
long ioaddr = dev->base_addr;
netif_rx(skb);
/* disable Rx & RxNoBuf ints. */
outl(tulip_tbl[tp->chip_id].valid_intrs&RX_A_NBF_STOP, ioaddr + CSR7);
set_bit(tp->fc_bit, &netdev_fc_xoff);
}
}
#endif
dev->last_rx = jiffies;
tp->stats.rx_packets++;
tp->stats.rx_bytes += pkt_len;
......@@ -254,42 +457,9 @@ static int tulip_rx(struct net_device *dev)
received++;
entry = (++tp->cur_rx) % RX_RING_SIZE;
}
#ifdef CONFIG_NET_HW_FLOWCONTROL
/* We use this simplistic scheme for IM. It's proven by
real life installations. We can have IM enabled
continuesly but this would cause unnecessary latency.
Unfortunely we can't use all the NET_RX_* feedback here.
This would turn on IM for devices that is not contributing
to backlog congestion with unnecessary latency.
We monitor the device RX-ring and have:
HW Interrupt Mitigation either ON or OFF.
ON: More then 1 pkt received (per intr.) OR we are dropping
OFF: Only 1 pkt received
Note. We only use min and max (0, 15) settings from mit_table */
if( tp->flags & HAS_INTR_MITIGATION) {
if((received > 1 || mit_sel == NET_RX_DROP)
&& tp->mit_sel != 15 ) {
tp->mit_sel = 15;
tp->mit_change = 1; /* Force IM change */
}
if((received <= 1 && mit_sel != NET_RX_DROP) && tp->mit_sel != 0 ) {
tp->mit_sel = 0;
tp->mit_change = 1; /* Force IM change */
}
}
return RX_RING_SIZE+1; /* maxrx+1 */
#else
return received;
#endif
}
#endif /* CONFIG_TULIP_NAPI */
static inline unsigned int phy_interrupt (struct net_device *dev)
{
......@@ -323,7 +493,6 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
struct tulip_private *tp = (struct tulip_private *)dev->priv;
long ioaddr = dev->base_addr;
int csr5;
int entry;
int missed;
int rx = 0;
int tx = 0;
......@@ -331,6 +500,11 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
int maxrx = RX_RING_SIZE;
int maxtx = TX_RING_SIZE;
int maxoi = TX_RING_SIZE;
#ifdef CONFIG_TULIP_NAPI
int rxd = 0;
#else
int entry;
#endif
unsigned int work_count = tulip_max_interrupt_work;
unsigned int handled = 0;
......@@ -346,22 +520,41 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
tp->nir++;
do {
#ifdef CONFIG_TULIP_NAPI
if (!rxd && (csr5 & (RxIntr | RxNoBuf))) {
rxd++;
/* Mask RX intrs and add the device to poll list. */
outl(tulip_tbl[tp->chip_id].valid_intrs&~RxPollInt, ioaddr + CSR7);
netif_rx_schedule(dev);
if (!(csr5&~(AbnormalIntr|NormalIntr|RxPollInt|TPLnkPass)))
break;
}
/* Acknowledge the interrupt sources we handle here ASAP
the poll function does Rx and RxNoBuf acking */
outl(csr5 & 0x0001ff3f, ioaddr + CSR5);
#else
/* Acknowledge all of the current interrupt sources ASAP. */
outl(csr5 & 0x0001ffff, ioaddr + CSR5);
if (tulip_debug > 4)
printk(KERN_DEBUG "%s: interrupt csr5=%#8.8x new csr5=%#8.8x.\n",
dev->name, csr5, inl(dev->base_addr + CSR5));
if (csr5 & (RxIntr | RxNoBuf)) {
#ifdef CONFIG_NET_HW_FLOWCONTROL
if ((!tp->fc_bit) ||
(!test_bit(tp->fc_bit, &netdev_fc_xoff)))
#endif
rx += tulip_rx(dev);
tulip_refill_rx(dev);
}
#endif /* CONFIG_TULIP_NAPI */
if (tulip_debug > 4)
printk(KERN_DEBUG "%s: interrupt csr5=%#8.8x new csr5=%#8.8x.\n",
dev->name, csr5, inl(dev->base_addr + CSR5));
if (csr5 & (TxNoBuf | TxDied | TxIntr | TimerInt)) {
unsigned int dirty_tx;
......@@ -462,15 +655,8 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
}
if (csr5 & RxDied) { /* Missed a Rx frame. */
tp->stats.rx_missed_errors += inl(ioaddr + CSR8) & 0xffff;
#ifdef CONFIG_NET_HW_FLOWCONTROL
if (tp->fc_bit && !test_bit(tp->fc_bit, &netdev_fc_xoff)) {
tp->stats.rx_errors++;
tulip_start_rxtx(tp);
}
#else
tp->stats.rx_errors++;
tulip_start_rxtx(tp);
#endif
}
/*
* NB: t21142_lnk_change() does a del_timer_sync(), so be careful if this
......@@ -504,10 +690,6 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
if (tulip_debug > 2)
printk(KERN_ERR "%s: Re-enabling interrupts, %8.8x.\n",
dev->name, csr5);
#ifdef CONFIG_NET_HW_FLOWCONTROL
if (tp->fc_bit && (test_bit(tp->fc_bit, &netdev_fc_xoff)))
if (net_ratelimit()) printk("BUG!! enabling interrupt when FC off (timerintr.) \n");
#endif
outl(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7);
tp->ttimer = 0;
oi++;
......@@ -520,16 +702,9 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
/* Acknowledge all interrupt sources. */
outl(0x8001ffff, ioaddr + CSR5);
if (tp->flags & HAS_INTR_MITIGATION) {
#ifdef CONFIG_NET_HW_FLOWCONTROL
if(tp->mit_change) {
outl(mit_table[tp->mit_sel], ioaddr + CSR11);
tp->mit_change = 0;
}
#else
/* Josip Loncaric at ICASE did extensive experimentation
to develop a good interrupt mitigation setting.*/
outl(0x8b240000, ioaddr + CSR11);
#endif
} else if (tp->chip_id == LC82C168) {
/* the LC82C168 doesn't have a hw timer.*/
outl(0x00, ioaddr + CSR7);
......@@ -537,10 +712,8 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
} else {
/* Mask all interrupting sources, set timer to
re-enable. */
#ifndef CONFIG_NET_HW_FLOWCONTROL
outl(((~csr5) & 0x0001ebef) | AbnormalIntr | TimerInt, ioaddr + CSR7);
outl(0x0012, ioaddr + CSR11);
#endif
}
break;
}
......@@ -550,6 +723,21 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
break;
csr5 = inl(ioaddr + CSR5);
#ifdef CONFIG_TULIP_NAPI
if (rxd)
csr5 &= ~RxPollInt;
} while ((csr5 & (TxNoBuf |
TxDied |
TxIntr |
TimerInt |
/* Abnormal intr. */
RxDied |
TxFIFOUnderflow |
TxJabber |
TPLnkFail |
SytemError )) != 0);
#else
} while ((csr5 & (NormalIntr|AbnormalIntr)) != 0);
tulip_refill_rx(dev);
......@@ -574,6 +762,7 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
}
}
}
#endif /* CONFIG_TULIP_NAPI */
if ((missed = inl(ioaddr + CSR8) & 0x1ffff)) {
tp->stats.rx_dropped += missed & 0x10000 ? 0x10000 : missed;
......
drivers/net/tulip/tulip.h
View file @ 1d58df4b
......@@ -126,6 +126,7 @@ enum pci_cfg_driver_reg {
CFDD_Snooze = (1 << 30),
};
#define RxPollInt (RxIntr|RxNoBuf|RxDied|RxJabber)
/* The bits in the CSR5 status registers, mostly interrupt sources. */
enum status_bits {
......@@ -251,9 +252,9 @@ enum t21143_csr6_bits {
Making the Tx ring too large decreases the effectiveness of channel
bonding and packet priority.
There are no ill effects from too-large receive rings. */
#define TX_RING_SIZE 16
#define RX_RING_SIZE 32
#define TX_RING_SIZE 32
#define RX_RING_SIZE 128
#define MEDIA_MASK 31
#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer. */
......@@ -343,17 +344,15 @@ struct tulip_private {
int flags;
struct net_device_stats stats;
struct timer_list timer; /* Media selection timer. */
struct timer_list oom_timer; /* Out of memory timer. */
u32 mc_filter[2];
spinlock_t lock;
spinlock_t mii_lock;
unsigned int cur_rx, cur_tx; /* The next free ring entry */
unsigned int dirty_rx, dirty_tx; /* The ring entries to be free()ed. */
#ifdef CONFIG_NET_HW_FLOWCONTROL
#define RX_A_NBF_STOP 0xffffff3f /* To disable RX and RX-NOBUF ints. */
int fc_bit;
int mit_sel;
int mit_change; /* Signal for Interrupt Mitigtion */
#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION
int mit_on;
#endif
unsigned int full_duplex:1; /* Full-duplex operation requested. */
unsigned int full_duplex_lock:1;
......@@ -415,6 +414,10 @@ extern unsigned int tulip_max_interrupt_work;
extern int tulip_rx_copybreak;
irqreturn_t tulip_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
int tulip_refill_rx(struct net_device *dev);
#ifdef CONFIG_TULIP_NAPI
int tulip_poll(struct net_device *dev, int *budget);
#endif
/* media.c */
int tulip_mdio_read(struct net_device *dev, int phy_id, int location);
......@@ -438,6 +441,7 @@ extern int tulip_debug;
extern const char * const medianame[];
extern const char tulip_media_cap[];
extern struct tulip_chip_table tulip_tbl[];
void oom_timer(unsigned long data);
extern u8 t21040_csr13[];
#ifndef USE_IO_OPS
......
drivers/net/tulip/tulip_core.c
View file @ 1d58df4b
......@@ -14,11 +14,17 @@
*/
#include <linux/config.h>
#define DRV_NAME "tulip"
#ifdef CONFIG_TULIP_NAPI
#define DRV_VERSION "1.1.13-NAPI" /* Keep at least for test */
#else
#define DRV_VERSION "1.1.13"
#endif
#define DRV_RELDATE "May 11, 2002"
#include <linux/config.h>
#include <linux/module.h>
#include "tulip.h"
#include <linux/pci.h>
......@@ -466,29 +472,16 @@ static void tulip_up(struct net_device *dev)
to an alternate media type. */
tp->timer.expires = RUN_AT(next_tick);
add_timer(&tp->timer);
}
#ifdef CONFIG_NET_HW_FLOWCONTROL
/* Enable receiver */
void tulip_xon(struct net_device *dev)
{
struct tulip_private *tp = (struct tulip_private *)dev->priv;
clear_bit(tp->fc_bit, &netdev_fc_xoff);
if (netif_running(dev)){
tulip_refill_rx(dev);
outl(tulip_tbl[tp->chip_id].valid_intrs, dev->base_addr+CSR7);
}
}
#ifdef CONFIG_TULIP_NAPI
init_timer(&tp->oom_timer);
tp->oom_timer.data = (unsigned long)dev;
tp->oom_timer.function = oom_timer;
#endif
}
static int
tulip_open(struct net_device *dev)
{
#ifdef CONFIG_NET_HW_FLOWCONTROL
struct tulip_private *tp = (struct tulip_private *)dev->priv;
#endif
int retval;
if ((retval = request_irq(dev->irq, &tulip_interrupt, SA_SHIRQ, dev->name, dev)))
......@@ -498,10 +491,6 @@ tulip_open(struct net_device *dev)
tulip_up (dev);
#ifdef CONFIG_NET_HW_FLOWCONTROL
tp->fc_bit = netdev_register_fc(dev, tulip_xon);
#endif
netif_start_queue (dev);
return 0;
......@@ -582,10 +571,7 @@ static void tulip_tx_timeout(struct net_device *dev)
#endif
/* Stop and restart the chip's Tx processes . */
#ifdef CONFIG_NET_HW_FLOWCONTROL
if (tp->fc_bit && test_bit(tp->fc_bit,&netdev_fc_xoff))
printk("BUG tx_timeout restarting rx when fc on\n");
#endif
tulip_restart_rxtx(tp);
/* Trigger an immediate transmit demand. */
outl(0, ioaddr + CSR1);
......@@ -742,7 +728,9 @@ static void tulip_down (struct net_device *dev)
unsigned long flags;
del_timer_sync (&tp->timer);
#ifdef CONFIG_TULIP_NAPI
del_timer_sync (&tp->oom_timer);
#endif
spin_lock_irqsave (&tp->lock, flags);
/* Disable interrupts by clearing the interrupt mask. */
......@@ -781,13 +769,6 @@ static int tulip_close (struct net_device *dev)
netif_stop_queue (dev);
#ifdef CONFIG_NET_HW_FLOWCONTROL
if (tp->fc_bit) {
int bit = tp->fc_bit;
tp->fc_bit = 0;
netdev_unregister_fc(bit);
}
#endif
tulip_down (dev);
if (tulip_debug > 1)
......@@ -1629,6 +1610,10 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
dev->hard_start_xmit = tulip_start_xmit;
dev->tx_timeout = tulip_tx_timeout;
dev->watchdog_timeo = TX_TIMEOUT;
#ifdef CONFIG_TULIP_NAPI
dev->poll = tulip_poll;
dev->weight = 16;
#endif
dev->stop = tulip_close;
dev->get_stats = tulip_get_stats;
dev->do_ioctl = private_ioctl;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7