Merge bk://linux-acpi.bkbits.net/linux-acpi-release-2.6.5

into ppc970.osdl.org:/home/torvalds/v2.6/linux

arch/i386/kernel/acpi/boot.c

@@ -277,7 +277,7 @@ acpi_parse_ioapic (
  * Parse Interrupt Source Override for the ACPI SCI
  */
 static void
-acpi_parse_sci_int_src_ovr(u8 bus_irq, u16 polarity, u16 trigger, u32 global_irq)
+acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger)
 {
 	if (trigger == 0)	/* compatible SCI trigger is level */
 		trigger = 3;
@@ -292,13 +292,18 @@ acpi_parse_sci_int_src_ovr(u8 bus_irq, u16 polarity, u16 trigger, u32 global_irq
 	if (acpi_sci_flags.polarity)
 		polarity = acpi_sci_flags.polarity;
 
-	mp_override_legacy_irq(bus_irq, polarity, trigger, global_irq);
+	/*
+ 	 * mp_config_acpi_legacy_irqs() already setup IRQs < 16
+	 * If GSI is < 16, this will update its flags,
+	 * else it will create a new mp_irqs[] entry.
+	 */
+	mp_override_legacy_irq(gsi, polarity, trigger, gsi);
 
 	/*
 	 * stash over-ride to indicate we've been here
 	 * and for later update of acpi_fadt
 	 */
-	acpi_sci_override_gsi = global_irq;
+	acpi_sci_override_gsi = gsi;
 	return;
 }
 
@@ -315,9 +320,8 @@ acpi_parse_int_src_ovr (
 	acpi_table_print_madt_entry(header);
 
 	if (intsrc->bus_irq == acpi_fadt.sci_int) {
-		acpi_parse_sci_int_src_ovr(intsrc->bus_irq,
-			intsrc->flags.polarity, intsrc->flags.trigger,
-			intsrc->global_irq);
+		acpi_sci_ioapic_setup(intsrc->global_irq,
+			intsrc->flags.polarity, intsrc->flags.trigger);
 		return 0;
 	}
 
@@ -660,7 +664,7 @@ acpi_parse_madt_ioapic_entries(void)
 	 * pretend we got one so we can set the SCI flags.
 	 */
 	if (!acpi_sci_override_gsi)
-		acpi_parse_sci_int_src_ovr(acpi_fadt.sci_int, 0, 0, acpi_fadt.sci_int);
+		acpi_sci_ioapic_setup(acpi_fadt.sci_int, 0, 0);
 
 	count = acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src, NR_IRQ_VECTORS);
 	if (count < 0) {

drivers/acpi/ec.c

@@ -719,7 +719,7 @@ acpi_ec_start (
 	 * Install GPE handler
 	 */
 	status = acpi_install_gpe_handler(NULL, ec->gpe_bit,
-		ACPI_EVENT_EDGE_TRIGGERED, &acpi_ec_gpe_handler, ec);
+		ACPI_GPE_EDGE_TRIGGERED, &acpi_ec_gpe_handler, ec);
 	if (ACPI_FAILURE(status)) {
 		return_VALUE(-ENODEV);
 	}
@@ -803,7 +803,7 @@ acpi_ec_ecdt_probe (void)
 	 * Install GPE handler
 	 */
 	status = acpi_install_gpe_handler(NULL, ec_ecdt->gpe_bit,
-		ACPI_EVENT_EDGE_TRIGGERED, &acpi_ec_gpe_handler,
+		ACPI_GPE_EDGE_TRIGGERED, &acpi_ec_gpe_handler,
 		ec_ecdt);
 	if (ACPI_FAILURE(status)) {
 		goto error;

drivers/acpi/events/evgpe.c

@@ -99,9 +99,8 @@ acpi_ev_get_gpe_event_info (
 		return (NULL);
 	}
 
-	/*
-	 * A Non-null gpe_device means this is a GPE Block Device.
-	 */
+	/* A Non-NULL gpe_device means this is a GPE Block Device */
+
 	obj_desc = acpi_ns_get_attached_object ((struct acpi_namespace_node *) gpe_device);
 	if (!obj_desc ||
 		!obj_desc->device.gpe_block) {
@@ -297,7 +296,7 @@ acpi_ev_asynch_execute_gpe_method (
 		}
 	}
 
-	if (local_gpe_event_info.flags & ACPI_EVENT_LEVEL_TRIGGERED) {
+	if ((local_gpe_event_info.flags & ACPI_GPE_XRUPT_TYPE_MASK) == ACPI_GPE_LEVEL_TRIGGERED) {
 		/*
 		 * GPE is level-triggered, we clear the GPE status bit after handling
 		 * the event.
@@ -346,7 +345,7 @@ acpi_ev_gpe_dispatch (
 	 * If edge-triggered, clear the GPE status bit now.  Note that
 	 * level-triggered events are cleared after the GPE is serviced.
 	 */
-	if (gpe_event_info->flags & ACPI_EVENT_EDGE_TRIGGERED) {
+	if ((gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK) == ACPI_GPE_EDGE_TRIGGERED) {
 		status = acpi_hw_clear_gpe (gpe_event_info);
 		if (ACPI_FAILURE (status)) {
 			ACPI_REPORT_ERROR (("acpi_ev_gpe_dispatch: Unable to clear GPE[%2X]\n",
@@ -369,7 +368,7 @@ acpi_ev_gpe_dispatch (
 
 		/* It is now safe to clear level-triggered events. */
 
-		if (gpe_event_info->flags & ACPI_EVENT_LEVEL_TRIGGERED) {
+		if ((gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK) == ACPI_GPE_LEVEL_TRIGGERED) {
 			status = acpi_hw_clear_gpe (gpe_event_info);
 			if (ACPI_FAILURE (status)) {
 				ACPI_REPORT_ERROR ((

drivers/acpi/events/evgpeblk.c

@@ -168,11 +168,11 @@ acpi_ev_walk_gpe_list (
  *              information for quick lookup during GPE dispatch
  *
  *              The name of each GPE control method is of the form:
- *                  "_Lnn" or "_Enn"
- *                  Where:
- *                      L      - means that the GPE is level triggered
- *                      E      - means that the GPE is edge triggered
- *                      nn     - is the GPE number [in HEX]
+ *              "_Lxx" or "_Exx"
+ *              Where:
+ *                  L      - means that the GPE is level triggered
+ *                  E      - means that the GPE is edge triggered
+ *                  xx     - is the GPE number [in HEX]
  *
  ******************************************************************************/
 
@@ -188,36 +188,41 @@ acpi_ev_save_method_info (
 	u32                             gpe_number;
 	char                            name[ACPI_NAME_SIZE + 1];
 	u8                              type;
-	acpi_status                     status;
 
 
 	ACPI_FUNCTION_TRACE ("ev_save_method_info");
 
 
-	/* Extract the name from the object and convert to a string */
-
+	/*
+	 * _Lxx and _Exx GPE method support
+	 *
+	 * 1) Extract the name from the object and convert to a string
+	 */
 	ACPI_MOVE_32_TO_32 (name,
 			   &((struct acpi_namespace_node *) obj_handle)->name.integer);
 	name[ACPI_NAME_SIZE] = 0;
 
 	/*
-	 * Edge/Level determination is based on the 2nd character
-	 * of the method name
+	 * 2) Edge/Level determination is based on the 2nd character
+	 *    of the method name
+	 *
+	 * NOTE: Default GPE type is RUNTIME.  May be changed later to WAKE if a
+	 * _PRW object is found that points to this GPE.
 	 */
 	switch (name[1]) {
 	case 'L':
-		type = ACPI_EVENT_LEVEL_TRIGGERED;
+		type = ACPI_GPE_LEVEL_TRIGGERED | ACPI_GPE_TYPE_RUNTIME;
 		break;
 
 	case 'E':
-		type = ACPI_EVENT_EDGE_TRIGGERED;
+		type = ACPI_GPE_EDGE_TRIGGERED | ACPI_GPE_TYPE_RUNTIME;
 		break;
 
 	default:
 		/* Unknown method type, just ignore it! */
 
 		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
-			"Unknown GPE method type: %s (name not of form _Lnn or _Enn)\n",
+			"Unknown GPE method type: %s (name not of form _Lxx or _Exx)\n",
 			name));
 		return_ACPI_STATUS (AE_OK);
 	}
@@ -229,7 +234,7 @@ acpi_ev_save_method_info (
 		/* Conversion failed; invalid method, just ignore it */
 
 		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
-			"Could not extract GPE number from name: %s (name is not of form _Lnn or _Enn)\n",
+			"Could not extract GPE number from name: %s (name is not of form _Lxx or _Exx)\n",
 			name));
 		return_ACPI_STATUS (AE_OK);
 	}
@@ -255,13 +260,6 @@ acpi_ev_save_method_info (
 	gpe_event_info->flags    = type;
 	gpe_event_info->method_node = (struct acpi_namespace_node *) obj_handle;
 
-	/* Enable the GPE (SCIs should be disabled at this point) */
-
-	status = acpi_hw_enable_gpe (gpe_event_info);
-	if (ACPI_FAILURE (status)) {
-		return_ACPI_STATUS (status);
-	}
-
 	ACPI_DEBUG_PRINT ((ACPI_DB_LOAD,
 		"Registered GPE method %s as GPE number 0x%.2X\n",
 		name, gpe_number));
@@ -269,6 +267,122 @@ acpi_ev_save_method_info (
 }
 
 
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_get_gpe_type
+ *
+ * PARAMETERS:  Callback from walk_namespace
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Called from acpi_walk_namespace. Expects each object to be a
+ *              Device.  Run the _PRW method.  If present, extract the GPE
+ *              number and mark the GPE as a WAKE GPE.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ev_get_gpe_type (
+	acpi_handle                     obj_handle,
+	u32                             level,
+	void                            *info,
+	void                            **return_value)
+{
+	struct acpi_gpe_walk_info       *gpe_info = (void *) info;
+	struct acpi_namespace_node      *gpe_device;
+	struct acpi_gpe_block_info      *gpe_block;
+	struct acpi_namespace_node      *target_gpe_device;
+	struct acpi_gpe_event_info      *gpe_event_info;
+	union acpi_operand_object       *pkg_desc;
+	union acpi_operand_object       *obj_desc;
+	u32                             gpe_number;
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE ("ev_get_gpe_type");
+
+
+	/* Check for a _PRW method under this device */
+
+	status = acpi_ut_evaluate_object (obj_handle, METHOD_NAME__PRW,
+			 ACPI_BTYPE_PACKAGE, &pkg_desc);
+	if (status == AE_NOT_FOUND) {
+		return_ACPI_STATUS (AE_OK);
+	}
+	else if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	/* The returned _PRW package must have at least two elements */
+
+	if (pkg_desc->package.count < 2) {
+		goto cleanup;
+	}
+
+	/* Extract pointers from the input context */
+
+	gpe_device = gpe_info->gpe_device;
+	gpe_block = gpe_info->gpe_block;
+
+	/*
+	 * The _PRW object must return a package, we are only interested
+	 * in the first element
+	 */
+	obj_desc = pkg_desc->package.elements[0];
+
+	if (ACPI_GET_OBJECT_TYPE (obj_desc) == ACPI_TYPE_INTEGER) {
+		/* Use FADT-defined GPE device (from definition of _PRW) */
+
+		target_gpe_device = acpi_gbl_fadt_gpe_device;
+
+		/* Integer is the GPE number in the FADT described GPE blocks */
+
+		gpe_number = (u32) obj_desc->integer.value;
+	}
+	else if (ACPI_GET_OBJECT_TYPE (obj_desc) == ACPI_TYPE_PACKAGE) {
+		/* Package contains a GPE reference and GPE number within a GPE block */
+
+		if ((obj_desc->package.count < 2) ||
+			(ACPI_GET_OBJECT_TYPE (obj_desc->package.elements[0]) != ACPI_TYPE_LOCAL_REFERENCE) ||
+			(ACPI_GET_OBJECT_TYPE (obj_desc->package.elements[1]) != ACPI_TYPE_INTEGER)) {
+			goto cleanup;
+		}
+
+		/* Get GPE block reference and decode */
+
+		target_gpe_device = obj_desc->package.elements[0]->reference.node;
+		gpe_number = (u32) obj_desc->package.elements[1]->integer.value;
+	}
+	else {
+		/* Unknown type, just ignore it */
+
+		goto cleanup;
+	}
+
+	/*
+	 * Is this GPE within this block?
+	 *
+	 * TRUE iff these conditions are true:
+	 *     1) The GPE devices match.
+	 *     2) The GPE index(number) is within the range of the Gpe Block
+	 *          associated with the GPE device.
+	 */
+	if ((gpe_device == target_gpe_device) &&
+		(gpe_number >= gpe_block->block_base_number) &&
+		(gpe_number < gpe_block->block_base_number + (gpe_block->register_count * 8))) {
+		/* Mark GPE for WAKE but DISABLED (even for wake) */
+
+		gpe_event_info = &gpe_block->event_info[gpe_number - gpe_block->block_base_number];
+		gpe_event_info->flags |= ACPI_GPE_TYPE_WAKE;
+	}
+
+cleanup:
+	acpi_ut_remove_reference (pkg_desc);
+
+	return_ACPI_STATUS (status);
+}
+
+
 /*******************************************************************************
  *
  * FUNCTION:    acpi_ev_get_gpe_xrupt_block
@@ -695,8 +809,13 @@ acpi_ev_create_gpe_block (
 	struct acpi_gpe_block_info      **return_gpe_block)
 {
 	struct acpi_gpe_block_info      *gpe_block;
+	struct acpi_gpe_event_info      *gpe_event_info;
+	acpi_native_uint                i;
+	acpi_native_uint                j;
+	u32                             wake_gpe_count;
+	u32                             gpe_enabled_count;
 	acpi_status                     status;
-
+	struct acpi_gpe_walk_info       gpe_info;
 
 	ACPI_FUNCTION_TRACE ("ev_create_gpe_block");
 
@@ -737,7 +856,8 @@ acpi_ev_create_gpe_block (
 
 	/* Dump info about this GPE block */
 
-	ACPI_DEBUG_PRINT ((ACPI_DB_INIT, "GPE %02d to %02d [%4.4s] %d regs at %8.8X%8.8X on int %d\n",
+	ACPI_DEBUG_PRINT ((ACPI_DB_INIT,
+		"GPE %02d to %02d [%4.4s] %d regs at %8.8X%8.8X on int %d\n",
 		gpe_block->block_base_number,
 		(u32) (gpe_block->block_base_number +
 				((gpe_block->register_count * ACPI_GPE_REGISTER_WIDTH) -1)),
@@ -752,6 +872,58 @@ acpi_ev_create_gpe_block (
 			  ACPI_UINT32_MAX, ACPI_NS_WALK_NO_UNLOCK, acpi_ev_save_method_info,
 			  gpe_block, NULL);
 
+	/*
+	 * Runtime option: Should Wake GPEs be enabled at runtime?  The default is
+	 * No,they should only be enabled just as the machine goes to sleep.
+	 */
+	if (acpi_gbl_leave_wake_gpes_disabled) {
+		/*
+		 * Differentiate RUNTIME vs WAKE GPEs, via the _PRW control methods. (Each
+		 * GPE that has one or more _PRWs that reference it is by definition a
+		 * WAKE GPE and will not be enabled while the machine is running.)
+		 */
+		gpe_info.gpe_block = gpe_block;
+		gpe_info.gpe_device = gpe_device;
+
+		status = acpi_ns_walk_namespace (ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+				  ACPI_UINT32_MAX, ACPI_NS_WALK_UNLOCK, acpi_ev_get_gpe_type,
+				  &gpe_info, NULL);
+	}
+
+	/*
+	 * Enable all GPEs in this block that are 1) "runtime" GPEs, and 2) have
+	 * a corresponding _Lxx or _Exx method.  All other GPEs must be enabled via
+	 * the acpi_enable_gpe() external interface.
+	 */
+	wake_gpe_count = 0;
+	gpe_enabled_count = 0;
+
+	for (i = 0; i < gpe_block->register_count; i++) {
+		for (j = 0; j < 8; j++) {
+			/* Get the info block for this particular GPE */
+
+			gpe_event_info = &gpe_block->event_info[(i * ACPI_GPE_REGISTER_WIDTH) + j];
+			if ((gpe_event_info->method_node) &&
+			   ((gpe_event_info->flags & ACPI_GPE_TYPE_MASK) == ACPI_GPE_TYPE_RUNTIME)) {
+				/* Enable this GPE, it is 1) RUNTIME and 2) has an _Lxx or _Exx method */
+
+				status = acpi_hw_enable_gpe (gpe_event_info);
+				if (ACPI_FAILURE (status)) {
+					return_ACPI_STATUS (status);
+				}
+				gpe_enabled_count++;
+			}
+
+			if ((gpe_event_info->flags & ACPI_GPE_TYPE_MASK) == ACPI_GPE_TYPE_WAKE) {
+				wake_gpe_count++;
+			}
+		}
+	}
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_INIT,
+			"Found %u Wake, Enabled %u Runtime GPEs in this block\n",
+			wake_gpe_count, gpe_enabled_count));
+
 	/* Return the new block */
 
 	if (return_gpe_block) {
@@ -775,27 +947,25 @@ acpi_ev_create_gpe_block (
  ******************************************************************************/
 
 acpi_status
-acpi_ev_gpe_initialize (void)
+acpi_ev_gpe_initialize (
+	void)
 {
 	u32                             register_count0 = 0;
 	u32                             register_count1 = 0;
 	u32                             gpe_number_max = 0;
-	acpi_handle                     gpe_device;
 	acpi_status                     status;
 
 
 	ACPI_FUNCTION_TRACE ("ev_gpe_initialize");
 
 
-	/* Get a handle to the predefined _GPE object */
-
-	status = acpi_get_handle (NULL, "\\_GPE", &gpe_device);
+	status = acpi_ut_acquire_mutex (ACPI_MTX_NAMESPACE);
 	if (ACPI_FAILURE (status)) {
 		return_ACPI_STATUS (status);
 	}
 
 	/*
-	 * Initialize the GPE Blocks defined in the FADT
+	 * Initialize the GPE Block(s) defined in the FADT
 	 *
 	 * Why the GPE register block lengths are divided by 2:  From the ACPI Spec,
 	 * section "General-Purpose Event Registers", we have:
@@ -829,8 +999,9 @@ acpi_ev_gpe_initialize (void)
 
 		/* Install GPE Block 0 */
 
-		status = acpi_ev_create_gpe_block (gpe_device, &acpi_gbl_FADT->xgpe0_blk,
+		status = acpi_ev_create_gpe_block (acpi_gbl_fadt_gpe_device, &acpi_gbl_FADT->xgpe0_blk,
 				 register_count0, 0, acpi_gbl_FADT->sci_int, &acpi_gbl_gpe_fadt_blocks[0]);
+
 		if (ACPI_FAILURE (status)) {
 			ACPI_REPORT_ERROR ((
 				"Could not create GPE Block 0, %s\n",
@@ -861,9 +1032,10 @@ acpi_ev_gpe_initialize (void)
 		else {
 			/* Install GPE Block 1 */
 
-			status = acpi_ev_create_gpe_block (gpe_device, &acpi_gbl_FADT->xgpe1_blk,
+			status = acpi_ev_create_gpe_block (acpi_gbl_fadt_gpe_device, &acpi_gbl_FADT->xgpe1_blk,
 					 register_count1, acpi_gbl_FADT->gpe1_base,
 					 acpi_gbl_FADT->sci_int, &acpi_gbl_gpe_fadt_blocks[1]);
+
 			if (ACPI_FAILURE (status)) {
 				ACPI_REPORT_ERROR ((
 					"Could not create GPE Block 1, %s\n",
@@ -885,7 +1057,8 @@ acpi_ev_gpe_initialize (void)
 		/* GPEs are not required by ACPI, this is OK */
 
 		ACPI_REPORT_INFO (("There are no GPE blocks defined in the FADT\n"));
-		return_ACPI_STATUS (AE_OK);
+		status = AE_OK;
+		goto cleanup;
 	}
 
 	/* Check for Max GPE number out-of-range */
@@ -893,9 +1066,12 @@ acpi_ev_gpe_initialize (void)
 	if (gpe_number_max > ACPI_GPE_MAX) {
 		ACPI_REPORT_ERROR (("Maximum GPE number from FADT is too large: 0x%X\n",
 			gpe_number_max));
-		return_ACPI_STATUS (AE_BAD_VALUE);
+		status = AE_BAD_VALUE;
+		goto cleanup;
 	}
 
+cleanup:
+	(void) acpi_ut_release_mutex (ACPI_MTX_NAMESPACE);
 	return_ACPI_STATUS (AE_OK);
 }
 

drivers/acpi/events/evmisc.c

@@ -97,6 +97,20 @@ acpi_ev_is_notify_object (
  *
  ******************************************************************************/
 
+#ifdef ACPI_DEBUG_OUTPUT
+static const char                *acpi_notify_value_names[] =
+{
+	"Bus Check",
+	"Device Check",
+	"Device Wake",
+	"Eject request",
+	"Device Check Light",
+	"Frequency Mismatch",
+	"Bus Mode Mismatch",
+	"Power Fault"
+};
+#endif
+
 acpi_status
 acpi_ev_queue_notify_request (
 	struct acpi_namespace_node      *node,
@@ -112,7 +126,7 @@ acpi_ev_queue_notify_request (
 
 
 	/*
-	 * For value 1 (Ejection Request), some device method may need to be run.
+	 * For value 3 (Ejection Request), some device method may need to be run.
 	 * For value 2 (Device Wake) if _PRW exists, the _PS0 method may need to be run.
 	 * For value 0x80 (Status Change) on the power button or sleep button,
 	 * initiate soft-off or sleep operation?
@@ -120,26 +134,13 @@ acpi_ev_queue_notify_request (
 	ACPI_DEBUG_PRINT ((ACPI_DB_INFO,
 		"Dispatching Notify(%X) on node %p\n", notify_value, node));
 
-	switch (notify_value) {
-	case 0:
-		ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "Notify value: Re-enumerate Devices\n"));
-		break;
-
-	case 1:
-		ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "Notify value: Ejection Request\n"));
-		break;
-
-	case 2:
-		ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "Notify value: Device Wake\n"));
-		break;
-
-	case 0x80:
-		ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "Notify value: Status Change\n"));
-		break;
-
-	default:
-		ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "Unknown Notify Value: %X \n", notify_value));
-		break;
+	if (notify_value <= 7) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "Notify value: %s\n",
+				acpi_notify_value_names[notify_value]));
+	}
+	else {
+		ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "notify value: 0x2.2_x **Device Specific**\n",
+				notify_value));
 	}
 
 	/*

drivers/acpi/events/evxfevnt.c

@@ -247,16 +247,29 @@ acpi_enable_gpe (
 		goto unlock_and_exit;
 	}
 
-	/* Enable the requested GPE number */
-
-	status = acpi_hw_enable_gpe (gpe_event_info);
-	if (ACPI_FAILURE (status)) {
-		goto unlock_and_exit;
-	}
+	/* Check for Wake vs Runtime GPE */
 
 	if (flags & ACPI_EVENT_WAKE_ENABLE) {
+		/* Ensure the requested wake GPE is disabled */
+
+		status = acpi_hw_disable_gpe (gpe_event_info);
+		if (ACPI_FAILURE (status)) {
+			goto unlock_and_exit;
+		}
+
+		/* Defer Enable of Wake GPE until sleep time */
+
 		acpi_hw_enable_gpe_for_wakeup (gpe_event_info);
 	}
+	else {
+		/* Enable the requested runtime GPE  */
+
+		status = acpi_hw_enable_gpe (gpe_event_info);
+		if (ACPI_FAILURE (status)) {
+			goto unlock_and_exit;
+		}
+	}
+
 
 unlock_and_exit:
 	if (flags & ACPI_NOT_ISR) {

drivers/acpi/executer/excreate.c

@@ -84,14 +84,15 @@ acpi_ex_create_alias (
 	alias_node = (struct acpi_namespace_node *) walk_state->operands[0];
 	target_node = (struct acpi_namespace_node *) walk_state->operands[1];
 
-	if (target_node->type == ACPI_TYPE_LOCAL_ALIAS) {
+	if ((target_node->type == ACPI_TYPE_LOCAL_ALIAS) ||
+		(target_node->type == ACPI_TYPE_LOCAL_METHOD_ALIAS)) {
 		/*
 		 * Dereference an existing alias so that we don't create a chain
 		 * of aliases.  With this code, we guarantee that an alias is
 		 * always exactly one level of indirection away from the
 		 * actual aliased name.
 		 */
-		target_node = (struct acpi_namespace_node *) target_node->object;
+		target_node = ACPI_CAST_PTR (struct acpi_namespace_node, target_node->object);
 	}
 
 	/*
@@ -117,6 +118,17 @@ acpi_ex_create_alias (
 		alias_node->object = ACPI_CAST_PTR (union acpi_operand_object, target_node);
 		break;
 
+	case ACPI_TYPE_METHOD:
+
+		/*
+		 * The new alias has the type ALIAS and points to the original
+		 * NS node, not the object itself.  This is because for these
+		 * types, the object can change dynamically via a Store.
+		 */
+		alias_node->type = ACPI_TYPE_LOCAL_METHOD_ALIAS;
+		alias_node->object = ACPI_CAST_PTR (union acpi_operand_object, target_node);
+		break;
+
 	default:
 
 		/* Attach the original source object to the new Alias Node */

drivers/acpi/executer/exdump.c

@@ -774,6 +774,7 @@ acpi_ex_dump_object_descriptor (
 
 
 	case ACPI_TYPE_LOCAL_ALIAS:
+	case ACPI_TYPE_LOCAL_METHOD_ALIAS:
 	case ACPI_TYPE_LOCAL_EXTRA:
 	case ACPI_TYPE_LOCAL_DATA:
 	default:

drivers/acpi/executer/exresnte.c

@@ -108,10 +108,11 @@ acpi_ex_resolve_node_to_value (
 	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Entry=%p source_desc=%p [%s]\n",
 		 node, source_desc, acpi_ut_get_type_name (entry_type)));
 
-	if (entry_type == ACPI_TYPE_LOCAL_ALIAS) {
+	if ((entry_type == ACPI_TYPE_LOCAL_ALIAS) ||
+		(entry_type == ACPI_TYPE_LOCAL_METHOD_ALIAS)) {
 		/* There is always exactly one level of indirection */
 
-		node       = (struct acpi_namespace_node *) node->object;
+		node       = ACPI_CAST_PTR (struct acpi_namespace_node, node->object);
 		source_desc = acpi_ns_get_attached_object (node);
 		entry_type = acpi_ns_get_type ((acpi_handle) node);
 		*object_ptr = node;

drivers/acpi/executer/exstoren.c

@@ -138,6 +138,7 @@ acpi_ex_resolve_object (
 
 
 	case ACPI_TYPE_LOCAL_ALIAS:
+	case ACPI_TYPE_LOCAL_METHOD_ALIAS:
 
 		/*
 		 * Aliases are resolved by acpi_ex_prep_operands

drivers/acpi/hardware/hwgpe.c

@@ -53,9 +53,9 @@
  *
  * FUNCTION:    acpi_hw_enable_gpe
  *
- * PARAMETERS:  gpe_number      - The GPE
+ * PARAMETERS:  gpe_event_info      - Info block for the GPE to be enabled
  *
- * RETURN:      None
+ * RETURN:      Status
  *
  * DESCRIPTION: Enable a single GPE.
  *
@@ -95,7 +95,7 @@ acpi_hw_enable_gpe (
  *
  * FUNCTION:    acpi_hw_enable_gpe_for_wakeup
  *
- * PARAMETERS:  gpe_number      - The GPE
+ * PARAMETERS:  gpe_event_info      - Info block for the GPE to be enabled
  *
  * RETURN:      None
  *
@@ -122,9 +122,11 @@ acpi_hw_enable_gpe_for_wakeup (
 	}
 
 	/*
-	 * Set the bit so we will not disable this when sleeping
+	 * Set the bit so we will not enable this GPE when sleeping (and disable
+	 * it upon wake)
 	 */
 	gpe_register_info->wake_enable |= gpe_event_info->bit_mask;
+	gpe_event_info->flags |= (ACPI_GPE_TYPE_WAKE | ACPI_GPE_ENABLED);
 }
 
 
@@ -132,9 +134,9 @@ acpi_hw_enable_gpe_for_wakeup (
  *
  * FUNCTION:    acpi_hw_disable_gpe
  *
- * PARAMETERS:  gpe_number      - The GPE
+ * PARAMETERS:  gpe_event_info      - Info block for the GPE to be disabled
  *
- * RETURN:      None
+ * RETURN:      Status
  *
  * DESCRIPTION: Disable a single GPE.
  *
@@ -177,6 +179,8 @@ acpi_hw_disable_gpe (
 		return (status);
 	}
 
+	/* Make sure this GPE is disabled for wake, also */
+
 	acpi_hw_disable_gpe_for_wakeup (gpe_event_info);
 	return (AE_OK);
 }
@@ -186,7 +190,7 @@ acpi_hw_disable_gpe (
  *
  * FUNCTION:    acpi_hw_disable_gpe_for_wakeup
  *
- * PARAMETERS:  gpe_number      - The GPE
+ * PARAMETERS:  gpe_event_info      - Info block for the GPE to be disabled
  *
  * RETURN:      None
  *
@@ -212,9 +216,8 @@ acpi_hw_disable_gpe_for_wakeup (
 		return;
 	}
 
-	/*
-	 * Clear the bit so we will disable this when sleeping
-	 */
+	/* Clear the bit so we will disable this when sleeping */
+
 	gpe_register_info->wake_enable &= ~(gpe_event_info->bit_mask);
 }
 
@@ -223,11 +226,11 @@ acpi_hw_disable_gpe_for_wakeup (
  *
  * FUNCTION:    acpi_hw_clear_gpe
  *
- * PARAMETERS:  gpe_number      - The GPE
+ * PARAMETERS:  gpe_event_info      - Info block for the GPE to be cleared
  *
- * RETURN:      None
+ * RETURN:      status_status
  *
- * DESCRIPTION: Clear a single GPE.
+ * DESCRIPTION: Clear the status bit for a single GPE.
  *
  ******************************************************************************/
 
@@ -256,9 +259,10 @@ acpi_hw_clear_gpe (
  *
  * FUNCTION:    acpi_hw_get_gpe_status
  *
- * PARAMETERS:  gpe_number      - The GPE
+ * PARAMETERS:  gpe_event_info      - Info block for the GPE to queried
+ *              event_status        - Where the GPE status is returned
  *
- * RETURN:      None
+ * RETURN:      Status
  *
  * DESCRIPTION: Return the status of a single GPE.
  *
@@ -376,7 +380,7 @@ acpi_hw_disable_gpe_block (
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Clear all GPEs within a GPE block
+ * DESCRIPTION: Clear status bits for all GPEs within a GPE block
  *
  ******************************************************************************/
 
@@ -392,7 +396,7 @@ acpi_hw_clear_gpe_block (
 	/* Examine each GPE Register within the block */
 
 	for (i = 0; i < gpe_block->register_count; i++) {
-		/* Clear all GPEs in this register */
+		/* Clear status on all GPEs in this register */
 
 		status = acpi_hw_low_level_write (8, 0xFF,
 				 &gpe_block->register_info[i].status_address);
@@ -407,19 +411,20 @@ acpi_hw_clear_gpe_block (
 
 /******************************************************************************
  *
- * FUNCTION:    acpi_hw_disable_non_wakeup_gpe_block
+ * FUNCTION:    acpi_hw_prepare_gpe_block_for_sleep
  *
  * PARAMETERS:  gpe_xrupt_info      - GPE Interrupt info
  *              gpe_block           - Gpe Block info
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Disable all GPEs except wakeup GPEs in a GPE block
+ * DESCRIPTION: Disable all runtime GPEs and enable all wakeup GPEs -- within
+ *              a single GPE block
  *
  ******************************************************************************/
 
 static acpi_status
-acpi_hw_disable_non_wakeup_gpe_block (
+acpi_hw_prepare_gpe_block_for_sleep (
 	struct acpi_gpe_xrupt_info      *gpe_xrupt_info,
 	struct acpi_gpe_block_info      *gpe_block)
 {
@@ -437,8 +442,11 @@ acpi_hw_disable_non_wakeup_gpe_block (
 
 	for (i = 0; i < gpe_block->register_count; i++) {
 		/*
-		 * Read the enabled status of all GPEs. We
+		 * Read the enabled/disabled status of all GPEs. We
 		 * will be using it to restore all the GPEs later.
+		 *
+		 * NOTE:  Wake GPEs are are ALL disabled at this time, so when we wake
+		 * and restore this register, they will be automatically disabled.
 		 */
 		status = acpi_hw_low_level_read (8, &in_value,
 				 &gpe_register_info->enable_address);
@@ -449,7 +457,8 @@ acpi_hw_disable_non_wakeup_gpe_block (
 		gpe_register_info->enable = (u8) in_value;
 
 		/*
-		 * Disable all GPEs except wakeup GPEs.
+		 * 1) Disable all runtime GPEs
+		 * 2) Enable all wakeup GPEs
 		 */
 		status = acpi_hw_low_level_write (8, gpe_register_info->wake_enable,
 				&gpe_register_info->enable_address);
@@ -457,6 +466,8 @@ acpi_hw_disable_non_wakeup_gpe_block (
 			return (status);
 		}
 
+		/* Point to next GPE register */
+
 		gpe_register_info++;
 	}
 
@@ -466,22 +477,22 @@ acpi_hw_disable_non_wakeup_gpe_block (
 
 /******************************************************************************
  *
- * FUNCTION:    acpi_hw_disable_non_wakeup_gpes
+ * FUNCTION:    acpi_hw_prepare_gpes_for_sleep
  *
  * PARAMETERS:  None
  *
- * RETURN:      None
+ * RETURN:      Status
  *
- * DESCRIPTION: Disable all non-wakeup GPEs
+ * DESCRIPTION: Disable all runtime GPEs, enable all wake GPEs.
  *              Called with interrupts disabled. The interrupt handler also
  *              modifies gpe_register_info->Enable, so it should not be
- *              given the chance to run until after non-wake GPEs are
+ *              given the chance to run until after the runtime GPEs are
  *              re-enabled.
  *
  ******************************************************************************/
 
 acpi_status
-acpi_hw_disable_non_wakeup_gpes (
+acpi_hw_prepare_gpes_for_sleep (
 	void)
 {
 	acpi_status                     status;
@@ -490,27 +501,27 @@ acpi_hw_disable_non_wakeup_gpes (
 	ACPI_FUNCTION_ENTRY ();
 
 
-	status = acpi_ev_walk_gpe_list (acpi_hw_disable_non_wakeup_gpe_block);
-
+	status = acpi_ev_walk_gpe_list (acpi_hw_prepare_gpe_block_for_sleep);
 	return (status);
 }
 
 
 /******************************************************************************
  *
- * FUNCTION:    acpi_hw_enable_non_wakeup_gpe_block
+ * FUNCTION:    acpi_hw_restore_gpe_block_on_wake
  *
  * PARAMETERS:  gpe_xrupt_info      - GPE Interrupt info
  *              gpe_block           - Gpe Block info
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Enable a single GPE.
+ * DESCRIPTION: Enable all runtime GPEs and disable all wake GPEs -- in one
+ *              GPE block
  *
  ******************************************************************************/
 
 static acpi_status
-acpi_hw_enable_non_wakeup_gpe_block (
+acpi_hw_restore_gpe_block_on_wake (
 	struct acpi_gpe_xrupt_info      *gpe_xrupt_info,
 	struct acpi_gpe_block_info      *gpe_block)
 {
@@ -537,8 +548,12 @@ acpi_hw_enable_non_wakeup_gpe_block (
 		}
 
 		/*
-		 * We previously stored the enabled status of all GPEs.
-		 * Blast them back in.
+		 * Restore the GPE Enable register, which will do the following:
+		 *
+		 * 1) Disable all wakeup GPEs
+		 * 2) Enable all runtime GPEs
+		 *
+		 *  (On sleep, we saved the enabled status of all GPEs)
 		 */
 		status = acpi_hw_low_level_write (8, gpe_register_info->enable,
 				 &gpe_register_info->enable_address);
@@ -546,28 +561,30 @@ acpi_hw_enable_non_wakeup_gpe_block (
 			return (status);
 		}
 
+		/* Point to next GPE register */
+
 		gpe_register_info++;
 	}
 
-
 	return (AE_OK);
 }
 
 
 /******************************************************************************
  *
- * FUNCTION:    acpi_hw_enable_non_wakeup_gpes
+ * FUNCTION:    acpi_hw_restore_gpes_on_wake
  *
  * PARAMETERS:  None
  *
- * RETURN:      None
+ * RETURN:      Status
  *
- * DESCRIPTION: Enable all non-wakeup GPEs we previously enabled.
+ * DESCRIPTION: Enable all runtime GPEs and disable all wake GPEs -- in all
+ *              GPE blocks
  *
  ******************************************************************************/
 
 acpi_status
-acpi_hw_enable_non_wakeup_gpes (
+acpi_hw_restore_gpes_on_wake (
 	void)
 {
 	acpi_status                     status;
@@ -576,7 +593,6 @@ acpi_hw_enable_non_wakeup_gpes (
 	ACPI_FUNCTION_ENTRY ();
 
 
-	status = acpi_ev_walk_gpe_list (acpi_hw_enable_non_wakeup_gpe_block);
-
+	status = acpi_ev_walk_gpe_list (acpi_hw_restore_gpe_block_on_wake);
 	return (status);
 }

drivers/acpi/hardware/hwsleep.c

@@ -286,7 +286,11 @@ acpi_enter_sleep_state (
 		}
 	}
 
-	status = acpi_hw_disable_non_wakeup_gpes ();
+	/*
+	 * 1) Disable all runtime GPEs
+	 * 2) Enable all wakeup GPEs
+	 */
+	status = acpi_hw_prepare_gpes_for_sleep ();
 	if (ACPI_FAILURE (status)) {
 		return_ACPI_STATUS (status);
 	}
@@ -415,7 +419,11 @@ acpi_enter_sleep_state_s4bios (
 		return_ACPI_STATUS (status);
 	}
 
-	status = acpi_hw_disable_non_wakeup_gpes ();
+	/*
+	 * 1) Disable all runtime GPEs
+	 * 2) Enable all wakeup GPEs
+	 */
+	status = acpi_hw_prepare_gpes_for_sleep ();
 	if (ACPI_FAILURE (status)) {
 		return_ACPI_STATUS (status);
 	}
@@ -528,10 +536,14 @@ acpi_leave_sleep_state (
 	if (ACPI_FAILURE (status) && status != AE_NOT_FOUND) {
 		ACPI_REPORT_ERROR (("Method _WAK failed, %s\n", acpi_format_exception (status)));
 	}
+	/* TBD: _WAK "sometimes" returns stuff - do we want to look at it? */
 
-	/* _WAK returns stuff - do we want to look at it? */
-
-	status = acpi_hw_enable_non_wakeup_gpes ();
+	/*
+	 * Restore the GPEs:
+	 * 1) Disable all wakeup GPEs
+	 * 2) Enable all runtime GPEs
+	 */
+	status = acpi_hw_restore_gpes_on_wake ();
 	if (ACPI_FAILURE (status)) {
 		return_ACPI_STATUS (status);
 	}

drivers/acpi/namespace/nsaccess.c

@@ -247,6 +247,14 @@ acpi_ns_root_initialize (void)
 
 unlock_and_exit:
 	(void) acpi_ut_release_mutex (ACPI_MTX_NAMESPACE);
+
+	/* Save a handle to "_GPE", it is always present */
+
+	if (ACPI_SUCCESS (status)) {
+		status = acpi_ns_get_node_by_path ("\\_GPE", NULL, ACPI_NS_NO_UPSEARCH,
+				  &acpi_gbl_fadt_gpe_device);
+	}
+
 	return_ACPI_STATUS (status);
 }
 
@@ -577,6 +585,7 @@ acpi_ns_lookup (
 		if ((num_segments       == 0)                               &&
 			(type_to_check_for  != ACPI_TYPE_ANY)                   &&
 			(type_to_check_for  != ACPI_TYPE_LOCAL_ALIAS)           &&
+			(type_to_check_for  != ACPI_TYPE_LOCAL_METHOD_ALIAS)    &&
 			(type_to_check_for  != ACPI_TYPE_LOCAL_SCOPE)           &&
 			(this_node->type    != ACPI_TYPE_ANY)                   &&
 			(this_node->type    != type_to_check_for)) {

drivers/acpi/namespace/nsdump.c

@@ -351,6 +351,7 @@ acpi_ns_dump_one_object (
 
 
 		case ACPI_TYPE_LOCAL_ALIAS:
+		case ACPI_TYPE_LOCAL_METHOD_ALIAS:
 
 			acpi_os_printf ("Target %4.4s (%p)\n", acpi_ut_get_node_name (obj_desc), obj_desc);
 			break;

drivers/acpi/namespace/nseval.c

@@ -310,6 +310,15 @@ acpi_ns_evaluate_by_handle (
 		return_ACPI_STATUS (AE_BAD_PARAMETER);
 	}
 
+	/*
+	 * For a method alias, we must grab the actual method node
+	 * so that proper scoping context will be established
+	 * before execution.
+	 */
+	if (acpi_ns_get_type (node) == ACPI_TYPE_LOCAL_METHOD_ALIAS) {
+		node = ACPI_CAST_PTR (struct acpi_namespace_node, node->object);
+	}
+
 	/*
 	 * Two major cases here:
 	 * 1) The object is an actual control method -- execute it.

drivers/acpi/namespace/nssearch.c

@@ -113,6 +113,12 @@ acpi_ns_search_node (
 		/* Check for match against the name */
 
 		if (next_node->name.integer == target_name) {
+			/* Resolve a control method alias if any */
+
+			if (acpi_ns_get_type (next_node) == ACPI_TYPE_LOCAL_METHOD_ALIAS) {
+				next_node = ACPI_CAST_PTR (struct acpi_namespace_node, next_node->object);
+			}
+
 			/*
 			 * Found matching entry.
 			 */

drivers/acpi/namespace/nsutils.c

@@ -256,7 +256,7 @@ acpi_ns_get_type (
 
 
 	if (!node) {
-		ACPI_REPORT_WARNING (("ns_get_type: Null Node ptr"));
+		ACPI_REPORT_WARNING (("ns_get_type: Null Node input pointer\n"));
 		return_VALUE (ACPI_TYPE_ANY);
 	}
 

drivers/acpi/namespace/nsxfeval.c

@@ -45,6 +45,7 @@
 
 #include <acpi/acpi.h>
 #include <acpi/acnamesp.h>
+#include <acpi/acinterp.h>
 
 
 #define _COMPONENT          ACPI_NAMESPACE
@@ -149,11 +150,11 @@ acpi_evaluate_object_typed (
  * FUNCTION:    acpi_evaluate_object
  *
  * PARAMETERS:  Handle              - Object handle (optional)
- *              *Pathname           - Object pathname (optional)
- *              **external_params   - List of parameters to pass to method,
+ *              Pathname            - Object pathname (optional)
+ *              external_params     - List of parameters to pass to method,
  *                                    terminated by NULL.  May be NULL
  *                                    if no parameters are being passed.
- *              *return_buffer      - Where to put method's return value (if
+ *              return_buffer       - Where to put method's return value (if
  *                                    any).  If NULL, no value is returned.
  *
  * RETURN:      Status
@@ -172,6 +173,7 @@ acpi_evaluate_object (
 	struct acpi_buffer              *return_buffer)
 {
 	acpi_status                     status;
+	acpi_status                     status2;
 	union acpi_operand_object       **internal_params = NULL;
 	union acpi_operand_object       *internal_return_obj = NULL;
 	acpi_size                       buffer_space_needed;
@@ -203,7 +205,7 @@ acpi_evaluate_object (
 		 */
 		for (i = 0; i < external_params->count; i++) {
 			status = acpi_ut_copy_eobject_to_iobject (&external_params->pointer[i],
-					 &internal_params[i]);
+					  &internal_params[i]);
 			if (ACPI_FAILURE (status)) {
 				acpi_ut_delete_internal_object_list (internal_params);
 				return_ACPI_STATUS (status);
@@ -321,14 +323,20 @@ acpi_evaluate_object (
 		}
 	}
 
-	/* Delete the return and parameter objects */
-
 	if (internal_return_obj) {
 		/*
-		 * Delete the internal return object. (Or at least
-		 * decrement the reference count by one)
+		 * Delete the internal return object.  NOTE: Interpreter
+		 * must be locked to avoid race condition.
 		 */
-		acpi_ut_remove_reference (internal_return_obj);
+		status2 = acpi_ex_enter_interpreter ();
+		if (ACPI_SUCCESS (status2)) {
+			/*
+			 * Delete the internal return object. (Or at least
+			 * decrement the reference count by one)
+			 */
+			acpi_ut_remove_reference (internal_return_obj);
+			acpi_ex_exit_interpreter ();
+		}
 	}
 
 	/*

drivers/acpi/osl.c

@@ -1048,3 +1048,24 @@ acpi_serialize_setup(char *str)
 
 __setup("acpi_serialize", acpi_serialize_setup);
 
+/*
+ * Wake and Run-Time GPES are expected to be separate.
+ * We disable wake-GPEs at run-time to prevent spurious
+ * interrupts.
+ *
+ * However, if a system exists that shares Wake and
+ * Run-time events on the same GPE this flag is available
+ * to tell Linux to keep the wake-time GPEs enabled at run-time.
+ */
+int __init
+acpi_wake_gpes_always_on_setup(char *str)
+{
+	printk(KERN_INFO PREFIX "wake GPEs not disabled\n");
+
+	acpi_gbl_leave_wake_gpes_disabled = FALSE;
+
+	return 1;
+}
+
+__setup("acpi_wake_gpes_always_on", acpi_wake_gpes_always_on_setup);
+

drivers/acpi/pci_link.c

@@ -72,6 +72,7 @@ struct acpi_pci_link_irq {
 	u8			edge_level;		/* All IRQs */
 	u8			active_high_low;	/* All IRQs */
 	u8			setonboot;
+	u8			resource_type;
 	u8			possible_count;
 	u8			possible[ACPI_PCI_LINK_MAX_POSSIBLE];
 };
@@ -123,6 +124,7 @@ acpi_pci_link_check_possible (
 		}
 		link->irq.edge_level = p->edge_level;
 		link->irq.active_high_low = p->active_high_low;
+		link->irq.resource_type = ACPI_RSTYPE_IRQ;
 		break;
 	}
 	case ACPI_RSTYPE_EXT_IRQ:
@@ -143,6 +145,7 @@ acpi_pci_link_check_possible (
 		}
 		link->irq.edge_level = p->edge_level;
 		link->irq.active_high_low = p->active_high_low;
+		link->irq.resource_type = ACPI_RSTYPE_EXT_IRQ;
 		break;
 	}
 	default:
@@ -342,13 +345,18 @@ acpi_pci_link_set (
 		}
 	}
 
+	resource_type = link->irq.resource_type;
+
+	if (resource_type != ACPI_RSTYPE_IRQ &&
+			resource_type != ACPI_RSTYPE_EXT_IRQ){
 	/* If IRQ<=15, first try with a "normal" IRQ descriptor. If that fails, try with
 	 * an extended one */
-	if (irq <= 15) {
-		resource_type = ACPI_RSTYPE_IRQ;
-	} else {
-		resource_type = ACPI_RSTYPE_EXT_IRQ;
-	}
+		if (irq <= 15) {
+			resource_type = ACPI_RSTYPE_IRQ;
+		} else {
+			resource_type = ACPI_RSTYPE_EXT_IRQ;
+		}
+	} 
 
 retry_programming:
    

drivers/acpi/resources/rsaddr.c

@@ -88,6 +88,7 @@ acpi_rs_address16_resource (
 
 	ACPI_FUNCTION_TRACE ("rs_address16_resource");
 
+
 	/*
 	 * Point past the Descriptor to get the number of bytes consumed
 	 */
@@ -149,7 +150,7 @@ acpi_rs_address16_resource (
 		output_struct->data.address16.attribute.memory.read_write_attribute =
 				(u16) (temp8 & 0x01);
 		output_struct->data.address16.attribute.memory.cache_attribute =
-				(u16) ((temp8 >> 1) & 0x0F);
+				(u16) ((temp8 >> 1) & 0x03);
 	}
 	else {
 		if (ACPI_IO_RANGE == output_struct->data.address16.resource_type) {
@@ -347,7 +348,7 @@ acpi_rs_address16_stream (
 
 		temp8 |=
 			(linked_list->data.address16.attribute.memory.cache_attribute &
-			 0x0F) << 1;
+			 0x03) << 1;
 	}
 	else if (ACPI_IO_RANGE == linked_list->data.address16.resource_type) {
 		temp8 = (u8)
@@ -539,7 +540,7 @@ acpi_rs_address32_resource (
 				(u16) (temp8 & 0x01);
 
 		output_struct->data.address32.attribute.memory.cache_attribute =
-				(u16) ((temp8 >> 1) & 0x0F);
+				(u16) ((temp8 >> 1) & 0x03);
 	}
 	else {
 		if (ACPI_IO_RANGE == output_struct->data.address32.resource_type) {
@@ -735,7 +736,7 @@ acpi_rs_address32_stream (
 
 		temp8 |=
 			(linked_list->data.address32.attribute.memory.cache_attribute &
-			 0x0F) << 1;
+			 0x03) << 1;
 	}
 	else if (ACPI_IO_RANGE == linked_list->data.address32.resource_type) {
 		temp8 = (u8)
@@ -926,7 +927,7 @@ acpi_rs_address64_resource (
 				(u16) (temp8 & 0x01);
 
 		output_struct->data.address64.attribute.memory.cache_attribute =
-				(u16) ((temp8 >> 1) & 0x0F);
+				(u16) ((temp8 >> 1) & 0x03);
 	}
 	else {
 		if (ACPI_IO_RANGE == output_struct->data.address64.resource_type) {
@@ -1124,7 +1125,7 @@ acpi_rs_address64_stream (
 
 		temp8 |=
 			(linked_list->data.address64.attribute.memory.cache_attribute &
-			 0x0F) << 1;
+			 0x03) << 1;
 	}
 	else if (ACPI_IO_RANGE == linked_list->data.address64.resource_type) {
 		temp8 = (u8)

drivers/acpi/utilities/utglobal.c

@@ -253,14 +253,15 @@ const u8                                acpi_gbl_ns_properties[] =
 	ACPI_NS_NORMAL,                     /* 19 index_field      */
 	ACPI_NS_NORMAL,                     /* 20 Reference        */
 	ACPI_NS_NORMAL,                     /* 21 Alias            */
-	ACPI_NS_NORMAL,                     /* 22 Notify           */
-	ACPI_NS_NORMAL,                     /* 23 Address Handler  */
-	ACPI_NS_NEWSCOPE | ACPI_NS_LOCAL,   /* 24 Resource Desc    */
-	ACPI_NS_NEWSCOPE | ACPI_NS_LOCAL,   /* 25 Resource Field   */
-	ACPI_NS_NEWSCOPE,                   /* 26 Scope            */
-	ACPI_NS_NORMAL,                     /* 27 Extra            */
-	ACPI_NS_NORMAL,                     /* 28 Data             */
-	ACPI_NS_NORMAL                      /* 29 Invalid          */
+	ACPI_NS_NORMAL,                     /* 22 method_alias     */
+	ACPI_NS_NORMAL,                     /* 23 Notify           */
+	ACPI_NS_NORMAL,                     /* 24 Address Handler  */
+	ACPI_NS_NEWSCOPE | ACPI_NS_LOCAL,   /* 25 Resource Desc    */
+	ACPI_NS_NEWSCOPE | ACPI_NS_LOCAL,   /* 26 Resource Field   */
+	ACPI_NS_NEWSCOPE,                   /* 27 Scope            */
+	ACPI_NS_NORMAL,                     /* 28 Extra            */
+	ACPI_NS_NORMAL,                     /* 29 Data             */
+	ACPI_NS_NORMAL                      /* 30 Invalid          */
 };
 
 
@@ -501,14 +502,15 @@ static const char                   *acpi_gbl_ns_type_names[] = /* printable nam
 	/* 19 */ "index_field",
 	/* 20 */ "Reference",
 	/* 21 */ "Alias",
-	/* 22 */ "Notify",
-	/* 23 */ "addr_handler",
-	/* 24 */ "resource_desc",
-	/* 25 */ "resource_fld",
-	/* 26 */ "Scope",
-	/* 27 */ "Extra",
-	/* 28 */ "Data",
-	/* 39 */ "Invalid"
+	/* 22 */ "method_alias",
+	/* 23 */ "Notify",
+	/* 24 */ "addr_handler",
+	/* 25 */ "resource_desc",
+	/* 26 */ "resource_fld",
+	/* 27 */ "Scope",
+	/* 28 */ "Extra",
+	/* 29 */ "Data",
+	/* 30 */ "Invalid"
 };
 
 
@@ -556,7 +558,7 @@ char *
 acpi_ut_get_node_name (
 	void                            *object)
 {
-	struct acpi_namespace_node      *node;
+	struct acpi_namespace_node      *node = (struct acpi_namespace_node *) object;
 
 
 	if (!object)
@@ -564,7 +566,10 @@ acpi_ut_get_node_name (
 		return ("NULL NODE");
 	}
 
-	node = (struct acpi_namespace_node *) object;
+	if (object == ACPI_ROOT_OBJECT)
+	{
+		node = acpi_gbl_root_node;
+	}
 
 	if (node->descriptor != ACPI_DESC_TYPE_NAMED)
 	{
@@ -782,6 +787,7 @@ acpi_ut_init_globals (
 
 	acpi_gbl_create_osi_method = TRUE;
 	acpi_gbl_all_methods_serialized = FALSE;
+	acpi_gbl_leave_wake_gpes_disabled = TRUE;
 
 	/* Memory allocation and cache lists */
 

drivers/acpi/utilities/utmisc.c

@@ -529,6 +529,7 @@ acpi_ut_strupr (
 	return (src_string);
 }
 
+
 /*******************************************************************************
  *
  * FUNCTION:    acpi_ut_mutex_initialize
@@ -562,10 +563,8 @@ acpi_ut_mutex_initialize (
 		}
 	}
 
-
 	status = acpi_os_create_lock (&acpi_gbl_gpe_lock);
-
-	return_ACPI_STATUS (AE_OK);
+	return_ACPI_STATUS (status);
 }
 
 

include/acpi/acconfig.h

@@ -64,7 +64,7 @@
 
 /* Version string */
 
-#define ACPI_CA_VERSION                 0x20040311
+#define ACPI_CA_VERSION                 0x20040326
 
 /* Maximum objects in the various object caches */
 

include/acpi/acglobal.h

@@ -87,6 +87,7 @@ extern      u32                                 acpi_gbl_nesting_level;
 
 ACPI_EXTERN u8                                  acpi_gbl_create_osi_method;
 ACPI_EXTERN u8                                  acpi_gbl_all_methods_serialized;
+ACPI_EXTERN u8                                  acpi_gbl_leave_wake_gpes_disabled;
 
 /*****************************************************************************
  *
@@ -196,6 +197,7 @@ extern const char                              *acpi_gbl_valid_osi_strings[ACPI_
 
 ACPI_EXTERN struct acpi_namespace_node          acpi_gbl_root_node_struct;
 ACPI_EXTERN struct acpi_namespace_node         *acpi_gbl_root_node;
+ACPI_EXTERN struct acpi_namespace_node         *acpi_gbl_fadt_gpe_device;
 
 extern const u8                                 acpi_gbl_ns_properties[NUM_NS_TYPES];
 extern const struct acpi_predefined_names       acpi_gbl_pre_defined_names [NUM_PREDEFINED_NAMES];

include/acpi/achware.h

@@ -149,11 +149,11 @@ acpi_hw_get_gpe_status (
 	acpi_event_status               *event_status);
 
 acpi_status
-acpi_hw_disable_non_wakeup_gpes (
+acpi_hw_prepare_gpes_for_sleep (
 	void);
 
 acpi_status
-acpi_hw_enable_non_wakeup_gpes (
+acpi_hw_restore_gpes_on_wake (
 	void);
 
 

include/acpi/aclocal.h

@@ -360,6 +360,13 @@ struct acpi_gpe_xrupt_info
 };
 
 
+struct acpi_gpe_walk_info
+{
+	struct acpi_namespace_node              *gpe_device;
+	struct acpi_gpe_block_info              *gpe_block;
+};
+
+
 typedef acpi_status (*ACPI_GPE_CALLBACK) (
 	struct acpi_gpe_xrupt_info      *gpe_xrupt_info,
 	struct acpi_gpe_block_info      *gpe_block);

include/acpi/actypes.h

@@ -413,7 +413,7 @@ typedef u32                                     acpi_table_type;
  * of the ACPI object_type() operator (See the ACPI Spec). Therefore,
  * only add to the first group if the spec changes.
  *
- * Types must be kept in sync with the global acpi_ns_properties
+ * NOTE: Types must be kept in sync with the global acpi_ns_properties
  * and acpi_ns_type_names arrays.
  */
 typedef u32                                     acpi_object_type;
@@ -450,26 +450,27 @@ typedef u32                                     acpi_object_type;
 #define ACPI_TYPE_LOCAL_INDEX_FIELD     0x13
 #define ACPI_TYPE_LOCAL_REFERENCE       0x14  /* Arg#, Local#, Name, Debug, ref_of, Index */
 #define ACPI_TYPE_LOCAL_ALIAS           0x15
-#define ACPI_TYPE_LOCAL_NOTIFY          0x16
-#define ACPI_TYPE_LOCAL_ADDRESS_HANDLER 0x17
-#define ACPI_TYPE_LOCAL_RESOURCE        0x18
-#define ACPI_TYPE_LOCAL_RESOURCE_FIELD  0x19
-#define ACPI_TYPE_LOCAL_SCOPE           0x1A  /* 1 Name, multiple object_list Nodes */
+#define ACPI_TYPE_LOCAL_METHOD_ALIAS    0x16
+#define ACPI_TYPE_LOCAL_NOTIFY          0x17
+#define ACPI_TYPE_LOCAL_ADDRESS_HANDLER 0x18
+#define ACPI_TYPE_LOCAL_RESOURCE        0x19
+#define ACPI_TYPE_LOCAL_RESOURCE_FIELD  0x1A
+#define ACPI_TYPE_LOCAL_SCOPE           0x1B  /* 1 Name, multiple object_list Nodes */
 
-#define ACPI_TYPE_NS_NODE_MAX           0x1A  /* Last typecode used within a NS Node */
+#define ACPI_TYPE_NS_NODE_MAX           0x1B  /* Last typecode used within a NS Node */
 
 /*
  * These are special object types that never appear in
  * a Namespace node, only in an union acpi_operand_object
  */
-#define ACPI_TYPE_LOCAL_EXTRA           0x1B
-#define ACPI_TYPE_LOCAL_DATA            0x1C
+#define ACPI_TYPE_LOCAL_EXTRA           0x1C
+#define ACPI_TYPE_LOCAL_DATA            0x1D
 
-#define ACPI_TYPE_LOCAL_MAX             0x1C
+#define ACPI_TYPE_LOCAL_MAX             0x1D
 
 /* All types above here are invalid */
 
-#define ACPI_TYPE_INVALID               0x1D
+#define ACPI_TYPE_INVALID               0x1E
 #define ACPI_TYPE_NOT_FOUND             0xFF
 
 
@@ -511,9 +512,8 @@ typedef u32                                     acpi_object_type;
 #define ACPI_WRITE                      1
 #define ACPI_IO_MASK                    1
 
-
 /*
- * Acpi Event Types: Fixed & General Purpose
+ * Event Types: Fixed & General Purpose
  */
 typedef u32                                     acpi_event_type;
 
@@ -528,25 +528,8 @@ typedef u32                                     acpi_event_type;
 #define ACPI_EVENT_MAX                  4
 #define ACPI_NUM_FIXED_EVENTS           ACPI_EVENT_MAX + 1
 
-#define ACPI_GPE_INVALID                0xFF
-#define ACPI_GPE_MAX                    0xFF
-#define ACPI_NUM_GPE                    256
-
-#define ACPI_EVENT_LEVEL_TRIGGERED      1
-#define ACPI_EVENT_EDGE_TRIGGERED       2
-
-/*
- * Flags for GPE and Lock interfaces
- */
-#define ACPI_EVENT_WAKE_ENABLE          0x2
-#define ACPI_EVENT_WAKE_DISABLE         0x2
-
-#define ACPI_NOT_ISR                    0x1
-#define ACPI_ISR                        0x0
-
-
 /*
- * acpi_event Status:
+ * Event Status - Per event
  * -------------
  * The encoding of acpi_event_status is illustrated below.
  * Note that a set bit (1) indicates the property is TRUE
@@ -567,6 +550,45 @@ typedef u32                                     acpi_event_status;
 #define ACPI_EVENT_FLAG_WAKE_ENABLED    (acpi_event_status) 0x02
 #define ACPI_EVENT_FLAG_SET             (acpi_event_status) 0x04
 
+/*
+ * General Purpose Events (GPE)
+ */
+#define ACPI_GPE_INVALID                0xFF
+#define ACPI_GPE_MAX                    0xFF
+#define ACPI_NUM_GPE                    256
+
+/*
+ * GPE info flags - Per GPE
+ * +---------+-+-+-+
+ * |Bits 8:3 |2|1|0|
+ * +---------+-+-+-+
+ *          | | | |
+ *          | | | +- Edge or Level Triggered
+ *          | | +--- Type: Wake or Runtime
+ *          | +----- Enabled for wake?
+ *          +--------<Reserved>
+ */
+#define ACPI_GPE_XRUPT_TYPE_MASK        (u8) 1
+#define ACPI_GPE_LEVEL_TRIGGERED        (u8) 1
+#define ACPI_GPE_EDGE_TRIGGERED         (u8) 0
+
+#define ACPI_GPE_TYPE_MASK              (u8) 2
+#define ACPI_GPE_TYPE_WAKE              (u8) 2
+#define ACPI_GPE_TYPE_RUNTIME           (u8) 0       /* Default */
+
+#define ACPI_GPE_ENABLE_MASK            (u8) 4
+#define ACPI_GPE_ENABLED                (u8) 4
+#define ACPI_GPE_DISABLED               (u8) 0       /* Default */
+
+/*
+ * Flags for GPE and Lock interfaces
+ */
+#define ACPI_EVENT_WAKE_ENABLE          0x2
+#define ACPI_EVENT_WAKE_DISABLE         0x2
+
+#define ACPI_NOT_ISR                    0x1
+#define ACPI_ISR                        0x0
+
 
 /* Notify types */
 

include/acpi/acutils.h

@@ -471,6 +471,7 @@ acpi_ut_delete_internal_object_list (
 #define METHOD_NAME__PRT        "_PRT"
 #define METHOD_NAME__CRS        "_CRS"
 #define METHOD_NAME__PRS        "_PRS"
+#define METHOD_NAME__PRW        "_PRW"
 
 
 acpi_status