irqchip/loongson-liointc: Fix IRQ trigger polarity

For the INT_POLARITY register of Loongson-2K series IRQ
controller, '0' indicates high level or rising edge triggered,
'1' indicates low level or falling edge triggered, and we
can find out the information from the Loongson 2K1000LA User
Manual v1.0, Table 9-2, Section 9.3 (中断寄存器描述 / Description
of the Interrupt Registers).

For Loongson-3 CPU series, setting INT_POLARITY register is not
supported and writting it has no effect.

So trigger polarity setting shouled be fixed for Loongson-2K CPU
series.

Fixes: 17343d0b ("irqchip/loongson-liointc: Support to set IRQ type for ACPI path")
Cc: stable@vger.kernel.org
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Co-developed-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230614115936.5950-4-lvjianmin@loongson.cn

drivers/irqchip/irq-loongson-liointc.c

@@ -32,6 +32,10 @@
 #define LIOINTC_REG_INTC_EN_STATUS	(LIOINTC_INTC_CHIP_START + 0x04)
 #define LIOINTC_REG_INTC_ENABLE	(LIOINTC_INTC_CHIP_START + 0x08)
 #define LIOINTC_REG_INTC_DISABLE	(LIOINTC_INTC_CHIP_START + 0x0c)
+/*
+ * LIOINTC_REG_INTC_POL register is only valid for Loongson-2K series, and
+ * Loongson-3 series behave as noops.
+ */
 #define LIOINTC_REG_INTC_POL	(LIOINTC_INTC_CHIP_START + 0x10)
 #define LIOINTC_REG_INTC_EDGE	(LIOINTC_INTC_CHIP_START + 0x14)
 
@@ -116,19 +120,19 @@ static int liointc_set_type(struct irq_data *data, unsigned int type)
 	switch (type) {
 	case IRQ_TYPE_LEVEL_HIGH:
 		liointc_set_bit(gc, LIOINTC_REG_INTC_EDGE, mask, false);
-		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, true);
+		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, false);
 		break;
 	case IRQ_TYPE_LEVEL_LOW:
 		liointc_set_bit(gc, LIOINTC_REG_INTC_EDGE, mask, false);
-		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, false);
+		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, true);
 		break;
 	case IRQ_TYPE_EDGE_RISING:
 		liointc_set_bit(gc, LIOINTC_REG_INTC_EDGE, mask, true);
-		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, true);
+		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, false);
 		break;
 	case IRQ_TYPE_EDGE_FALLING:
 		liointc_set_bit(gc, LIOINTC_REG_INTC_EDGE, mask, true);
-		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, false);
+		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, true);
 		break;
 	default:
 		irq_gc_unlock_irqrestore(gc, flags);