ARM: dts: use macros in clock bindings for exynos5420

The patch replaces magic numbers with macros defined in DT header
in exynos5420 clock bindings.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Documentation/devicetree/bindings/clock/exynos5420-clock.txt

@@ -13,184 +13,12 @@ Required Properties:
 
 - #clock-cells: should be 1.
 
-The following is the list of clocks generated by the controller. Each clock is
-assigned an identifier and client nodes use this identifier to specify the
-clock which they consume.
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
 
-
-       [Core Clocks]
-
-  Clock			ID
-  ----------------------------
-
-  fin_pll		1
-
-  [Clock Gate for Special Clocks]
-
-  Clock			ID
-  ----------------------------
-  sclk_uart0		128
-  sclk_uart1		129
-  sclk_uart2		130
-  sclk_uart3		131
-  sclk_mmc0		132
-  sclk_mmc1		133
-  sclk_mmc2		134
-  sclk_spi0		135
-  sclk_spi1		136
-  sclk_spi2		137
-  sclk_i2s1		138
-  sclk_i2s2		139
-  sclk_pcm1		140
-  sclk_pcm2		141
-  sclk_spdif		142
-  sclk_hdmi		143
-  sclk_pixel		144
-  sclk_dp1		145
-  sclk_mipi1		146
-  sclk_fimd1		147
-  sclk_maudio0		148
-  sclk_maupcm0		149
-  sclk_usbd300		150
-  sclk_usbd301		151
-  sclk_usbphy300	152
-  sclk_usbphy301	153
-  sclk_unipro		154
-  sclk_pwm		155
-  sclk_gscl_wa		156
-  sclk_gscl_wb		157
-  sclk_hdmiphy		158
-
-   [Peripheral Clock Gates]
-
-  Clock			ID
-  ----------------------------
-
-  aclk66_peric		256
-  uart0			257
-  uart1			258
-  uart2			259
-  uart3			260
-  i2c0			261
-  i2c1			262
-  i2c2			263
-  i2c3			264
-  i2c4			265
-  i2c5			266
-  i2c6			267
-  i2c7			268
-  i2c_hdmi		269
-  tsadc			270
-  spi0			271
-  spi1			272
-  spi2			273
-  keyif			274
-  i2s1			275
-  i2s2			276
-  pcm1			277
-  pcm2			278
-  pwm			279
-  spdif			280
-  i2c8			281
-  i2c9			282
-  i2c10			283
-  aclk66_psgen		300
-  chipid		301
-  sysreg		302
-  tzpc0			303
-  tzpc1			304
-  tzpc2			305
-  tzpc3			306
-  tzpc4			307
-  tzpc5			308
-  tzpc6			309
-  tzpc7			310
-  tzpc8			311
-  tzpc9			312
-  hdmi_cec		313
-  seckey		314
-  mct			315
-  wdt			316
-  rtc			317
-  tmu			318
-  tmu_gpu		319
-  pclk66_gpio		330
-  aclk200_fsys2		350
-  mmc0			351
-  mmc1			352
-  mmc2			353
-  sromc			354
-  ufs			355
-  aclk200_fsys		360
-  tsi			361
-  pdma0			362
-  pdma1			363
-  rtic			364
-  usbh20		365
-  usbd300		366
-  usbd301		377
-  aclk400_mscl		380
-  mscl0			381
-  mscl1			382
-  mscl2			383
-  smmu_mscl0		384
-  smmu_mscl1		385
-  smmu_mscl2		386
-  aclk333		400
-  mfc			401
-  smmu_mfcl		402
-  smmu_mfcr		403
-  aclk200_disp1		410
-  dsim1			411
-  dp1			412
-  hdmi			413
-  aclk300_disp1		420
-  fimd1			421
-  smmu_fimd1		422
-  aclk166		430
-  mixer			431
-  aclk266		440
-  rotator		441
-  mdma1			442
-  smmu_rotator		443
-  smmu_mdma1		444
-  aclk300_jpeg		450
-  jpeg			451
-  jpeg2			452
-  smmu_jpeg		453
-  aclk300_gscl		460
-  smmu_gscl0		461
-  smmu_gscl1		462
-  gscl_wa		463
-  gscl_wb		464
-  gscl0			465
-  gscl1			466
-  clk_3aa		467
-  aclk266_g2d		470
-  sss			471
-  slim_sss		472
-  mdma0			473
-  aclk333_g2d		480
-  g2d			481
-  aclk333_432_gscl	490
-  smmu_3aa		491
-  smmu_fimcl0		492
-  smmu_fimcl1		493
-  smmu_fimcl3		494
-  fimc_lite3		495
-  aclk_g3d		500
-  g3d			501
-  smmu_mixer		502
-
-  Mux			ID
-  ----------------------------
-
-  mout_hdmi		640
-
-  Divider		ID
-  ----------------------------
-
-  dout_pixel		768
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5420.h header and can be used in device
+tree sources.
 
 Example 1: An example of a clock controller node is listed below.
 
@@ -208,6 +36,6 @@ Example 2: UART controller node that consumes the clock generated by the clock
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13820000 0x100>;
 		interrupts = <0 54 0>;
-		clocks = <&clock 259>, <&clock 130>;
+		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
 		clock-names = "uart", "clk_uart_baud0";
 	};