Merge tag 'usb-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are some small USB driver fixes and quirk updates for 5.0-rc2.

  The majority here are some quirks for some storage devices to get them
  to work properly. There's also a fix here to resolve the reported
  issues with some audio devices that say they are UAC3 compliant, but
  really are not.

  And a fix up for the MAINTAINERS file to remove a dead url.

  All have been in linux-next with no reported issues"

* tag 'usb-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: storage: Remove outdated URL from MAINTAINERS
  USB: Add USB_QUIRK_DELAY_CTRL_MSG quirk for Corsair K70 RGB
  usbcore: Select only first configuration for non-UAC3 compliant devices
  USB: storage: add quirk for SMI SM3350
  USB: storage: don't insert sane sense for SPC3+ when bad sense specified
  usb: cdc-acm: send ZLP for Telit 3G Intel based modems

MAINTAINERS

@@ -15806,7 +15806,6 @@ M:	Alan Stern <stern@rowland.harvard.edu>
 L:	linux-usb@vger.kernel.org
 L:	usb-storage@lists.one-eyed-alien.net
 S:	Maintained
-W:	http://www.one-eyed-alien.net/~mdharm/linux-usb/
 F:	drivers/usb/storage/
 
 USB MIDI DRIVER

drivers/usb/class/cdc-acm.c

@@ -1865,6 +1865,13 @@ static const struct usb_device_id acm_ids[] = {
 	.driver_info = IGNORE_DEVICE,
 	},
 
+	{ USB_DEVICE(0x1bc7, 0x0021), /* Telit 3G ACM only composition */
+	.driver_info = SEND_ZERO_PACKET,
+	},
+	{ USB_DEVICE(0x1bc7, 0x0023), /* Telit 3G ACM + ECM composition */
+	.driver_info = SEND_ZERO_PACKET,
+	},
+
 	/* control interfaces without any protocol set */
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
 		USB_CDC_PROTO_NONE) },

drivers/usb/core/generic.c

@@ -143,10 +143,13 @@ int usb_choose_configuration(struct usb_device *udev)
 			continue;
 		}
 
-		if (i > 0 && desc && is_audio(desc) && is_uac3_config(desc)) {
+		if (i > 0 && desc && is_audio(desc)) {
+			if (is_uac3_config(desc)) {
 				best = c;
 				break;
 			}
+			continue;
+		}
 
 		/* From the remaining configs, choose the first one whose
 		 * first interface is for a non-vendor-specific class.

drivers/usb/core/quirks.c

@@ -394,7 +394,8 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x1a40, 0x0101), .driver_info = USB_QUIRK_HUB_SLOW_RESET },
 
 	/* Corsair K70 RGB */
-	{ USB_DEVICE(0x1b1c, 0x1b13), .driver_info = USB_QUIRK_DELAY_INIT },
+	{ USB_DEVICE(0x1b1c, 0x1b13), .driver_info = USB_QUIRK_DELAY_INIT |
+	  USB_QUIRK_DELAY_CTRL_MSG },
 
 	/* Corsair Strafe */
 	{ USB_DEVICE(0x1b1c, 0x1b15), .driver_info = USB_QUIRK_DELAY_INIT |

drivers/usb/storage/scsiglue.c

@@ -235,8 +235,12 @@ static int slave_configure(struct scsi_device *sdev)
 		if (!(us->fflags & US_FL_NEEDS_CAP16))
 			sdev->try_rc_10_first = 1;
 
-		/* assume SPC3 or latter devices support sense size > 18 */
-		if (sdev->scsi_level > SCSI_SPC_2)
+		/*
+		 * assume SPC3 or latter devices support sense size > 18
+		 * unless US_FL_BAD_SENSE quirk is specified.
+		 */
+		if (sdev->scsi_level > SCSI_SPC_2 &&
+		    !(us->fflags & US_FL_BAD_SENSE))
 			us->fflags |= US_FL_SANE_SENSE;
 
 		/*

drivers/usb/storage/unusual_devs.h

@@ -1265,6 +1265,18 @@ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
+/*
+ * Reported by Icenowy Zheng <icenowy@aosc.io>
+ * The SMI SM3350 USB-UFS bridge controller will enter a wrong state
+ * that do not process read/write command if a long sense is requested,
+ * so force to use 18-byte sense.
+ */
+UNUSUAL_DEV(  0x090c, 0x3350, 0x0000, 0xffff,
+		"SMI",
+		"SM3350 UFS-to-USB-Mass-Storage bridge",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_BAD_SENSE ),
+
 /*
  * Reported by Paul Hartman <paul.hartman+linux@gmail.com>
  * This card reader returns "Illegal Request, Logical Block Address