Merge remote-tracking branch 'jwb/next' into next

Conflicts:
	arch/powerpc/platforms/40x/ppc40x_simple.c

MAINTAINERS

@@ -4020,7 +4020,7 @@ M:	Josh Boyer <jwboyer@gmail.com>
 M:	Matt Porter <mporter@kernel.crashing.org>
 W:	http://www.penguinppc.org/
 L:	linuxppc-dev@lists.ozlabs.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git
+T:	git git://git.infradead.org/users/jwboyer/powerpc-4xx.git
 S:	Maintained
 F:	arch/powerpc/platforms/40x/
 F:	arch/powerpc/platforms/44x/

arch/powerpc/boot/Makefile

@@ -45,6 +45,7 @@ $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
 $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
 $(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405
+$(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405
 $(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
 
 
@@ -79,7 +80,8 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c
 		cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
 		virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
 		cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c \
-		gamecube-head.S gamecube.c wii-head.S wii.c treeboot-iss4xx.c
+		gamecube-head.S gamecube.c wii-head.S wii.c treeboot-iss4xx.c \
+		treeboot-currituck.c
 src-boot := $(src-wlib) $(src-plat) empty.c
 
 src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -213,6 +215,7 @@ image-$(CONFIG_WARP)			+= cuImage.warp
 image-$(CONFIG_YOSEMITE)		+= cuImage.yosemite
 image-$(CONFIG_ISS4xx)			+= treeImage.iss4xx \
 					   treeImage.iss4xx-mpic
+image-$(CONFIG_CURRITUCK)			+= treeImage.currituck
 
 # Board ports in arch/powerpc/platform/8xx/Kconfig
 image-$(CONFIG_MPC86XADS)		+= cuImage.mpc866ads

arch/powerpc/boot/dcr.h

@@ -9,6 +9,12 @@
 	})
 #define mtdcr(rn, val) \
 	asm volatile("mtdcr %0,%1" : : "i"(rn), "r"(val))
+#define mfdcrx(rn) \
+	({	\
+		unsigned long rval; \
+		asm volatile("mfdcrx %0,%1" : "=r"(rval) : "r"(rn)); \
+		rval; \
+	})
 
 /* 440GP/440GX SDRAM controller DCRs */
 #define DCRN_SDRAM0_CFGADDR				0x010

arch/powerpc/boot/div64.S

@@ -57,3 +57,55 @@ __div64_32:
 	stw	r8,4(r3)
 	mr	r3,r6		# return the remainder in r3
 	blr
+
+/*
+ * Extended precision shifts.
+ *
+ * Updated to be valid for shift counts from 0 to 63 inclusive.
+ * -- Gabriel
+ *
+ * R3/R4 has 64 bit value
+ * R5    has shift count
+ * result in R3/R4
+ *
+ *  ashrdi3: arithmetic right shift (sign propagation)	
+ *  lshrdi3: logical right shift
+ *  ashldi3: left shift
+ */
+	.globl __ashrdi3
+__ashrdi3:
+	subfic	r6,r5,32
+	srw	r4,r4,r5	# LSW = count > 31 ? 0 : LSW >> count
+	addi	r7,r5,32	# could be xori, or addi with -32
+	slw	r6,r3,r6	# t1 = count > 31 ? 0 : MSW << (32-count)
+	rlwinm	r8,r7,0,32	# t3 = (count < 32) ? 32 : 0
+	sraw	r7,r3,r7	# t2 = MSW >> (count-32)
+	or	r4,r4,r6	# LSW |= t1
+	slw	r7,r7,r8	# t2 = (count < 32) ? 0 : t2
+	sraw	r3,r3,r5	# MSW = MSW >> count
+	or	r4,r4,r7	# LSW |= t2
+	blr
+
+	.globl __ashldi3
+__ashldi3:
+	subfic	r6,r5,32
+	slw	r3,r3,r5	# MSW = count > 31 ? 0 : MSW << count
+	addi	r7,r5,32	# could be xori, or addi with -32
+	srw	r6,r4,r6	# t1 = count > 31 ? 0 : LSW >> (32-count)
+	slw	r7,r4,r7	# t2 = count < 32 ? 0 : LSW << (count-32)
+	or	r3,r3,r6	# MSW |= t1
+	slw	r4,r4,r5	# LSW = LSW << count
+	or	r3,r3,r7	# MSW |= t2
+	blr
+
+	.globl __lshrdi3
+__lshrdi3:
+	subfic	r6,r5,32
+	srw	r4,r4,r5	# LSW = count > 31 ? 0 : LSW >> count
+	addi	r7,r5,32	# could be xori, or addi with -32
+	slw	r6,r3,r6	# t1 = count > 31 ? 0 : MSW << (32-count)
+	srw	r7,r3,r7	# t2 = count < 32 ? 0 : MSW >> (count-32)
+	or	r4,r4,r6	# LSW |= t1
+	srw	r3,r3,r5	# MSW = MSW >> count
+	or	r4,r4,r7	# LSW |= t2
+	blr

arch/powerpc/boot/dts/currituck.dts

+/*
+ * Device Tree Source for IBM Embedded PPC 476 Platform
+ *
+ * Copyright © 2011 Tony Breeds IBM Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x01f00000 0x00100000;	// spin table
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "ibm,currituck";
+	compatible = "ibm,currituck";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		serial0 = &UART0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,476";
+			reg = <0>;
+			clock-frequency = <1600000000>; // 1.6 GHz
+			timebase-frequency = <100000000>; // 100Mhz
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "ok";
+		};
+		cpu@1 {
+			device_type = "cpu";
+			model = "PowerPC,476";
+			reg = <1>;
+			clock-frequency = <1600000000>; // 1.6 GHz
+			timebase-frequency = <100000000>; // 100Mhz
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "disabled";
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x01f00000>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x0>; // filled in by zImage
+	};
+
+	MPIC: interrupt-controller {
+		compatible = "chrp,open-pic";
+		interrupt-controller;
+		dcr-reg = <0xffc00000 0x00040000>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+	};
+
+	plb {
+		compatible = "ibm,plb6";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		clock-frequency = <200000000>; // 200Mhz
+
+		POB0: opb {
+			compatible = "ibm,opb-4xx", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* Wish there was a nicer way of specifying a full
+			 * 32-bit range
+			 */
+			ranges = <0x00000000 0x00000200 0x00000000 0x80000000
+				  0x80000000 0x00000200 0x80000000 0x80000000>;
+			clock-frequency = <100000000>;
+
+			UART0: serial@10000000 {
+				device_type = "serial";
+				compatible = "ns16750", "ns16550";
+				reg = <0x10000000 0x00000008>;
+				virtual-reg = <0xe1000000>;
+				clock-frequency = <1851851>; // PCIe refclk/MCGC0_CTL[UART]
+				current-speed = <115200>;
+				interrupt-parent = <&MPIC>;
+				interrupts = <34 2>;
+			};
+
+			IIC0: i2c@00000000 {
+				compatible = "ibm,iic-currituck", "ibm,iic";
+				reg = <0x0 0x00000014>;
+				interrupt-parent = <&MPIC>;
+				interrupts = <79 2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+                                rtc@68 {
+                                        compatible = "stm,m41t80", "m41st85";
+                                        reg = <0x68>;
+                                };
+			};
+		};
+
+		PCIE0: pciex@10100000000 {		// 4xGBIF1
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x00000101 0x00000000 0x0 0x10000000		/* Config space access */
+			       0x00000100 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
+			dcr-reg = <0x80 0x20>;
+
+//                                pci_space  < pci_addr          > < cpu_addr          > < size       >
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000110 0x80000000 0x0 0x80000000
+			          0x01000000 0x0        0x0        0x00000140 0x0        0x0 0x00010000>;
+
+			/* Inbound starting at 0 to memsize filled in by zImage */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &MPIC 46 0x2 /* int A */
+				0x0 0x0 0x0 0x2 &MPIC 47 0x2 /* int B */
+				0x0 0x0 0x0 0x3 &MPIC 48 0x2 /* int C */
+				0x0 0x0 0x0 0x4 &MPIC 49 0x2 /* int D */>;
+		};
+
+		PCIE1: pciex@30100000000 {		// 4xGBIF0
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0x00000301 0x00000000 0x0 0x10000000		/* Config space access */
+			       0x00000300 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
+			dcr-reg = <0x60 0x20>;
+
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000310 0x80000000 0x0 0x80000000
+			          0x01000000 0x0        0x0        0x00000340 0x0        0x0 0x00010000>;
+
+			/* Inbound starting at 0 to memsize filled in by zImage */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &MPIC 38 0x2 /* int A */
+				0x0 0x0 0x0 0x2 &MPIC 39 0x2 /* int B */
+				0x0 0x0 0x0 0x3 &MPIC 40 0x2 /* int C */
+				0x0 0x0 0x0 0x4 &MPIC 41 0x2 /* int D */>;
+		};
+
+		PCIE2: pciex@38100000000 {		// 2xGBIF0
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+			primary;
+			port = <0x2>; /* port number */
+			reg = <0x00000381 0x00000000 0x0 0x10000000		/* Config space access */
+			       0x00000380 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
+			dcr-reg = <0xA0 0x20>;
+
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000390 0x80000000 0x0 0x80000000
+			          0x01000000 0x0        0x0        0x000003C0 0x0        0x0 0x00010000>;
+
+			/* Inbound starting at 0 to memsize filled in by zImage */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &MPIC 54 0x2 /* int A */
+				0x0 0x0 0x0 0x2 &MPIC 55 0x2 /* int B */
+				0x0 0x0 0x0 0x3 &MPIC 56 0x2 /* int C */
+				0x0 0x0 0x0 0x4 &MPIC 57 0x2 /* int D */>;
+		};
+
+	};
+
+	chosen {
+		linux,stdout-path = &UART0;
+	};
+};

arch/powerpc/boot/dts/klondike.dts

+/*
+ * Device Tree for Klondike (APM8018X) board.
+ *
+ * Copyright (c) 2010, Applied Micro Circuits Corporation
+ * Author: Tanmay Inamdar <tinamdar@apm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "apm,klondike";
+	compatible = "apm,klondike";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,apm8018x";
+			reg = <0x00000000>;
+			clock-frequency = <300000000>; /* Filled in by U-Boot */
+			timebase-frequency = <300000000>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>; /* 16 kB */
+			d-cache-size = <16384>; /* 16 kB */
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller {
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x010>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x010>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x010>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x0a 0x4 0x0b 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x010>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	plb {
+		compatible = "ibm,plb4";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: memory-controller {
+			compatible = "ibm,sdram-apm8018x";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <2>;
+			num-rx-chans = <16>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-parent = <&UIC1>;
+			interrupts = </*TXEOB*/   0x6 0x4
+					/*RXEOB*/ 0x7 0x4
+					/*SERR*/  0x1 0x4
+					/*TXDE*/  0x2 0x4
+					/*RXDE*/  0x3 0x4>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x20000000 0x20000000 0x30000000
+				  0x50000000 0x50000000 0x10000000
+				  0x60000000 0x60000000 0x10000000
+				  0xFE000000 0xFE000000 0x00010000>;
+			dcr-reg = <0x100 0x020>;
+			clock-frequency = <300000000>; /* Filled in by U-Boot */
+
+			RGMII0: emac-rgmii@400a2000 {
+				compatible = "ibm,rgmii";
+				reg = <0x400a2000 0x00000010>;
+				has-mdio;
+			};
+
+			TAH0: emac-tah@400a3000 {
+				compatible = "ibm,tah";
+				reg = <0x400a3000 0x100>;
+			};
+
+			TAH1: emac-tah@400a4000 {
+				compatible = "ibm,tah";
+				reg = <0x400a4000 0x100>;
+			};
+
+			EMAC0: ethernet@400a0000 {
+				compatible = "ibm,emac4", "ibm-emac4sync";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4>;
+				reg = <0x400a0000 0x00000100>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0x0>;
+				mal-rx-channel = <0x0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rgmii";
+				phy-address = <0x2>;
+				turbo = "no";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+				tah-device = <&TAH0>;
+				tah-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			EMAC1: ethernet@400a1000 {
+				compatible = "ibm,emac4", "ibm-emac4sync";
+				status = "disabled";
+				interrupt-parent = <&EMAC1>;
+				interrupts = <0x0>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x14 0x4>;
+				reg = <0x400a1000 0x00000100>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <8>;
+				cell-index = <1>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rgmii";
+				phy-address = <0x3>;
+				turbo = "no";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <1>;
+				tah-device = <&TAH1>;
+				tah-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@50001000";
+	};
+};

arch/powerpc/boot/treeboot-currituck.c

+/*
+ * Copyright © 2011 Tony Breeds IBM Corporation
+ *
+ * Based on earlier code:
+ *   Copyright (C) Paul Mackerras 1997.
+ *
+ *   Matt Porter <mporter@kernel.crashing.org>
+ *   Copyright 2002-2005 MontaVista Software Inc.
+ *
+ *   Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *   Copyright (c) 2003, 2004 Zultys Technologies
+ *
+ *    Copyright 2007 David Gibson, IBM Corporation.
+ *    Copyright 2010 Ben. Herrenschmidt, IBM Corporation.
+ *    Copyright © 2011 David Kleikamp IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <stdarg.h>
+#include <stddef.h>
+#include "types.h"
+#include "elf.h"
+#include "string.h"
+#include "stdio.h"
+#include "page.h"
+#include "ops.h"
+#include "reg.h"
+#include "io.h"
+#include "dcr.h"
+#include "4xx.h"
+#include "44x.h"
+#include "libfdt.h"
+
+BSS_STACK(4096);
+
+#define MAX_RANKS	0x4
+#define DDR3_MR0CF	0x80010011U
+
+static unsigned long long ibm_currituck_memsize;
+static unsigned long long ibm_currituck_detect_memsize(void)
+{
+	u32 reg;
+	unsigned i;
+	unsigned long long memsize = 0;
+
+	for(i = 0; i < MAX_RANKS; i++){
+		reg = mfdcrx(DDR3_MR0CF + i);
+
+		if (!(reg & 1))
+			continue;
+
+		reg &= 0x0000f000;
+		reg >>= 12;
+		memsize += (0x800000ULL << reg);
+	}
+
+	return memsize;
+}
+
+static void ibm_currituck_fixups(void)
+{
+	void *devp = finddevice("/");
+	u32 dma_ranges[7];
+
+	dt_fixup_memory(0x0ULL,  ibm_currituck_memsize);
+
+	while ((devp = find_node_by_devtype(devp, "pci"))) {
+		if (getprop(devp, "dma-ranges", dma_ranges, sizeof(dma_ranges)) < 0) {
+			printf("%s: Failed to get dma-ranges\r\n", __func__);
+			continue;
+		}
+
+		dma_ranges[5] = ibm_currituck_memsize >> 32;
+		dma_ranges[6] = ibm_currituck_memsize & 0xffffffffUL;
+
+		setprop(devp, "dma-ranges", dma_ranges, sizeof(dma_ranges));
+	}
+}
+
+#define SPRN_PIR	0x11E	/* Processor Indentification Register */
+void platform_init(void)
+{
+	unsigned long end_of_ram, avail_ram;
+	u32 pir_reg;
+	int node, size;
+	const u32 *timebase;
+
+	ibm_currituck_memsize = ibm_currituck_detect_memsize();
+	if (ibm_currituck_memsize >> 32)
+		end_of_ram = ~0UL;
+	else
+		end_of_ram = ibm_currituck_memsize;
+	avail_ram = end_of_ram - (unsigned long)_end;
+
+	simple_alloc_init(_end, avail_ram, 128, 64);
+	platform_ops.fixups = ibm_currituck_fixups;
+	platform_ops.exit = ibm44x_dbcr_reset;
+	pir_reg = mfspr(SPRN_PIR);
+
+	/* Make sure FDT blob is sane */
+	if (fdt_check_header(_dtb_start) != 0)
+		fatal("Invalid device tree blob\n");
+
+	node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type",
+	                                     "cpu", sizeof("cpu"));
+	if (!node)
+		fatal("Cannot find cpu node\n");
+	timebase = fdt_getprop(_dtb_start, node, "timebase-frequency", &size);
+	if (timebase && (size == 4))
+		timebase_period_ns = 1000000000 / *timebase;
+
+	fdt_set_boot_cpuid_phys(_dtb_start, pir_reg);
+	fdt_init(_dtb_start);
+
+	serial_console_init();
+}

arch/powerpc/boot/wrapper

@@ -244,6 +244,9 @@ gamecube|wii)
     link_address='0x600000'
     platformo="$object/$platform-head.o $object/$platform.o"
     ;;
+treeboot-currituck)
+    link_address='0x1000000'
+    ;;
 treeboot-iss4xx-mpic)
     platformo="$object/treeboot-iss4xx.o"
     ;;

arch/powerpc/configs/40x/klondike_defconfig

+CONFIG_40x=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_WALNUT is not set
+CONFIG_APM8018X=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_MATH_EMULATION=y
+# CONFIG_MIGRATION is not set
+# CONFIG_SUSPEND is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=35000
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_SAS_ATTRS=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_CRAMFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_AVERAGE=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_FTRACE is not set

arch/powerpc/configs/44x/currituck_defconfig

+CONFIG_44x=y
+CONFIG_SMP=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PPC_47x=y
+# CONFIG_EBONY is not set
+CONFIG_CURRITUCK=y
+CONFIG_HIGHMEM=y
+CONFIG_HZ_100=y
+CONFIG_MATH_EMULATION=y
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_CONNECTOR=y
+CONFIG_MTD=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+# CONFIG_SATA_PMP is not set
+CONFIG_SATA_SIL24=y
+# CONFIG_ATA_SFF is not set
+CONFIG_NETDEVICES=y
+CONFIG_E1000E=y
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_IBM_IIC=y
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_M41T80=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NLS_DEFAULT="n"
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_INFO=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_XMON=y
+CONFIG_XMON_DEFAULT=y
+CONFIG_PPC_EARLY_DEBUG=y
+CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0x10000000
+CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x200
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set

arch/powerpc/include/asm/reg.h

@@ -951,6 +951,7 @@
 #define PVR_403GCX	0x00201400
 #define PVR_405GP	0x40110000
 #define PVR_476		0x11a52000
+#define PVR_476FPE	0x7ff50000
 #define PVR_STB03XXX	0x40310000
 #define PVR_NP405H	0x41410000
 #define PVR_NP405L	0x41610000

arch/powerpc/kernel/cputable.c

@@ -1505,6 +1505,19 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_4xx,
 		.platform		= "ppc405",
 	},
+	{	/* APM8018X */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x7ff11432,
+		.cpu_name		= "APM8018X",
+		.cpu_features		= CPU_FTRS_40X,
+		.cpu_user_features	= PPC_FEATURE_32 |
+			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+		.mmu_features		= MMU_FTR_TYPE_40x,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.machine_check		= machine_check_4xx,
+		.platform		= "ppc405",
+	},
 	{	/* default match */
 		.pvr_mask		= 0x00000000,
 		.pvr_value		= 0x00000000,
@@ -1830,6 +1843,20 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_47x,
 		.platform		= "ppc470",
 	},
+	{ /* 476fpe */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x7ff50000,
+		.cpu_name		= "476fpe",
+		.cpu_features		= CPU_FTRS_47X | CPU_FTR_476_DD2,
+		.cpu_user_features	= COMMON_USER_BOOKE |
+			PPC_FEATURE_HAS_FPU,
+		.mmu_features		= MMU_FTR_TYPE_47x |
+			MMU_FTR_USE_TLBIVAX_BCAST | MMU_FTR_LOCK_BCAST_INVAL,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 128,
+		.machine_check		= machine_check_47x,
+		.platform		= "ppc470",
+	},
 	{ /* 476 iss */
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x00050000,

arch/powerpc/kernel/head_44x.S

@@ -732,6 +732,8 @@ _GLOBAL(init_cpu_state)
 	/* We use the PVR to differenciate 44x cores from 476 */
 	mfspr	r3,SPRN_PVR
 	srwi	r3,r3,16
+	cmplwi	cr0,r3,PVR_476FPE@h
+	beq	head_start_47x
 	cmplwi	cr0,r3,PVR_476@h
 	beq	head_start_47x
 	cmplwi	cr0,r3,PVR_476_ISS@h

arch/powerpc/mm/44x_mmu.c

@@ -78,11 +78,7 @@ static void __init ppc44x_pin_tlb(unsigned int virt, unsigned int phys)
 		"tlbwe	%1,%3,%5\n"
 		"tlbwe	%0,%3,%6\n"
 	:
-#ifdef CONFIG_PPC47x
-	: "r" (PPC47x_TLB2_S_RWX),
-#else
 	: "r" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G),
-#endif
 	  "r" (phys),
 	  "r" (virt | PPC44x_TLB_VALID | PPC44x_TLB_256M),
 	  "r" (entry),

arch/powerpc/platforms/40x/Kconfig

@@ -196,3 +196,14 @@ config IBM405_ERR51
 #	bool
 #	depends on !STB03xxx && PPC4xx_DMA
 #	default y
+#
+
+config APM8018X
+	bool "APM8018X"
+	depends on 40x
+	default n
+	select PPC40x_SIMPLE
+	help
+	  This option enables support for the AppliedMicro APM8018X evaluation
+	  board.
+

arch/powerpc/platforms/40x/ppc40x_simple.c

@@ -55,6 +55,7 @@ static const char *board[] __initdata = {
 	"amcc,haleakala",
 	"amcc,kilauea",
 	"amcc,makalu",
+	"apm,klondike",
 	"est,hotfoot",
 	"plathome,obs600"
 };

arch/powerpc/platforms/44x/Kconfig

@@ -186,6 +186,16 @@ config ISS4xx
 	help
 	  This option enables support for the IBM ISS simulation environment
 
+config CURRITUCK
+	bool "IBM Currituck (476fpe) Support"
+	depends on PPC_47x
+	default n
+	select SWIOTLB
+	select 476FPE
+	select PPC4xx_PCI_EXPRESS
+	help
+	  This option enables support for the IBM Currituck (476fpe) evaluation board
+
 config ICON
 	bool "Icon"
 	depends on 44x
@@ -308,6 +318,10 @@ config 460SX
 	select IBM_EMAC_ZMII
 	select IBM_EMAC_TAH
 
+config 476FPE
+	bool
+	select PPC_FPU
+
 config APM821xx
 	bool
 	select PPC_FPU

arch/powerpc/platforms/44x/Makefile

@@ -10,3 +10,4 @@ obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
 obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o
 obj-$(CONFIG_ISS4xx)	+= iss4xx.o
 obj-$(CONFIG_CANYONLANDS)+= canyonlands.o
+obj-$(CONFIG_CURRITUCK)	+= currituck.o

arch/powerpc/platforms/44x/currituck.c

+/*
+ * Currituck board specific routines
+ *
+ * Copyright © 2011 Tony Breeds IBM Corporation
+ *
+ * Based on earlier code:
+ *    Matt Porter <mporter@kernel.crashing.org>
+ *    Copyright 2002-2005 MontaVista Software Inc.
+ *
+ *    Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *    Copyright (c) 2003-2005 Zultys Technologies
+ *
+ *    Rewritten and ported to the merged powerpc tree:
+ *    Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
+ *    Copyright © 2011 David Kliekamp IBM Corporation
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/memblock.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/rtc.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/ppc4xx.h>
+#include <asm/mpic.h>
+#include <asm/mmu.h>
+
+#include <linux/pci.h>
+
+static __initdata struct of_device_id ppc47x_of_bus[] = {
+	{ .compatible = "ibm,plb4", },
+	{ .compatible = "ibm,plb6", },
+	{ .compatible = "ibm,opb", },
+	{ .compatible = "ibm,ebc", },
+	{},
+};
+
+/* The EEPROM is missing and the default values are bogus.  This forces USB in
+ * to EHCI mode */
+static void __devinit quirk_ppc_currituck_usb_fixup(struct pci_dev *dev)
+{
+	if (of_machine_is_compatible("ibm,currituck")) {
+		pci_write_config_dword(dev, 0xe0, 0x0114231f);
+		pci_write_config_dword(dev, 0xe4, 0x00006c40);
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(0x1033, 0x0035, quirk_ppc_currituck_usb_fixup);
+
+static int __init ppc47x_device_probe(void)
+{
+	of_platform_bus_probe(NULL, ppc47x_of_bus, NULL);
+
+	return 0;
+}
+machine_device_initcall(ppc47x, ppc47x_device_probe);
+
+/* We can have either UICs or MPICs */
+static void __init ppc47x_init_irq(void)
+{
+	struct device_node *np;
+
+	/* Find top level interrupt controller */
+	for_each_node_with_property(np, "interrupt-controller") {
+		if (of_get_property(np, "interrupts", NULL) == NULL)
+			break;
+	}
+	if (np == NULL)
+		panic("Can't find top level interrupt controller");
+
+	/* Check type and do appropriate initialization */
+	if (of_device_is_compatible(np, "chrp,open-pic")) {
+		/* The MPIC driver will get everything it needs from the
+		 * device-tree, just pass 0 to all arguments
+		 */
+		struct mpic *mpic =
+			mpic_alloc(np, 0, MPIC_PRIMARY, 0, 0, " MPIC     ");
+		BUG_ON(mpic == NULL);
+		mpic_init(mpic);
+		ppc_md.get_irq = mpic_get_irq;
+	} else
+		panic("Unrecognized top level interrupt controller");
+}
+
+#ifdef CONFIG_SMP
+static void __cpuinit smp_ppc47x_setup_cpu(int cpu)
+{
+	mpic_setup_this_cpu();
+}
+
+static int __cpuinit smp_ppc47x_kick_cpu(int cpu)
+{
+	struct device_node *cpunode = of_get_cpu_node(cpu, NULL);
+	const u64 *spin_table_addr_prop;
+	u32 *spin_table;
+	extern void start_secondary_47x(void);
+
+	BUG_ON(cpunode == NULL);
+
+	/* Assume spin table. We could test for the enable-method in
+	 * the device-tree but currently there's little point as it's
+	 * our only supported method
+	 */
+	spin_table_addr_prop =
+		of_get_property(cpunode, "cpu-release-addr", NULL);
+
+	if (spin_table_addr_prop == NULL) {
+		pr_err("CPU%d: Can't start, missing cpu-release-addr !\n",
+		       cpu);
+		return 1;
+	}
+
+	/* Assume it's mapped as part of the linear mapping. This is a bit
+	 * fishy but will work fine for now
+	 *
+	 * XXX: Is there any reason to assume differently?
+	 */
+	spin_table = (u32 *)__va(*spin_table_addr_prop);
+	pr_debug("CPU%d: Spin table mapped at %p\n", cpu, spin_table);
+
+	spin_table[3] = cpu;
+	smp_wmb();
+	spin_table[1] = __pa(start_secondary_47x);
+	mb();
+
+	return 0;
+}
+
+static struct smp_ops_t ppc47x_smp_ops = {
+	.probe		= smp_mpic_probe,
+	.message_pass	= smp_mpic_message_pass,
+	.setup_cpu	= smp_ppc47x_setup_cpu,
+	.kick_cpu	= smp_ppc47x_kick_cpu,
+	.give_timebase	= smp_generic_give_timebase,
+	.take_timebase	= smp_generic_take_timebase,
+};
+
+static void __init ppc47x_smp_init(void)
+{
+	if (mmu_has_feature(MMU_FTR_TYPE_47x))
+		smp_ops = &ppc47x_smp_ops;
+}
+
+#else /* CONFIG_SMP */
+static void __init ppc47x_smp_init(void) { }
+#endif /* CONFIG_SMP */
+
+static void __init ppc47x_setup_arch(void)
+{
+
+	/* No need to check the DMA config as we /know/ our windows are all of
+ 	 * RAM.  Lets hope that doesn't change */
+#ifdef CONFIG_SWIOTLB
+	if (memblock_end_of_DRAM() > 0xffffffff) {
+		ppc_swiotlb_enable = 1;
+		set_pci_dma_ops(&swiotlb_dma_ops);
+		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
+	}
+#endif
+	ppc47x_smp_init();
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init ppc47x_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (!of_flat_dt_is_compatible(root, "ibm,currituck"))
+		return 0;
+
+	return 1;
+}
+
+/* Use USB controller should have been hardware swizzled but it wasn't :( */
+static void ppc47x_pci_irq_fixup(struct pci_dev *dev)
+{
+	if (dev->vendor == 0x1033 && (dev->device == 0x0035 ||
+	                              dev->device == 0x00e0)) {
+		dev->irq = irq_create_mapping(NULL, 47);
+		pr_info("%s: Mapping irq 47 %d\n", __func__, dev->irq);
+	}
+}
+
+define_machine(ppc47x) {
+	.name			= "PowerPC 47x",
+	.probe			= ppc47x_probe,
+	.progress		= udbg_progress,
+	.init_IRQ		= ppc47x_init_irq,
+	.setup_arch		= ppc47x_setup_arch,
+	.pci_irq_fixup		= ppc47x_pci_irq_fixup,
+	.restart		= ppc4xx_reset_system,
+	.calibrate_decr		= generic_calibrate_decr,
+};

arch/powerpc/sysdev/ppc4xx_pci.c

@@ -185,9 +185,15 @@ static int __init ppc4xx_parse_dma_ranges(struct pci_controller *hose,
  out:
 	dma_offset_set = 1;
 	pci_dram_offset = res->start;
+	hose->dma_window_base_cur = res->start;
+	hose->dma_window_size = resource_size(res);
 
 	printk(KERN_INFO "4xx PCI DMA offset set to 0x%08lx\n",
 	       pci_dram_offset);
+	printk(KERN_INFO "4xx PCI DMA window base to 0x%016llx\n",
+	       (unsigned long long)hose->dma_window_base_cur);
+	printk(KERN_INFO "DMA window size 0x%016llx\n",
+	       (unsigned long long)hose->dma_window_size);
 	return 0;
 }
 
@@ -647,6 +653,7 @@ static unsigned int ppc4xx_pciex_port_count;
 
 struct ppc4xx_pciex_hwops
 {
+	bool want_sdr;
 	int (*core_init)(struct device_node *np);
 	int (*port_init_hw)(struct ppc4xx_pciex_port *port);
 	int (*setup_utl)(struct ppc4xx_pciex_port *port);
@@ -916,6 +923,7 @@ static int ppc440speB_pciex_init_utl(struct ppc4xx_pciex_port *port)
 
 static struct ppc4xx_pciex_hwops ppc440speA_pcie_hwops __initdata =
 {
+	.want_sdr	= true,
 	.core_init	= ppc440spe_pciex_core_init,
 	.port_init_hw	= ppc440speA_pciex_init_port_hw,
 	.setup_utl	= ppc440speA_pciex_init_utl,
@@ -924,6 +932,7 @@ static struct ppc4xx_pciex_hwops ppc440speA_pcie_hwops __initdata =
 
 static struct ppc4xx_pciex_hwops ppc440speB_pcie_hwops __initdata =
 {
+	.want_sdr	= true,
 	.core_init	= ppc440spe_pciex_core_init,
 	.port_init_hw	= ppc440speB_pciex_init_port_hw,
 	.setup_utl	= ppc440speB_pciex_init_utl,
@@ -1034,6 +1043,7 @@ static int ppc460ex_pciex_init_utl(struct ppc4xx_pciex_port *port)
 
 static struct ppc4xx_pciex_hwops ppc460ex_pcie_hwops __initdata =
 {
+	.want_sdr	= true,
 	.core_init	= ppc460ex_pciex_core_init,
 	.port_init_hw	= ppc460ex_pciex_init_port_hw,
 	.setup_utl	= ppc460ex_pciex_init_utl,
@@ -1181,6 +1191,7 @@ static void __init ppc460sx_pciex_check_link(struct ppc4xx_pciex_port *port)
 }
 
 static struct ppc4xx_pciex_hwops ppc460sx_pcie_hwops __initdata = {
+	.want_sdr	= true,
 	.core_init	= ppc460sx_pciex_core_init,
 	.port_init_hw	= ppc460sx_pciex_init_port_hw,
 	.setup_utl	= ppc460sx_pciex_init_utl,
@@ -1276,6 +1287,7 @@ static int ppc405ex_pciex_init_utl(struct ppc4xx_pciex_port *port)
 
 static struct ppc4xx_pciex_hwops ppc405ex_pcie_hwops __initdata =
 {
+	.want_sdr	= true,
 	.core_init	= ppc405ex_pciex_core_init,
 	.port_init_hw	= ppc405ex_pciex_init_port_hw,
 	.setup_utl	= ppc405ex_pciex_init_utl,
@@ -1284,6 +1296,52 @@ static struct ppc4xx_pciex_hwops ppc405ex_pcie_hwops __initdata =
 
 #endif /* CONFIG_40x */
 
+#ifdef CONFIG_476FPE
+static int __init ppc_476fpe_pciex_core_init(struct device_node *np)
+{
+	return 4;
+}
+
+static void __init ppc_476fpe_pciex_check_link(struct ppc4xx_pciex_port *port)
+{
+	u32 timeout_ms = 20;
+	u32 val = 0, mask = (PECFG_TLDLP_LNKUP|PECFG_TLDLP_PRESENT);
+	void __iomem *mbase = ioremap(port->cfg_space.start + 0x10000000,
+	                              0x1000);
+
+	printk(KERN_INFO "PCIE%d: Checking link...\n", port->index);
+
+	if (mbase == NULL) {
+		printk(KERN_WARNING "PCIE%d: failed to get cfg space\n",
+		                    port->index);
+		return;
+	}
+		
+	while (timeout_ms--) {
+		val = in_le32(mbase + PECFG_TLDLP);
+
+		if ((val & mask) == mask)
+			break;
+		msleep(10);
+	}
+
+	if (val & PECFG_TLDLP_PRESENT) {
+		printk(KERN_INFO "PCIE%d: link is up !\n", port->index);
+		port->link = 1;
+	} else
+		printk(KERN_WARNING "PCIE%d: Link up failed\n", port->index);
+
+	iounmap(mbase);
+	return;
+}
+
+static struct ppc4xx_pciex_hwops ppc_476fpe_pcie_hwops __initdata =
+{
+	.core_init	= ppc_476fpe_pciex_core_init,
+	.check_link	= ppc_476fpe_pciex_check_link,
+};
+#endif /* CONFIG_476FPE */
+
 /* Check that the core has been initied and if not, do it */
 static int __init ppc4xx_pciex_check_core_init(struct device_node *np)
 {
@@ -1308,6 +1366,10 @@ static int __init ppc4xx_pciex_check_core_init(struct device_node *np)
 #ifdef CONFIG_40x
 	if (of_device_is_compatible(np, "ibm,plb-pciex-405ex"))
 		ppc4xx_pciex_hwops = &ppc405ex_pcie_hwops;
+#endif
+#ifdef CONFIG_476FPE
+	if (of_device_is_compatible(np, "ibm,plb-pciex-476fpe"))
+		ppc4xx_pciex_hwops = &ppc_476fpe_pcie_hwops;
 #endif
 	if (ppc4xx_pciex_hwops == NULL) {
 		printk(KERN_WARNING "PCIE: unknown host type %s\n",
@@ -1617,6 +1679,10 @@ static int __init ppc4xx_setup_one_pciex_POM(struct ppc4xx_pciex_port	*port,
 			dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL,
 				sa | DCRO_PEGPL_460SX_OMR1MSKL_UOT
 					| DCRO_PEGPL_OMRxMSKL_VAL);
+		else if (of_device_is_compatible(port->node, "ibm,plb-pciex-476fpe"))
+			dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL,
+				sa | DCRO_PEGPL_476FPE_OMR1MSKL_UOT
+					| DCRO_PEGPL_OMRxMSKL_VAL);
 		else
 			dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL,
 				sa | DCRO_PEGPL_OMR1MSKL_UOT
@@ -1739,9 +1805,10 @@ static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port,
 		/* Calculate window size */
 		sa = (0xffffffffffffffffull << ilog2(size));
 		if (res->flags & IORESOURCE_PREFETCH)
-			sa |= 0x8;
+			sa |= PCI_BASE_ADDRESS_MEM_PREFETCH;
 
-		if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx"))
+		if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx") ||
+		    of_device_is_compatible(port->node, "ibm,plb-pciex-476fpe"))
 			sa |= PCI_BASE_ADDRESS_MEM_TYPE_64;
 
 		out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
@@ -1972,6 +2039,7 @@ static void __init ppc4xx_probe_pciex_bridge(struct device_node *np)
 	}
 
 	port->node = of_node_get(np);
+	if (ppc4xx_pciex_hwops->want_sdr) {
 		pval = of_get_property(np, "sdr-base", NULL);
 		if (pval == NULL) {
 			printk(KERN_ERR "PCIE: missing sdr-base for %s\n",
@@ -1979,6 +2047,7 @@ static void __init ppc4xx_probe_pciex_bridge(struct device_node *np)
 			return;
 		}
 		port->sdr_base = *pval;
+	}
 
 	/* Check if device_type property is set to "pci" or "pci-endpoint".
 	 * Resulting from this setup this PCIe port will be configured

arch/powerpc/sysdev/ppc4xx_pci.h

@@ -476,6 +476,13 @@
 #define DCRO_PEGPL_OMR1MSKL_UOT	 0x00000002
 #define DCRO_PEGPL_OMR3MSKL_IO	 0x00000002
 
+/* 476FPE */
+#define PCCFG_LCPA			0x270
+#define PECFG_TLDLP			0x3F8
+#define PECFG_TLDLP_LNKUP		0x00000008
+#define PECFG_TLDLP_PRESENT		0x00000010
+#define DCRO_PEGPL_476FPE_OMR1MSKL_UOT	 0x00000004
+
 /* SDR Bit Mappings */
 #define PESDRx_RCSSET_HLDPLB	0x10000000
 #define PESDRx_RCSSET_RSTGU	0x01000000