Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial

* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (21 commits)
  BUG_ON() Conversion in drivers/video/
  BUG_ON() Conversion in drivers/parisc/
  BUG_ON() Conversion in drivers/block/
  BUG_ON() Conversion in sound/sparc/cs4231.c
  BUG_ON() Conversion in drivers/s390/block/dasd.c
  BUG_ON() Conversion in lib/swiotlb.c
  BUG_ON() Conversion in kernel/cpu.c
  BUG_ON() Conversion in ipc/msg.c
  BUG_ON() Conversion in block/elevator.c
  BUG_ON() Conversion in fs/coda/
  BUG_ON() Conversion in fs/binfmt_elf_fdpic.c
  BUG_ON() Conversion in input/serio/hil_mlc.c
  BUG_ON() Conversion in md/dm-hw-handler.c
  BUG_ON() Conversion in md/bitmap.c
  The comment describing how MS_ASYNC works in msync.c is confusing
  rcu: undeclared variable used in documentation
  fix typos "wich" -> "which"
  typo patch for fs/ufs/super.c
  Fix simple typos
  tabify drivers/char/Makefile
  ...

Documentation/RCU/whatisRCU.txt

@@ -360,7 +360,7 @@ uses of RCU may be found in listRCU.txt, arrayRCU.txt, and NMI-RCU.txt.
 		struct foo *new_fp;
 		struct foo *old_fp;
 
-		new_fp = kmalloc(sizeof(*fp), GFP_KERNEL);
+		new_fp = kmalloc(sizeof(*new_fp), GFP_KERNEL);
 		spin_lock(&foo_mutex);
 		old_fp = gbl_foo;
 		*new_fp = *old_fp;
@@ -461,7 +461,7 @@ The foo_update_a() function might then be written as follows:
 		struct foo *new_fp;
 		struct foo *old_fp;
 
-		new_fp = kmalloc(sizeof(*fp), GFP_KERNEL);
+		new_fp = kmalloc(sizeof(*new_fp), GFP_KERNEL);
 		spin_lock(&foo_mutex);
 		old_fp = gbl_foo;
 		*new_fp = *old_fp;

Documentation/arm/Booting

@@ -118,7 +118,7 @@ to store page tables.  The recommended placement is 32KiB into RAM.
 
 In either case, the following conditions must be met:
 
-- Quiesce all DMA capable devicess so that memory does not get
+- Quiesce all DMA capable devices so that memory does not get
   corrupted by bogus network packets or disk data. This will save
   you many hours of debug.
 

Documentation/arm/README

@@ -89,7 +89,7 @@ Modules
   Although modularisation is supported (and required for the FP emulator),
   each module on an ARM2/ARM250/ARM3 machine when is loaded will take
   memory up to the next 32k boundary due to the size of the pages.
-  Therefore, modularisation on these machines really worth it?
+  Therefore, is modularisation on these machines really worth it?
 
   However, ARM6 and up machines allow modules to take multiples of 4k, and
   as such Acorn RiscPCs and other architectures using these processors can

Documentation/arm/Setup

@@ -58,7 +58,7 @@ below:
  video_y
 
    This describes the character position of cursor on VGA console, and
-   is otherwise unused. (should not used for other console types, and
+   is otherwise unused. (should not be used for other console types, and
    should not be used for other purposes).
 
  memc_control_reg

Documentation/filesystems/proc.txt

@@ -121,7 +121,7 @@ Table 1-1: Process specific entries in /proc
 ..............................................................................
  File    Content                                        
  cmdline Command line arguments                         
- cpu	 Current and last cpu in wich it was executed		(2.4)(smp)
+ cpu	 Current and last cpu in which it was executed		(2.4)(smp)
  cwd	 Link to the current working directory
  environ Values of environment variables      
  exe	 Link to the executable of this process
@@ -309,13 +309,13 @@ is the same by default:
   > cat /proc/irq/0/smp_affinity 
   ffffffff
 
-It's a bitmask, in wich you can specify wich CPUs can handle the IRQ, you can
+It's a bitmask, in which you can specify which CPUs can handle the IRQ, you can
 set it by doing:
 
   > echo 1 > /proc/irq/prof_cpu_mask
 
 This means that only the first CPU will handle the IRQ, but you can also echo 5
-wich means that only the first and fourth CPU can handle the IRQ.
+which means that only the first and fourth CPU can handle the IRQ.
 
 The way IRQs are routed is handled by the IO-APIC, and it's Round Robin
 between all the CPUs which are allowed to handle it. As usual the kernel has

Documentation/networking/packet_mmap.txt

@@ -40,7 +40,7 @@ network interface card supports some sort of interrupt load mitigation or
 + How to use CONFIG_PACKET_MMAP
 --------------------------------------------------------------------------------
 
-From the user standpoint, you should use the higher level libpcap library, wich
+From the user standpoint, you should use the higher level libpcap library, which
 is a de facto standard, portable across nearly all operating systems
 including Win32. 
 
@@ -217,8 +217,8 @@ called pg_vec, its size limits the number of blocks that can be allocated.
 
 kmalloc allocates any number of bytes of phisically contiguous memory from 
 a pool of pre-determined sizes. This pool of memory is mantained by the slab 
-allocator wich is at the end the responsible for doing the allocation and 
-hence wich imposes the maximum memory that kmalloc can allocate. 
+allocator which is at the end the responsible for doing the allocation and 
+hence which imposes the maximum memory that kmalloc can allocate. 
 
 In a 2.4/2.6 kernel and the i386 architecture, the limit is 131072 bytes. The 
 predetermined sizes that kmalloc uses can be checked in the "size-<bytes>" 
@@ -254,7 +254,7 @@ and, the number of frames be
 
 	<block number> * <block size> / <frame size>
 
-Suposse the following parameters, wich apply for 2.6 kernel and an
+Suposse the following parameters, which apply for 2.6 kernel and an
 i386 architecture:
 
 	<size-max> = 131072 bytes
@@ -360,7 +360,7 @@ TP_STATUS_LOSING      : indicates there were packet drops from last time
                         statistics where checked with getsockopt() and
                         the PACKET_STATISTICS option.
 
-TP_STATUS_CSUMNOTREADY: currently it's used for outgoing IP packets wich 
+TP_STATUS_CSUMNOTREADY: currently it's used for outgoing IP packets which 
                         it's checksum will be done in hardware. So while 
                         reading the packet we should not try to check the 
                         checksum. 

MAINTAINERS

@@ -2025,12 +2025,6 @@ L:	parisc-linux@parisc-linux.org
 W:	http://www.parisc-linux.org/
 S:	Maintained
 
-PERSONALITY HANDLING
-P:	Christoph Hellwig
-M:	hch@infradead.org
-L:	linux-abi-devel@lists.sourceforge.net
-S:	Maintained
-
 PCI ERROR RECOVERY
 P:	Linas Vepstas
 M:	linas@austin.ibm.com
@@ -2081,6 +2075,12 @@ M:	tsbogend@alpha.franken.de
 L:	netdev@vger.kernel.org
 S:	Maintained
 
+PERSONALITY HANDLING
+P:	Christoph Hellwig
+M:	hch@infradead.org
+L:	linux-abi-devel@lists.sourceforge.net
+S:	Maintained
+
 PHRAM MTD DRIVER
 P:	Jrn Engel
 M:	joern@wh.fh-wedel.de

block/elevator.c

@@ -728,8 +728,7 @@ void elv_unregister_queue(struct request_queue *q)
 int elv_register(struct elevator_type *e)
 {
 	spin_lock_irq(&elv_list_lock);
-	if (elevator_find(e->elevator_name))
-		BUG();
+	BUG_ON(elevator_find(e->elevator_name));
 	list_add_tail(&e->list, &elv_list);
 	spin_unlock_irq(&elv_list_lock);
 

drivers/acpi/Kconfig

@@ -256,7 +256,8 @@ config ACPI_CUSTOM_DSDT_FILE
 	depends on ACPI_CUSTOM_DSDT
 	default ""
 	help
-	  Enter the full path name to the file wich includes the AmlCode declaration.
+	  Enter the full path name to the file which includes the AmlCode
+	  declaration.
 
 config ACPI_BLACKLIST_YEAR
 	int "Disable ACPI for systems before Jan 1st this year" if X86_32

drivers/block/DAC960.c

@@ -228,8 +228,7 @@ static void *slice_dma_loaf(struct dma_loaf *loaf, size_t len,
 	void *cpu_end = loaf->cpu_free + len;
 	void *cpu_addr = loaf->cpu_free;
 
-	if (cpu_end > loaf->cpu_base + loaf->length)
-		BUG();
+	BUG_ON(cpu_end > loaf->cpu_base + loaf->length);
 	*dma_handle = loaf->dma_free;
 	loaf->cpu_free = cpu_end;
 	loaf->dma_free += len;

drivers/block/cciss.c

@@ -2361,8 +2361,7 @@ static void do_cciss_request(request_queue_t *q)
 	if (!creq)
 		goto startio;
 
-	if (creq->nr_phys_segments > MAXSGENTRIES)
-                BUG();
+	BUG_ON(creq->nr_phys_segments > MAXSGENTRIES);
 
 	if (( c = cmd_alloc(h, 1)) == NULL)
 		goto full;

drivers/block/cciss_scsi.c

@@ -1316,7 +1316,7 @@ cciss_scsi_queue_command (struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd
 
 	cp->Request.Timeout = 0;
 	memset(cp->Request.CDB, 0, sizeof(cp->Request.CDB));
-	if (cmd->cmd_len > sizeof(cp->Request.CDB)) BUG();
+	BUG_ON(cmd->cmd_len > sizeof(cp->Request.CDB));
 	cp->Request.CDBLen = cmd->cmd_len;
 	memcpy(cp->Request.CDB, cmd->cmnd, cmd->cmd_len);
 	cp->Request.Type.Type = TYPE_CMD;

drivers/block/cpqarray.c

@@ -906,8 +906,7 @@ static void do_ida_request(request_queue_t *q)
 	if (!creq)
 		goto startio;
 
-	if (creq->nr_phys_segments > SG_MAX)
-		BUG();
+	BUG_ON(creq->nr_phys_segments > SG_MAX);
 
 	if ((c = cmd_alloc(h,1)) == NULL)
 		goto startio;

drivers/char/Makefile

@@ -45,56 +45,57 @@ obj-$(CONFIG_HVC_CONSOLE)	+= hvc_console.o hvc_vio.o hvsi.o
 obj-$(CONFIG_RAW_DRIVER)	+= raw.o
 obj-$(CONFIG_SGI_SNSC)		+= snsc.o snsc_event.o
 obj-$(CONFIG_MMTIMER)		+= mmtimer.o
-obj-$(CONFIG_VIOCONS) += viocons.o
+obj-$(CONFIG_VIOCONS)		+= viocons.o
 obj-$(CONFIG_VIOTAPE)		+= viotape.o
 obj-$(CONFIG_HVCS)		+= hvcs.o
 obj-$(CONFIG_SGI_MBCS)		+= mbcs.o
 
-obj-$(CONFIG_PRINTER) += lp.o
-obj-$(CONFIG_TIPAR) += tipar.o
-
-obj-$(CONFIG_DTLK) += dtlk.o
-obj-$(CONFIG_R3964) += n_r3964.o
-obj-$(CONFIG_APPLICOM) += applicom.o
-obj-$(CONFIG_SONYPI) += sonypi.o
-obj-$(CONFIG_RTC) += rtc.o
-obj-$(CONFIG_HPET) += hpet.o
-obj-$(CONFIG_GEN_RTC) += genrtc.o
-obj-$(CONFIG_EFI_RTC) += efirtc.o
-obj-$(CONFIG_SGI_DS1286) += ds1286.o
-obj-$(CONFIG_SGI_IP27_RTC) += ip27-rtc.o
-obj-$(CONFIG_DS1302) += ds1302.o
-obj-$(CONFIG_S3C2410_RTC) += s3c2410-rtc.o
-obj-$(CONFIG_RTC_VR41XX) += vr41xx_rtc.o
+obj-$(CONFIG_PRINTER)		+= lp.o
+obj-$(CONFIG_TIPAR)		+= tipar.o
+
+obj-$(CONFIG_DTLK)		+= dtlk.o
+obj-$(CONFIG_R3964)		+= n_r3964.o
+obj-$(CONFIG_APPLICOM)		+= applicom.o
+obj-$(CONFIG_SONYPI)		+= sonypi.o
+obj-$(CONFIG_RTC)		+= rtc.o
+obj-$(CONFIG_HPET)		+= hpet.o
+obj-$(CONFIG_GEN_RTC)		+= genrtc.o
+obj-$(CONFIG_EFI_RTC)		+= efirtc.o
+obj-$(CONFIG_SGI_DS1286)	+= ds1286.o
+obj-$(CONFIG_SGI_IP27_RTC)	+= ip27-rtc.o
+obj-$(CONFIG_DS1302)		+= ds1302.o
+obj-$(CONFIG_S3C2410_RTC)	+= s3c2410-rtc.o
+obj-$(CONFIG_RTC_VR41XX)	+= vr41xx_rtc.o
 ifeq ($(CONFIG_GENERIC_NVRAM),y)
-  obj-$(CONFIG_NVRAM) += generic_nvram.o
+  obj-$(CONFIG_NVRAM)	+= generic_nvram.o
 else
-  obj-$(CONFIG_NVRAM) += nvram.o
+  obj-$(CONFIG_NVRAM)	+= nvram.o
 endif
-obj-$(CONFIG_TOSHIBA) += toshiba.o
-obj-$(CONFIG_I8K) += i8k.o
-obj-$(CONFIG_DS1620) += ds1620.o
-obj-$(CONFIG_HW_RANDOM) += hw_random.o
-obj-$(CONFIG_FTAPE) += ftape/
-obj-$(CONFIG_COBALT_LCD) += lcd.o
-obj-$(CONFIG_PPDEV) += ppdev.o
-obj-$(CONFIG_NWBUTTON) += nwbutton.o
-obj-$(CONFIG_NWFLASH) += nwflash.o
-obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o
-obj-$(CONFIG_CS5535_GPIO) += cs5535_gpio.o
-obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
-obj-$(CONFIG_TANBAC_TB0219) += tb0219.o
-obj-$(CONFIG_TELCLOCK) += tlclk.o
-
-obj-$(CONFIG_WATCHDOG)	+= watchdog/
-obj-$(CONFIG_MWAVE) += mwave/
-obj-$(CONFIG_AGP) += agp/
-obj-$(CONFIG_DRM) += drm/
-obj-$(CONFIG_PCMCIA) += pcmcia/
-obj-$(CONFIG_IPMI_HANDLER) += ipmi/
-
-obj-$(CONFIG_HANGCHECK_TIMER) += hangcheck-timer.o
-obj-$(CONFIG_TCG_TPM) += tpm/
+obj-$(CONFIG_TOSHIBA)		+= toshiba.o
+obj-$(CONFIG_I8K)		+= i8k.o
+obj-$(CONFIG_DS1620)		+= ds1620.o
+obj-$(CONFIG_HW_RANDOM)		+= hw_random.o
+obj-$(CONFIG_FTAPE)		+= ftape/
+obj-$(CONFIG_COBALT_LCD)	+= lcd.o
+obj-$(CONFIG_PPDEV)		+= ppdev.o
+obj-$(CONFIG_NWBUTTON)		+= nwbutton.o
+obj-$(CONFIG_NWFLASH)		+= nwflash.o
+obj-$(CONFIG_SCx200_GPIO)	+= scx200_gpio.o
+obj-$(CONFIG_CS5535_GPIO)	+= cs5535_gpio.o
+obj-$(CONFIG_GPIO_VR41XX)	+= vr41xx_giu.o
+obj-$(CONFIG_TANBAC_TB0219)	+= tb0219.o
+obj-$(CONFIG_TELCLOCK)		+= tlclk.o
+
+obj-$(CONFIG_WATCHDOG)		+= watchdog/
+obj-$(CONFIG_MWAVE)		+= mwave/
+obj-$(CONFIG_AGP)		+= agp/
+obj-$(CONFIG_DRM)		+= drm/
+obj-$(CONFIG_PCMCIA)		+= pcmcia/
+obj-$(CONFIG_IPMI_HANDLER)	+= ipmi/
+
+obj-$(CONFIG_HANGCHECK_TIMER)	+= hangcheck-timer.o
+obj-$(CONFIG_TCG_TPM)		+= tpm/
+
 # Files generated that shall be removed upon make clean
 clean-files := consolemap_deftbl.c defkeymap.c qtronixmap.c
 

drivers/input/serio/hil_mlc.c

@@ -556,7 +556,7 @@ static inline void hilse_setup_input(hil_mlc *mlc, struct hilse_node *node) {
 	do_gettimeofday(&(mlc->instart));
 	mlc->icount = 15;
 	memset(mlc->ipacket, 0, 16 * sizeof(hil_packet));
-	if (down_trylock(&(mlc->isem))) BUG();
+	BUG_ON(down_trylock(&(mlc->isem)));
 
 	return;
 }

drivers/isdn/i4l/isdn_x25iface.c

@@ -7,7 +7,7 @@
  *
  * stuff needed to support the Linux X.25 PLP code on top of devices that
  * can provide a lab_b service using the concap_proto mechanism.
- * This module supports a network interface wich provides lapb_sematics
+ * This module supports a network interface which provides lapb_sematics
  * -- as defined in Documentation/networking/x25-iface.txt -- to
  * the upper layer and assumes that the lower layer provides a reliable
  * data link service by means of the concap_device_ops callbacks.

drivers/md/bitmap.c

@@ -1309,7 +1309,7 @@ int bitmap_startwrite(struct bitmap *bitmap, sector_t offset, unsigned long sect
 		case 1:
 			*bmc = 2;
 		}
-		if ((*bmc & COUNTER_MAX) == COUNTER_MAX) BUG();
+		BUG_ON((*bmc & COUNTER_MAX) == COUNTER_MAX);
 		(*bmc)++;
 
 		spin_unlock_irq(&bitmap->lock);

drivers/md/dm-hw-handler.c

@@ -83,8 +83,7 @@ void dm_put_hw_handler(struct hw_handler_type *hwht)
 	if (--hwhi->use == 0)
 		module_put(hwhi->hwht.module);
 
-	if (hwhi->use < 0)
-		BUG();
+	BUG_ON(hwhi->use < 0);
 
       out:
 	up_read(&_hwh_lock);

drivers/parisc/sba_iommu.c

@@ -1724,9 +1724,7 @@ printk("sba_hw_init(): mem_boot 0x%x 0x%x 0x%x 0x%x\n", PAGE0->mem_boot.hpa,
 		sba_dev->chip_resv.start = PCI_F_EXTEND | 0xfef00000UL;
 		sba_dev->chip_resv.end   = PCI_F_EXTEND | (0xff000000UL - 1) ;
 		err = request_resource(&iomem_resource, &(sba_dev->chip_resv));
-		if (err < 0) {
-			BUG();
-		}
+		BUG_ON(err < 0);
 
 	} else if (IS_PLUTO(sba_dev->iodc)) {
 		int err;
@@ -2185,8 +2183,7 @@ void sba_directed_lmmio(struct parisc_device *pci_hba, struct resource *r)
 	int i;
 	int rope = (pci_hba->hw_path & (ROPES_PER_IOC-1));  /* rope # */
 
-	if ((t!=HPHW_IOA) && (t!=HPHW_BCPORT))
-		BUG();
+	BUG_ON((t!=HPHW_IOA) && (t!=HPHW_BCPORT));
 
 	r->start = r->end = 0;
 
@@ -2228,8 +2225,7 @@ void sba_distributed_lmmio(struct parisc_device *pci_hba, struct resource *r )
 	int base, size;
 	int rope = (pci_hba->hw_path & (ROPES_PER_IOC-1));  /* rope # */
 
-	if ((t!=HPHW_IOA) && (t!=HPHW_BCPORT))
-		BUG();
+	BUG_ON((t!=HPHW_IOA) && (t!=HPHW_BCPORT));
 
 	r->start = r->end = 0;
 

drivers/parisc/superio.c

@@ -157,8 +157,8 @@ superio_init(struct pci_dev *pcidev)
         if (sio->suckyio_irq_enabled)                                       
 		return;
 
-	if (!pdev) BUG();
-	if (!sio->usb_pdev) BUG();
+	BUG_ON(!pdev);
+	BUG_ON(!sio->usb_pdev);
 
 	/* use the IRQ iosapic found for USB INT D... */
 	pdev->irq = sio->usb_pdev->irq;
@@ -474,8 +474,7 @@ superio_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		dev->subsystem_vendor, dev->subsystem_device,
 		dev->class);
 
-	if (!sio->suckyio_irq_enabled)
-		BUG(); /* Enabled by PCI_FIXUP_FINAL */
+	BUG_ON(!sio->suckyio_irq_enabled);	/* Enabled by PCI_FIXUP_FINAL */
 
 	if (dev->device == PCI_DEVICE_ID_NS_87560_LIO) {	/* Function 1 */
 		superio_parport_init();

drivers/s390/block/dasd.c

@@ -541,9 +541,8 @@ dasd_kmalloc_request(char *magic, int cplength, int datasize,
 	struct dasd_ccw_req *cqr;
 
 	/* Sanity checks */
-	if ( magic == NULL || datasize > PAGE_SIZE ||
-	     (cplength*sizeof(struct ccw1)) > PAGE_SIZE)
-		BUG();
+	BUG_ON( magic == NULL || datasize > PAGE_SIZE ||
+	     (cplength*sizeof(struct ccw1)) > PAGE_SIZE);
 
 	cqr = kzalloc(sizeof(struct dasd_ccw_req), GFP_ATOMIC);
 	if (cqr == NULL)
@@ -583,9 +582,8 @@ dasd_smalloc_request(char *magic, int cplength, int datasize,
 	int size;
 
 	/* Sanity checks */
-	if ( magic == NULL || datasize > PAGE_SIZE ||
-	     (cplength*sizeof(struct ccw1)) > PAGE_SIZE)
-		BUG();
+	BUG_ON( magic == NULL || datasize > PAGE_SIZE ||
+	     (cplength*sizeof(struct ccw1)) > PAGE_SIZE);
 
 	size = (sizeof(struct dasd_ccw_req) + 7L) & -8L;
 	if (cplength > 0)

drivers/serial/mpc52xx_uart.c

@@ -40,7 +40,7 @@
  * and so on). So the PSC1 is mapped to /dev/ttyPSC0, PSC2 to /dev/ttyPSC1 and
  * so on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly
  * fpr the console code : without this 1:1 mapping, at early boot time, when we
- * are parsing the kernel args console=ttyPSC?, we wouldn't know wich PSC it
+ * are parsing the kernel args console=ttyPSC?, we wouldn't know which PSC it
  * will be mapped to.
  */
 

drivers/usb/serial/option.c

@@ -102,7 +102,7 @@ static struct usb_driver option_driver = {
 	.no_dynamic_id = 	1,
 };
 
-/* The card has three separate interfaces, wich the serial driver
+/* The card has three separate interfaces, which the serial driver
  * recognizes separately, thus num_port=1.
  */
 static struct usb_serial_driver option_3port_device = {

drivers/video/bw2.c

@@ -327,8 +327,7 @@ static void bw2_init_one(struct sbus_dev *sdev)
 	} else
 #else
 	{
-		if (!sdev)
-			BUG();
+		BUG_ON(!sdev);
 		all->par.physbase = sdev->reg_addrs[0].phys_addr;
 		resp = &sdev->resource[0];
 		sbusfb_fill_var(&all->info.var, (sdev ? sdev->prom_node : 0), 1);

drivers/video/ffb.c

@@ -466,8 +466,7 @@ static void ffb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
 	unsigned long flags;
 	u32 fg;
 
-	if (rect->rop != ROP_COPY && rect->rop != ROP_XOR)
-		BUG();
+	BUG_ON(rect->rop != ROP_COPY && rect->rop != ROP_XOR);
 
 	fg = ((u32 *)info->pseudo_palette)[rect->color];
 

drivers/video/sstfb.c

@@ -32,7 +32,7 @@
 
 -TODO: at one time or another test that the mode is acceptable by the monitor
 -ASK: Can I choose different ordering for the color bitfields (rgba argb ...)
-      wich one should i use ? is there any preferred one ? It seems ARGB is
+      which one should i use ? is there any preferred one ? It seems ARGB is
       the one ...
 -TODO: in  set_var check the validity of timings (hsync vsync)...
 -TODO: check and recheck the use of sst_wait_idle : we don't flush the fifo via

drivers/w1/masters/matrox_w1.c

@@ -98,7 +98,7 @@ static void matrox_w1_write_ddc_bit(void *, u8);
  *
  * Using tristate pins, since i can't find any open-drain pin in whole motherboard.
  * Unfortunately we can't connect to Intel's 82801xx IO controller
- * since we don't know motherboard schema, wich has pretty unused(may be not) GPIO.
+ * since we don't know motherboard schema, which has pretty unused(may be not) GPIO.
  *
  * I've heard that PIIX also has open drain pin.
  *

fs/befs/datastream.c

@@ -118,7 +118,7 @@ befs_fblock2brun(struct super_block *sb, befs_data_stream * data,
  * befs_read_lsmylink - read long symlink from datastream.
  * @sb: Filesystem superblock 
  * @ds: Datastrem to read from
- * @buf: Buffer in wich to place long symlink data
+ * @buf: Buffer in which to place long symlink data
  * @len: Length of the long symlink in bytes
  *
  * Returns the number of bytes read

fs/binfmt_elf_fdpic.c

@@ -572,8 +572,7 @@ static int create_elf_fdpic_tables(struct linux_binprm *bprm,
 	csp -= sizeof(unsigned long);
 	__put_user(bprm->argc, (unsigned long *) csp);
 
-	if (csp != sp)
-		BUG();
+	BUG_ON(csp != sp);
 
 	/* fill in the argv[] array */
 #ifdef CONFIG_MMU

fs/coda/cache.c

@@ -51,7 +51,7 @@ void coda_cache_clear_all(struct super_block *sb)
         struct coda_sb_info *sbi;
 
         sbi = coda_sbp(sb);
-        if (!sbi) BUG();
+	BUG_ON(!sbi);
 
 	atomic_inc(&permission_epoch);
 }

fs/coda/cnode.c

@@ -120,8 +120,7 @@ void coda_replace_fid(struct inode *inode, struct CodaFid *oldfid,
 	
 	cii = ITOC(inode);
 
-	if (!coda_fideq(&cii->c_fid, oldfid))
-		BUG();
+	BUG_ON(!coda_fideq(&cii->c_fid, oldfid));
 
 	/* replace fid and rehash inode */
 	/* XXX we probably need to hold some lock here! */

fs/ufs/super.c

@@ -575,7 +575,7 @@ static int ufs_fill_super(struct super_block *sb, void *data, int silent)
 		if (!silent)
 			printk("You didn't specify the type of your ufs filesystem\n\n"
 			"mount -t ufs -o ufstype="
-			"sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|netxstep-cd|openstep ...\n\n"
+			"sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...\n\n"
 			">>>WARNING<<< Wrong ufstype may corrupt your filesystem, "
 			"default is ufstype=old\n");
 		ufs_set_opt (sbi->s_mount_opt, UFSTYPE_OLD);

include/linux/timer.h

@@ -69,13 +69,13 @@ extern unsigned long next_timer_interrupt(void);
  * @timer: the timer to be added
  *
  * The kernel will do a ->function(->data) callback from the
- * timer interrupt at the ->expired point in the future. The
+ * timer interrupt at the ->expires point in the future. The
  * current time is 'jiffies'.
  *
- * The timer's ->expired, ->function (and if the handler uses it, ->data)
+ * The timer's ->expires, ->function (and if the handler uses it, ->data)
  * fields must be set prior calling this function.
  *
- * Timers with an ->expired field in the past will be executed in the next
+ * Timers with an ->expires field in the past will be executed in the next
  * timer tick.
  */
 static inline void add_timer(struct timer_list *timer)

ipc/msg.c

@@ -220,8 +220,7 @@ asmlinkage long sys_msgget (key_t key, int msgflg)
 		ret = -EEXIST;
 	} else {
 		msq = msg_lock(id);
-		if(msq==NULL)
-			BUG();
+		BUG_ON(msq==NULL);
 		if (ipcperms(&msq->q_perm, msgflg))
 			ret = -EACCES;
 		else {

kernel/cpu.c

@@ -223,8 +223,7 @@ int __devinit cpu_up(unsigned int cpu)
 	ret = __cpu_up(cpu);
 	if (ret != 0)
 		goto out_notify;
-	if (!cpu_online(cpu))
-		BUG();
+	BUG_ON(!cpu_online(cpu));
 
 	/* Now call notifier in preparation. */
 	notifier_call_chain(&cpu_chain, CPU_ONLINE, hcpu);

lib/swiotlb.c

@@ -296,8 +296,7 @@ map_single(struct device *hwdev, char *buffer, size_t size, int dir)
 	else
 		stride = 1;
 
-	if (!nslots)
-		BUG();
+	BUG_ON(!nslots);
 
 	/*
 	 * Find suitable number of IO TLB entries size that will fit this
@@ -416,14 +415,14 @@ sync_single(struct device *hwdev, char *dma_addr, size_t size,
 	case SYNC_FOR_CPU:
 		if (likely(dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL))
 			memcpy(buffer, dma_addr, size);
-		else if (dir != DMA_TO_DEVICE)
-			BUG();
+		else
+			BUG_ON(dir != DMA_TO_DEVICE);
 		break;
 	case SYNC_FOR_DEVICE:
 		if (likely(dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL))
 			memcpy(dma_addr, buffer, size);
-		else if (dir != DMA_FROM_DEVICE)
-			BUG();
+		else
+			BUG_ON(dir != DMA_FROM_DEVICE);
 		break;
 	default:
 		BUG();
@@ -529,8 +528,7 @@ swiotlb_map_single(struct device *hwdev, void *ptr, size_t size, int dir)
 	unsigned long dev_addr = virt_to_phys(ptr);
 	void *map;
 
-	if (dir == DMA_NONE)
-		BUG();
+	BUG_ON(dir == DMA_NONE);
 	/*
 	 * If the pointer passed in happens to be in the device's DMA window,
 	 * we can safely return the device addr and not worry about bounce
@@ -592,8 +590,7 @@ swiotlb_unmap_single(struct device *hwdev, dma_addr_t dev_addr, size_t size,
 {
 	char *dma_addr = phys_to_virt(dev_addr);
 
-	if (dir == DMA_NONE)
-		BUG();
+	BUG_ON(dir == DMA_NONE);
 	if (dma_addr >= io_tlb_start && dma_addr < io_tlb_end)
 		unmap_single(hwdev, dma_addr, size, dir);
 	else if (dir == DMA_FROM_DEVICE)
@@ -616,8 +613,7 @@ swiotlb_sync_single(struct device *hwdev, dma_addr_t dev_addr,
 {
 	char *dma_addr = phys_to_virt(dev_addr);
 
-	if (dir == DMA_NONE)
-		BUG();
+	BUG_ON(dir == DMA_NONE);
 	if (dma_addr >= io_tlb_start && dma_addr < io_tlb_end)
 		sync_single(hwdev, dma_addr, size, dir, target);
 	else if (dir == DMA_FROM_DEVICE)
@@ -648,8 +644,7 @@ swiotlb_sync_single_range(struct device *hwdev, dma_addr_t dev_addr,
 {
 	char *dma_addr = phys_to_virt(dev_addr) + offset;
 
-	if (dir == DMA_NONE)
-		BUG();
+	BUG_ON(dir == DMA_NONE);
 	if (dma_addr >= io_tlb_start && dma_addr < io_tlb_end)
 		sync_single(hwdev, dma_addr, size, dir, target);
 	else if (dir == DMA_FROM_DEVICE)
@@ -696,8 +691,7 @@ swiotlb_map_sg(struct device *hwdev, struct scatterlist *sg, int nelems,
 	unsigned long dev_addr;
 	int i;
 
-	if (dir == DMA_NONE)
-		BUG();
+	BUG_ON(dir == DMA_NONE);
 
 	for (i = 0; i < nelems; i++, sg++) {
 		addr = SG_ENT_VIRT_ADDRESS(sg);
@@ -730,8 +724,7 @@ swiotlb_unmap_sg(struct device *hwdev, struct scatterlist *sg, int nelems,
 {
 	int i;
 
-	if (dir == DMA_NONE)
-		BUG();
+	BUG_ON(dir == DMA_NONE);
 
 	for (i = 0; i < nelems; i++, sg++)
 		if (sg->dma_address != SG_ENT_PHYS_ADDRESS(sg))
@@ -753,8 +746,7 @@ swiotlb_sync_sg(struct device *hwdev, struct scatterlist *sg,
 {
 	int i;
 
-	if (dir == DMA_NONE)
-		BUG();
+	BUG_ON(dir == DMA_NONE);
 
 	for (i = 0; i < nelems; i++, sg++)
 		if (sg->dma_address != SG_ENT_PHYS_ADDRESS(sg))

mm/msync.c

@@ -126,7 +126,7 @@ static unsigned long msync_page_range(struct vm_area_struct *vma,
  * write out the dirty pages and wait on the writeout and check the result.
  * Or the application may run fadvise(FADV_DONTNEED) against the fd to start
  * async writeout immediately.
- * So my _not_ starting I/O in MS_ASYNC we provide complete flexibility to
+ * So by _not_ starting I/O in MS_ASYNC we provide complete flexibility to
  * applications.
  */
 static int msync_interval(struct vm_area_struct *vma, unsigned long addr,

scripts/Makefile.modpost

@@ -4,7 +4,7 @@
 #
 # Stage one of module building created the following:
 # a) The individual .o files used for the module
-# b) A <module>.o file wich is the .o files above linked together
+# b) A <module>.o file which is the .o files above linked together
 # c) A <module>.mod file in $(MODVERDIR)/, listing the name of the
 #    the preliminary <module>.o file, plus all .o files
 

sound/sparc/cs4231.c

@@ -611,8 +611,7 @@ static void snd_cs4231_advance_dma(struct cs4231_dma_control *dma_cont,
 		unsigned int period_size = snd_pcm_lib_period_bytes(substream);
 		unsigned int offset = period_size * (*periods_sent);
 
-		if (period_size >= (1 << 24))
-			BUG();
+		BUG_ON(period_size >= (1 << 24));
 
 		if (dma_cont->request(dma_cont, runtime->dma_addr + offset, period_size))
 			return;
@@ -1079,8 +1078,7 @@ static int snd_cs4231_playback_prepare(struct snd_pcm_substream *substream)
 	chip->image[CS4231_IFACE_CTRL] &= ~(CS4231_PLAYBACK_ENABLE |
 					    CS4231_PLAYBACK_PIO);
 
-	if (runtime->period_size > 0xffff + 1)
-		BUG();
+	BUG_ON(runtime->period_size > 0xffff + 1);
 
 	chip->p_periods_sent = 0;
 	spin_unlock_irqrestore(&chip->lock, flags);